diff mbox series

[net-next,05/19] net: phy: at803x: remove the use of .ack_interrupt()

Message ID 20201029100741.462818-6-ciorneiioana@gmail.com
State New
Headers show
Series net: phy: add support for shared interrupts (part 1) | expand

Commit Message

Ioana Ciornei Oct. 29, 2020, 10:07 a.m. UTC 
From: Ioana Ciornei <ioana.ciornei@nxp.com>

In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.

This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.

Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
 drivers/net/phy/at803x.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 106c6f53755f..aba198adf62d 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -614,6 +614,11 @@  static int at803x_config_intr(struct phy_device *phydev)
 	value = phy_read(phydev, AT803X_INTR_ENABLE);
 
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		/* Clear any pending interrupts */
+		err = at803x_ack_interrupt(phydev);
+		if (err)
+			return err;
+
 		value |= AT803X_INTR_ENABLE_AUTONEG_ERR;
 		value |= AT803X_INTR_ENABLE_SPEED_CHANGED;
 		value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
@@ -621,9 +626,14 @@  static int at803x_config_intr(struct phy_device *phydev)
 		value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
 
 		err = phy_write(phydev, AT803X_INTR_ENABLE, value);
-	}
-	else
+	} else {
 		err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
+		if (err)
+			return err;
+
+		/* Clear any pending interrupts */
+		err = at803x_ack_interrupt(phydev);
+	}
 
 	return err;
 }
@@ -1080,7 +1090,6 @@  static struct phy_driver at803x_driver[] = {
 	.resume			= at803x_resume,
 	/* PHY_GBIT_FEATURES */
 	.read_status		= at803x_read_status,
-	.ack_interrupt		= at803x_ack_interrupt,
 	.config_intr		= at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.get_tunable		= at803x_get_tunable,
@@ -1101,7 +1110,6 @@  static struct phy_driver at803x_driver[] = {
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
 	/* PHY_BASIC_FEATURES */
-	.ack_interrupt		= at803x_ack_interrupt,
 	.config_intr		= at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 }, {
@@ -1120,7 +1128,6 @@  static struct phy_driver at803x_driver[] = {
 	/* PHY_GBIT_FEATURES */
 	.read_status		= at803x_read_status,
 	.aneg_done		= at803x_aneg_done,
-	.ack_interrupt		= &at803x_ack_interrupt,
 	.config_intr		= &at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.get_tunable		= at803x_get_tunable,
@@ -1141,7 +1148,6 @@  static struct phy_driver at803x_driver[] = {
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
 	/* PHY_BASIC_FEATURES */
-	.ack_interrupt		= at803x_ack_interrupt,
 	.config_intr		= at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.cable_test_start	= at803x_cable_test_start,
@@ -1154,7 +1160,6 @@  static struct phy_driver at803x_driver[] = {
 	.resume			= at803x_resume,
 	.flags			= PHY_POLL_CABLE_TEST,
 	/* PHY_BASIC_FEATURES */
-	.ack_interrupt		= &at803x_ack_interrupt,
 	.config_intr		= &at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.cable_test_start	= at803x_cable_test_start,