@@ -1286,7 +1286,7 @@ S: Supported
F: Documentation/devicetree/bindings/net/apm-xgene-enet.txt
F: Documentation/devicetree/bindings/net/apm-xgene-mdio.txt
F: drivers/net/ethernet/apm/xgene/
-F: drivers/net/phy/mdio-xgene.c
+F: drivers/net/mdio/mdio-xgene.c
APPLIED MICRO (APM) X-GENE SOC PMU
M: Khuong Dinh <khuong@os.amperecomputing.com>
@@ -6513,12 +6513,14 @@ F: Documentation/devicetree/bindings/net/ethernet-phy.yaml
F: Documentation/devicetree/bindings/net/mdio*
F: Documentation/devicetree/bindings/net/qca,ar803x.yaml
F: Documentation/networking/phy.rst
+F: drivers/net/mdio/
F: drivers/net/pcs/
F: drivers/net/phy/
F: drivers/of/of_mdio.c
F: drivers/of/of_net.c
F: include/dt-bindings/net/qca-ar803x.h
F: include/linux/*mdio*.h
+F: include/linux/mdio/*.h
F: include/linux/of_net.h
F: include/linux/phy.h
F: include/linux/phy_fixed.h
@@ -10498,7 +10500,7 @@ M: Tobias Waldekranz <tobias@waldekranz.com>
L: netdev@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/net/marvell,mvusb.yaml
-F: drivers/net/phy/mdio-mvusb.c
+F: drivers/net/mdio/mdio-mvusb.c
MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER
M: Hu Ziji <huziji@marvell.com>
@@ -473,6 +473,8 @@ config NET_SB1000
source "drivers/net/phy/Kconfig"
+source "drivers/net/mdio/Kconfig"
+
source "drivers/net/pcs/Kconfig"
source "drivers/net/plip/Kconfig"
@@ -21,6 +21,7 @@ obj-$(CONFIG_MDIO) += mdio.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_NETCONSOLE) += netconsole.o
obj-y += phy/
+obj-y += mdio/
obj-y += pcs/
obj-$(CONFIG_RIONET) += rionet.o
obj-$(CONFIG_NET_TEAM) += team/
new file mode 100644
@@ -0,0 +1,241 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# MDIO Layer Configuration
+#
+
+menuconfig MDIO_DEVICE
+ tristate "MDIO bus device drivers"
+ help
+ MDIO devices and driver infrastructure code.
+
+if MDIO_DEVICE
+
+config MDIO_BUS
+ tristate
+ default m if PHYLIB=m
+ default MDIO_DEVICE
+ help
+ This internal symbol is used for link time dependencies and it
+ reflects whether the mdio_bus/mdio_device code is built as a
+ loadable module or built-in.
+
+if MDIO_BUS
+
+config MDIO_DEVRES
+ tristate
+
+config MDIO_SUN4I
+ tristate "Allwinner sun4i MDIO interface support"
+ depends on ARCH_SUNXI || COMPILE_TEST
+ help
+ This driver supports the MDIO interface found in the network
+ interface units of the Allwinner SoC that have an EMAC (A10,
+ A12, A10s, etc.)
+
+config MDIO_XGENE
+ tristate "APM X-Gene SoC MDIO bus controller"
+ depends on ARCH_XGENE || COMPILE_TEST
+ help
+ This module provides a driver for the MDIO busses found in the
+ APM X-Gene SoC's.
+
+config MDIO_ASPEED
+ tristate "ASPEED MDIO bus controller"
+ depends on ARCH_ASPEED || COMPILE_TEST
+ depends on OF_MDIO && HAS_IOMEM
+ help
+ This module provides a driver for the independent MDIO bus
+ controllers found in the ASPEED AST2600 SoC. This is a driver for the
+ third revision of the ASPEED MDIO register interface - the first two
+ revisions are the "old" and "new" interfaces found in the AST2400 and
+ AST2500, embedded in the MAC. For legacy reasons, FTGMAC100 driver
+ continues to drive the embedded MDIO controller for the AST2400 and
+ AST2500 SoCs, so say N if AST2600 support is not required.
+
+config MDIO_BITBANG
+ tristate "Bitbanged MDIO buses"
+ help
+ This module implements the MDIO bus protocol in software,
+ for use by low level drivers that export the ability to
+ drive the relevant pins.
+
+ If in doubt, say N.
+
+config MDIO_BCM_IPROC
+ tristate "Broadcom iProc MDIO bus controller"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on HAS_IOMEM && OF_MDIO
+ default ARCH_BCM_IPROC
+ help
+ This module provides a driver for the MDIO busses found in the
+ Broadcom iProc SoC's.
+
+config MDIO_BCM_UNIMAC
+ tristate "Broadcom UniMAC MDIO bus controller"
+ depends on HAS_IOMEM
+ help
+ This module provides a driver for the Broadcom UniMAC MDIO busses.
+ This hardware can be found in the Broadcom GENET Ethernet MAC
+ controllers as well as some Broadcom Ethernet switches such as the
+ Starfighter 2 switches.
+
+config MDIO_CAVIUM
+ tristate
+
+config MDIO_GPIO
+ tristate "GPIO lib-based bitbanged MDIO buses"
+ depends on MDIO_BITBANG
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Supports GPIO lib-based MDIO busses.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mdio-gpio.
+
+config MDIO_HISI_FEMAC
+ tristate "Hisilicon FEMAC MDIO bus controller"
+ depends on HAS_IOMEM && OF_MDIO
+ help
+ This module provides a driver for the MDIO busses found in the
+ Hisilicon SoC that have an Fast Ethernet MAC.
+
+config MDIO_I2C
+ tristate
+ depends on I2C
+ help
+ Support I2C based PHYs. This provides a MDIO bus bridged
+ to I2C to allow PHYs connected in I2C mode to be accessed
+ using the existing infrastructure.
+
+ This is library mode.
+
+config MDIO_MVUSB
+ tristate "Marvell USB to MDIO Adapter"
+ depends on USB
+ select MDIO_DEVRES
+ help
+ A USB to MDIO converter present on development boards for
+ Marvell's Link Street family of Ethernet switches.
+
+config MDIO_MSCC_MIIM
+ tristate "Microsemi MIIM interface support"
+ depends on HAS_IOMEM
+ select MDIO_DEVRES
+ help
+ This driver supports the MIIM (MDIO) interface found in the network
+ switches of the Microsemi SoCs; it is recommended to switch on
+ CONFIG_HIGH_RES_TIMERS
+
+config MDIO_MOXART
+ tristate "MOXA ART MDIO interface support"
+ depends on ARCH_MOXART || COMPILE_TEST
+ help
+ This driver supports the MDIO interface found in the network
+ interface units of the MOXA ART SoC
+
+config MDIO_OCTEON
+ tristate "Octeon and some ThunderX SOCs MDIO buses"
+ depends on (64BIT && OF_MDIO) || COMPILE_TEST
+ depends on HAS_IOMEM
+ select MDIO_CAVIUM
+ help
+ This module provides a driver for the Octeon and ThunderX MDIO
+ buses. It is required by the Octeon and ThunderX ethernet device
+ drivers on some systems.
+
+config MDIO_IPQ4019
+ tristate "Qualcomm IPQ4019 MDIO interface support"
+ depends on HAS_IOMEM && OF_MDIO
+ help
+ This driver supports the MDIO interface found in Qualcomm
+ IPQ40xx series Soc-s.
+
+config MDIO_IPQ8064
+ tristate "Qualcomm IPQ8064 MDIO interface support"
+ depends on HAS_IOMEM && OF_MDIO
+ depends on MFD_SYSCON
+ help
+ This driver supports the MDIO interface found in the network
+ interface units of the IPQ8064 SoC
+
+config MDIO_THUNDER
+ tristate "ThunderX SOCs MDIO buses"
+ depends on 64BIT
+ depends on PCI
+ select MDIO_CAVIUM
+ help
+ This driver supports the MDIO interfaces found on Cavium
+ ThunderX SoCs when the MDIO bus device appears as a PCI
+ device.
+
+comment "MDIO Multiplexers"
+
+config MDIO_BUS_MUX
+ tristate
+ depends on OF_MDIO
+ help
+ This module provides a driver framework for MDIO bus
+ multiplexers which connect one of several child MDIO busses
+ to a parent bus. Switching between child busses is done by
+ device specific drivers.
+
+config MDIO_BUS_MUX_MESON_G12A
+ tristate "Amlogic G12a based MDIO bus multiplexer"
+ depends on ARCH_MESON || COMPILE_TEST
+ depends on OF_MDIO && HAS_IOMEM && COMMON_CLK
+ select MDIO_BUS_MUX
+ default m if ARCH_MESON
+ help
+ This module provides a driver for the MDIO multiplexer/glue of
+ the amlogic g12a SoC. The multiplexers connects either the external
+ or the internal MDIO bus to the parent bus.
+
+config MDIO_BUS_MUX_BCM_IPROC
+ tristate "Broadcom iProc based MDIO bus multiplexers"
+ depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
+ select MDIO_BUS_MUX
+ default ARCH_BCM_IPROC
+ help
+ This module provides a driver for MDIO bus multiplexers found in
+ iProc based Broadcom SoCs. This multiplexer connects one of several
+ child MDIO bus to a parent bus. Buses could be internal as well as
+ external and selection logic lies inside the same multiplexer.
+
+config MDIO_BUS_MUX_GPIO
+ tristate "GPIO controlled MDIO bus multiplexers"
+ depends on OF_GPIO && OF_MDIO
+ select MDIO_BUS_MUX
+ help
+ This module provides a driver for MDIO bus multiplexers that
+ are controlled via GPIO lines. The multiplexer connects one of
+ several child MDIO busses to a parent bus. Child bus
+ selection is under the control of GPIO lines.
+
+config MDIO_BUS_MUX_MULTIPLEXER
+ tristate "MDIO bus multiplexer using kernel multiplexer subsystem"
+ depends on OF_MDIO
+ select MULTIPLEXER
+ select MDIO_BUS_MUX
+ help
+ This module provides a driver for MDIO bus multiplexer
+ that is controlled via the kernel multiplexer subsystem. The
+ bus multiplexer connects one of several child MDIO busses to
+ a parent bus. Child bus selection is under the control of
+ the kernel multiplexer subsystem.
+
+config MDIO_BUS_MUX_MMIOREG
+ tristate "MMIO device-controlled MDIO bus multiplexers"
+ depends on OF_MDIO && HAS_IOMEM
+ select MDIO_BUS_MUX
+ help
+ This module provides a driver for MDIO bus multiplexers that
+ are controlled via a simple memory-mapped device, like an FPGA.
+ The multiplexer connects one of several child MDIO busses to a
+ parent bus. Child bus selection is under the control of one of
+ the FPGA's registers.
+
+ Currently, only 8/16/32 bits registers are supported.
+
+
+endif
+endif
new file mode 100644
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for Linux MDIO bus drivers
+
+obj-$(CONFIG_MDIO_ASPEED) += mdio-aspeed.o
+obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
+obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
+obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
+obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
+obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
+obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o
+obj-$(CONFIG_MDIO_IPQ4019) += mdio-ipq4019.o
+obj-$(CONFIG_MDIO_IPQ8064) += mdio-ipq8064.o
+obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
+obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o
+obj-$(CONFIG_MDIO_MVUSB) += mdio-mvusb.o
+obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
+obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
+obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
+obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
+
+obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
+obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o
+obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
+obj-$(CONFIG_MDIO_BUS_MUX_MESON_G12A) += mdio-mux-meson-g12a.o
+obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
+obj-$(CONFIG_MDIO_BUS_MUX_MULTIPLEXER) += mdio-mux-multiplexer.o
similarity index 100%
rename from drivers/net/phy/mdio-aspeed.c
rename to drivers/net/mdio/mdio-aspeed.c
similarity index 100%
rename from drivers/net/phy/mdio-bcm-iproc.c
rename to drivers/net/mdio/mdio-bcm-iproc.c
similarity index 100%
rename from drivers/net/phy/mdio-bcm-unimac.c
rename to drivers/net/mdio/mdio-bcm-unimac.c
similarity index 100%
rename from drivers/net/phy/mdio-bitbang.c
rename to drivers/net/mdio/mdio-bitbang.c
similarity index 100%
rename from drivers/net/phy/mdio-cavium.c
rename to drivers/net/mdio/mdio-cavium.c
similarity index 100%
rename from drivers/net/phy/mdio-cavium.h
rename to drivers/net/mdio/mdio-cavium.h
similarity index 100%
rename from drivers/net/phy/mdio-gpio.c
rename to drivers/net/mdio/mdio-gpio.c
similarity index 100%
rename from drivers/net/phy/mdio-hisi-femac.c
rename to drivers/net/mdio/mdio-hisi-femac.c
similarity index 100%
rename from drivers/net/phy/mdio-i2c.c
rename to drivers/net/mdio/mdio-i2c.c
similarity index 100%
rename from drivers/net/phy/mdio-ipq4019.c
rename to drivers/net/mdio/mdio-ipq4019.c
similarity index 100%
rename from drivers/net/phy/mdio-ipq8064.c
rename to drivers/net/mdio/mdio-ipq8064.c
similarity index 100%
rename from drivers/net/phy/mdio-moxart.c
rename to drivers/net/mdio/mdio-moxart.c
similarity index 100%
rename from drivers/net/phy/mdio-mscc-miim.c
rename to drivers/net/mdio/mdio-mscc-miim.c
similarity index 100%
rename from drivers/net/phy/mdio-mux-bcm-iproc.c
rename to drivers/net/mdio/mdio-mux-bcm-iproc.c
similarity index 100%
rename from drivers/net/phy/mdio-mux-gpio.c
rename to drivers/net/mdio/mdio-mux-gpio.c
similarity index 100%
rename from drivers/net/phy/mdio-mux-meson-g12a.c
rename to drivers/net/mdio/mdio-mux-meson-g12a.c
similarity index 100%
rename from drivers/net/phy/mdio-mux-mmioreg.c
rename to drivers/net/mdio/mdio-mux-mmioreg.c
similarity index 100%
rename from drivers/net/phy/mdio-mux-multiplexer.c
rename to drivers/net/mdio/mdio-mux-multiplexer.c
similarity index 100%
rename from drivers/net/phy/mdio-mux.c
rename to drivers/net/mdio/mdio-mux.c
similarity index 100%
rename from drivers/net/phy/mdio-mvusb.c
rename to drivers/net/mdio/mdio-mvusb.c
similarity index 100%
rename from drivers/net/phy/mdio-octeon.c
rename to drivers/net/mdio/mdio-octeon.c
similarity index 100%
rename from drivers/net/phy/mdio-sun4i.c
rename to drivers/net/mdio/mdio-sun4i.c
similarity index 100%
rename from drivers/net/phy/mdio-thunder.c
rename to drivers/net/mdio/mdio-thunder.c
similarity index 100%
rename from drivers/net/phy/mdio-xgene.c
rename to drivers/net/mdio/mdio-xgene.c
@@ -3,240 +3,6 @@
# PHY Layer Configuration
#
-menuconfig MDIO_DEVICE
- tristate "MDIO bus device drivers"
- help
- MDIO devices and driver infrastructure code.
-
-if MDIO_DEVICE
-
-config MDIO_BUS
- tristate
- default m if PHYLIB=m
- default MDIO_DEVICE
- help
- This internal symbol is used for link time dependencies and it
- reflects whether the mdio_bus/mdio_device code is built as a
- loadable module or built-in.
-
-if MDIO_BUS
-
-config MDIO_DEVRES
- tristate
-
-config MDIO_ASPEED
- tristate "ASPEED MDIO bus controller"
- depends on ARCH_ASPEED || COMPILE_TEST
- depends on OF_MDIO && HAS_IOMEM
- help
- This module provides a driver for the independent MDIO bus
- controllers found in the ASPEED AST2600 SoC. This is a driver for the
- third revision of the ASPEED MDIO register interface - the first two
- revisions are the "old" and "new" interfaces found in the AST2400 and
- AST2500, embedded in the MAC. For legacy reasons, FTGMAC100 driver
- continues to drive the embedded MDIO controller for the AST2400 and
- AST2500 SoCs, so say N if AST2600 support is not required.
-
-config MDIO_BCM_IPROC
- tristate "Broadcom iProc MDIO bus controller"
- depends on ARCH_BCM_IPROC || COMPILE_TEST
- depends on HAS_IOMEM && OF_MDIO
- default ARCH_BCM_IPROC
- help
- This module provides a driver for the MDIO busses found in the
- Broadcom iProc SoC's.
-
-config MDIO_BCM_UNIMAC
- tristate "Broadcom UniMAC MDIO bus controller"
- depends on HAS_IOMEM
- help
- This module provides a driver for the Broadcom UniMAC MDIO busses.
- This hardware can be found in the Broadcom GENET Ethernet MAC
- controllers as well as some Broadcom Ethernet switches such as the
- Starfighter 2 switches.
-
-config MDIO_BITBANG
- tristate "Bitbanged MDIO buses"
- help
- This module implements the MDIO bus protocol in software,
- for use by low level drivers that export the ability to
- drive the relevant pins.
-
- If in doubt, say N.
-
-config MDIO_BUS_MUX
- tristate
- depends on OF_MDIO
- help
- This module provides a driver framework for MDIO bus
- multiplexers which connect one of several child MDIO busses
- to a parent bus. Switching between child busses is done by
- device specific drivers.
-
-config MDIO_BUS_MUX_BCM_IPROC
- tristate "Broadcom iProc based MDIO bus multiplexers"
- depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
- select MDIO_BUS_MUX
- default ARCH_BCM_IPROC
- help
- This module provides a driver for MDIO bus multiplexers found in
- iProc based Broadcom SoCs. This multiplexer connects one of several
- child MDIO bus to a parent bus. Buses could be internal as well as
- external and selection logic lies inside the same multiplexer.
-
-config MDIO_BUS_MUX_GPIO
- tristate "GPIO controlled MDIO bus multiplexers"
- depends on OF_GPIO && OF_MDIO
- select MDIO_BUS_MUX
- help
- This module provides a driver for MDIO bus multiplexers that
- are controlled via GPIO lines. The multiplexer connects one of
- several child MDIO busses to a parent bus. Child bus
- selection is under the control of GPIO lines.
-
-config MDIO_BUS_MUX_MESON_G12A
- tristate "Amlogic G12a based MDIO bus multiplexer"
- depends on ARCH_MESON || COMPILE_TEST
- depends on OF_MDIO && HAS_IOMEM && COMMON_CLK
- select MDIO_BUS_MUX
- default m if ARCH_MESON
- help
- This module provides a driver for the MDIO multiplexer/glue of
- the amlogic g12a SoC. The multiplexers connects either the external
- or the internal MDIO bus to the parent bus.
-
-config MDIO_BUS_MUX_MMIOREG
- tristate "MMIO device-controlled MDIO bus multiplexers"
- depends on OF_MDIO && HAS_IOMEM
- select MDIO_BUS_MUX
- help
- This module provides a driver for MDIO bus multiplexers that
- are controlled via a simple memory-mapped device, like an FPGA.
- The multiplexer connects one of several child MDIO busses to a
- parent bus. Child bus selection is under the control of one of
- the FPGA's registers.
-
- Currently, only 8/16/32 bits registers are supported.
-
-config MDIO_BUS_MUX_MULTIPLEXER
- tristate "MDIO bus multiplexer using kernel multiplexer subsystem"
- depends on OF_MDIO
- select MULTIPLEXER
- select MDIO_BUS_MUX
- help
- This module provides a driver for MDIO bus multiplexer
- that is controlled via the kernel multiplexer subsystem. The
- bus multiplexer connects one of several child MDIO busses to
- a parent bus. Child bus selection is under the control of
- the kernel multiplexer subsystem.
-
-config MDIO_CAVIUM
- tristate
-
-config MDIO_GPIO
- tristate "GPIO lib-based bitbanged MDIO buses"
- depends on MDIO_BITBANG
- depends on GPIOLIB || COMPILE_TEST
- help
- Supports GPIO lib-based MDIO busses.
-
- To compile this driver as a module, choose M here: the module
- will be called mdio-gpio.
-
-config MDIO_HISI_FEMAC
- tristate "Hisilicon FEMAC MDIO bus controller"
- depends on HAS_IOMEM && OF_MDIO
- help
- This module provides a driver for the MDIO busses found in the
- Hisilicon SoC that have an Fast Ethernet MAC.
-
-config MDIO_I2C
- tristate
- depends on I2C
- help
- Support I2C based PHYs. This provides a MDIO bus bridged
- to I2C to allow PHYs connected in I2C mode to be accessed
- using the existing infrastructure.
-
- This is library mode.
-
-config MDIO_IPQ4019
- tristate "Qualcomm IPQ4019 MDIO interface support"
- depends on HAS_IOMEM && OF_MDIO
- help
- This driver supports the MDIO interface found in Qualcomm
- IPQ40xx series Soc-s.
-
-config MDIO_IPQ8064
- tristate "Qualcomm IPQ8064 MDIO interface support"
- depends on HAS_IOMEM && OF_MDIO
- depends on MFD_SYSCON
- help
- This driver supports the MDIO interface found in the network
- interface units of the IPQ8064 SoC
-
-config MDIO_MOXART
- tristate "MOXA ART MDIO interface support"
- depends on ARCH_MOXART || COMPILE_TEST
- help
- This driver supports the MDIO interface found in the network
- interface units of the MOXA ART SoC
-
-config MDIO_MSCC_MIIM
- tristate "Microsemi MIIM interface support"
- depends on HAS_IOMEM
- select MDIO_DEVRES
- help
- This driver supports the MIIM (MDIO) interface found in the network
- switches of the Microsemi SoCs; it is recommended to switch on
- CONFIG_HIGH_RES_TIMERS
-
-config MDIO_MVUSB
- tristate "Marvell USB to MDIO Adapter"
- depends on USB
- select MDIO_DEVRES
- help
- A USB to MDIO converter present on development boards for
- Marvell's Link Street family of Ethernet switches.
-
-config MDIO_OCTEON
- tristate "Octeon and some ThunderX SOCs MDIO buses"
- depends on (64BIT && OF_MDIO) || COMPILE_TEST
- depends on HAS_IOMEM
- select MDIO_CAVIUM
- help
- This module provides a driver for the Octeon and ThunderX MDIO
- buses. It is required by the Octeon and ThunderX ethernet device
- drivers on some systems.
-
-config MDIO_SUN4I
- tristate "Allwinner sun4i MDIO interface support"
- depends on ARCH_SUNXI || COMPILE_TEST
- help
- This driver supports the MDIO interface found in the network
- interface units of the Allwinner SoC that have an EMAC (A10,
- A12, A10s, etc.)
-
-config MDIO_THUNDER
- tristate "ThunderX SOCs MDIO buses"
- depends on 64BIT
- depends on PCI
- select MDIO_CAVIUM
- help
- This driver supports the MDIO interfaces found on Cavium
- ThunderX SoCs when the MDIO bus device appears as a PCI
- device.
-
-config MDIO_XGENE
- tristate "APM X-Gene SoC MDIO bus controller"
- depends on ARCH_XGENE || COMPILE_TEST
- help
- This module provides a driver for the MDIO busses found in the
- APM X-Gene SoC's.
-
-endif
-endif
-
config PHYLINK
tristate
depends on NETDEVICES
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-# Makefile for Linux PHY drivers and MDIO bus drivers
+# Makefile for Linux PHY drivers
libphy-y := phy.o phy-c45.o phy-core.o phy_device.o \
linkmode.o
@@ -24,30 +24,6 @@ libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_led_triggers.o
obj-$(CONFIG_PHYLINK) += phylink.o
obj-$(CONFIG_PHYLIB) += libphy.o
-obj-$(CONFIG_MDIO_ASPEED) += mdio-aspeed.o
-obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
-obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
-obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
-obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
-obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o
-obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
-obj-$(CONFIG_MDIO_BUS_MUX_MESON_G12A) += mdio-mux-meson-g12a.o
-obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
-obj-$(CONFIG_MDIO_BUS_MUX_MULTIPLEXER) += mdio-mux-multiplexer.o
-obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
-obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
-obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
-obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o
-obj-$(CONFIG_MDIO_IPQ4019) += mdio-ipq4019.o
-obj-$(CONFIG_MDIO_IPQ8064) += mdio-ipq8064.o
-obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
-obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o
-obj-$(CONFIG_MDIO_MVUSB) += mdio-mvusb.o
-obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
-obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
-obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
-obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
-
obj-$(CONFIG_NETWORK_PHY_TIMESTAMPING) += mii_timestamper.o
obj-$(CONFIG_SFP) += sfp.o