[net-next,12/13] selftests: forwarding: Add Q-in-VNI test

Message ID	20201208092253.1996011-13-idosch@idosch.org
State	New
Headers	show Return-Path: <netdev-owner@kernel.org> From: Ido Schimmel <idosch@idosch.org> To: netdev@vger.kernel.org Cc: davem@davemloft.net, kuba@kernel.org, jiri@nvidia.com, petrm@nvidia.com, amcohen@nvidia.com, mlxsw@nvidia.com, Ido Schimmel <idosch@nvidia.com> Subject: [PATCH net-next 12/13] selftests: forwarding: Add Q-in-VNI test Date: Tue, 8 Dec 2020 11:22:52 +0200 Message-Id: <20201208092253.1996011-13-idosch@idosch.org> In-Reply-To: <20201208092253.1996011-1-idosch@idosch.org> References: <20201208092253.1996011-1-idosch@idosch.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	mlxsw: Add support for Q-in-VNI \| expand [net-next,00/13] mlxsw: Add support for Q-in-VNI [net-next,03/13] mlxsw: reg: Add support for tunnel port in SPVID register [net-next,06/13] mlxsw: Save EtherType as part of mlxsw_sp_nve_config [net-next,07/13] mlxsw: spectrum: Publish mlxsw_sp_ethtype_to_sver_type() [net-next,08/13] mlxsw: spectrum_nve_vxlan: Add support for Q-in-VNI for Spectrum-2 ASIC [net-next,10/13] mlxsw: Veto Q-in-VNI for Spectrum-1 ASIC [net-next,12/13] selftests: forwarding: Add Q-in-VNI test

diff --git a/tools/testing/selftests/net/forwarding/q_in_vni.sh b/tools/testing/selftests/net/forwarding/q_in_vni.sh new file mode 100755 index 000000000000..4c50c0234bce --- /dev/null +++ b/tools/testing/selftests/net/forwarding/q_in_vni.sh @@ -0,0 +1,347 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# +-----------------------+ +------------------------+ +# | H1 (vrf) | | H2 (vrf) | +# | + $h1.10 | | + $h2.10 | +# | | 192.0.2.1/28 | | | 192.0.2.2/28 | +# | | | | | | +# | | + $h1.20 | | | + $h2.20 | +# | \ | 198.51.100.1/24 | | \ | 198.51.100.2/24 | +# | \| | | \| | +# | + $h1 | | + $h2 | +# +----|------------------+ +----|-------------------+ +# | | +# +----|--------------------------------------------------|-------------------+ +# | SW | | | +# | +--|--------------------------------------------------|-----------------+ | +# | | + $swp1 BR1 (802.1ad) + $swp2 | | +# | | vid 100 pvid untagged vid 100 pvid | | +# | | untagged | | +# | | + vx100 (vxlan) | | +# | | local 192.0.2.17 | | +# | | remote 192.0.2.34 192.0.2.50 | | +# | | id 1000 dstport $VXPORT | | +# | | vid 100 pvid untagged | | +# | +-----------------------------------------------------------------------+ | +# | | +# | 192.0.2.32/28 via 192.0.2.18 | +# | 192.0.2.48/28 via 192.0.2.18 | +# | | +# | + $rp1 | +# | | 192.0.2.17/28 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | VRP2 (vrf) | +# | + $rp2 | +# | 192.0.2.18/28 | +# | | (maybe) HW +# ============================================================================= +# | | (likely) SW +# | + v1 (veth) + v3 (veth) | +# | | 192.0.2.33/28 | 192.0.2.49/28 | +# +----|---------------------------------------|----------------+ +# | | +# +----|------------------------------+ +----|------------------------------+ +# | + v2 (veth) NS1 (netns) | | + v4 (veth) NS2 (netns) | +# | 192.0.2.34/28 | | 192.0.2.50/28 | +# | | | | +# | 192.0.2.16/28 via 192.0.2.33 | | 192.0.2.16/28 via 192.0.2.49 | +# | 192.0.2.50/32 via 192.0.2.33 | | 192.0.2.34/32 via 192.0.2.49 | +# | | | | +# | +-------------------------------+ | | +-------------------------------+ | +# | | BR2 (802.1ad) | | | | BR2 (802.1ad) | | +# | | + vx100 (vxlan) | | | | + vx100 (vxlan) | | +# | | local 192.0.2.34 | | | | local 192.0.2.50 | | +# | | remote 192.0.2.17 | | | | remote 192.0.2.17 | | +# | | remote 192.0.2.50 | | | | remote 192.0.2.34 | | +# | | id 1000 dstport $VXPORT | | | | id 1000 dstport $VXPORT | | +# | | vid 100 pvid untagged | | | | vid 100 pvid untagged | | +# | | | | | | | | +# | | + w1 (veth) | | | | + w1 (veth) | | +# | | | vid 100 pvid untagged | | | | | vid 100 pvid untagged | | +# | +--|----------------------------+ | | +--|----------------------------+ | +# | | | | | | +# | +--|----------------------------+ | | +--|----------------------------+ | +# | | | VW2 (vrf) | | | | | VW2 (vrf) | | +# | | + w2 (veth) | | | | + w2 (veth) | | +# | | |\ | | | | |\ | | +# | | | + w2.10 | | | | | + w2.10 | | +# | | | 192.0.2.3/28 | | | | | 192.0.2.4/28 | | +# | | | | | | | | | | +# | | + w2.20 | | | | + w2.20 | | +# | | 198.51.100.3/24 | | | | 198.51.100.4/24 | | +# | +-------------------------------+ | | +-------------------------------+ | +# +-----------------------------------+ +-----------------------------------+ + +: ${VXPORT:=4789} +export VXPORT + +: ${ALL_TESTS:=" + ping_ipv4 + "} + +NUM_NETIFS=6 +source lib.sh + +h1_create() +{ + simple_if_init $h1 + tc qdisc add dev $h1 clsact + vlan_create $h1 10 v$h1 192.0.2.1/28 + vlan_create $h1 20 v$h1 198.51.100.1/24 +} + +h1_destroy() +{ + vlan_destroy $h1 20 + vlan_destroy $h1 10 + tc qdisc del dev $h1 clsact + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + tc qdisc add dev $h2 clsact + vlan_create $h2 10 v$h2 192.0.2.2/28 + vlan_create $h2 20 v$h2 198.51.100.2/24 +} + +h2_destroy() +{ + vlan_destroy $h2 20 + vlan_destroy $h2 10 + tc qdisc del dev $h2 clsact + simple_if_fini $h2 +} + +rp1_set_addr() +{ + ip address add dev $rp1 192.0.2.17/28 + + ip route add 192.0.2.32/28 nexthop via 192.0.2.18 + ip route add 192.0.2.48/28 nexthop via 192.0.2.18 +} + +rp1_unset_addr() +{ + ip route del 192.0.2.48/28 nexthop via 192.0.2.18 + ip route del 192.0.2.32/28 nexthop via 192.0.2.18 + + ip address del dev $rp1 192.0.2.17/28 +} + +switch_create() +{ + ip link add name br1 type bridge vlan_filtering 1 vlan_protocol 802.1ad \ + vlan_default_pvid 0 mcast_snooping 0 + # Make sure the bridge uses the MAC address of the local port and not + # that of the VxLAN's device. + ip link set dev br1 address $(mac_get $swp1) + ip link set dev br1 up + + ip link set dev $rp1 up + rp1_set_addr + + ip link add name vx100 type vxlan id 1000 \ + local 192.0.2.17 dstport "$VXPORT" \ + nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx100 up + + ip link set dev vx100 master br1 + bridge vlan add vid 100 dev vx100 pvid untagged + + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + bridge vlan add vid 100 dev $swp1 pvid untagged + + ip link set dev $swp2 master br1 + ip link set dev $swp2 up + bridge vlan add vid 100 dev $swp2 pvid untagged + + bridge fdb append dev vx100 00:00:00:00:00:00 dst 192.0.2.34 self + bridge fdb append dev vx100 00:00:00:00:00:00 dst 192.0.2.50 self +} + +switch_destroy() +{ + bridge fdb del dev vx100 00:00:00:00:00:00 dst 192.0.2.50 self + bridge fdb del dev vx100 00:00:00:00:00:00 dst 192.0.2.34 self + + bridge vlan del vid 100 dev $swp2 + ip link set dev $swp2 down + ip link set dev $swp2 nomaster + + bridge vlan del vid 100 dev $swp1 + ip link set dev $swp1 down + ip link set dev $swp1 nomaster + + ip link set dev vx100 nomaster + ip link set dev vx100 down + ip link del dev vx100 + + rp1_unset_addr + ip link set dev $rp1 down + + ip link set dev br1 down + ip link del dev br1 +} + +vrp2_create() +{ + simple_if_init $rp2 192.0.2.18/28 + __simple_if_init v1 v$rp2 192.0.2.33/28 + __simple_if_init v3 v$rp2 192.0.2.49/28 + tc qdisc add dev v1 clsact +} + +vrp2_destroy() +{ + tc qdisc del dev v1 clsact + __simple_if_fini v3 192.0.2.49/28 + __simple_if_fini v1 192.0.2.33/28 + simple_if_fini $rp2 192.0.2.18/28 +} + +ns_init_common() +{ + local in_if=$1; shift + local in_addr=$1; shift + local other_in_addr=$1; shift + local nh_addr=$1; shift + local host_addr1=$1; shift + local host_addr2=$1; shift + + ip link set dev $in_if up + ip address add dev $in_if $in_addr/28 + tc qdisc add dev $in_if clsact + + ip link add name br2 type bridge vlan_filtering 1 vlan_protocol 802.1ad \ + vlan_default_pvid 0 + ip link set dev br2 up + + ip link add name w1 type veth peer name w2 + + ip link set dev w1 master br2 + ip link set dev w1 up + bridge vlan add vid 100 dev w1 pvid untagged + + ip link add name vx100 type vxlan id 1000 local $in_addr \ + dstport "$VXPORT" + ip link set dev vx100 up + bridge fdb append dev vx100 00:00:00:00:00:00 dst 192.0.2.17 self + bridge fdb append dev vx100 00:00:00:00:00:00 dst $other_in_addr self + + ip link set dev vx100 master br2 + tc qdisc add dev vx100 clsact + + bridge vlan add vid 100 dev vx100 pvid untagged + + simple_if_init w2 + vlan_create w2 10 vw2 $host_addr1/28 + vlan_create w2 20 vw2 $host_addr2/24 + + ip route add 192.0.2.16/28 nexthop via $nh_addr + ip route add $other_in_addr/32 nexthop via $nh_addr +} +export -f ns_init_common + +ns1_create() +{ + ip netns add ns1 + ip link set dev v2 netns ns1 + in_ns ns1 \ + ns_init_common v2 192.0.2.34 192.0.2.50 192.0.2.33 \ + 192.0.2.3 198.51.100.3 +} + +ns1_destroy() +{ + ip netns exec ns1 ip link set dev v2 netns 1 + ip netns del ns1 +} + +ns2_create() +{ + ip netns add ns2 + ip link set dev v4 netns ns2 + in_ns ns2 \ + ns_init_common v4 192.0.2.50 192.0.2.34 192.0.2.49 \ + 192.0.2.4 198.51.100.4 +} + +ns2_destroy() +{ + ip netns exec ns2 ip link set dev v4 netns 1 + ip netns del ns2 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + rp1=${NETIFS[p5]} + rp2=${NETIFS[p6]} + + vrf_prepare + forwarding_enable + + h1_create + h2_create + switch_create + + ip link add name v1 type veth peer name v2 + ip link add name v3 type veth peer name v4 + vrp2_create + ns1_create + ns2_create + + r1_mac=$(in_ns ns1 mac_get w2) + r2_mac=$(in_ns ns2 mac_get w2) + h2_mac=$(mac_get $h2) +} + +cleanup() +{ + pre_cleanup + + ns2_destroy + ns1_destroy + vrp2_destroy + ip link del dev v3 + ip link del dev v1 + + switch_destroy + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.2 ": local->local" + ping_test $h1 192.0.2.3 ": local->remote 1" + ping_test $h1 192.0.2.4 ": local->remote 2" +} + +test_all() +{ + echo "Running tests with UDP port $VXPORT" + tests_run +} + +trap cleanup EXIT + +setup_prepare +setup_wait +test_all + +exit $EXIT_STATUS

[net-next,12/13] selftests: forwarding: Add Q-in-VNI test

Commit Message

Patch