From patchwork Sat Jun 30 11:17:31 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 140673 Delivered-To: patch@linaro.org Received: by 2002:a2e:9754:0:0:0:0:0 with SMTP id f20-v6csp1895140ljj; Sat, 30 Jun 2018 04:23:28 -0700 (PDT) X-Google-Smtp-Source: ADUXVKKPcjbq9unzC7bwgFYwDdSmz1jWCEfFFu14gNhJDCXFbf4F+Ylcp8nIOoIf2VuUhTmpAUSH X-Received: by 2002:a17:902:42a3:: with SMTP id h32-v6mr18373193pld.72.1530357808638; Sat, 30 Jun 2018 04:23:28 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1530357808; cv=none; d=google.com; s=arc-20160816; b=Ymu5nL0AhCivqnasYvyHWl57RsuLJHbhb+lA4E6UhoySYFbGtlMuz1BWst/7zYYlD3 k+kXVY49Oj7aXvimsZdyIbAtWX0ITHn7b0i0u6zuW0QKfZCQS4vnc+USKz6XtvIuhF6S zt8eTzxq+H1cfztxg+L0x8q4LIG0L49m1c66uNWH2yQ8TQJptqvqSev89Qt7Y+Yt3Ygm ezEXh4hzYizpTXGlnvUMXeJJNo8rPhHFOnnGVJINDEd0z1/2Lp4EnX98CrFCYQJIhyTz /cy5ygjAYROrMG9OKeJcAmh9WtnHX8ZKkbLcOjfBf6wbebnn4gtirfiV9UKwZuA668pJ ++0A== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:message-id:date :subject:cc:to:from:dkim-signature:arc-authentication-results; bh=ZpweVBwrZa5Xv+WBQRKyGK7CIDnRzDNFamtcvfM3Wco=; b=0icLYN4+xZch3H1ludF9TAYz3EQ0sUuDIHcNSAt6Z90BHNbMh71h5RVRwT8graCiji JBkBwt/z7hRg4f3VF1THX/Z0eJFztGTe0YbEmynUPJRo8Rex4ts28n4+8du6RZVcd4Gz O2MhzoCmEN3al2cSrcs38NjyFY5y+krjHHhGSeRXFSYMgz76STbVCSmVFIq0uU9wiz2F bLeFqIIOTGjJNoRn2voxARJvhrYkWwcdYizgKYLxkpYKE3x4as7L2FrMJKClp/LuESZk GUXE0Rxz8PPGppLTpjXqHoX37z9ZlPKnq8vCCMClQ0faRxOItixNYqhc3Qj0RncWHqkQ AM7A== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=SkY1JADi; spf=pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=netdev-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id f90-v6si11971061pfe.291.2018.06.30.04.23.28; Sat, 30 Jun 2018 04:23:28 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=SkY1JADi; spf=pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=netdev-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030384AbeF3LXZ (ORCPT + 9 others); Sat, 30 Jun 2018 07:23:25 -0400 Received: from mail-lf0-f68.google.com ([209.85.215.68]:43988 "EHLO mail-lf0-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1030203AbeF3LXU (ORCPT ); Sat, 30 Jun 2018 07:23:20 -0400 Received: by mail-lf0-f68.google.com with SMTP id m12-v6so8037217lfc.10 for ; Sat, 30 Jun 2018 04:23:19 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=ZpweVBwrZa5Xv+WBQRKyGK7CIDnRzDNFamtcvfM3Wco=; b=SkY1JADiIoU8Hg301mt4uTGky/LXjF4fDFj2IPY/i30aggmWySRSjsGu91fThj465o FOD0vwOkqqkrFE8WDJ7KPXdZIMY06XgdHDxUDCF0q4OZ8Piu7K513hki+vJlBjJk9oCo wQv53D3GYB+0RK3kfX+4WXDIPl90V+KTNq01o= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=ZpweVBwrZa5Xv+WBQRKyGK7CIDnRzDNFamtcvfM3Wco=; b=cwrIIb0ty0pjEITWB9giQhDPXXav1BnNcdZtp/6zTV8SrHBLH/lO3dsrrqKU7DXGD+ Af5r5QLqz5d/bz4inbrgOleCEfD0YsevjOr+2dksMi7X9Qy7jLJl0nvHdw3SZGXVtmwi B47LFZQWq51fxQajTBe4KDJ08SagFV5oLBlB9ay3ZNblTauYZzerQbjuG51z82NHuZQ4 DyFzp6LOo2lBK6CHGEvJEk93eOz5YGH9ZuxXaiE4wkgPzAmpl5ex8MOu2LatNMNsHQG4 7opmGkk0cmbHsIeWskbEKRvqQ0E5kuvAv9/xNEFKJxqD3uuXnZoSc31ZajrO3aU/nmgm st3A== X-Gm-Message-State: APt69E0NFbUAdIDnXeW9CXnLtHUPlMy0rwm3GtJ9bntgAd3fLRR28b7b wxsxhtsI9JVlhoClhNFicg4d0A== X-Received: by 2002:a19:d405:: with SMTP id l5-v6mr11867711lfg.28.1530357798108; Sat, 30 Jun 2018 04:23:18 -0700 (PDT) Received: from localhost.localdomain (c-ae7b71d5.014-348-6c756e10.bbcust.telenor.se. [213.113.123.174]) by smtp.gmail.com with ESMTPSA id s80-v6sm2157188lfg.89.2018.06.30.04.23.16 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Sat, 30 Jun 2018 04:23:16 -0700 (PDT) From: Linus Walleij To: Andrew Lunn , Vivien Didelot , Florian Fainelli Cc: netdev@vger.kernel.org, openwrt-devel@lists.openwrt.org, LEDE Development List , Gabor Juhos , Linus Walleij Subject: [PATCH 3/3 v2] net: dsa: Add Vitesse VSC73xx DSA router driver Date: Sat, 30 Jun 2018 13:17:31 +0200 Message-Id: <20180630111731.19551-3-linus.walleij@linaro.org> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20180630111731.19551-1-linus.walleij@linaro.org> References: <20180630111731.19551-1-linus.walleij@linaro.org> Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org This adds a DSA driver for: Vitesse VSC7385 SparX-G5 5-port Integrated Gigabit Ethernet Switch Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch These switches have a built-in 8051 CPU and can download and execute firmware in this CPU. They can also be configured to use an external CPU handling the switch in a memory-mapped manner by connecting to that external CPU's memory bus. This driver (currently) only takes control of the switch chip over SPI and configures it to route packages around when connected to a CPU port. The chip has embedded PHYs and VLAN support so we model it using DSA as a best fit so we can easily add VLAN support and maybe later also exploit the internal frame header to get more direct control over the switch. The four built-in GPIO lines are exposed using a standard GPIO chip. Signed-off-by: Linus Walleij --- ChangeLog v1->v2: - Update .get_strings() and .get_sset_count() to match the signature with the new argument for sset type. - Drop DSA trailer select from Kconfig. - Use MII_* namespace definitions instead of hard-coded hex values and calls to read into the PHY: instead use the genphy decoded link state already present in the phydev. - Drop extraneous port number check in .enable() and .disable(), this should not happen. - Move the GPIO chip set-up into a separate function. - Add some missing static in front of a counter function. - Drop the bool flags in the state container, use some macros with the chipid to identify model instead like IS_VSC739X(). - Check phydev->interface() for configuring the CPU port into RGMII mode. --- drivers/net/dsa/Kconfig | 11 + drivers/net/dsa/Makefile | 1 + drivers/net/dsa/vitesse-vsc73xx.c | 1364 +++++++++++++++++++++++++++++ 3 files changed, 1376 insertions(+) create mode 100644 drivers/net/dsa/vitesse-vsc73xx.c -- 2.17.1 diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index 2b81b97e994f..733653d8359a 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -76,4 +76,15 @@ config NET_DSA_SMSC_LAN9303_MDIO Enable access functions if the SMSC/Microchip LAN9303 is configured for MDIO managed mode. +config NET_DSA_VITESSE_VSC73XX + tristate "Vitesse VSC7385/7388/7395/7398 support" + depends on OF && SPI + depends on NET_DSA + select FIXED_PHY + select VITESSE_PHY + select GPIOLIB + ---help--- + This enables support for the Vitesse VSC7385, VSC7388, + VSC7395 and VSC7398 SparX integrated ethernet switches. + endmenu diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index 15c2a831edf1..d4f873ae2f6a 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o +obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX) += vitesse-vsc73xx.o obj-y += b53/ obj-y += microchip/ obj-y += mv88e6xxx/ diff --git a/drivers/net/dsa/vitesse-vsc73xx.c b/drivers/net/dsa/vitesse-vsc73xx.c new file mode 100644 index 000000000000..a4fc260006de --- /dev/null +++ b/drivers/net/dsa/vitesse-vsc73xx.c @@ -0,0 +1,1364 @@ +// SPDX-License-Identifier: GPL-2.0 +/* DSA driver for: + * Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch + * Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch + * Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch + * Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch + * + * These switches have a built-in 8051 CPU and can download and execute a + * firmware in this CPU. They can also be configured to use an external CPU + * handling the switch in a memory-mapped manner by connecting to that external + * CPU's memory bus. + * + * This driver (currently) only takes control of the switch chip over SPI and + * configures it to route packages around when connected to a CPU port. The + * chip has embedded PHYs and VLAN support so we model it using DSA. + * + * Copyright (C) 2018 Linus Wallej + * Includes portions of code from the firmware uploader by: + * Copyright (C) 2009 Gabor Juhos + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define VSC73XX_BLOCK_MAC 0x1 /* Subblocks 0-4, 6 (CPU port) */ +#define VSC73XX_BLOCK_ANALYZER 0x2 /* Only subblock 0 */ +#define VSC73XX_BLOCK_MII 0x3 /* Subblocks 0 and 1 */ +#define VSC73XX_BLOCK_MEMINIT 0x3 /* Only subblock 2 */ +#define VSC73XX_BLOCK_CAPTURE 0x4 /* Only subblock 2 */ +#define VSC73XX_BLOCK_ARBITER 0x5 /* Only subblock 0 */ +#define VSC73XX_BLOCK_SYSTEM 0x7 /* Only subblock 0 */ + +#define CPU_PORT 6 /* CPU port */ + +/* MAC Block registers */ +#define VSC73XX_MAC_CFG 0x00 +#define VSC73XX_MACHDXGAP 0x02 +#define VSC73XX_FCCONF 0x04 +#define VSC73XX_FCMACHI 0x08 +#define VSC73XX_FCMACLO 0x0c +#define VSC73XX_MAXLEN 0x10 +#define VSC73XX_ADVPORTM 0x19 +#define VSC73XX_TXUPDCFG 0x24 +#define VSC73XX_TXQ_SELECT_CFG 0x28 +#define VSC73XX_RXOCT 0x50 +#define VSC73XX_TXOCT 0x51 +#define VSC73XX_C_RX0 0x52 +#define VSC73XX_C_RX1 0x53 +#define VSC73XX_C_RX2 0x54 +#define VSC73XX_C_TX0 0x55 +#define VSC73XX_C_TX1 0x56 +#define VSC73XX_C_TX2 0x57 +#define VSC73XX_C_CFG 0x58 +#define VSC73XX_CAT_DROP 0x6e +#define VSC73XX_CAT_PR_MISC_L2 0x6f +#define VSC73XX_CAT_PR_USR_PRIO 0x75 +#define VSC73XX_Q_MISC_CONF 0xdf + +/* MAC_CFG register bits */ +#define VSC73XX_MAC_CFG_WEXC_DIS BIT(31) +#define VSC73XX_MAC_CFG_PORT_RST BIT(29) +#define VSC73XX_MAC_CFG_TX_EN BIT(28) +#define VSC73XX_MAC_CFG_SEED_LOAD BIT(27) +#define VSC73XX_MAC_CFG_SEED_MASK GENMASK(26, 19) +#define VSC73XX_MAC_CFG_SEED_OFFSET 19 +#define VSC73XX_MAC_CFG_FDX BIT(18) +#define VSC73XX_MAC_CFG_GIGA_MODE BIT(17) +#define VSC73XX_MAC_CFG_RX_EN BIT(16) +#define VSC73XX_MAC_CFG_VLAN_DBLAWR BIT(15) +#define VSC73XX_MAC_CFG_VLAN_AWR BIT(14) +#define VSC73XX_MAC_CFG_100_BASE_T BIT(13) /* Not in manual */ +#define VSC73XX_MAC_CFG_TX_IPG_MASK GENMASK(10, 6) +#define VSC73XX_MAC_CFG_TX_IPG_OFFSET 6 +#define VSC73XX_MAC_CFG_TX_IPG_1000M (6 << VSC73XX_MAC_CFG_TX_IPG_OFFSET) +#define VSC73XX_MAC_CFG_TX_IPG_100_10M (17 << VSC73XX_MAC_CFG_TX_IPG_OFFSET) +#define VSC73XX_MAC_CFG_MAC_RX_RST BIT(5) +#define VSC73XX_MAC_CFG_MAC_TX_RST BIT(4) +#define VSC73XX_MAC_CFG_CLK_SEL_MASK GENMASK(2, 0) +#define VSC73XX_MAC_CFG_CLK_SEL_OFFSET 0 +#define VSC73XX_MAC_CFG_CLK_SEL_1000M 1 +#define VSC73XX_MAC_CFG_CLK_SEL_100M 2 +#define VSC73XX_MAC_CFG_CLK_SEL_10M 3 +#define VSC73XX_MAC_CFG_CLK_SEL_EXT 4 + +#define VSC73XX_MAC_CFG_1000M_F_PHY (VSC73XX_MAC_CFG_FDX | \ + VSC73XX_MAC_CFG_GIGA_MODE | \ + VSC73XX_MAC_CFG_TX_IPG_1000M | \ + VSC73XX_MAC_CFG_CLK_SEL_EXT) +#define VSC73XX_MAC_CFG_100_10M_F_PHY (VSC73XX_MAC_CFG_FDX | \ + VSC73XX_MAC_CFG_TX_IPG_100_10M | \ + VSC73XX_MAC_CFG_CLK_SEL_EXT) +#define VSC73XX_MAC_CFG_100_10M_H_PHY (VSC73XX_MAC_CFG_TX_IPG_100_10M | \ + VSC73XX_MAC_CFG_CLK_SEL_EXT) +#define VSC73XX_MAC_CFG_1000M_F_RGMII (VSC73XX_MAC_CFG_FDX | \ + VSC73XX_MAC_CFG_GIGA_MODE | \ + VSC73XX_MAC_CFG_TX_IPG_1000M | \ + VSC73XX_MAC_CFG_CLK_SEL_1000M) +#define VSC73XX_MAC_CFG_RESET (VSC73XX_MAC_CFG_PORT_RST | \ + VSC73XX_MAC_CFG_MAC_RX_RST | \ + VSC73XX_MAC_CFG_MAC_TX_RST) + +/* Flow control register bits */ +#define VSC73XX_FCCONF_ZERO_PAUSE_EN BIT(17) +#define VSC73XX_FCCONF_FLOW_CTRL_OBEY BIT(16) +#define VSC73XX_FCCONF_PAUSE_VAL_MASK GENMASK(15, 0) + +/* ADVPORTM advanced port setup register bits */ +#define VSC73XX_ADVPORTM_IFG_PPM BIT(7) +#define VSC73XX_ADVPORTM_EXC_COL_CONT BIT(6) +#define VSC73XX_ADVPORTM_EXT_PORT BIT(5) +#define VSC73XX_ADVPORTM_INV_GTX BIT(4) +#define VSC73XX_ADVPORTM_ENA_GTX BIT(3) +#define VSC73XX_ADVPORTM_DDR_MODE BIT(2) +#define VSC73XX_ADVPORTM_IO_LOOPBACK BIT(1) +#define VSC73XX_ADVPORTM_HOST_LOOPBACK BIT(0) + +/* CAT_DROP categorizer frame dropping register bits */ +#define VSC73XX_CAT_DROP_DROP_MC_SMAC_ENA BIT(6) +#define VSC73XX_CAT_DROP_FWD_CTRL_ENA BIT(4) +#define VSC73XX_CAT_DROP_FWD_PAUSE_ENA BIT(3) +#define VSC73XX_CAT_DROP_UNTAGGED_ENA BIT(2) +#define VSC73XX_CAT_DROP_TAGGED_ENA BIT(1) +#define VSC73XX_CAT_DROP_NULL_MAC_ENA BIT(0) + +#define VSC73XX_Q_MISC_CONF_EXTENT_MEM BIT(31) +#define VSC73XX_Q_MISC_CONF_EARLY_TX_MASK GENMASK(4, 1) +#define VSC73XX_Q_MISC_CONF_EARLY_TX_512 (1 << 1) +#define VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE BIT(0) + +/* Frame analyzer block 2 registers */ +#define VSC73XX_STORMLIMIT 0x02 +#define VSC73XX_ADVLEARN 0x03 +#define VSC73XX_IFLODMSK 0x04 +#define VSC73XX_VLANMASK 0x05 +#define VSC73XX_MACHDATA 0x06 +#define VSC73XX_MACLDATA 0x07 +#define VSC73XX_ANMOVED 0x08 +#define VSC73XX_ANAGEFIL 0x09 +#define VSC73XX_ANEVENTS 0x0a +#define VSC73XX_ANCNTMASK 0x0b +#define VSC73XX_ANCNTVAL 0x0c +#define VSC73XX_LEARNMASK 0x0d +#define VSC73XX_UFLODMASK 0x0e +#define VSC73XX_MFLODMASK 0x0f +#define VSC73XX_RECVMASK 0x10 +#define VSC73XX_AGGRCTRL 0x20 +#define VSC73XX_AGGRMSKS 0x30 /* Until 0x3f */ +#define VSC73XX_DSTMASKS 0x40 /* Until 0x7f */ +#define VSC73XX_SRCMASKS 0x80 /* Until 0x87 */ +#define VSC73XX_CAPENAB 0xa0 +#define VSC73XX_MACACCESS 0xb0 +#define VSC73XX_IPMCACCESS 0xb1 +#define VSC73XX_MACTINDX 0xc0 +#define VSC73XX_VLANACCESS 0xd0 +#define VSC73XX_VLANTIDX 0xe0 +#define VSC73XX_AGENCTRL 0xf0 +#define VSC73XX_CAPRST 0xff + +#define VSC73XX_MACACCESS_CPU_COPY BIT(14) +#define VSC73XX_MACACCESS_FWD_KILL BIT(13) +#define VSC73XX_MACACCESS_IGNORE_VLAN BIT(12) +#define VSC73XX_MACACCESS_AGED_FLAG BIT(11) +#define VSC73XX_MACACCESS_VALID BIT(10) +#define VSC73XX_MACACCESS_LOCKED BIT(9) +#define VSC73XX_MACACCESS_DEST_IDX_MASK GENMASK(8, 3) +#define VSC73XX_MACACCESS_CMD_MASK GENMASK(2, 0) +#define VSC73XX_MACACCESS_CMD_IDLE 0 +#define VSC73XX_MACACCESS_CMD_LEARN 1 +#define VSC73XX_MACACCESS_CMD_FORGET 2 +#define VSC73XX_MACACCESS_CMD_AGE_TABLE 3 +#define VSC73XX_MACACCESS_CMD_FLUSH_TABLE 4 +#define VSC73XX_MACACCESS_CMD_CLEAR_TABLE 5 +#define VSC73XX_MACACCESS_CMD_READ_ENTRY 6 +#define VSC73XX_MACACCESS_CMD_WRITE_ENTRY 7 + +#define VSC73XX_VLANACCESS_LEARN_DISABLED BIT(30) +#define VSC73XX_VLANACCESS_VLAN_MIRROR BIT(29) +#define VSC73XX_VLANACCESS_VLAN_SRC_CHECK BIT(28) +#define VSC73XX_VLANACCESS_VLAN_PORT_MASK GENMASK(9, 2) +#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK GENMASK(2, 0) +#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_IDLE 0 +#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_READ_ENTRY 1 +#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_WRITE_ENTRY 2 +#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE 3 + +/* MII block 3 registers */ +#define VSC73XX_MII_STAT 0x0 +#define VSC73XX_MII_CMD 0x1 +#define VSC73XX_MII_DATA 0x2 + +/* Arbiter block 5 registers */ +#define VSC73XX_ARBEMPTY 0x0c +#define VSC73XX_ARBDISC 0x0e +#define VSC73XX_SBACKWDROP 0x12 +#define VSC73XX_DBACKWDROP 0x13 +#define VSC73XX_ARBBURSTPROB 0x15 + +/* System block 7 registers */ +#define VSC73XX_ICPU_SIPAD 0x01 +#define VSC73XX_GMIIDELAY 0x05 +#define VSC73XX_ICPU_CTRL 0x10 +#define VSC73XX_ICPU_ADDR 0x11 +#define VSC73XX_ICPU_SRAM 0x12 +#define VSC73XX_HWSEM 0x13 +#define VSC73XX_GLORESET 0x14 +#define VSC73XX_ICPU_MBOX_VAL 0x15 +#define VSC73XX_ICPU_MBOX_SET 0x16 +#define VSC73XX_ICPU_MBOX_CLR 0x17 +#define VSC73XX_CHIPID 0x18 +#define VSC73XX_GPIO 0x34 + +#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_NONE 0 +#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_4_NS 1 +#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_7_NS 2 +#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS 3 + +#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_NONE (0 << 4) +#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_4_NS (1 << 4) +#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_7_NS (2 << 4) +#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS (3 << 4) + +#define VSC73XX_ICPU_CTRL_WATCHDOG_RST BIT(31) +#define VSC73XX_ICPU_CTRL_CLK_DIV_MASK GENMASK(12, 8) +#define VSC73XX_ICPU_CTRL_SRST_HOLD BIT(7) +#define VSC73XX_ICPU_CTRL_ICPU_PI_EN BIT(6) +#define VSC73XX_ICPU_CTRL_BOOT_EN BIT(3) +#define VSC73XX_ICPU_CTRL_EXT_ACC_EN BIT(2) +#define VSC73XX_ICPU_CTRL_CLK_EN BIT(1) +#define VSC73XX_ICPU_CTRL_SRST BIT(0) + +#define VSC73XX_CHIPID_ID_SHIFT 12 +#define VSC73XX_CHIPID_ID_MASK 0xffff +#define VSC73XX_CHIPID_REV_SHIFT 28 +#define VSC73XX_CHIPID_REV_MASK 0xf +#define VSC73XX_CHIPID_ID_7385 0x7385 +#define VSC73XX_CHIPID_ID_7388 0x7388 +#define VSC73XX_CHIPID_ID_7395 0x7395 +#define VSC73XX_CHIPID_ID_7398 0x7398 + +#define VSC73XX_GLORESET_STROBE BIT(4) +#define VSC73XX_GLORESET_ICPU_LOCK BIT(3) +#define VSC73XX_GLORESET_MEM_LOCK BIT(2) +#define VSC73XX_GLORESET_PHY_RESET BIT(1) +#define VSC73XX_GLORESET_MASTER_RESET BIT(0) + +#define VSC73XX_CMD_MODE_READ 0 +#define VSC73XX_CMD_MODE_WRITE 1 +#define VSC73XX_CMD_MODE_SHIFT 4 +#define VSC73XX_CMD_BLOCK_SHIFT 5 +#define VSC73XX_CMD_BLOCK_MASK 0x7 +#define VSC73XX_CMD_SUBBLOCK_MASK 0xf + +#define VSC7385_CLOCK_DELAY ((3 << 4) | 3) +#define VSC7385_CLOCK_DELAY_MASK ((3 << 4) | 3) + +#define VSC73XX_ICPU_CTRL_STOP (VSC73XX_ICPU_CTRL_SRST_HOLD | \ + VSC73XX_ICPU_CTRL_BOOT_EN | \ + VSC73XX_ICPU_CTRL_EXT_ACC_EN) + +#define VSC73XX_ICPU_CTRL_START (VSC73XX_ICPU_CTRL_CLK_DIV | \ + VSC73XX_ICPU_CTRL_BOOT_EN | \ + VSC73XX_ICPU_CTRL_CLK_EN | \ + VSC73XX_ICPU_CTRL_SRST) + +/** + * struct vsc73xx - VSC73xx state container + */ +struct vsc73xx { + struct device *dev; + struct gpio_desc *reset; + struct spi_device *spi; + struct dsa_switch *ds; + struct gpio_chip gc; + u16 chipid; + u8 addr[ETH_ALEN]; + struct mutex lock; /* Protects SPI traffic */ +}; + +#define IS_7385(a) ((a)->chipid == VSC73XX_CHIPID_ID_7385) +#define IS_7388(a) ((a)->chipid == VSC73XX_CHIPID_ID_7388) +#define IS_7395(a) ((a)->chipid == VSC73XX_CHIPID_ID_7395) +#define IS_7398(a) ((a)->chipid == VSC73XX_CHIPID_ID_7398) +#define IS_739X(a) (IS_7395(a) || IS_7398(a)) + +struct vsc73xx_counter { + u8 counter; + const char *name; +}; + +/* Counters are named according to the MIB standards where applicable. + * Some counters are custom, non-standard. The standard counters are + * named in accordance with RFC2819, RFC2021 and IEEE Std 802.3-2002 Annex + * 30A Counters. + */ +static const struct vsc73xx_counter vsc73xx_rx_counters[] = { + { 0, "RxEtherStatsPkts" }, + { 1, "RxBroadcast+MulticastPkts" }, /* non-standard counter */ + { 2, "RxTotalErrorPackets" }, /* non-standard counter */ + { 3, "RxEtherStatsBroadcastPkts" }, + { 4, "RxEtherStatsMulticastPkts" }, + { 5, "RxEtherStatsPkts64Octets" }, + { 6, "RxEtherStatsPkts65to127Octets" }, + { 7, "RxEtherStatsPkts128to255Octets" }, + { 8, "RxEtherStatsPkts256to511Octets" }, + { 9, "RxEtherStatsPkts512to1023Octets" }, + { 10, "RxEtherStatsPkts1024to1518Octets" }, + { 11, "RxJumboFrames" }, /* non-standard counter */ + { 12, "RxaPauseMACControlFramesTransmitted" }, + { 13, "RxFIFODrops" }, /* non-standard counter */ + { 14, "RxBackwardDrops" }, /* non-standard counter */ + { 15, "RxClassifierDrops" }, /* non-standard counter */ + { 16, "RxEtherStatsCRCAlignErrors" }, + { 17, "RxEtherStatsUndersizePkts" }, + { 18, "RxEtherStatsOversizePkts" }, + { 19, "RxEtherStatsFragments" }, + { 20, "RxEtherStatsJabbers" }, + { 21, "RxaMACControlFramesReceived" }, + /* 22-24 are undefined */ + { 25, "RxaFramesReceivedOK" }, + { 26, "RxQoSClass0" }, /* non-standard counter */ + { 27, "RxQoSClass1" }, /* non-standard counter */ + { 28, "RxQoSClass2" }, /* non-standard counter */ + { 29, "RxQoSClass3" }, /* non-standard counter */ +}; + +static const struct vsc73xx_counter vsc73xx_tx_counters[] = { + { 0, "TxEtherStatsPkts" }, + { 1, "TxBroadcast+MulticastPkts" }, /* non-standard counter */ + { 2, "TxTotalErrorPackets" }, /* non-standard counter */ + { 3, "TxEtherStatsBroadcastPkts" }, + { 4, "TxEtherStatsMulticastPkts" }, + { 5, "TxEtherStatsPkts64Octets" }, + { 6, "TxEtherStatsPkts65to127Octets" }, + { 7, "TxEtherStatsPkts128to255Octets" }, + { 8, "TxEtherStatsPkts256to511Octets" }, + { 9, "TxEtherStatsPkts512to1023Octets" }, + { 10, "TxEtherStatsPkts1024to1518Octets" }, + { 11, "TxJumboFrames" }, /* non-standard counter */ + { 12, "TxaPauseMACControlFramesTransmitted" }, + { 13, "TxFIFODrops" }, /* non-standard counter */ + { 14, "TxDrops" }, /* non-standard counter */ + { 15, "TxEtherStatsCollisions" }, + { 16, "TxEtherStatsCRCAlignErrors" }, + { 17, "TxEtherStatsUndersizePkts" }, + { 18, "TxEtherStatsOversizePkts" }, + { 19, "TxEtherStatsFragments" }, + { 20, "TxEtherStatsJabbers" }, + /* 21-24 are undefined */ + { 25, "TxaFramesReceivedOK" }, + { 26, "TxQoSClass0" }, /* non-standard counter */ + { 27, "TxQoSClass1" }, /* non-standard counter */ + { 28, "TxQoSClass2" }, /* non-standard counter */ + { 29, "TxQoSClass3" }, /* non-standard counter */ +}; + +static int vsc73xx_is_addr_valid(u8 block, u8 subblock) +{ + switch (block) { + case VSC73XX_BLOCK_MAC: + switch (subblock) { + case 0 ... 4: + case 6: + return 1; + } + break; + + case VSC73XX_BLOCK_ANALYZER: + case VSC73XX_BLOCK_SYSTEM: + switch (subblock) { + case 0: + return 1; + } + break; + + case VSC73XX_BLOCK_MII: + case VSC73XX_BLOCK_CAPTURE: + case VSC73XX_BLOCK_ARBITER: + switch (subblock) { + case 0 ... 1: + return 1; + } + break; + } + + return 0; +} + +static u8 vsc73xx_make_addr(u8 mode, u8 block, u8 subblock) +{ + u8 ret; + + ret = (block & VSC73XX_CMD_BLOCK_MASK) << VSC73XX_CMD_BLOCK_SHIFT; + ret |= (mode & 1) << VSC73XX_CMD_MODE_SHIFT; + ret |= subblock & VSC73XX_CMD_SUBBLOCK_MASK; + + return ret; +} + +static int vsc73xx_read(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg, + u32 *val) +{ + struct spi_transfer t[2]; + struct spi_message m; + u8 cmd[4]; + u8 buf[4]; + int ret; + + if (!vsc73xx_is_addr_valid(block, subblock)) + return -EINVAL; + + spi_message_init(&m); + + memset(&t, 0, sizeof(t)); + + t[0].tx_buf = cmd; + t[0].len = sizeof(cmd); + spi_message_add_tail(&t[0], &m); + + t[1].rx_buf = buf; + t[1].len = sizeof(buf); + spi_message_add_tail(&t[1], &m); + + cmd[0] = vsc73xx_make_addr(VSC73XX_CMD_MODE_READ, block, subblock); + cmd[1] = reg; + cmd[2] = 0; + cmd[3] = 0; + + mutex_lock(&vsc->lock); + ret = spi_sync(vsc->spi, &m); + mutex_unlock(&vsc->lock); + + if (ret) + return ret; + + *val = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3]; + + return 0; +} + +static int vsc73xx_write(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg, + u32 val) +{ + struct spi_transfer t[2]; + struct spi_message m; + u8 cmd[2]; + u8 buf[4]; + int ret; + + if (!vsc73xx_is_addr_valid(block, subblock)) + return -EINVAL; + + spi_message_init(&m); + + memset(&t, 0, sizeof(t)); + + t[0].tx_buf = cmd; + t[0].len = sizeof(cmd); + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = buf; + t[1].len = sizeof(buf); + spi_message_add_tail(&t[1], &m); + + cmd[0] = vsc73xx_make_addr(VSC73XX_CMD_MODE_WRITE, block, subblock); + cmd[1] = reg; + + buf[0] = (val >> 24) & 0xff; + buf[1] = (val >> 16) & 0xff; + buf[2] = (val >> 8) & 0xff; + buf[3] = val & 0xff; + + mutex_lock(&vsc->lock); + ret = spi_sync(vsc->spi, &m); + mutex_unlock(&vsc->lock); + + return ret; +} + +static int vsc73xx_update_bits(struct vsc73xx *vsc, u8 block, u8 subblock, + u8 reg, u32 mask, u32 val) +{ + u32 tmp, orig; + int ret; + + /* Same read-modify-write algorithm as e.g. regmap */ + ret = vsc73xx_read(vsc, block, subblock, reg, &orig); + if (ret) + return ret; + tmp = orig & ~mask; + tmp |= val & mask; + return vsc73xx_write(vsc, block, subblock, reg, tmp); +} + +static int vsc73xx_detect(struct vsc73xx *vsc) +{ + bool icpu_si_boot_en; + bool icpu_pi_en; + u32 val; + u32 rev; + int ret; + u32 id; + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_ICPU_MBOX_VAL, &val); + if (ret) { + dev_err(vsc->dev, "unable to read mailbox (%d)\n", ret); + return ret; + } + + if (val == 0xffffffff) { + dev_info(vsc->dev, "chip seems dead, assert reset\n"); + gpiod_set_value_cansleep(vsc->reset, 1); + /* Reset pulse should be 20ns minimum, according to datasheet + * table 245, so 10us should be fine + */ + usleep_range(10, 100); + gpiod_set_value_cansleep(vsc->reset, 0); + /* Wait 20ms according to datasheet table 245 */ + msleep(20); + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_ICPU_MBOX_VAL, &val); + if (val == 0xffffffff) { + dev_err(vsc->dev, "seems not to help, giving up\n"); + return -ENODEV; + } + } + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_CHIPID, &val); + if (ret) { + dev_err(vsc->dev, "unable to read chip id (%d)\n", ret); + return ret; + } + + id = (val >> VSC73XX_CHIPID_ID_SHIFT) & + VSC73XX_CHIPID_ID_MASK; + switch (id) { + case VSC73XX_CHIPID_ID_7385: + case VSC73XX_CHIPID_ID_7388: + case VSC73XX_CHIPID_ID_7395: + case VSC73XX_CHIPID_ID_7398: + break; + default: + dev_err(vsc->dev, "unsupported chip, id=%04x\n", id); + return -ENODEV; + } + + vsc->chipid = id; + rev = (val >> VSC73XX_CHIPID_REV_SHIFT) & + VSC73XX_CHIPID_REV_MASK; + dev_info(vsc->dev, "VSC%04X (rev: %d) switch found\n", id, rev); + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_ICPU_CTRL, &val); + if (ret) { + dev_err(vsc->dev, "unable to read iCPU control\n"); + return ret; + } + + /* The iCPU can always be used but can boot in different ways. + * If it is initially disabled and has no external memory, + * we are in control and can do whatever we like, else we + * are probably in trouble (we need some way to communicate + * with the running firmware) so we bail out for now. + */ + icpu_pi_en = !!(val & VSC73XX_ICPU_CTRL_ICPU_PI_EN); + icpu_si_boot_en = !!(val & VSC73XX_ICPU_CTRL_BOOT_EN); + if (icpu_si_boot_en && icpu_pi_en) { + dev_err(vsc->dev, + "iCPU enabled boots from SI, has external memory\n"); + dev_err(vsc->dev, "no idea how to deal with this\n"); + return -ENODEV; + } + if (icpu_si_boot_en && !icpu_pi_en) { + dev_err(vsc->dev, + "iCPU enabled boots from SI, no external memory\n"); + dev_err(vsc->dev, "no idea how to deal with this\n"); + return -ENODEV; + } + if (!icpu_si_boot_en && icpu_pi_en) { + dev_err(vsc->dev, + "iCPU enabled, boots from PI external memory\n"); + dev_err(vsc->dev, "no idea how to deal with this\n"); + return -ENODEV; + } + /* !icpu_si_boot_en && !cpu_pi_en */ + dev_info(vsc->dev, "iCPU disabled, no external memory\n"); + + return 0; +} + +static int vsc73xx_phy_read(struct dsa_switch *ds, int phy, int regnum) +{ + struct vsc73xx *vsc = ds->priv; + u32 cmd; + u32 val; + int ret; + + /* Setting bit 26 means "read" */ + cmd = BIT(26) | (phy << 21) | (regnum << 16); + ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd); + if (ret) + return ret; + msleep(2); + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MII, 0, 2, &val); + if (ret) + return ret; + if (val & BIT(16)) { + dev_err(vsc->dev, "reading reg %02x from phy%d failed\n", + regnum, phy); + return -EIO; + } + val &= 0xFFFFU; + + dev_dbg(vsc->dev, "read reg %02x from phy%d = %04x\n", + regnum, phy, val); + + return val; +} + +static int vsc73xx_phy_write(struct dsa_switch *ds, int phy, int regnum, + u16 val) +{ + struct vsc73xx *vsc = ds->priv; + u32 cmd; + int ret; + + /* It was found through tedious experiments that this router + * chip really hates to have it's PHYs reset. They + * never recover if that happens: autonegotiation stops + * working after a reset. Just filter out this command. + * (Resetting the whole chip is OK.) + */ + if (regnum == 0 && (val & BIT(15))) { + dev_info(vsc->dev, "reset PHY - disallowed\n"); + return 0; + } + + cmd = (phy << 21) | (regnum << 16); + ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd); + if (ret) + return ret; + + dev_dbg(vsc->dev, "write %04x to reg %02x in phy%d\n", + val, regnum, phy); + return 0; +} + +static enum dsa_tag_protocol vsc73xx_get_tag_protocol(struct dsa_switch *ds, + int port) +{ + /* The switch internally uses a 8 byte header with length, + * source port, tag, LPA and priority. This is supposedly + * only accessible when operating the switch using the internal + * CPU or with an external CPU mapping the device in, but not + * when operating the switch over SPI and putting frames in/out + * on port 6 (the CPU port). So far we must assume that we + * cannot access the tag. (See "Internal frame header" section + * 3.9.1 in the manual.) + */ + return DSA_TAG_PROTO_NONE; +} + +static int vsc73xx_setup(struct dsa_switch *ds) +{ + struct vsc73xx *vsc = ds->priv; + int i; + + dev_info(vsc->dev, "set up the switch\n"); + + /* Issue RESET */ + vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET, + VSC73XX_GLORESET_MASTER_RESET); + usleep_range(125, 200); + + /* Initialize memory, initialize RAM bank 0..15 except 6 and 7 + * This sequence appears in the + * VSC7385 SparX-G5 datasheet section 6.6.1 + * VSC7395 SparX-G5e datasheet section 6.6.1 + * "initialization sequence". + * No explanation is given to the 0x1010400 magic number. + */ + for (i = 0; i <= 15; i++) { + if (i != 6 && i != 7) { + vsc73xx_write(vsc, VSC73XX_BLOCK_MEMINIT, + 2, + 0, 0x1010400 + i); + mdelay(1); + } + } + mdelay(30); + + /* Clear MAC table */ + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_MACACCESS, + VSC73XX_MACACCESS_CMD_CLEAR_TABLE); + + /* Clear VLAN table */ + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_VLANACCESS, + VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE); + + msleep(40); + + /* Use 20KiB buffers on all ports on VSC7395 + * The VSC7385 has 16KiB buffers and that is the + * default if we don't set this up explicitly. + * Port "31" is "all ports". + */ + if (IS_739X(vsc)) + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 0x1f, + VSC73XX_Q_MISC_CONF, + VSC73XX_Q_MISC_CONF_EXTENT_MEM); + + /* Put all ports into reset until enabled */ + for (i = 0; i < 7; i++) { + if (i == 5) + continue; + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 4, + VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET); + } + + /* MII delay, set both GTX and RX delay to 2 ns */ + vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY, + VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS | + VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS); + /* Enable reception of frames on all ports */ + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_RECVMASK, + 0x5f); + /* IP multicast flood mask (table 144) */ + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK, + 0xff); + + mdelay(50); + + /* Release reset from the internal PHYs */ + vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET, + VSC73XX_GLORESET_PHY_RESET); + + udelay(4); + + return 0; +} + +static void vsc73xx_init_port(struct vsc73xx *vsc, int port) +{ + u32 val; + + /* MAC configure, first reset the port and then write defaults */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, + VSC73XX_MAC_CFG, + VSC73XX_MAC_CFG_RESET); + + /* Take up the port in 1Gbit mode by default, this will be + * augmented after auto-negotiation on the PHY-facing + * ports. + */ + if (port == CPU_PORT) + val = VSC73XX_MAC_CFG_1000M_F_RGMII; + else + val = VSC73XX_MAC_CFG_1000M_F_PHY; + + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, + VSC73XX_MAC_CFG, + val | + VSC73XX_MAC_CFG_TX_EN | + VSC73XX_MAC_CFG_RX_EN); + + /* Max length, we can do up to 9.6 KiB, so allow that. + * According to application not "VSC7398 Jumbo Frames" setting + * up the MTU to 9.6 KB does not affect the performance on standard + * frames, so just enable it. It is clear from the application note + * that "9.6 kilobytes" == 9600 bytes. + */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, + VSC73XX_MAXLEN, 9600); + + /* Flow control for the CPU port: + * Use a zero delay pause frame when pause condition is left + * Obey pause control frames + */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, + VSC73XX_FCCONF, + VSC73XX_FCCONF_ZERO_PAUSE_EN | + VSC73XX_FCCONF_FLOW_CTRL_OBEY); + + /* Issue pause control frames on PHY facing ports. + * Allow early initiation of MAC transmission if the amount + * of egress data is below 512 bytes on CPU port. + * FIXME: enable 20KiB buffers? + */ + if (port == CPU_PORT) + val = VSC73XX_Q_MISC_CONF_EARLY_TX_512; + else + val = VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE; + val |= VSC73XX_Q_MISC_CONF_EXTENT_MEM; + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, + VSC73XX_Q_MISC_CONF, + val); + + /* Flow control MAC: a MAC address used in flow control frames */ + val = (vsc->addr[5] << 16) | (vsc->addr[4] << 8) | (vsc->addr[3]); + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, + VSC73XX_FCMACHI, + val); + val = (vsc->addr[2] << 16) | (vsc->addr[1] << 8) | (vsc->addr[0]); + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, + VSC73XX_FCMACLO, + val); + + /* Tell the categorizer to forward pause frames, not control + * frame. Do not drop anything. + */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, + VSC73XX_CAT_DROP, + VSC73XX_CAT_DROP_FWD_PAUSE_ENA); + + /* Clear all counters */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, VSC73XX_C_RX0, 0); +} + +static void vsc73xx_adjust_enable_port(struct vsc73xx *vsc, + int port, struct phy_device *phydev, + u32 initval) +{ + u32 val = initval; + u8 seed; + + /* Reset this port FIXME: break out subroutine */ + val |= VSC73XX_MAC_CFG_RESET; + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val); + + /* Seed the port randomness with randomness */ + get_random_bytes(&seed, 1); + val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET; + val |= VSC73XX_MAC_CFG_SEED_LOAD; + val |= VSC73XX_MAC_CFG_WEXC_DIS; + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val); + + /* Flow control for the PHY facing ports: + * Use a zero delay pause frame when pause condition is left + * Obey pause control frames + * When generating pause frames, use 0xff as pause value + */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_FCCONF, + VSC73XX_FCCONF_ZERO_PAUSE_EN | + VSC73XX_FCCONF_FLOW_CTRL_OBEY | + 0xff); + + /* Disallow backward dropping of frames from this port */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_SBACKWDROP, BIT(port), 0); + + /* Enable TX, RX, deassert reset, stop loading seed */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, + VSC73XX_MAC_CFG, + VSC73XX_MAC_CFG_RESET | VSC73XX_MAC_CFG_SEED_LOAD | + VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN, + VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN); +} + +static void vsc73xx_adjust_link(struct dsa_switch *ds, int port, + struct phy_device *phydev) +{ + struct vsc73xx *vsc = ds->priv; + u32 val; + + /* Special handling of the CPU-facing port */ + if (port == CPU_PORT) { + /* Other ports are already initialized but not this one */ + vsc73xx_init_port(vsc, CPU_PORT); + /* Select the external port for this interface (EXT_PORT) + * Enable the GMII GTX external clock + * Use double data rate (DDR mode) + */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + CPU_PORT, + VSC73XX_ADVPORTM, + VSC73XX_ADVPORTM_EXT_PORT | + VSC73XX_ADVPORTM_ENA_GTX | + VSC73XX_ADVPORTM_DDR_MODE); + } + + /* This is the MAC confiuration that always need to happen + * after a PHY or the CPU port comes up or down. + */ + if (!phydev->link) { + int maxloop = 10; + + dev_dbg(vsc->dev, "port %d: went down\n", + port); + + /* Disable RX on this port */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, + VSC73XX_MAC_CFG, + VSC73XX_MAC_CFG_RX_EN, 0); + + /* Discard packets */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_ARBDISC, BIT(port), BIT(port)); + + /* Wait until queue is empty */ + vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_ARBEMPTY, &val); + while (!(val & BIT(port))) { + msleep(1); + vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_ARBEMPTY, &val); + if (--maxloop == 0) { + dev_err(vsc->dev, + "timeout waitting for block arbiter\n"); + /* Continue anyway */ + break; + } + } + + /* Put this port into reset */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, + VSC73XX_MAC_CFG_RESET); + + /* Accept packets again */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_ARBDISC, BIT(port), 0); + + /* Allow backward dropping of frames from this port */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_SBACKWDROP, BIT(port), BIT(port)); + + /* Receive mask (disable forwarding) */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_RECVMASK, BIT(port), 0); + + return; + } + + /* Figure out what speed was negotiated */ + if (phydev->speed == SPEED_1000) { + dev_dbg(vsc->dev, "port %d: 1000 Mbit mode full duplex\n", + port); + + /* Set up default for internal port or external RGMII */ + if (phydev->interface == PHY_INTERFACE_MODE_RGMII) + val = VSC73XX_MAC_CFG_1000M_F_RGMII; + else + val = VSC73XX_MAC_CFG_1000M_F_PHY; + vsc73xx_adjust_enable_port(vsc, port, phydev, val); + } else if (phydev->speed == SPEED_100) { + if (phydev->duplex == DUPLEX_FULL) { + val = VSC73XX_MAC_CFG_100_10M_F_PHY; + dev_dbg(vsc->dev, + "port %d: 100 Mbit full duplex mode\n", + port); + } else { + val = VSC73XX_MAC_CFG_100_10M_H_PHY; + dev_dbg(vsc->dev, + "port %d: 100 Mbit half duplex mode\n", + port); + } + vsc73xx_adjust_enable_port(vsc, port, phydev, val); + } else if (phydev->speed == SPEED_10) { + if (phydev->duplex == DUPLEX_FULL) { + val = VSC73XX_MAC_CFG_100_10M_F_PHY; + dev_dbg(vsc->dev, + "port %d: 10 Mbit full duplex mode\n", + port); + } else { + val = VSC73XX_MAC_CFG_100_10M_H_PHY; + dev_dbg(vsc->dev, + "port %d: 10 Mbit half duplex mode\n", + port); + } + vsc73xx_adjust_enable_port(vsc, port, phydev, val); + } else { + dev_err(vsc->dev, + "could not adjust link: unknown speed\n"); + } + + /* Enable port (forwarding) in the receieve mask */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_RECVMASK, BIT(port), BIT(port)); +} + +static int vsc73xx_port_enable(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct vsc73xx *vsc = ds->priv; + + dev_info(vsc->dev, "enable port %d\n", port); + vsc73xx_init_port(vsc, port); + + return 0; +} + +static void vsc73xx_port_disable(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct vsc73xx *vsc = ds->priv; + + /* Just put the port into reset */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, + VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET); +} + +static const struct vsc73xx_counter * +vsc73xx_find_counter(struct vsc73xx *vsc, + u8 counter, + bool tx) +{ + const struct vsc73xx_counter *cnts; + int num_cnts; + int i; + + if (tx) { + cnts = vsc73xx_tx_counters; + num_cnts = ARRAY_SIZE(vsc73xx_tx_counters); + } else { + cnts = vsc73xx_rx_counters; + num_cnts = ARRAY_SIZE(vsc73xx_rx_counters); + } + + for (i = 0; i < num_cnts; i++) { + const struct vsc73xx_counter *cnt; + + cnt = &cnts[i]; + if (cnt->counter == counter) + return cnt; + } + + return NULL; +} + +void vsc73xx_get_strings(struct dsa_switch *ds, int port, u32 stringset, + uint8_t *data) +{ + const struct vsc73xx_counter *cnt; + struct vsc73xx *vsc = ds->priv; + u8 indices[6]; + int i, j; + u32 val; + int ret; + + if (stringset != ETH_SS_STATS) + return; + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port, + VSC73XX_C_CFG, &val); + if (ret) + return; + + indices[0] = (val & 0x1f); /* RX counter 0 */ + indices[1] = ((val >> 5) & 0x1f); /* RX counter 1 */ + indices[2] = ((val >> 10) & 0x1f); /* RX counter 2 */ + indices[3] = ((val >> 16) & 0x1f); /* TX counter 0 */ + indices[4] = ((val >> 21) & 0x1f); /* TX counter 1 */ + indices[5] = ((val >> 26) & 0x1f); /* TX counter 2 */ + + /* The first counters is the RX octets */ + j = 0; + strncpy(data + j * ETH_GSTRING_LEN, + "RxEtherStatsOctets", ETH_GSTRING_LEN); + j++; + + /* Each port supports recording 3 RX counters and 3 TX counters, + * figure out what counters we use in this set-up and return the + * names of them. The hardware default counters will be number of + * packets on RX/TX, combined broadcast+multicast packets RX/TX and + * total error packets RX/TX. + */ + for (i = 0; i < 3; i++) { + cnt = vsc73xx_find_counter(vsc, indices[i], false); + if (cnt) + strncpy(data + j * ETH_GSTRING_LEN, + cnt->name, ETH_GSTRING_LEN); + j++; + } + + /* TX stats begins with the number of TX octets */ + strncpy(data + j * ETH_GSTRING_LEN, + "TxEtherStatsOctets", ETH_GSTRING_LEN); + j++; + + for (i = 3; i < 6; i++) { + cnt = vsc73xx_find_counter(vsc, indices[i], true); + if (cnt) + strncpy(data + j * ETH_GSTRING_LEN, + cnt->name, ETH_GSTRING_LEN); + j++; + } +} + +int vsc73xx_get_sset_count(struct dsa_switch *ds, int port, int sset) +{ + /* We only support SS_STATS */ + if (sset != ETH_SS_STATS) + return 0; + /* RX and TX packets, then 3 RX counters, 3 TX counters */ + return 8; +} + +void vsc73xx_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) +{ + struct vsc73xx *vsc = ds->priv; + u8 regs[] = { + VSC73XX_RXOCT, + VSC73XX_C_RX0, + VSC73XX_C_RX1, + VSC73XX_C_RX2, + VSC73XX_TXOCT, + VSC73XX_C_TX0, + VSC73XX_C_TX1, + VSC73XX_C_TX2, + }; + u32 val; + int ret; + int i; + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port, + regs[i], &val); + if (ret) { + dev_err(vsc->dev, "error reading counter %d\n", i); + return; + } + data[i] = val; + } +} + +static const struct dsa_switch_ops vsc73xx_ds_ops = { + .get_tag_protocol = vsc73xx_get_tag_protocol, + .setup = vsc73xx_setup, + .phy_read = vsc73xx_phy_read, + .phy_write = vsc73xx_phy_write, + .adjust_link = vsc73xx_adjust_link, + .get_strings = vsc73xx_get_strings, + .get_ethtool_stats = vsc73xx_get_ethtool_stats, + .get_sset_count = vsc73xx_get_sset_count, + .port_enable = vsc73xx_port_enable, + .port_disable = vsc73xx_port_disable, +}; + +static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct vsc73xx *vsc = gpiochip_get_data(chip); + u32 val; + int ret; + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_GPIO, &val); + if (ret) + return ret; + + return !!(val & BIT(offset)); +} + +static void vsc73xx_gpio_set(struct gpio_chip *chip, unsigned int offset, + int val) +{ + struct vsc73xx *vsc = gpiochip_get_data(chip); + u32 tmp = val ? BIT(offset) : 0; + + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_GPIO, BIT(offset), tmp); +} + +static int vsc73xx_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int val) +{ + struct vsc73xx *vsc = gpiochip_get_data(chip); + u32 tmp = val ? BIT(offset) : 0; + + return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_GPIO, BIT(offset + 4) | BIT(offset), + BIT(offset + 4) | tmp); +} + +static int vsc73xx_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct vsc73xx *vsc = gpiochip_get_data(chip); + + return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_GPIO, BIT(offset + 4), + 0); +} + +static int vsc73xx_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct vsc73xx *vsc = gpiochip_get_data(chip); + u32 val; + int ret; + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_GPIO, &val); + if (ret) + return ret; + + return !(val & BIT(offset + 4)); +} + +static int vsc73xx_gpio_probe(struct vsc73xx *vsc) +{ + int ret; + + vsc->gc.label = devm_kasprintf(vsc->dev, GFP_KERNEL, "VSC%04x", + vsc->chipid); + vsc->gc.ngpio = 4; + vsc->gc.owner = THIS_MODULE; + vsc->gc.parent = vsc->dev; + vsc->gc.of_node = vsc->dev->of_node; + vsc->gc.base = -1; + vsc->gc.get = vsc73xx_gpio_get; + vsc->gc.set = vsc73xx_gpio_set; + vsc->gc.direction_input = vsc73xx_gpio_direction_input; + vsc->gc.direction_output = vsc73xx_gpio_direction_output; + vsc->gc.get_direction = vsc73xx_gpio_get_direction; + vsc->gc.can_sleep = true; + ret = devm_gpiochip_add_data(vsc->dev, &vsc->gc, vsc); + if (ret) { + dev_err(vsc->dev, "unable to register GPIO chip\n"); + return ret; + } + return 0; +} + +static int vsc73xx_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct vsc73xx *vsc; + int ret; + + vsc = devm_kzalloc(dev, sizeof(*vsc), GFP_KERNEL); + if (!vsc) + return -ENOMEM; + + spi_set_drvdata(spi, vsc); + vsc->spi = spi_dev_get(spi); + vsc->dev = dev; + mutex_init(&vsc->lock); + + /* Release reset, if any */ + vsc->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(vsc->reset)) { + dev_err(dev, "failed to get RESET GPIO\n"); + return PTR_ERR(vsc->reset); + } + if (vsc->reset) + /* Wait 20ms according to datasheet table 245 */ + msleep(20); + + spi->mode = SPI_MODE_0; + spi->bits_per_word = 8; + ret = spi_setup(spi); + if (ret < 0) { + dev_err(dev, "spi setup failed.\n"); + return ret; + } + + ret = vsc73xx_detect(vsc); + if (ret) { + dev_err(dev, "no chip found (%d)\n", ret); + return -ENODEV; + } + + eth_random_addr(vsc->addr); + dev_info(vsc->dev, + "MAC for control frames: %02X:%02X:%02X:%02X:%02X:%02X\n", + vsc->addr[0], vsc->addr[1], vsc->addr[2], + vsc->addr[3], vsc->addr[4], vsc->addr[5]); + + /* The VSC7395 switch chips have 5+1 ports which means 5 + * ordinary ports and a sixth CPU port facing the processor + * with an RGMII interface. These ports are numbered 0..4 + * and 6, so they leave a "hole" in the port map for port 5, + * which is invalid. + * + * The VSC7398 has 8 ports, port 7 is again the CPU port. + * + * We allocate 8 ports and avoid access to the nonexistant + * ports. + */ + vsc->ds = dsa_switch_alloc(dev, 8); + if (!vsc->ds) + return -ENOMEM; + vsc->ds->priv = vsc; + + vsc->ds->ops = &vsc73xx_ds_ops; + ret = dsa_register_switch(vsc->ds); + if (ret) { + dev_err(dev, "unable to register switch (%d)\n", ret); + return ret; + } + + ret = vsc73xx_gpio_probe(vsc); + if (ret) { + dsa_unregister_switch(vsc->ds); + return ret; + } + + return 0; +} + +static int vsc73xx_remove(struct spi_device *spi) +{ + struct vsc73xx *vsc = spi_get_drvdata(spi); + + dsa_unregister_switch(vsc->ds); + gpiod_set_value(vsc->reset, 1); + + return 0; +} + +static const struct of_device_id vsc73xx_of_match[] = { + { + .compatible = "vitesse,vsc7385", + }, + { + .compatible = "vitesse,vsc7388", + }, + { + .compatible = "vitesse,vsc7395", + }, + { + .compatible = "vitesse,vsc7398", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, vsc73xx_of_match); + +static struct spi_driver vsc73xx_driver = { + .probe = vsc73xx_probe, + .remove = vsc73xx_remove, + .driver = { + .name = "vsc73xx", + .of_match_table = vsc73xx_of_match, + }, +}; +module_spi_driver(vsc73xx_driver); + +MODULE_AUTHOR("Linus Walleij "); +MODULE_DESCRIPTION("Vitesse VSC7385/7388/7395/7398 driver"); +MODULE_LICENSE("GPL v2");