mbox series

[v3,0/2] Add Ethernet support for Intel Keem Bay SoC

Message ID 1598416422-30796-1-git-send-email-vineetha.g.jaya.kumaran@intel.com
Headers show
Series Add Ethernet support for Intel Keem Bay SoC | expand

Message

vineetha.g.jaya.kumaran@intel.com Aug. 26, 2020, 4:33 a.m. UTC 
From: "Vineetha G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>

Hello,

This patch set enables support for Ethernet on the Intel Keem Bay SoC.
The first patch contains the required Device Tree bindings documentation, 
while the second patch adds the Intel platform glue layer for the stmmac
device driver.

This driver was tested on the Keem Bay evaluation module board.

Thank you.

Best regards,
Vineetha

Changes since v2:
-Add a select in DT documentation to avoid matching with all nodes containing 'snps,dwmac'
-Rebased to 5.9-rc1

Changes since v1:
-Removed clocks maxItems property from DT bindings documentation
-Removed phy compatible strings from DT bindings documentation

Rusaimi Amira Ruslan (1):
  net: stmmac: Add dwmac-intel-plat for GBE driver

Vineetha G. Jaya Kumaran (1):
  dt-bindings: net: Add bindings for Intel Keem Bay

 .../devicetree/bindings/net/intel,dwmac-plat.yaml  | 130 ++++++++++++++
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |  10 ++
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
 .../net/ethernet/stmicro/stmmac/dwmac-intel-plat.c | 191 +++++++++++++++++++++
 4 files changed, 332 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c