| Message ID | 20201208141012.6033-1-bongsu.jeon@samsung.com |
|---|---|
| Headers | show |
| Series | nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING | expand |
From: Bongsu Jeon <bongsu.jeon2@gmail.com> Date: Tue, 8 Dec 2020 23:10:10 +0900 > From: Bongsu Jeon <bongsu.jeon@samsung.com> > > For stable Samsung's I2C interrupt handling, I changed the interrupt > trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING and removed > the hard coded interrupt trigger type in the i2c module for the flexible > control. > > 1/2 is the changed dt binding for the edge rising trigger. > 2/2 is to remove the hard coded interrupt trigger type in the i2c module. > > ChangeLog: > v2: > 2/2 > - remove the hard coded interrupt trigger type. Series applied, thanks.
From: Bongsu Jeon <bongsu.jeon@samsung.com> For stable Samsung's I2C interrupt handling, I changed the interrupt trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING and removed the hard coded interrupt trigger type in the i2c module for the flexible control. 1/2 is the changed dt binding for the edge rising trigger. 2/2 is to remove the hard coded interrupt trigger type in the i2c module. ChangeLog: v2: 2/2 - remove the hard coded interrupt trigger type. Bongsu Jeon (2): dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c module .../devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml | 2 +- drivers/nfc/s3fwrn5/i2c.c | 8 +++++++- 2 files changed, 8 insertions(+), 2 deletions(-)