@@ -1519,6 +1519,72 @@ static int cs_etm__decode_data_block(struct cs_etm_queue *etmq)
return ret;
}
+static int cs_etm__process_decoder_queue(struct cs_etm_queue *etmq)
+{
+ int ret;
+
+ /* Process each packet in this chunk */
+ while (1) {
+ ret = cs_etm_decoder__get_packet(etmq->decoder,
+ etmq->packet);
+ if (ret <= 0)
+ /*
+ * Stop processing this chunk on
+ * end of data or error
+ */
+ break;
+
+ /*
+ * Since packet addresses are swapped in packet
+ * handling within below switch() statements,
+ * thus setting sample flags must be called
+ * prior to switch() statement to use address
+ * information before packets swapping.
+ */
+ ret = cs_etm__set_sample_flags(etmq);
+ if (ret < 0)
+ break;
+
+ switch (etmq->packet->sample_type) {
+ case CS_ETM_RANGE:
+ /*
+ * If the packet contains an instruction
+ * range, generate instruction sequence
+ * events.
+ */
+ cs_etm__sample(etmq);
+ break;
+ case CS_ETM_EXCEPTION:
+ case CS_ETM_EXCEPTION_RET:
+ /*
+ * If the exception packet is coming,
+ * make sure the previous instruction
+ * range packet to be handled properly.
+ */
+ cs_etm__exception(etmq);
+ break;
+ case CS_ETM_DISCONTINUITY:
+ /*
+ * Discontinuity in trace, flush
+ * previous branch stack
+ */
+ cs_etm__flush(etmq);
+ break;
+ case CS_ETM_EMPTY:
+ /*
+ * Should not receive empty packet,
+ * report error.
+ */
+ pr_err("CS ETM Trace: empty packet\n");
+ return -EINVAL;
+ default:
+ break;
+ }
+ }
+
+ return ret;
+}
+
static int cs_etm__run_decoder(struct cs_etm_queue *etmq)
{
int err = 0;
@@ -1544,64 +1610,13 @@ static int cs_etm__run_decoder(struct cs_etm_queue *etmq)
if (err)
return err;
- /* Process each packet in this chunk */
- while (1) {
- err = cs_etm_decoder__get_packet(etmq->decoder,
- etmq->packet);
- if (err <= 0)
- /*
- * Stop processing this chunk on
- * end of data or error
- */
- break;
+ /*
+ * Process each packet in this chunk, nothing to do if
+ * an error occurs other than hoping the next one will
+ * be better.
+ */
+ err = cs_etm__process_decoder_queue(etmq);
- /*
- * Since packet addresses are swapped in packet
- * handling within below switch() statements,
- * thus setting sample flags must be called
- * prior to switch() statement to use address
- * information before packets swapping.
- */
- err = cs_etm__set_sample_flags(etmq);
- if (err < 0)
- break;
-
- switch (etmq->packet->sample_type) {
- case CS_ETM_RANGE:
- /*
- * If the packet contains an instruction
- * range, generate instruction sequence
- * events.
- */
- cs_etm__sample(etmq);
- break;
- case CS_ETM_EXCEPTION:
- case CS_ETM_EXCEPTION_RET:
- /*
- * If the exception packet is coming,
- * make sure the previous instruction
- * range packet to be handled properly.
- */
- cs_etm__exception(etmq);
- break;
- case CS_ETM_DISCONTINUITY:
- /*
- * Discontinuity in trace, flush
- * previous branch stack
- */
- cs_etm__flush(etmq);
- break;
- case CS_ETM_EMPTY:
- /*
- * Should not receive empty packet,
- * report error.
- */
- pr_err("CS ETM Trace: empty packet\n");
- return -EINVAL;
- default:
- break;
- }
- }
} while (etmq->buf_len);
if (err == 0)
Making the main packet processing loop modular so that it can be called from different decoding context (timeless vs. non-timless), avoiding to repeat code. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> --- tools/perf/util/cs-etm.c | 129 ++++++++++++++++++++++----------------- 1 file changed, 72 insertions(+), 57 deletions(-) -- 2.17.1