From patchwork Fri Oct 11 13:06:49 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 175933 Delivered-To: patch@linaro.org Received: by 2002:a92:7e96:0:0:0:0:0 with SMTP id q22csp730013ill; Fri, 11 Oct 2019 06:07:40 -0700 (PDT) X-Google-Smtp-Source: APXvYqz1tFULMBADC4lIPUHzK+XJca/5h01cuqYbr/ymji7HechXBHefM3EjggVVfeViYfVT2Rb3 X-Received: by 2002:a17:906:c317:: with SMTP id s23mr14206345ejz.251.1570799259958; Fri, 11 Oct 2019 06:07:39 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1570799259; cv=none; d=google.com; s=arc-20160816; b=ZTUqKQ9l8ZFi9vZZ2uGuDcG5/89oGyPYrNxjN6iBLREnRnaVbIhpxVYorepyLavw7O P+nfBifP2BkdTwdwM3JgATsWwRaOxyIv7u1gg3Punao5VZDVVWQeuiSOhKok20PzC3lJ go6NZjQCkA1lpmbWNkrHRwCokFT0otxu0PCJS660tX+Mr1n4HyUTKOJM4G/GMmZOdCxg v+SC+1rMgQNW/CNwTlOZ0QyFWs5QSgS6XxC7GixmvR2zgqaHKbykoXw6bPvk5senfIOn 3nicQxu8QGaKKnqHCJnBYpcfVH5IfpVuRPV5q3Q25Bzzf915bCFhRo2RaWETpocjFJN3 yzxg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=JLAX1GO8r1BPAaQSP8nT877GyOWJiBCNm5vdl8bnxYc=; b=CHUG40GTuXE13OgWTt+2D9zCdOIlHpdgKDAJ0uCTMzN/J0ueFTtNGYTHntZc/lGJbB jXC9TXN0bmpEpjBS4KW92qfvlMBHm8Lq07KBs/WS7+h/dpW3UxSSuZOrxsBP9h1Oabm3 k0OhyRJNgg4FB7pBWhvYHjTSkgO333oflDghQ5QwfQgVM49XDUiFzH/Mt9Yz+72AMad1 UeeK4+xcErcrBj5uRdYqNAlPvCKyr6tCYVkZnOmQ3S2M95eaJ1WuATM849T4nv3So0jB 1MfRcGLcZ/+iH5SbQhX2kvTRqt+lrSBEi2FyMmxVUNsYy0v1csOe+yFbHxGu9AtWm5DV 24RA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=dLDs2JnZ; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id e11si5325418ejr.383.2019.10.11.06.07.39; Fri, 11 Oct 2019 06:07:39 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=dLDs2JnZ; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728413AbfJKNHg (ORCPT + 21 others); Fri, 11 Oct 2019 09:07:36 -0400 Received: from lelv0143.ext.ti.com ([198.47.23.248]:36974 "EHLO lelv0143.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728252AbfJKNHf (ORCPT ); Fri, 11 Oct 2019 09:07:35 -0400 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by lelv0143.ext.ti.com (8.15.2/8.15.2) with ESMTP id x9BD7KXJ078497; Fri, 11 Oct 2019 08:07:20 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1570799240; bh=JLAX1GO8r1BPAaQSP8nT877GyOWJiBCNm5vdl8bnxYc=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=dLDs2JnZk/WVVSC+eI7LkyUUolPAstp2e0aTvCtDcji8PQgC52mdme9ahOt9Jq5F6 wIRji60tWo81XrW1g0CNImfNq/ZfyX36HKYmX4Bh0LTioL8iDcK5b5/5NCSi17kW3W IH7Cm1ZOho6mo6yVTf/FaXd7Qtkhe/2ZjQwS1Q6w= Received: from DLEE108.ent.ti.com (dlee108.ent.ti.com [157.170.170.38]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id x9BD7K7t090711 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Fri, 11 Oct 2019 08:07:20 -0500 Received: from DLEE100.ent.ti.com (157.170.170.30) by DLEE108.ent.ti.com (157.170.170.38) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1713.5; Fri, 11 Oct 2019 08:07:16 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE100.ent.ti.com (157.170.170.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1713.5 via Frontend Transport; Fri, 11 Oct 2019 08:07:20 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id x9BD7Kla105215; Fri, 11 Oct 2019 08:07:20 -0500 From: Dan Murphy To: , CC: , , Dan Murphy , Tony Lindgren , =?utf-8?q?Beno?= =?utf-8?q?=C3=AEt_Cousson?= , Linus Walleij , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team Subject: [PATCH v12 08/16] dt: bindings: lp55xx: Update binding for Multicolor Framework Date: Fri, 11 Oct 2019 08:06:49 -0500 Message-ID: <20191011130657.4713-9-dmurphy@ti.com> X-Mailer: git-send-email 2.22.0.214.g8dca754b1e In-Reply-To: <20191011130657.4713-1-dmurphy@ti.com> References: <20191011130657.4713-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Update the DT binding to include the properties to use the multicolor framework for the devices that use the LP55xx framework. Signed-off-by: Dan Murphy CC: Tony Lindgren CC: "Benoît Cousson" CC: Linus Walleij CC: Shawn Guo CC: Sascha Hauer CC: Pengutronix Kernel Team CC: Fabio Estevam CC: NXP Linux Team --- .../devicetree/bindings/leds/leds-lp55xx.txt | 149 +++++++++++++++--- 1 file changed, 124 insertions(+), 25 deletions(-) -- 2.22.0.214.g8dca754b1e diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt index bfe2805c5534..736a2e1538be 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt @@ -1,6 +1,8 @@ Binding for TI/National Semiconductor LP55xx LED Drivers Required properties: +- #address-cells: 1 +- #size-cells: 0 - compatible: one of national,lp5521 national,lp5523 @@ -14,6 +16,18 @@ Required properties: Each child has own specific current settings - led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected) - max-cur: Maximun current at each LED channel. +- reg: Output channel for the LED. This is zero based channel identifier and + the data sheet is a one based channel identifier. + reg value to output to LED output number + D1 = reg value is 0 + D2 = reg value is 1 + D3 = reg value is 2 + D4 = reg value is 3 + D5 = reg value is 4 + D6 = reg value is 5 + D7 = reg value is 6 + D8 = reg value is 7 + D9 = reg value is 8 Optional properties: - enable-gpio: GPIO attached to the chip's enable pin @@ -35,23 +49,28 @@ example 1) LP5521 on channel 0. lp5521@32 { + #address-cells = <1>; + #size-cells = <0>; compatible = "national,lp5521"; reg = <0x32>; label = "lp5521_pri"; clock-mode = /bits/ 8 <2>; - chan0 { + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; linux,default-trigger = "heartbeat"; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; @@ -70,59 +89,70 @@ ASEL1 ASEL0 Address VEN VEN 35h lp5523@32 { + #address-cells = <1>; + #size-cells = <0>; compatible = "national,lp5523"; reg = <0x32>; clock-mode = /bits/ 8 <1>; - chan0 { + chan@0 { + reg = <0>; chan-name = "d1"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan1 { + chan@1 { + reg = <1>; chan-name = "d2"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan2 { + chan@2 { + reg = <2>; chan-name = "d3"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan3 { + chan@3 { + reg = <3>; chan-name = "d4"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan4 { + chan@4 { + reg = <4>; chan-name = "d5"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan5 { + chan@5 { + reg = <5>; chan-name = "d6"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan6 { + chan@6 { + reg = <6>; chan-name = "d7"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan7 { + chan@7 { + reg = <7>; chan-name = "d8"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan8 { + chan@8 { + reg = <8>; chan-name = "d9"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; @@ -133,29 +163,35 @@ example 3) LP5562 4 channels are defined. lp5562@30 { + #address-cells = <1>; + #size-cells = <0>; compatible = "ti,lp5562"; reg = <0x30>; clock-mode = /bits/8 <2>; - chan0 { + chan@0 { + reg = <0>; chan-name = "R"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; }; - chan1 { + chan@1 { + reg = <1>; chan-name = "G"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; }; - chan2 { + chan@2 { + reg = <2>; chan-name = "B"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; }; - chan3 { + chan@3 { + reg = <3>; chan-name = "W"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; @@ -167,62 +203,125 @@ example 4) LP8501 Others are same as LP5523. lp8501@32 { + #address-cells = <1>; + #size-cells = <0>; compatible = "ti,lp8501"; reg = <0x32>; clock-mode = /bits/ 8 <2>; pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */ - chan0 { + chan@0 { + reg = <0>; chan-name = "d1"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan1 { + chan@1 { + reg = <1>; chan-name = "d2"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan2 { + chan@2 { + reg = <2>; chan-name = "d3"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan3 { + chan@3 { + reg = <3>; chan-name = "d4"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan4 { + chan@4 { + reg = <4>; chan-name = "d5"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan5 { + chan@5 { + reg = <5>; chan-name = "d6"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan6 { + chan@6 { + reg = <6>; chan-name = "d7"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan7 { + chan@7 { + reg = <7>; chan-name = "d8"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; - chan8 { + chan@8 { + reg = <8>; chan-name = "d9"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; }; + +Multicolor Framework Support +In addition to the nodes and properties defined above for device support the +properties below are needed for multicolor framework support as defined in +Documentation/devicetree/bindings/leds/leds-class-multicolor.txt + +Required child properties for multicolor framework + - color : Must be LED_COLOR_ID_MULTI + - function : see Documentation/devicetree/bindings/leds/common.txt + +Required grandchildren properties + - reg : This is the LED output of the device + - color : see Documentation/devicetree/bindings/leds/common.txt + +Multicolor LED example: +lp5523: lp5523@32 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "national,lp5523"; + reg = <0x32>; + clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ + + multi-led@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + color = ; + function = LED_FUNCTION_STANDBY; + linux,default-trigger = "heartbeat"; + + led@0 { + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + reg = <0x0>; + color = ; + }; + + led@1 { + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + reg = <0x1>; + color = ; + }; + + led@6 { + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + reg = <0x6>; + color = ; + }; + }; +};