diff mbox series

[net-next,v8,5/5] net: phy: DP83822: Add setting the fixed internal delay

Message ID 20200618211011.28837-6-dmurphy@ti.com
State Superseded
Headers show
Series RGMII Internal delay common property | expand

Commit Message

Dan Murphy June 18, 2020, 9:10 p.m. UTC
The DP83822 can be configured to use the RGMII interface. There are
independent fixed 3.5ns clock shift (aka internal delay) for the TX and RX
paths. This allow either one to be set if the MII interface is RGMII and
the value is set in the firmware node.

Signed-off-by: Dan Murphy <dmurphy@ti.com>

---
 drivers/net/phy/dp83822.c | 78 ++++++++++++++++++++++++++++++++++-----
 1 file changed, 68 insertions(+), 10 deletions(-)

-- 
2.26.2

Comments

kernel test robot June 19, 2020, 3:27 a.m. UTC | #1
Hi Dan,

I love your patch! Perhaps something to improve:

[auto build test WARNING on net-next/master]

url:    https://github.com/0day-ci/linux/commits/Dan-Murphy/RGMII-Internal-delay-common-property/20200619-051238
base:   https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git cb8e59cc87201af93dfbb6c3dccc8fcad72a09c2
config: x86_64-allyesconfig (attached as .config)
compiler: clang version 11.0.0 (https://github.com/llvm/llvm-project 487ca07fcc75d52755c9fe2ee05bcb3b6eeeec44)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install x86_64 cross compiling tool for clang build
        # apt-get install binutils-x86-64-linux-gnu
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>, old ones prefixed by <<):

>> drivers/net/phy/dp83822.c:284:7: warning: variable 'rgmii_delay' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]

if (rx_int_delay <= 0)
^~~~~~~~~~~~~~~~~
drivers/net/phy/dp83822.c:296:7: note: uninitialized use occurs here
if (rgmii_delay) {
^~~~~~~~~~~
drivers/net/phy/dp83822.c:284:3: note: remove the 'if' if its condition is always false
if (rx_int_delay <= 0)
^~~~~~~~~~~~~~~~~~~~~~
drivers/net/phy/dp83822.c:276:17: note: initialize the variable 'rgmii_delay' to silence this warning
int rgmii_delay;
^
= 0
1 warning generated.

vim +284 drivers/net/phy/dp83822.c

   272	
   273	static int dp83822_config_init(struct phy_device *phydev)
   274	{
   275		struct device *dev = &phydev->mdio.dev;
   276		int rgmii_delay;
   277		s32 rx_int_delay;
   278		s32 tx_int_delay;
   279		int err = 0;
   280	
   281		if (phy_interface_is_rgmii(phydev)) {
   282			rx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
   283							      true);
 > 284			if (rx_int_delay <= 0)

   285				rx_int_delay = 0;
   286			else
   287				rgmii_delay = DP83822_RX_CLK_SHIFT;
   288	
   289			tx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
   290							      false);
   291			if (tx_int_delay <= 0)
   292				tx_int_delay = 0;
   293			else
   294				rgmii_delay |= DP83822_TX_CLK_SHIFT;
   295	
   296			if (rgmii_delay) {
   297				err = phy_set_bits_mmd(phydev, DP83822_DEVADDR,
   298						       MII_DP83822_RCSR, rgmii_delay);
   299				if (err)
   300					return err;
   301			}
   302		}
   303	
   304		return dp8382x_disable_wol(phydev);
   305	}
   306	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
diff mbox series

Patch

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 1dd19d0cb269..0fe91119d57f 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -26,7 +26,9 @@ 
 #define MII_DP83822_PHYSCR	0x11
 #define MII_DP83822_MISR1	0x12
 #define MII_DP83822_MISR2	0x13
+#define MII_DP83822_RCSR	0x17
 #define MII_DP83822_RESET_CTRL	0x1f
+#define MII_DP83822_GENCFG	0x465
 
 #define DP83822_HW_RESET	BIT(15)
 #define DP83822_SW_RESET	BIT(14)
@@ -77,6 +79,10 @@ 
 #define DP83822_WOL_INDICATION_SEL BIT(8)
 #define DP83822_WOL_CLR_INDICATION BIT(11)
 
+/* RSCR bits */
+#define DP83822_RX_CLK_SHIFT	BIT(12)
+#define DP83822_TX_CLK_SHIFT	BIT(11)
+
 static int dp83822_ack_interrupt(struct phy_device *phydev)
 {
 	int err;
@@ -255,7 +261,7 @@  static int dp83822_config_intr(struct phy_device *phydev)
 	return phy_write(phydev, MII_DP83822_PHYSCR, physcr_status);
 }
 
-static int dp83822_config_init(struct phy_device *phydev)
+static int dp8382x_disable_wol(struct phy_device *phydev)
 {
 	int value = DP83822_WOL_EN | DP83822_WOL_MAGIC_EN |
 		    DP83822_WOL_SECURE_ON;
@@ -264,6 +270,45 @@  static int dp83822_config_init(struct phy_device *phydev)
 				  MII_DP83822_WOL_CFG, value);
 }
 
+static int dp83822_config_init(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	int rgmii_delay;
+	s32 rx_int_delay;
+	s32 tx_int_delay;
+	int err = 0;
+
+	if (phy_interface_is_rgmii(phydev)) {
+		rx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
+						      true);
+		if (rx_int_delay <= 0)
+			rx_int_delay = 0;
+		else
+			rgmii_delay = DP83822_RX_CLK_SHIFT;
+
+		tx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
+						      false);
+		if (tx_int_delay <= 0)
+			tx_int_delay = 0;
+		else
+			rgmii_delay |= DP83822_TX_CLK_SHIFT;
+
+		if (rgmii_delay) {
+			err = phy_set_bits_mmd(phydev, DP83822_DEVADDR,
+					       MII_DP83822_RCSR, rgmii_delay);
+			if (err)
+				return err;
+		}
+	}
+
+	return dp8382x_disable_wol(phydev);
+}
+
+static int dp8382x_config_init(struct phy_device *phydev)
+{
+	return dp8382x_disable_wol(phydev);
+}
+
 static int dp83822_phy_reset(struct phy_device *phydev)
 {
 	int err;
@@ -272,9 +317,7 @@  static int dp83822_phy_reset(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	dp83822_config_init(phydev);
-
-	return 0;
+	return phydev->drv->config_init(phydev);
 }
 
 static int dp83822_suspend(struct phy_device *phydev)
@@ -318,14 +361,29 @@  static int dp83822_resume(struct phy_device *phydev)
 		.resume = dp83822_resume,			\
 	}
 
+#define DP8382X_PHY_DRIVER(_id, _name)				\
+	{							\
+		PHY_ID_MATCH_MODEL(_id),			\
+		.name		= (_name),			\
+		/* PHY_BASIC_FEATURES */			\
+		.soft_reset	= dp83822_phy_reset,		\
+		.config_init	= dp8382x_config_init,		\
+		.get_wol = dp83822_get_wol,			\
+		.set_wol = dp83822_set_wol,			\
+		.ack_interrupt = dp83822_ack_interrupt,		\
+		.config_intr = dp83822_config_intr,		\
+		.suspend = dp83822_suspend,			\
+		.resume = dp83822_resume,			\
+	}
+
 static struct phy_driver dp83822_driver[] = {
 	DP83822_PHY_DRIVER(DP83822_PHY_ID, "TI DP83822"),
-	DP83822_PHY_DRIVER(DP83825I_PHY_ID, "TI DP83825I"),
-	DP83822_PHY_DRIVER(DP83826C_PHY_ID, "TI DP83826C"),
-	DP83822_PHY_DRIVER(DP83826NC_PHY_ID, "TI DP83826NC"),
-	DP83822_PHY_DRIVER(DP83825S_PHY_ID, "TI DP83825S"),
-	DP83822_PHY_DRIVER(DP83825CM_PHY_ID, "TI DP83825M"),
-	DP83822_PHY_DRIVER(DP83825CS_PHY_ID, "TI DP83825CS"),
+	DP8382X_PHY_DRIVER(DP83825I_PHY_ID, "TI DP83825I"),
+	DP8382X_PHY_DRIVER(DP83826C_PHY_ID, "TI DP83826C"),
+	DP8382X_PHY_DRIVER(DP83826NC_PHY_ID, "TI DP83826NC"),
+	DP8382X_PHY_DRIVER(DP83825S_PHY_ID, "TI DP83825S"),
+	DP8382X_PHY_DRIVER(DP83825CM_PHY_ID, "TI DP83825M"),
+	DP8382X_PHY_DRIVER(DP83825CS_PHY_ID, "TI DP83825CS"),
 };
 module_phy_driver(dp83822_driver);