From patchwork Fri Jun 21 18:13:12 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Grygorii Strashko X-Patchwork-Id: 167414 Delivered-To: patch@linaro.org Received: by 2002:a92:4782:0:0:0:0:0 with SMTP id e2csp1064663ilk; Fri, 21 Jun 2019 11:14:51 -0700 (PDT) X-Google-Smtp-Source: APXvYqxbmH55ZfD8R1d/Of0UPirpRqc/SOO5Tr3ybnp/m927LFMAL4RcaeL+eidNj8tQohanKuQc X-Received: by 2002:a17:90a:8a91:: with SMTP id x17mr8346848pjn.95.1561140891554; Fri, 21 Jun 2019 11:14:51 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1561140891; cv=none; d=google.com; s=arc-20160816; b=RbQr/0zQAQRMFDklSdrL6sqkvv4rEvL0XRO1Wd2BPcUtRUowxAAL2lyzxxwTeiTgdm TpgYw1SNN/9iz0gapladF0GJD6BRNbT39rlYrAirwFC4dq5FguOzvFEESPAV03yGzjdv obGBYJBiPTJxAkFr8+54pg1pwDB8qCwh/GCznDOkDeX0SHybN6GRDwqENUV7FdJnX5Sj MqdyzhNmkY3yi/i7JSctq3WC8mdL4KDm6+RNTg6wSKjsbz42eCs/dX8dR2DdYW6AyXPd veGqgnuV4R7lIGpCOvzqboIq2cPuvKD8QjEW5yzzvcnDY4iExXiz9w+qKriGMAMhk1yO xyIA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:dkim-signature; bh=0kcrlskjBWW8tIOPKfoD+qCVqgOiNazFqClLsMwNuF8=; b=y8hLE3WGniVRi9dfSUIbg8UxDozpXTnbz5MZcPtKClYk2beqDvfDwYVXuA3l8yJsRn VG/cEnzhjlwDQVcQ+Sgbrbzi85rVNvTEjCZYDcgVQdHjzzg1TA5XbcXepesBnT/UO73y JnOgd+sriofF8tV+WaQ+PbIB63hU5iPgMFq2Xft7CbsmYZ0OWahTKbK8/Iwf5jUh9IeJ PUpIl8aBLgy2P0URYKbxHv8uxDZgpel624+JQw+a73yXp7YSf7gJmRQPOoQk+/tFTbgt A3oy8TT4LqWE695+b05vdhYq8lM2q8C8VlMZxf8RIkxjr93LXdfosm8KPJpUi/qACyKF EVlw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=U47v+y9h; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id g15si3429374pjv.54.2019.06.21.11.14.51; Fri, 21 Jun 2019 11:14:51 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=U47v+y9h; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726810AbfFUSOt (ORCPT + 30 others); Fri, 21 Jun 2019 14:14:49 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:37766 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726756AbfFUSOp (ORCPT ); Fri, 21 Jun 2019 14:14:45 -0400 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id x5LIEJdI094312; Fri, 21 Jun 2019 13:14:19 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1561140859; bh=0kcrlskjBWW8tIOPKfoD+qCVqgOiNazFqClLsMwNuF8=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=U47v+y9hsaLKdjXa47gLjamjOvHFY2o6dJT4RZmKW55b1un+1UqAUXssy049XNOYf cclExNf9AjG/3XBbNwwmX24FzrTYo8Cncz0P5J8erdKKPb3H0lyTroMajwYD5yFCPW bwSxuY6SCUWO72LuR1mWG0zM+BneVXp4L9VaI8Zo= Received: from DLEE113.ent.ti.com (dlee113.ent.ti.com [157.170.170.24]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id x5LIEJAt069112 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Fri, 21 Jun 2019 13:14:19 -0500 Received: from DLEE102.ent.ti.com (157.170.170.32) by DLEE113.ent.ti.com (157.170.170.24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1713.5; Fri, 21 Jun 2019 13:14:18 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE102.ent.ti.com (157.170.170.32) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1713.5 via Frontend Transport; Fri, 21 Jun 2019 13:14:18 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id x5LIEH9Y093122; Fri, 21 Jun 2019 13:14:18 -0500 From: Grygorii Strashko To: , Ilias Apalodimas , Andrew Lunn , "David S . Miller" , Ivan Khoronzhuk , Jiri Pirko CC: Florian Fainelli , Sekhar Nori , , , Murali Karicheri , Ivan Vecera , Rob Herring , , Grygorii Strashko Subject: [RFC PATCH v4 net-next 09/11] Documentation: networking: add cpsw switchdev based driver documentation Date: Fri, 21 Jun 2019 21:13:12 +0300 Message-ID: <20190621181314.20778-10-grygorii.strashko@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190621181314.20778-1-grygorii.strashko@ti.com> References: <20190621181314.20778-1-grygorii.strashko@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Ilias Apalodimas A new cpsw dirver based on switchdev was added. Add documentation about basic configuration and future features Signed-off-by: Ilias Apalodimas Signed-off-by: Grygorii Strashko --- .../device_drivers/ti/cpsw_switchdev.txt | 207 ++++++++++++++++++ 1 file changed, 207 insertions(+) create mode 100644 Documentation/networking/device_drivers/ti/cpsw_switchdev.txt -- 2.17.1 diff --git a/Documentation/networking/device_drivers/ti/cpsw_switchdev.txt b/Documentation/networking/device_drivers/ti/cpsw_switchdev.txt new file mode 100644 index 000000000000..032943edf4fe --- /dev/null +++ b/Documentation/networking/device_drivers/ti/cpsw_switchdev.txt @@ -0,0 +1,207 @@ +* Texas Instruments CPSW switchdev based ethernet driver 2.0 + +- Port renaming +On older udev versions renaming of ethX to swXpY will not be automatically +supported +In order to rename via udev: +ip -d link show dev sw0p1 | grep switchid + +SUBSYSTEM=="net", ACTION=="add", ATTR{phys_switch_id}==, \ + ATTR{phys_port_name}!="", NAME="sw0$attr{phys_port_name}" + +==================== +# Dual mac mode +==================== +- The new (cpsw_new.c) driver is operating in dual-emac mode by default, thus +working as 2 individual network interfaces. Main differences from legacy CPSW +driver are: + - optimized promiscuous mode: The P0_UNI_FLOOD (both ports) is enabled in +addition to ALLMULTI (current port) instead of ALE_BYPASS. +So, Ports in promiscuous mode will keep possibility of mcast and vlan filtering, +which is provides significant benefits when ports are joined to the same bridge, +but without enabling "switch" mode, or to different bridges. + - learning disabled on ports as it make not too much sense for + segregated ports - no forwarding in HW. + - enabled basic support for devlink. + + devlink dev show + platform/48484000.ethernet_switch + + devlink dev param show + platform/48484000.ethernet_switch: + name switch_mode type driver-specific + values: + cmode runtime value false + name ale_bypass type driver-specific + values: + cmode runtime value false + - "ale_bypass" devlink driver parameter allows to enable ALE_CONTROL(4).BYPASS + mode for debug purposes + +==================== +# Bridging in dual mac mode +==================== +The dual_mac mode requires two vids to be reserved for internal purposes, +which, by default, equal CPSW Port numbers. As result, bridge has to be +configured in vlan unaware mode or default_pvid has to be adjusted. + + ip link add name br0 type bridge + ip link set dev br0 type bridge vlan_filtering 0 + echo 0 > /sys/class/net/br0/bridge/default_pvid + ip link set dev sw0p1 master br0 + ip link set dev sw0p2 master br0 + - or - + ip link add name br0 type bridge + ip link set dev br0 type bridge vlan_filtering 0 + echo 100 > /sys/class/net/br0/bridge/default_pvid + ip link set dev br0 type bridge vlan_filtering 1 + ip link set dev sw0p1 master br0 + ip link set dev sw0p2 master br0 + +==================== +# Enabling "switch" +==================== +The Switch mode can be enabled by configuring devlink driver parameter +"switch_mode" to 1/true: + devlink dev param set platform/48484000.ethernet_switch \ + name switch_mode value 1 cmode runtime + +This can be done regardless of the state of Port's netdev devices - UP/DOWN, but +Port's netdev devices have to be in UP before joining to the bridge to avoid +overwriting of bridge configuration as CPSW switch driver copletly reloads its +configuration when first Port changes its state to UP. + +When the both interfaces joined the bridge - CPSW switch driver will enable +marking packets with offload_fwd_mark flag unless "ale_bypass=0" + +All configuration is implemented via switchdev API. + +==================== +# Bridge setup +==================== + devlink dev param set platform/48484000.ethernet_switch \ + name switch_mode value 1 cmode runtime + + ip link add name br0 type bridge + ip link set dev br0 type bridge ageing_time 1000 + ip link set dev sw0p1 up + ip link set dev sw0p2 up + ip link set dev sw0p1 master br0 + ip link set dev sw0p2 master br0 + [*] bridge vlan add dev br0 vid 1 pvid untagged self + +[*] if vlan_filtering=1. where default_pvid=1 + +================= +# On/off STP +================= +ip link set dev BRDEV type bridge stp_state 1/0 + +Note. Steps [*] are mandatory. + +==================== +# VLAN configuration +==================== +bridge vlan add dev br0 vid 1 pvid untagged self <---- add cpu port to VLAN 1 + +Note. This step is mandatory for bridge/default_pvid. + +================= +# Add extra VLANs +================= + 1. untagged: + bridge vlan add dev sw0p1 vid 100 pvid untagged master + bridge vlan add dev sw0p2 vid 100 pvid untagged master + bridge vlan add dev br0 vid 100 pvid untagged self <---- Add cpu port to VLAN100 + + 2. tagged: + bridge vlan add dev sw0p1 vid 100 master + bridge vlan add dev sw0p2 vid 100 master + bridge vlan add dev br0 vid 100 pvid tagged self <---- Add cpu port to VLAN100 + +==== +FDBs +==== +FDBs are automatically added on the appropriate switch port upon detection + +Manually adding FDBs: +bridge fdb add aa:bb:cc:dd:ee:ff dev sw0p1 master vlan 100 +bridge fdb add aa:bb:cc:dd:ee:fe dev sw0p2 master <---- Add on all VLANs + +==== +MDBs +==== +MDBs are automatically added on the appropriate switch port upon detection + +Manually adding MDBs: +bridge mdb add dev br0 port sw0p1 grp 239.1.1.1 permanent vid 100 +bridge mdb add dev br0 port sw0p1 grp 239.1.1.1 permanent <---- Add on all VLANs + +================== +Multicast flooding +================== +CPU port mcast_flooding is always on + +Turning flooding on/off on swithch ports: +bridge link set dev sw0p1 mcast_flood on/off + +================== +Access and Trunk port +================== + bridge vlan add dev sw0p1 vid 100 pvid untagged master + bridge vlan add dev sw0p2 vid 100 master + + + bridge vlan add dev br0 vid 100 self + ip link add link br0 name br0.100 type vlan id 100 + + Note. Setting PVID on Bridge device itself working only for + default VLAN (default_pvid). + +===================== + NFS +===================== +The only way for NFS to work is by chrooting to a minimal environment when +switch configuration that will affect connectivity is needed. +Assuming you are booting NFS with eth1 interface(the script is hacky and +it's just there to prove NFS is doable). + +setup.sh: +#!/bin/sh +mkdir proc +mount -t proc none /proc +ifconfig br0 > /dev/null +if [ $? -ne 0 ]; then + echo "Setting up bridge" + ip link add name br0 type bridge + ip link set dev br0 type bridge ageing_time 1000 + ip link set dev br0 type bridge vlan_filtering 1 + + ip link set eth1 down + ip link set eth1 name sw0p1 + ip link set dev sw0p1 up + ip link set dev sw0p2 up + ip link set dev sw0p2 master br0 + ip link set dev sw0p1 master br0 + bridge vlan add dev br0 vid 1 pvid untagged self + ifconfig sw0p1 0.0.0.0 + udhchc -i br0 +fi +umount /proc + +run_nfs.sh: +#!/bin/sh +mkdir /tmp/root/bin -p +mkdir /tmp/root/lib -p + +cp -r /lib/ /tmp/root/ +cp -r /bin/ /tmp/root/ +cp /sbin/ip /tmp/root/bin +cp /sbin/bridge /tmp/root/bin +cp /sbin/ifconfig /tmp/root/bin +cp /sbin/udhcpc /tmp/root/bin +cp /path/to/setup.sh /tmp/root/bin +chroot /tmp/root/ busybox sh /bin/setup.sh + +run ./run_nfs.sh +