diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 5e366824814f..2e1e540f2e5a 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -18,6 +18,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/physmap.h>
 #include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
 #include <linux/gpio.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
@@ -175,6 +176,7 @@ static struct resource mx21ads_mmgpio_resource =
 	DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat");
 
 static struct bgpio_pdata mx21ads_mmgpio_pdata = {
+	.label	= "mx21ads-mmgpio",
 	.base	= MX21ADS_MMGPIO_BASE,
 	.ngpio	= 16,
 };
@@ -203,7 +205,6 @@ static struct regulator_init_data mx21ads_lcd_regulator_init_data = {
 static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = {
 	.supply_name	= "LCD",
 	.microvolts	= 3300000,
-	.gpio		= MX21ADS_IO_LCDON,
 	.enable_high	= 1,
 	.init_data	= &mx21ads_lcd_regulator_init_data,
 };
@@ -216,6 +217,14 @@ static struct platform_device mx21ads_lcd_regulator = {
 	},
 };
 
+static struct gpiod_lookup_table mx21ads_lcd_regulator_gpiod_table = {
+	.dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */
+	.table = {
+		GPIO_LOOKUP("mx21ads-mmgpio", 9, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 /*
  * Connected is a portrait Sharp-QVGA display
  * of type: LQ035Q7DB02
@@ -311,6 +320,7 @@ static void __init mx21ads_late_init(void)
 {
 	imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
 
+	gpiod_add_lookup_table(&mx21ads_lcd_regulator_gpiod_table);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	mx21ads_cs8900_resources[1].start =
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index a04bb094ded1..f5e04047ed13 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -16,6 +16,7 @@
 #include <linux/gpio/driver.h>
 /* Needed for gpio_to_irq() */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
@@ -230,10 +231,17 @@ static struct regulator_init_data mx27ads_lcd_regulator_init_data = {
 static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = {
 	.supply_name	= "LCD",
 	.microvolts	= 3300000,
-	.gpio		= MX27ADS_LCD_GPIO,
 	.init_data	= &mx27ads_lcd_regulator_init_data,
 };
 
+static struct gpiod_lookup_table mx27ads_lcd_regulator_gpiod_table = {
+	.dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */
+	.table = {
+		GPIO_LOOKUP("LCD", 0, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static void __init mx27ads_regulator_init(void)
 {
 	struct gpio_chip *vchip;
@@ -247,6 +255,8 @@ static void __init mx27ads_regulator_init(void)
 	vchip->set		= vgpio_set;
 	gpiochip_add_data(vchip, NULL);
 
+	gpiod_add_lookup_table(&mx27ads_lcd_regulator_gpiod_table);
+
 	platform_device_register_data(NULL, "reg-fixed-voltage",
 				      PLATFORM_DEVID_AUTO,
 				      &mx27ads_lcd_regulator_pdata,
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index d1613b954926..a04e249c654b 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -15,6 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio-pxa.h>
+#include <linux/gpio/machine.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/max8649.h>
 #include <linux/regulator/fixed.h>
@@ -148,7 +149,6 @@ static struct regulator_init_data brownstone_v_5vp_data = {
 static struct fixed_voltage_config brownstone_v_5vp = {
 	.supply_name		= "v_5vp",
 	.microvolts		= 5000000,
-	.gpio			= GPIO_5V_ENABLE,
 	.enable_high		= 1,
 	.enabled_at_boot	= 1,
 	.init_data		= &brownstone_v_5vp_data,
@@ -162,6 +162,15 @@ static struct platform_device brownstone_v_5vp_device = {
 	},
 };
 
+static struct gpiod_lookup_table brownstone_v_5vp_gpiod_table = {
+	.dev_id = "reg-fixed-voltage.1", /* .id set to 1 above */
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO_5V_ENABLE,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct max8925_platform_data brownstone_max8925_info = {
 	.irq_base		= MMP_NR_IRQS,
 };
@@ -217,6 +226,7 @@ static void __init brownstone_init(void)
 	mmp2_add_isram(&mmp2_isram_platdata);
 
 	/* enable 5v regulator */
+	gpiod_add_lookup_table(&brownstone_v_5vp_gpiod_table);
 	platform_device_register(&brownstone_v_5vp_device);
 }
 
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index dd28d2614d7f..d3785eaac592 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -300,7 +300,6 @@ static struct regulator_init_data modem_nreset_data = {
 static struct fixed_voltage_config modem_nreset_config = {
 	.supply_name		= "modem_nreset",
 	.microvolts		= 3300000,
-	.gpio			= AMS_DELTA_GPIO_PIN_MODEM_NRESET,
 	.startup_delay		= 25000,
 	.enable_high		= 1,
 	.enabled_at_boot	= 1,
@@ -315,6 +314,15 @@ static struct platform_device modem_nreset_device = {
 	},
 };
 
+static struct gpiod_lookup_table ams_delta_nreset_gpiod_table = {
+	.dev_id = "reg-fixed-voltage",
+	.table = {
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_MODEM_NRESET,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 struct modem_private_data {
 	struct regulator *regulator;
 };
@@ -602,6 +610,7 @@ static struct platform_device *ams_delta_devices[] __initdata = {
 };
 
 static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = {
+	&ams_delta_nreset_gpiod_table,
 	&ams_delta_audio_gpio_table,
 	&keybrd_pwr_gpio_table,
 	&ams_delta_lcd_gpio_table,
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 7f02743edbe4..d0f7a7cc70cb 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -10,6 +10,7 @@
 #include <linux/clk.h>
 #include <linux/davinci_emac.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
@@ -328,7 +329,6 @@ static struct regulator_init_data pandora_vmmc3 = {
 static struct fixed_voltage_config pandora_vwlan = {
 	.supply_name		= "vwlan",
 	.microvolts		= 1800000, /* 1.8V */
-	.gpio			= PANDORA_WIFI_NRESET_GPIO,
 	.startup_delay		= 50000, /* 50ms */
 	.enable_high		= 1,
 	.init_data		= &pandora_vmmc3,
@@ -342,6 +342,19 @@ static struct platform_device pandora_vwlan_device = {
 	},
 };
 
+static struct gpiod_lookup_table pandora_vwlan_gpiod_table = {
+	.dev_id = "reg-fixed-voltage.1",
+	.table = {
+		/*
+		 * As this is a low GPIO number it should be at the first
+		 * GPIO bank.
+		 */
+		GPIO_LOOKUP("gpio-0-31", PANDORA_WIFI_NRESET_GPIO,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static void pandora_wl1251_init_card(struct mmc_card *card)
 {
 	/*
@@ -403,6 +416,7 @@ static void __init pandora_wl1251_init(void)
 static void __init omap3_pandora_legacy_init(void)
 {
 	platform_device_register(&pandora_backlight);
+	gpiod_add_lookup_table(&pandora_vwlan_gpiod_table);
 	platform_device_register(&pandora_vwlan_device);
 	omap_hsmmc_init(pandora_mmc3);
 	omap_hsmmc_late_init(pandora_mmc3);
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 29be04c6cc48..b14c47a6ee6b 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -986,7 +986,6 @@ static struct fixed_voltage_config camera_dummy_config = {
 	.supply_name		= "camera_vdd",
 	.input_supply		= "vcc cam",
 	.microvolts		= 2800000,
-	.gpio			= -1,
 	.enable_high		= 0,
 	.init_data		= &camera_dummy_initdata,
 };
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 2c90b58f347d..565965e9acc7 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -21,6 +21,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds-lp3944.h>
 #include <linux/platform_data/i2c-pxa.h>
@@ -698,31 +699,39 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
 
 #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910)
 /* camera */
-static struct regulator_consumer_supply camera_dummy_supplies[] = {
+static struct regulator_consumer_supply camera_regulator_supplies[] = {
 	REGULATOR_SUPPLY("vdd", "0-005d"),
 };
 
-static struct regulator_init_data camera_dummy_initdata = {
-	.consumer_supplies = camera_dummy_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies),
+static struct regulator_init_data camera_regulator_initdata = {
+	.consumer_supplies = camera_regulator_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(camera_regulator_supplies),
 	.constraints = {
 		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 	},
 };
 
-static struct fixed_voltage_config camera_dummy_config = {
+static struct fixed_voltage_config camera_regulator_config = {
 	.supply_name		= "camera_vdd",
 	.microvolts		= 2800000,
-	.gpio			= GPIO50_nCAM_EN,
 	.enable_high		= 0,
-	.init_data		= &camera_dummy_initdata,
+	.init_data		= &camera_regulator_initdata,
 };
 
-static struct platform_device camera_supply_dummy_device = {
+static struct platform_device camera_supply_regulator_device = {
 	.name	= "reg-fixed-voltage",
 	.id	= 1,
 	.dev	= {
-		.platform_data = &camera_dummy_config,
+		.platform_data = &camera_regulator_config,
+	},
+};
+
+static struct gpiod_lookup_table camera_supply_gpiod_table = {
+	.dev_id = "reg-fixed-voltage.1",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO50_nCAM_EN,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
 	},
 };
 #endif
@@ -800,7 +809,7 @@ static struct i2c_board_info a780_i2c_board_info[] = {
 
 static struct platform_device *a780_devices[] __initdata = {
 	&a780_gpio_keys,
-	&camera_supply_dummy_device,
+	&camera_supply_regulator_device,
 };
 
 static void __init a780_init(void)
@@ -823,6 +832,7 @@ static void __init a780_init(void)
 	if (a780_camera_init() == 0)
 		pxa_set_camera_info(&a780_pxacamera_platform_data);
 
+	gpiod_add_lookup_table(&camera_supply_gpiod_table);
 	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
@@ -1098,7 +1108,7 @@ static struct i2c_board_info __initdata a910_i2c_board_info[] = {
 
 static struct platform_device *a910_devices[] __initdata = {
 	&a910_gpio_keys,
-	&camera_supply_dummy_device,
+	&camera_supply_regulator_device,
 };
 
 static void __init a910_init(void)
@@ -1121,6 +1131,7 @@ static void __init a910_init(void)
 	if (a910_camera_init() == 0)
 		pxa_set_camera_info(&a910_pxacamera_platform_data);
 
+	gpiod_add_lookup_table(&camera_supply_gpiod_table);
 	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index c5325d1ae77b..14c0f80bc9e7 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/mfd/htc-pasic3.h>
@@ -696,7 +697,6 @@ static struct regulator_init_data vads7846_regulator = {
 static struct fixed_voltage_config vads7846 = {
 	.supply_name	= "vads7846",
 	.microvolts	= 3300000, /* probably */
-	.gpio		= -EINVAL,
 	.startup_delay	= 0,
 	.init_data	= &vads7846_regulator,
 };
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 034345546f84..bd3c23ad6ce6 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -886,7 +886,6 @@ static struct regulator_init_data audio_va_initdata = {
 static struct fixed_voltage_config audio_va_config = {
 	.supply_name		= "audio_va",
 	.microvolts		= 5000000,
-	.gpio			= GPIO_AUDIO_VA_ENABLE,
 	.enable_high		= 1,
 	.enabled_at_boot	= 0,
 	.init_data		= &audio_va_initdata,
@@ -900,6 +899,15 @@ static struct platform_device audio_va_device = {
 	},
 };
 
+static struct gpiod_lookup_table audio_va_gpiod_table = {
+	.dev_id = "reg-fixed-voltage.0",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO_AUDIO_VA_ENABLE,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 /* Dummy supplies for Codec's VD/VLC */
 
 static struct regulator_consumer_supply audio_dummy_supplies[] = {
@@ -918,7 +926,6 @@ static struct regulator_init_data audio_dummy_initdata = {
 static struct fixed_voltage_config audio_dummy_config = {
 	.supply_name		= "audio_vd",
 	.microvolts		= 3300000,
-	.gpio			= -1,
 	.init_data		= &audio_dummy_initdata,
 };
 
@@ -1033,6 +1040,7 @@ static void __init raumfeld_audio_init(void)
 	else
 		gpio_direction_output(GPIO_MCLK_RESET, 1);
 
+	gpiod_add_lookup_table(&audio_va_gpiod_table);
 	platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices));
 }
 
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index e3851795d6d7..d53ea12fc766 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -17,6 +17,7 @@
 #include <linux/irq.h>
 #include <linux/pm.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/serial_8250.h>
 #include <linux/dm9000.h>
 #include <linux/mmc/host.h>
@@ -410,7 +411,6 @@ static struct regulator_init_data can_regulator_init_data = {
 static struct fixed_voltage_config can_regulator_pdata = {
 	.supply_name	= "CAN_SHDN",
 	.microvolts	= 3300000,
-	.gpio		= ZEUS_CAN_SHDN_GPIO,
 	.init_data	= &can_regulator_init_data,
 };
 
@@ -422,6 +422,15 @@ static struct platform_device can_regulator_device = {
 	},
 };
 
+static struct gpiod_lookup_table can_regulator_gpiod_table = {
+	.dev_id = "reg-fixed-voltage.0",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", ZEUS_CAN_SHDN_GPIO,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct mcp251x_platform_data zeus_mcp2515_pdata = {
 	.oscillator_frequency	= 16*1000*1000,
 };
@@ -538,7 +547,6 @@ static struct regulator_init_data zeus_ohci_regulator_data = {
 static struct fixed_voltage_config zeus_ohci_regulator_config = {
 	.supply_name		= "vbus2",
 	.microvolts		= 5000000, /* 5.0V */
-	.gpio			= ZEUS_USB2_PWREN_GPIO,
 	.enable_high		= 1,
 	.startup_delay		= 0,
 	.init_data		= &zeus_ohci_regulator_data,
@@ -552,6 +560,15 @@ static struct platform_device zeus_ohci_regulator_device = {
 	},
 };
 
+static struct gpiod_lookup_table zeus_ohci_regulator_gpiod_table = {
+	.dev_id = "reg-fixed-voltage.0",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", ZEUS_USB2_PWREN_GPIO,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct pxaohci_platform_data zeus_ohci_platform_data = {
 	.port_mode	= PMM_NPS_MODE,
 	/* Clear Power Control Polarity Low and set Power Sense
@@ -855,6 +872,8 @@ static void __init zeus_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
 
+	gpiod_add_lookup_table(&can_regulator_gpiod_table);
+	gpiod_add_lookup_table(&zeus_ohci_regulator_gpiod_table);
 	platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices));
 
 	zeus_register_ohci();
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index f04650297487..379424d72ae7 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -352,7 +352,6 @@ static struct fixed_voltage_config wallvdd_pdata = {
 	.supply_name = "WALLVDD",
 	.microvolts = 5000000,
 	.init_data = &wallvdd_data,
-	.gpio = -EINVAL,
 };
 
 static struct platform_device wallvdd_device = {
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index c46fa5dfd2e0..908e5aa831c8 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -222,7 +222,6 @@ static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
 	.supply_name = "B_PWR_5V",
 	.microvolts = 5000000,
 	.init_data = &smdk6410_b_pwr_5v_data,
-	.gpio = -EINVAL,
 };
 
 static struct platform_device smdk6410_b_pwr_5v = {
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 575ec085cffa..3e8c0948abcc 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -101,7 +101,7 @@ static int __init assabet_init_gpio(void __iomem *reg, u32 def_val)
 
 	assabet_bcr_gc = gc;
 
-	return gc->base;
+	return 0;
 }
 
 /*
@@ -471,6 +471,14 @@ static struct fixed_voltage_config assabet_cf_vcc_pdata __initdata = {
 	.enable_high = 1,
 };
 
+static struct gpiod_lookup_table assabet_cf_vcc_gpio_table = {
+	.dev_id = "reg-fixed-voltage.0",
+	.table = {
+		GPIO_LOOKUP("assabet", 0, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static void __init assabet_init(void)
 {
 	/*
@@ -517,9 +525,11 @@ static void __init assabet_init(void)
 			neponset_resources, ARRAY_SIZE(neponset_resources));
 #endif
 	} else {
+		gpiod_add_lookup_table(&assabet_cf_vcc_gpio_table);
 		sa11x0_register_fixed_regulator(0, &assabet_cf_vcc_pdata,
-					 assabet_cf_vcc_consumers,
-					 ARRAY_SIZE(assabet_cf_vcc_consumers));
+					assabet_cf_vcc_consumers,
+					ARRAY_SIZE(assabet_cf_vcc_consumers),
+					true);
 
 	}
 
@@ -802,7 +812,6 @@ fs_initcall(assabet_leds_init);
 
 void __init assabet_init_irq(void)
 {
-	unsigned int assabet_gpio_base;
 	u32 def_val;
 
 	sa1100_init_irq();
@@ -817,9 +826,7 @@ void __init assabet_init_irq(void)
 	 *
 	 * This must precede any driver calls to BCR_set() or BCR_clear().
 	 */
-	assabet_gpio_base = assabet_init_gpio((void *)&ASSABET_BCR, def_val);
-
-	assabet_cf_vcc_pdata.gpio = assabet_gpio_base + 0;
+	assabet_init_gpio((void *)&ASSABET_BCR, def_val);
 }
 
 MACHINE_START(ASSABET, "Intel-Assabet")
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 7167ddf84a0e..800321c6cbd8 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -348,7 +348,8 @@ void __init sa11x0_init_late(void)
 
 int __init sa11x0_register_fixed_regulator(int n,
 	struct fixed_voltage_config *cfg,
-	struct regulator_consumer_supply *supplies, unsigned num_supplies)
+	struct regulator_consumer_supply *supplies, unsigned num_supplies,
+	bool uses_gpio)
 {
 	struct regulator_init_data *id;
 
@@ -356,7 +357,7 @@ int __init sa11x0_register_fixed_regulator(int n,
 	if (!cfg->init_data)
 		return -ENOMEM;
 
-	if (cfg->gpio < 0)
+	if (!uses_gpio)
 		id->constraints.always_on = 1;
 	id->constraints.name = cfg->supply_name;
 	id->constraints.min_uV = cfg->microvolts;
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 5f3cb52fa6ab..158a4fd5ca24 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -54,4 +54,5 @@ void sa11x0_register_pcmcia(int socket, struct gpiod_lookup_table *);
 struct fixed_voltage_config;
 struct regulator_consumer_supply;
 int sa11x0_register_fixed_regulator(int n, struct fixed_voltage_config *cfg,
-	struct regulator_consumer_supply *supplies, unsigned num_supplies);
+	struct regulator_consumer_supply *supplies, unsigned num_supplies,
+	bool uses_gpio);
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 22f7fe0b809f..5bc82e2671c6 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -102,14 +102,14 @@ static struct fixed_voltage_config shannon_cf_vcc_pdata __initdata = {
 	.supply_name = "cf-power",
 	.microvolts = 3300000,
 	.enabled_at_boot = 1,
-	.gpio = -EINVAL,
 };
 
 static void __init shannon_init(void)
 {
 	sa11x0_register_fixed_regulator(0, &shannon_cf_vcc_pdata,
 					shannon_cf_vcc_consumers,
-					ARRAY_SIZE(shannon_cf_vcc_consumers));
+					ARRAY_SIZE(shannon_cf_vcc_consumers),
+					false);
 	sa11x0_register_pcmcia(0, &shannon_pcmcia0_gpio_table);
 	sa11x0_register_pcmcia(1, &shannon_pcmcia1_gpio_table);
 	sa11x0_ppc_configure_mcp();
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index adc61d14172c..8e00fd2d5b00 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -633,7 +633,6 @@ static struct regulator_init_data cn12_power_init_data = {
 static struct fixed_voltage_config cn12_power_info = {
 	.supply_name = "CN12 SD/MMC Vdd",
 	.microvolts = 3300000,
-	.gpio = GPIO_PTB7,
 	.enable_high = 1,
 	.init_data = &cn12_power_init_data,
 };
@@ -646,6 +645,16 @@ static struct platform_device cn12_power = {
 	},
 };
 
+static struct gpiod_lookup_table cn12_power_gpiod_table = {
+	.dev_id = "reg-fixed-voltage.0",
+	.table = {
+		/* Offset 7 on port B */
+		GPIO_LOOKUP("sh7724_pfc", GPIO_PTB7,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
 /* SDHI0 */
 static struct regulator_consumer_supply sdhi0_power_consumers[] =
@@ -665,7 +674,6 @@ static struct regulator_init_data sdhi0_power_init_data = {
 static struct fixed_voltage_config sdhi0_power_info = {
 	.supply_name = "CN11 SD/MMC Vdd",
 	.microvolts = 3300000,
-	.gpio = GPIO_PTB6,
 	.enable_high = 1,
 	.init_data = &sdhi0_power_init_data,
 };
@@ -678,6 +686,16 @@ static struct platform_device sdhi0_power = {
 	},
 };
 
+static struct gpiod_lookup_table sdhi0_power_gpiod_table = {
+	.dev_id = "reg-fixed-voltage.1",
+	.table = {
+		/* Offset 6 on port B */
+		GPIO_LOOKUP("sh7724_pfc", GPIO_PTB6,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct tmio_mmc_data sdhi0_info = {
 	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
 	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
@@ -1413,6 +1431,9 @@ static int __init arch_setup(void)
 				    DMA_MEMORY_EXCLUSIVE);
 	platform_device_add(ecovec_ceu_devices[1]);
 
+	gpiod_add_lookup_table(&cn12_power_gpiod_table);
+	gpiod_add_lookup_table(&sdhi0_power_gpiod_table);
+
 	return platform_add_devices(ecovec_devices,
 				    ARRAY_SIZE(ecovec_devices));
 }
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
index 4392c15ed9e0..dbfc5cf2aa93 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
@@ -10,7 +10,7 @@
  * of the License.
  */
 
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -43,7 +43,6 @@ static struct fixed_voltage_config bcm43xx_vmmc = {
 	 * real voltage and signaling are still 1.8V.
 	 */
 	.microvolts		= 2000000,		/* 1.8V */
-	.gpio			= -EINVAL,
 	.startup_delay		= 250 * 1000,		/* 250ms */
 	.enable_high		= 1,			/* active high */
 	.enabled_at_boot	= 0,			/* disabled at boot */
@@ -58,11 +57,23 @@ static struct platform_device bcm43xx_vmmc_regulator = {
 	},
 };
 
+static struct gpiod_lookup_table bcm43xx_vmmc_gpio_table = {
+	.dev_id	= "reg-fixed-voltage.0",
+	.table	= {
+		GPIO_LOOKUP("0000:00:0c.0", -1, NULL, GPIO_ACTIVE_LOW),
+		{}
+	},
+};
+
 static int __init bcm43xx_regulator_register(void)
 {
+	struct gpiod_lookup_table *table = &bcm43xx_vmmc_gpio_table;
+	struct gpiod_lookup *lookup = table->table;
 	int ret;
 
-	bcm43xx_vmmc.gpio = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME);
+	lookup[0].chip_hwnum = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME);
+	gpiod_add_lookup_table(table);
+
 	ret = platform_device_register(&bcm43xx_vmmc_regulator);
 	if (ret) {
 		pr_err("%s: vmmc regulator register failed\n", __func__);
diff --git a/drivers/regulator/fixed-helper.c b/drivers/regulator/fixed-helper.c
index 777fac6fb4cb..2c6098e6f4bc 100644
--- a/drivers/regulator/fixed-helper.c
+++ b/drivers/regulator/fixed-helper.c
@@ -43,7 +43,6 @@ struct platform_device *regulator_register_always_on(int id, const char *name,
 	}
 
 	data->cfg.microvolts = uv;
-	data->cfg.gpio = -EINVAL;
 	data->cfg.enabled_at_boot = 1;
 	data->cfg.init_data = &data->init_data;
 
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 988a7472c2ab..1142f195529b 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -24,10 +24,9 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/fixed.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regulator/machine.h>
 
@@ -78,10 +77,6 @@ of_get_fixed_voltage_config(struct device *dev,
 	if (init_data->constraints.boot_on)
 		config->enabled_at_boot = true;
 
-	config->gpio = of_get_named_gpio(np, "gpio", 0);
-	if ((config->gpio < 0) && (config->gpio != -ENOENT))
-		return ERR_PTR(config->gpio);
-
 	of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
 
 	config->enable_high = of_property_read_bool(np, "enable-active-high");
@@ -102,6 +97,7 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 	struct fixed_voltage_config *config;
 	struct fixed_voltage_data *drvdata;
 	struct regulator_config cfg = { };
+	enum gpiod_flags gflags;
 	int ret;
 
 	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
@@ -150,25 +146,28 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 
 	drvdata->desc.fixed_uV = config->microvolts;
 
-	if (gpio_is_valid(config->gpio)) {
-		cfg.ena_gpio = config->gpio;
-		if (pdev->dev.of_node)
-			cfg.ena_gpio_initialized = true;
-	}
 	cfg.ena_gpio_invert = !config->enable_high;
 	if (config->enabled_at_boot) {
 		if (config->enable_high)
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+			gflags = GPIOD_OUT_HIGH;
 		else
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
+			gflags = GPIOD_OUT_LOW;
 	} else {
 		if (config->enable_high)
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
+			gflags = GPIOD_OUT_LOW;
 		else
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+			gflags = GPIOD_OUT_HIGH;
 	}
-	if (config->gpio_is_open_drain)
-		cfg.ena_gpio_flags |= GPIOF_OPEN_DRAIN;
+	if (config->gpio_is_open_drain) {
+		if (gflags == GPIOD_OUT_HIGH)
+			gflags = GPIOD_OUT_HIGH_OPEN_DRAIN;
+		else
+			gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
+	}
+
+	cfg.ena_gpiod = devm_gpiod_get_optional(&pdev->dev, NULL, gflags);
+	if (IS_ERR(cfg.ena_gpiod))
+		return PTR_ERR(cfg.ena_gpiod);
 
 	cfg.dev = &pdev->dev;
 	cfg.init_data = config->init_data;
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
index 48918be649d4..1a4340ed8e2b 100644
--- a/include/linux/regulator/fixed.h
+++ b/include/linux/regulator/fixed.h
@@ -24,8 +24,6 @@ struct regulator_init_data;
  * @supply_name:	Name of the regulator supply
  * @input_supply:	Name of the input regulator supply
  * @microvolts:		Output voltage of regulator
- * @gpio:		GPIO to use for enable control
- * 			set to -EINVAL if not used
  * @startup_delay:	Start-up time in microseconds
  * @gpio_is_open_drain: Gpio pin is open drain or normal type.
  *			If it is open drain type then HIGH will be set
@@ -49,7 +47,6 @@ struct fixed_voltage_config {
 	const char *supply_name;
 	const char *input_supply;
 	int microvolts;
-	int gpio;
 	unsigned startup_delay;
 	unsigned gpio_is_open_drain:1;
 	unsigned enable_high:1;
