From patchwork Fri Oct 18 12:25:10 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 176807 Delivered-To: patch@linaro.org Received: by 2002:a92:7e96:0:0:0:0:0 with SMTP id q22csp788148ill; Fri, 18 Oct 2019 05:26:24 -0700 (PDT) X-Google-Smtp-Source: APXvYqySt0GZMoGoHVQqmF47v2nor9gkXaWU/s7FuPDxGF1BHZMKkDXRLKNW41qdzAqq3LlaIVQl X-Received: by 2002:a05:6402:1b88:: with SMTP id cc8mr9267021edb.22.1571401584037; Fri, 18 Oct 2019 05:26:24 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1571401584; cv=none; d=google.com; s=arc-20160816; b=RxpFV0Ky1muByEksUbt83SXkiLv1CXnnljp05wcDR5Y7wLnjb1H/0NU9iIgC/JTHT9 EFnvZKKyzjZcVLVCTjx1vbku5hB0+q+xexq8RQfDQ6RGdRUDEDLY0OnkZ3TgNnw4PdAT 9RnBsQqMwHJRul8vXALBpOY2BkOBiHUW4Owo6N3HUl8bajSd1ON024rt2VschCXA9glD npHb8njZVieBiLxdmrDHLjSC92yUvMC2l7nQ3IgVyq9JGs/wMPjgbXsCGyAwu8LBt8ay PsQO5ph6xIZXuW3RCRzZz5DOUp2DN8NUmr5QlzaZtK8YFtrb4ydP5z1SsIjyAhlq1rG1 srgA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=ynnE2bcE7/pjTvuXLjgDaxUYtz5RYI+D7gB1BXxX9Io=; b=ybNbTXdmlgZyr7XcEcugbV/V5lOpoLnSGCA8VySno61tUrl99qbPpEcyMb7w4QDrFH zzftdtw5fwkZex+lnwDLcfEnnBg/LGwcWqQFQGIMgR+72Itg+EdnNzwKtt+dU8lr2/BV J0eboekykjV79X6h//79bpJBFv2qkfPTnmQVUMve6Hmu10d89MJ+Z64Nw+E8JRsfYKjv bstJeKld4NqSridqMZZekwq83TOaWRWIyThynzkTwliaFsw8uIRFxcrHSER6oRNxDDPx DJ4+00LmC6IWCqNu2Fy6ATc52NXIQTkCE40mElMXGBwt7YM5eZ5redTeCosVM6dyJ9JG xSEg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=TA8tdmBm; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id l22si3596899edb.241.2019.10.18.05.26.23; Fri, 18 Oct 2019 05:26:24 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=TA8tdmBm; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2633790AbfJRM0T (ORCPT + 26 others); Fri, 18 Oct 2019 08:26:19 -0400 Received: from fllv0016.ext.ti.com ([198.47.19.142]:48456 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2633756AbfJRM0J (ORCPT ); Fri, 18 Oct 2019 08:26:09 -0400 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id x9ICPufK066233; Fri, 18 Oct 2019 07:25:56 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1571401556; bh=ynnE2bcE7/pjTvuXLjgDaxUYtz5RYI+D7gB1BXxX9Io=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=TA8tdmBmQR3ckoa7jNrxCwq6t4j1MotsVIup6a5SPQJhNv7vOLR/MEHdDi0hITifj 06YxwPqOnffYRZydHqhzERcO4Y1pldd2S1IFYuWpZyNARvIrJUkgXyf0AcOulh3zhV c+OVTb5HDUaIw8KR3Gujn7A4UliWVuR7dsH8J3vg= Received: from DLEE113.ent.ti.com (dlee113.ent.ti.com [157.170.170.24]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id x9ICPukV091725; Fri, 18 Oct 2019 07:25:56 -0500 Received: from DLEE104.ent.ti.com (157.170.170.34) by DLEE113.ent.ti.com (157.170.170.24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1713.5; Fri, 18 Oct 2019 07:25:48 -0500 Received: from fllv0040.itg.ti.com (10.64.41.20) by DLEE104.ent.ti.com (157.170.170.34) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1713.5 via Frontend Transport; Fri, 18 Oct 2019 07:25:48 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0040.itg.ti.com (8.15.2/8.15.2) with ESMTP id x9ICPuAM092012; Fri, 18 Oct 2019 07:25:56 -0500 From: Dan Murphy To: , CC: , , Dan Murphy , Linus Walleij , Tony Lindgren , =?utf-8?q?Beno=C3=AEt_Cousson?= , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team Subject: [PATCH v14 08/19] dt: bindings: lp55xx: Update binding for Multicolor Framework Date: Fri, 18 Oct 2019 07:25:10 -0500 Message-ID: <20191018122521.6757-9-dmurphy@ti.com> X-Mailer: git-send-email 2.22.0.214.g8dca754b1e In-Reply-To: <20191018122521.6757-1-dmurphy@ti.com> References: <20191018122521.6757-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Update the DT binding to include the properties to use the multicolor framework for the devices that use the LP55xx framework. Reviewed-by: Linus Walleij Signed-off-by: Dan Murphy CC: Tony Lindgren CC: "BenoƮt Cousson" CC: Linus Walleij CC: Shawn Guo CC: Sascha Hauer CC: Pengutronix Kernel Team CC: Fabio Estevam CC: NXP Linux Team --- .../devicetree/bindings/leds/leds-lp55xx.txt | 149 +++++++++++++++--- 1 file changed, 124 insertions(+), 25 deletions(-) -- 2.22.0.214.g8dca754b1e diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt index bfe2805c5534..0ccc1efc2499 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt @@ -1,6 +1,8 @@ Binding for TI/National Semiconductor LP55xx LED Drivers Required properties: +- #address-cells: 1 +- #size-cells: 0 - compatible: one of national,lp5521 national,lp5523 @@ -14,6 +16,18 @@ Required properties: Each child has own specific current settings - led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected) - max-cur: Maximun current at each LED channel. +- reg: Output channel for the LED. This is zero based channel identifier and + the data sheet is a one based channel identifier. + reg value to output to LED output number + D1 = reg value is 0 + D2 = reg value is 1 + D3 = reg value is 2 + D4 = reg value is 3 + D5 = reg value is 4 + D6 = reg value is 5 + D7 = reg value is 6 + D8 = reg value is 7 + D9 = reg value is 8 Optional properties: - enable-gpio: GPIO attached to the chip's enable pin @@ -35,23 +49,28 @@ example 1) LP5521 on channel 0. lp5521@32 { + #address-cells = <1>; + #size-cells = <0>; compatible = "national,lp5521"; reg = <0x32>; label = "lp5521_pri"; clock-mode = /bits/ 8 <2>; - chan0 { + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; linux,default-trigger = "heartbeat"; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; @@ -70,59 +89,70 @@ ASEL1 ASEL0 Address VEN VEN 35h lp5523@32 { + #address-cells = <1>; + #size-cells = <0>; compatible = "national,lp5523"; reg = <0x32>; clock-mode = /bits/ 8 <1>; - chan0 { + chan@0 { + reg = <0>; chan-name = "d1"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan1 { + chan@1 { + reg = <1>; chan-name = "d2"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan2 { + chan@2 { + reg = <2>; chan-name = "d3"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan3 { + chan@3 { + reg = <3>; chan-name = "d4"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan4 { + chan@4 { + reg = <4>; chan-name = "d5"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan5 { + chan@5 { + reg = <5>; chan-name = "d6"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan6 { + chan@6 { + reg = <6>; chan-name = "d7"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan7 { + chan@7 { + reg = <7>; chan-name = "d8"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan8 { + chan@8 { + reg = <8>; chan-name = "d9"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; @@ -133,29 +163,35 @@ example 3) LP5562 4 channels are defined. lp5562@30 { + #address-cells = <1>; + #size-cells = <0>; compatible = "ti,lp5562"; reg = <0x30>; clock-mode = /bits/8 <2>; - chan0 { + chan@0 { + reg = <0>; chan-name = "R"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; }; - chan1 { + chan@1 { + reg = <1>; chan-name = "G"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; }; - chan2 { + chan@2 { + reg = <2>; chan-name = "B"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; }; - chan3 { + chan@3 { + reg = <3>; chan-name = "W"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; @@ -167,62 +203,125 @@ example 4) LP8501 Others are same as LP5523. lp8501@32 { + #address-cells = <1>; + #size-cells = <0>; compatible = "ti,lp8501"; reg = <0x32>; clock-mode = /bits/ 8 <2>; pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */ - chan0 { + chan@0 { + reg = <0>; chan-name = "d1"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan1 { + chan@1 { + reg = <1>; chan-name = "d2"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan2 { + chan@2 { + reg = <2>; chan-name = "d3"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan3 { + chan@3 { + reg = <3>; chan-name = "d4"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan4 { + chan@4 { + reg = <4>; chan-name = "d5"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan5 { + chan@5 { + reg = <5>; chan-name = "d6"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan6 { + chan@6 { + reg = <6>; chan-name = "d7"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan7 { + chan@7 { + reg = <7>; chan-name = "d8"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan8 { + chan@8 { + reg = <8>; chan-name = "d9"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; }; + +Multicolor Framework Support +In addition to the nodes and properties defined above for device support the +properties below are needed for multicolor framework support as defined in +Documentation/devicetree/bindings/leds/leds-class-multicolor.txt + +Required child properties for multicolor framework + - color : Must be LED_COLOR_ID_MULTI + - function : see Documentation/devicetree/bindings/leds/common.txt + +Required grandchildren properties + - reg : This is the LED output of the device + - color : see Documentation/devicetree/bindings/leds/common.txt + +Multicolor LED example: +led-controller@32 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "national,lp5523"; + reg = <0x32>; + clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ + + multi-led@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + color = ; + function = LED_FUNCTION_STANDBY; + linux,default-trigger = "heartbeat"; + + led@0 { + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + reg = <0x0>; + color = ; + }; + + led@1 { + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + reg = <0x1>; + color = ; + }; + + led@6 { + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + reg = <0x6>; + color = ; + }; + }; +};