diff mbox series

[net-next,1/4] net: phy: mscc: rename enum rgmii_rx_clock_delay to rgmii_clock_delay

Message ID 20200319211649.10136-2-olteanv@gmail.com
State New
Headers show
Series [net-next,1/4] net: phy: mscc: rename enum rgmii_rx_clock_delay to rgmii_clock_delay | expand

Commit Message

Vladimir Oltean March 19, 2020, 9:16 p.m. UTC 
From: Vladimir Oltean <vladimir.oltean@nxp.com>

There is nothing RX-specific about these clock skew values. So remove
"RX" from the name in preparation for the next patch where TX delays are
also going to be configured.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/phy/mscc/mscc.h      | 18 +++++++++---------
 drivers/net/phy/mscc/mscc_main.c |  2 +-
 2 files changed, 10 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/mscc/mscc.h b/drivers/net/phy/mscc/mscc.h
index 29ccb2c9c095..56feb14838f3 100644
--- a/drivers/net/phy/mscc/mscc.h
+++ b/drivers/net/phy/mscc/mscc.h
@@ -12,15 +12,15 @@ 
 #include "mscc_macsec.h"
 #endif
 
-enum rgmii_rx_clock_delay {
-	RGMII_RX_CLK_DELAY_0_2_NS = 0,
-	RGMII_RX_CLK_DELAY_0_8_NS = 1,
-	RGMII_RX_CLK_DELAY_1_1_NS = 2,
-	RGMII_RX_CLK_DELAY_1_7_NS = 3,
-	RGMII_RX_CLK_DELAY_2_0_NS = 4,
-	RGMII_RX_CLK_DELAY_2_3_NS = 5,
-	RGMII_RX_CLK_DELAY_2_6_NS = 6,
-	RGMII_RX_CLK_DELAY_3_4_NS = 7
+enum rgmii_clock_delay {
+	RGMII_CLK_DELAY_0_2_NS = 0,
+	RGMII_CLK_DELAY_0_8_NS = 1,
+	RGMII_CLK_DELAY_1_1_NS = 2,
+	RGMII_CLK_DELAY_1_7_NS = 3,
+	RGMII_CLK_DELAY_2_0_NS = 4,
+	RGMII_CLK_DELAY_2_3_NS = 5,
+	RGMII_CLK_DELAY_2_6_NS = 6,
+	RGMII_CLK_DELAY_3_4_NS = 7
 };
 
 /* Microsemi VSC85xx PHY registers */
diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index 2f6229a70ec1..d221583ed97a 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -525,7 +525,7 @@  static int vsc85xx_default_config(struct phy_device *phydev)
 	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
 	mutex_lock(&phydev->lock);
 
-	reg_val = RGMII_RX_CLK_DELAY_1_1_NS << RGMII_RX_CLK_DELAY_POS;
+	reg_val = RGMII_CLK_DELAY_1_1_NS << RGMII_RX_CLK_DELAY_POS;
 
 	rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED_2,
 			      MSCC_PHY_RGMII_CNTL, RGMII_RX_CLK_DELAY_MASK,