diff mbox series

[v2,5/5] arm64: dts: sprd: Remove wildcard compatible string

Message ID f34970a034946bacda19202e2ce9973ca732c925.1550060544.git.baolin.wang@linaro.org
State New
Headers show
Series None | expand

Commit Message

(Exiting) Baolin Wang Feb. 13, 2019, 12:32 p.m. UTC 
Remove wildcard compatible string.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>

---
 arch/arm64/boot/dts/sprd/sc2731.dtsi |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

-- 
1.7.9.5

Comments

Arnd Bergmann Feb. 13, 2019, 2:31 p.m. UTC | #1 
On Wed, Feb 13, 2019 at 1:34 PM Baolin Wang <baolin.wang@linaro.org> wrote:
>

> Remove wildcard compatible string.

>

> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>



Looks good to me. It does break using the new dtb file on older kernels,
but I suppose this is not a case we care much about yet on your
platform, given that both the dts file sand the drivers in the
kernel are still  work in progress.

I had started the other reply I just sent before I saw this new mail.

    Arnd
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
index 4a79ddf..e15409f 100644
--- a/arch/arm64/boot/dts/sprd/sc2731.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
@@ -24,7 +24,7 @@ 
 		};
 
 		led-controller@200 {
-			compatible = "sprd,sc27xx-bltc", "sprd,sc2731-bltc";
+			compatible = "sprd,sc2731-bltc";
 			reg = <0x200>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -46,14 +46,14 @@ 
 		};
 
 		rtc@280 {
-			compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc";
+			compatible = "sprd,sc2731-rtc";
 			reg = <0x280>;
 			interrupt-parent = <&sc2731_pmic>;
 			interrupts = <2>;
 		};
 
 		pmic_eic: gpio@300 {
-			compatible = "sprd,sc27xx-eic";
+			compatible = "sprd,sc2731-eic";
 			reg = <0x300>;
 			interrupt-parent = <&sc2731_pmic>;
 			interrupts = <5>;
@@ -64,7 +64,7 @@ 
 		};
 
 		efuse@380 {
-			compatible = "sprd,sc27xx-efuse", "sprd,sc2731-efuse";
+			compatible = "sprd,sc2731-efuse";
 			reg = <0x380>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -85,7 +85,7 @@ 
 		};
 
 		pmic_adc: adc@480 {
-			compatible = "sprd,sc27xx-adc", "sprd,sc2731-adc";
+			compatible = "sprd,sc2731-adc";
 			reg = <0x480>;
 			interrupt-parent = <&sc2731_pmic>;
 			interrupts = <0>;
@@ -109,12 +109,12 @@ 
 		};
 
 		vibrator@ec8 {
-			compatible = "sprd,sc27xx-vibrator", "sprd,sc2731-vibrator";
+			compatible = "sprd,sc2731-vibrator";
 			reg = <0xec8>;
 		};
 
 		regulators {
-			compatible = "sprd,sc27xx-regulator";
+			compatible = "sprd,sc2731-regulator";
 
 			vddarm0: BUCK_CPU0 {
 				regulator-name = "vddarm0";