diff mbox series

[15/15,v4] regulator: s2mps11: Hand over GPIO to regulator core

Message ID 20181206124351.10155-16-linus.walleij@linaro.org
State Accepted
Commit 2b96edb570709d6ca2e06842941c4bdf04b55f47
Headers show
Series Regulator ena_gpiod fixups | expand

Commit Message

Linus Walleij Dec. 6, 2018, 12:43 p.m. UTC 
The GPIO descriptors used by the S2MPS11 driver are retrieved
during probe() and it is really helpful to have those under
devres management because of all the errorpaths in the
intialization.

Using the new dev_gpiod_unhinge() call we can remove the
devres management of the descriptor right before handing
it over to the regulators core.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
ChangeLog v3->v4:
- Resending.
ChangeLog v2->v3:
- Resending.
ChangeLog v1->v2:
- New patch handling this drivers GPIO descriptors properly.
---
 drivers/regulator/s2mps11.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

-- 
2.19.2
diff mbox series

Patch

diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 63e66f485cc0..ee4a23ab0663 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -1178,7 +1178,12 @@  static int s2mps11_pmic_probe(struct platform_device *pdev)
 			config.of_node = rdata[i].of_node;
 		}
 		config.ena_gpiod = s2mps11->ext_control_gpiod[i];
-
+		/*
+		 * Hand the GPIO descriptor management over to the regulator
+		 * core, remove it from devres management.
+		 */
+		if (config.ena_gpiod)
+			devm_gpiod_unhinge(&pdev->dev, config.ena_gpiod);
 		regulator = devm_regulator_register(&pdev->dev,
 						&regulators[i], &config);
 		if (IS_ERR(regulator)) {