deleted file mode 100644
@@ -1,46 +0,0 @@
-* ARM Primecell Peripherals
-
-ARM, Ltd. Primecell peripherals have a standard id register that can be used to
-identify the peripheral type, vendor, and revision. This value can be used for
-driver matching.
-
-Required properties:
-
-- compatible : should be a specific name for the peripheral and
- "arm,primecell". The specific name will match the ARM
- engineering name for the logic block in the form: "arm,pl???"
-
-Optional properties:
-
-- arm,primecell-periphid : Value to override the h/w value with
-- clocks : From common clock binding. First clock is phandle to clock for apb
- pclk. Additional clocks are optional and specific to those peripherals.
-- clock-names : From common clock binding. Shall be "apb_pclk" for first clock.
-- dmas : From common DMA binding. If present, refers to one or more dma channels.
-- dma-names : From common DMA binding, needs to match the 'dmas' property.
- Devices with exactly one receive and transmit channel shall name
- these "rx" and "tx", respectively.
-- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
-- pinctrl-names : Names corresponding to the numbered pinctrl states
-- interrupts : one or more interrupt specifiers
-- interrupt-names : names corresponding to the interrupts properties
-
-Example:
-
-serial@fff36000 {
- compatible = "arm,pl011", "arm,primecell";
- arm,primecell-periphid = <0x00341011>;
-
- clocks = <&pclk>;
- clock-names = "apb_pclk";
-
- dmas = <&dma-controller 4>, <&dma-controller 5>;
- dma-names = "rx", "tx";
-
- pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
- pinctrl-1 = <&uart0_sleep_mode>;
- pinctrl-names = "default","sleep";
-
- interrupts = <0 11 0x4>;
-};
-
new file mode 100644
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/primecell.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Primecell Peripherals
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+description: |+
+ ARM, Ltd. Primecell peripherals have a standard id register that can be used to
+ identify the peripheral type, vendor, and revision. This value can be used for
+ driver matching.
+
+properties:
+ compatible:
+ contains:
+ const: arm,primecell
+ description:
+ Should be a specific name for the peripheral followed by "arm,primecell".
+ The specific name will match the ARM engineering name for the logic block
+ in the form "arm,pl???"
+
+ arm,primecell-periphid:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Value to override the h/w ID value
+ clocks:
+ minItems: 1
+ maxItems: 32
+ clock-names:
+ contains:
+ const: apb_pclk
+ additionalItems: true
+...
Convert ARM Primecell binding to DT schema format using json-schema. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> --- .../devicetree/bindings/arm/primecell.txt | 46 ------------------- .../devicetree/bindings/arm/primecell.yaml | 36 +++++++++++++++ 2 files changed, 36 insertions(+), 46 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/primecell.txt create mode 100644 Documentation/devicetree/bindings/arm/primecell.yaml -- 2.19.1