| Message ID | 20190613151323.10850-2-georgi.djakov@linaro.org |
|---|---|
| State | Accepted |
| Commit | 24f516ebbab8a212a9aa8c3d69f185371f5e200b |
| Headers | show |
| Series | Add QCS404 interconnect provider driver | expand |
On Thu 13 Jun 08:13 PDT 2019, Georgi Djakov wrote: > The Qualcomm QCS404 platform has several buses that could be controlled > and tuned according to the bandwidth demand. > > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> > --- > > v4: > - Add the DT header into this patch. > - Pick Bjorn's r-b. > > v3: > - Add a reg property and move the interconnect nodes under the "soc" node. > > v2: > - No changes. > > .../bindings/interconnect/qcom,qcs404.txt | 46 ++++++++++ > .../dt-bindings/interconnect/qcom,qcs404.h | 88 +++++++++++++++++++ > 2 files changed, 134 insertions(+) > create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt > create mode 100644 include/dt-bindings/interconnect/qcom,qcs404.h > > diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt > new file mode 100644 > index 000000000000..14a827268dda > --- /dev/null > +++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt > @@ -0,0 +1,46 @@ > +Qualcomm QCS404 Network-On-Chip interconnect driver binding > +----------------------------------------------------------- > + > +Required properties : > +- compatible : shall contain only one of the following: > + "qcom,qcs404-bimc" > + "qcom,qcs404-pcnoc" > + "qcom,qcs404-snoc" > +- #interconnect-cells : should contain 1 > + > +Optional properties : > +reg : specifies the physical base address and size of registers > +clocks : list of phandles and specifiers to all interconnect bus clocks > +clock-names : clock names should include both "bus_clk" and "bus_a_clk" Spoke to Rob about this patch, and I don't think these properties should not be described as optional. The reg isn't used unless we're implementing support for QoS, but let's include them in the binding as required anyways. Iirc the two clocks are required with the current implementation, but shouldn't there be an iface clock as well, for accessing the QoS register space? PS. As I read this again, please drop _clk from the two clocks names - we know they are clocks... Regards, Bjorn > + > +Example: > + > +soc { > + ... > + bimc: interconnect@400000 { > + reg = <0x00400000 0x80000>; > + compatible = "qcom,qcs404-bimc"; > + #interconnect-cells = <1>; > + clock-names = "bus_clk", "bus_a_clk"; > + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, > + <&rpmcc RPM_SMD_BIMC_A_CLK>; > + }; > + > + pnoc: interconnect@500000 { > + reg = <0x00500000 0x15080>; > + compatible = "qcom,qcs404-pcnoc"; > + #interconnect-cells = <1>; > + clock-names = "bus_clk", "bus_a_clk"; > + clocks = <&rpmcc RPM_SMD_PNOC_CLK>, > + <&rpmcc RPM_SMD_PNOC_A_CLK>; > + }; > + > + snoc: interconnect@580000 { > + reg = <0x00580000 0x23080>; > + compatible = "qcom,qcs404-snoc"; > + #interconnect-cells = <1>; > + clock-names = "bus_clk", "bus_a_clk"; > + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, > + <&rpmcc RPM_SMD_SNOC_A_CLK>; > + }; > +}; > diff --git a/include/dt-bindings/interconnect/qcom,qcs404.h b/include/dt-bindings/interconnect/qcom,qcs404.h > new file mode 100644 > index 000000000000..960f6e39c5f2 > --- /dev/null > +++ b/include/dt-bindings/interconnect/qcom,qcs404.h > @@ -0,0 +1,88 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Qualcomm interconnect IDs > + * > + * Copyright (c) 2019, Linaro Ltd. > + * Author: Georgi Djakov <georgi.djakov@linaro.org> > + */ > + > +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_QCS404_H > +#define __DT_BINDINGS_INTERCONNECT_QCOM_QCS404_H > + > +#define MASTER_AMPSS_M0 0 > +#define MASTER_OXILI 1 > +#define MASTER_MDP_PORT0 2 > +#define MASTER_SNOC_BIMC_1 3 > +#define MASTER_TCU_0 4 > +#define SLAVE_EBI_CH0 5 > +#define SLAVE_BIMC_SNOC 6 > + > +#define MASTER_SPDM 0 > +#define MASTER_BLSP_1 1 > +#define MASTER_BLSP_2 2 > +#define MASTER_XI_USB_HS1 3 > +#define MASTER_CRYPT0 4 > +#define MASTER_SDCC_1 5 > +#define MASTER_SDCC_2 6 > +#define MASTER_SNOC_PCNOC 7 > +#define MASTER_QPIC 8 > +#define PCNOC_INT_0 9 > +#define PCNOC_INT_2 10 > +#define PCNOC_INT_3 11 > +#define PCNOC_S_0 12 > +#define PCNOC_S_1 13 > +#define PCNOC_S_2 14 > +#define PCNOC_S_3 15 > +#define PCNOC_S_4 16 > +#define PCNOC_S_6 17 > +#define PCNOC_S_7 18 > +#define PCNOC_S_8 19 > +#define PCNOC_S_9 20 > +#define PCNOC_S_10 21 > +#define PCNOC_S_11 22 > +#define SLAVE_SPDM 23 > +#define SLAVE_PDM 24 > +#define SLAVE_PRNG 25 > +#define SLAVE_TCSR 26 > +#define SLAVE_SNOC_CFG 27 > +#define SLAVE_MESSAGE_RAM 28 > +#define SLAVE_DISP_SS_CFG 29 > +#define SLAVE_GPU_CFG 30 > +#define SLAVE_BLSP_1 31 > +#define SLAVE_BLSP_2 32 > +#define SLAVE_TLMM_NORTH 33 > +#define SLAVE_PCIE 34 > +#define SLAVE_ETHERNET 35 > +#define SLAVE_TLMM_EAST 36 > +#define SLAVE_TCU 37 > +#define SLAVE_PMIC_ARB 38 > +#define SLAVE_SDCC_1 39 > +#define SLAVE_SDCC_2 40 > +#define SLAVE_TLMM_SOUTH 41 > +#define SLAVE_USB_HS 42 > +#define SLAVE_USB3 43 > +#define SLAVE_CRYPTO_0_CFG 44 > +#define SLAVE_PCNOC_SNOC 45 > + > +#define MASTER_QDSS_BAM 0 > +#define MASTER_BIMC_SNOC 1 > +#define MASTER_PCNOC_SNOC 2 > +#define MASTER_QDSS_ETR 3 > +#define MASTER_EMAC 4 > +#define MASTER_PCIE 5 > +#define MASTER_USB3 6 > +#define QDSS_INT 7 > +#define SNOC_INT_0 8 > +#define SNOC_INT_1 9 > +#define SNOC_INT_2 10 > +#define SLAVE_KPSS_AHB 11 > +#define SLAVE_WCSS 12 > +#define SLAVE_SNOC_BIMC_1 13 > +#define SLAVE_IMEM 14 > +#define SLAVE_SNOC_PCNOC 15 > +#define SLAVE_QDSS_STM 16 > +#define SLAVE_CATS_0 17 > +#define SLAVE_CATS_1 18 > +#define SLAVE_LPASS 19 > + > +#endif
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt new file mode 100644 index 000000000000..14a827268dda --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt @@ -0,0 +1,46 @@ +Qualcomm QCS404 Network-On-Chip interconnect driver binding +----------------------------------------------------------- + +Required properties : +- compatible : shall contain only one of the following: + "qcom,qcs404-bimc" + "qcom,qcs404-pcnoc" + "qcom,qcs404-snoc" +- #interconnect-cells : should contain 1 + +Optional properties : +reg : specifies the physical base address and size of registers +clocks : list of phandles and specifiers to all interconnect bus clocks +clock-names : clock names should include both "bus_clk" and "bus_a_clk" + +Example: + +soc { + ... + bimc: interconnect@400000 { + reg = <0x00400000 0x80000>; + compatible = "qcom,qcs404-bimc"; + #interconnect-cells = <1>; + clock-names = "bus_clk", "bus_a_clk"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + pnoc: interconnect@500000 { + reg = <0x00500000 0x15080>; + compatible = "qcom,qcs404-pcnoc"; + #interconnect-cells = <1>; + clock-names = "bus_clk", "bus_a_clk"; + clocks = <&rpmcc RPM_SMD_PNOC_CLK>, + <&rpmcc RPM_SMD_PNOC_A_CLK>; + }; + + snoc: interconnect@580000 { + reg = <0x00580000 0x23080>; + compatible = "qcom,qcs404-snoc"; + #interconnect-cells = <1>; + clock-names = "bus_clk", "bus_a_clk"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; +}; diff --git a/include/dt-bindings/interconnect/qcom,qcs404.h b/include/dt-bindings/interconnect/qcom,qcs404.h new file mode 100644 index 000000000000..960f6e39c5f2 --- /dev/null +++ b/include/dt-bindings/interconnect/qcom,qcs404.h @@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Qualcomm interconnect IDs + * + * Copyright (c) 2019, Linaro Ltd. + * Author: Georgi Djakov <georgi.djakov@linaro.org> + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_QCS404_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_QCS404_H + +#define MASTER_AMPSS_M0 0 +#define MASTER_OXILI 1 +#define MASTER_MDP_PORT0 2 +#define MASTER_SNOC_BIMC_1 3 +#define MASTER_TCU_0 4 +#define SLAVE_EBI_CH0 5 +#define SLAVE_BIMC_SNOC 6 + +#define MASTER_SPDM 0 +#define MASTER_BLSP_1 1 +#define MASTER_BLSP_2 2 +#define MASTER_XI_USB_HS1 3 +#define MASTER_CRYPT0 4 +#define MASTER_SDCC_1 5 +#define MASTER_SDCC_2 6 +#define MASTER_SNOC_PCNOC 7 +#define MASTER_QPIC 8 +#define PCNOC_INT_0 9 +#define PCNOC_INT_2 10 +#define PCNOC_INT_3 11 +#define PCNOC_S_0 12 +#define PCNOC_S_1 13 +#define PCNOC_S_2 14 +#define PCNOC_S_3 15 +#define PCNOC_S_4 16 +#define PCNOC_S_6 17 +#define PCNOC_S_7 18 +#define PCNOC_S_8 19 +#define PCNOC_S_9 20 +#define PCNOC_S_10 21 +#define PCNOC_S_11 22 +#define SLAVE_SPDM 23 +#define SLAVE_PDM 24 +#define SLAVE_PRNG 25 +#define SLAVE_TCSR 26 +#define SLAVE_SNOC_CFG 27 +#define SLAVE_MESSAGE_RAM 28 +#define SLAVE_DISP_SS_CFG 29 +#define SLAVE_GPU_CFG 30 +#define SLAVE_BLSP_1 31 +#define SLAVE_BLSP_2 32 +#define SLAVE_TLMM_NORTH 33 +#define SLAVE_PCIE 34 +#define SLAVE_ETHERNET 35 +#define SLAVE_TLMM_EAST 36 +#define SLAVE_TCU 37 +#define SLAVE_PMIC_ARB 38 +#define SLAVE_SDCC_1 39 +#define SLAVE_SDCC_2 40 +#define SLAVE_TLMM_SOUTH 41 +#define SLAVE_USB_HS 42 +#define SLAVE_USB3 43 +#define SLAVE_CRYPTO_0_CFG 44 +#define SLAVE_PCNOC_SNOC 45 + +#define MASTER_QDSS_BAM 0 +#define MASTER_BIMC_SNOC 1 +#define MASTER_PCNOC_SNOC 2 +#define MASTER_QDSS_ETR 3 +#define MASTER_EMAC 4 +#define MASTER_PCIE 5 +#define MASTER_USB3 6 +#define QDSS_INT 7 +#define SNOC_INT_0 8 +#define SNOC_INT_1 9 +#define SNOC_INT_2 10 +#define SLAVE_KPSS_AHB 11 +#define SLAVE_WCSS 12 +#define SLAVE_SNOC_BIMC_1 13 +#define SLAVE_IMEM 14 +#define SLAVE_SNOC_PCNOC 15 +#define SLAVE_QDSS_STM 16 +#define SLAVE_CATS_0 17 +#define SLAVE_CATS_1 18 +#define SLAVE_LPASS 19 + +#endif