| Message ID | 20171003065540.11722-5-joel@jms.id.au |
|---|---|
| State | Superseded |
| Headers | show |
| Series | clk: Add Aspeed clock driver | expand |
On Tue, 2017-10-03 at 17:25 +1030, Joel Stanley wrote: > The majority of the clocks in the system are gates paired with a reset > controller that holds the IP in reset. > > This borrows from clk_hw_register_gate, but registers two 'gates', one > to control the clock enable register and the other to control the reset > IP. This allows us to enforce the ordering: > > 1. Place IP in reset > 2. Enable clock > 3. Delay > 4. Release reset > > There are some gates that do not have an associated reset; these are > handled by using -1 as the index for the reset. > > Signed-off-by: Joel Stanley <joel@jms.id.au> > > --- > v4: > - Drop useless 'disable clock' comment > - Drop CLK_IS_BASIC flag > - Fix 'there are a number of clocks...' comment > - Pass device to clk registration functions > - Check for errors when registering clk_hws > v3: > - Remove gates offset as gates are now at the start of the list > --- > drivers/clk/clk-aspeed.c | 130 +++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 130 insertions(+) > > diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c > index adb295292189..a424b056e767 100644 > --- a/drivers/clk/clk-aspeed.c > +++ b/drivers/clk/clk-aspeed.c > @@ -228,6 +228,107 @@ static const struct aspeed_clk_soc_data ast2400_data = { > .calc_pll = aspeed_ast2400_calc_pll, > }; > > +static int aspeed_clk_enable(struct clk_hw *hw) > +{ > + struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); > + unsigned long flags; > + u32 clk = BIT(gate->clock_idx); > + u32 rst = BIT(gate->reset_idx); > + > + spin_lock_irqsave(gate->lock, flags); > + > + if (gate->reset_idx >= 0) { > + /* Put IP in reset */ > + regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, rst); > + > + /* Delay 100us */ > + udelay(100); > + } > + > + /* Enable clock */ > + regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, 0); > + > + if (gate->reset_idx >= 0) { > + /* Delay 10ms */ > + /* TODO: can we sleep here? */ > + msleep(10); > + > + /* Take IP out of reset */ > + regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, 0); > + } > + > + spin_unlock_irqrestore(gate->lock, flags); > + > + return 0; > +} > + > +static void aspeed_clk_disable(struct clk_hw *hw) > +{ > + struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); > + unsigned long flags; > + u32 clk = BIT(gate->clock_idx); > + > + spin_lock_irqsave(gate->lock, flags); > + > + regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, clk); > + > + spin_unlock_irqrestore(gate->lock, flags); > +} > + > +static int aspeed_clk_is_enabled(struct clk_hw *hw) > +{ > + struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); > + u32 clk = BIT(gate->clock_idx); > + u32 reg; > + > + regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, ®); > + > + return (reg & clk) ? 0 : 1; Kill a branch, save the internet: return !(reg & clk); But regardless, the patch seems sensible to me modulo the power domain discussion. However as it's more clk-y than Aspeed-y I don't feel entirely qualified to provide a r-b, so instead: Acked-by: Andrew Jeffery <andrew@aj.id.au> > +} > + > +static const struct clk_ops aspeed_clk_gate_ops = { > + .enable = aspeed_clk_enable, > + .disable = aspeed_clk_disable, > + .is_enabled = aspeed_clk_is_enabled, > +}; > + > +static struct clk_hw *aspeed_clk_hw_register_gate(struct device *dev, > + const char *name, const char *parent_name, unsigned long flags, > + struct regmap *map, u8 clock_idx, u8 reset_idx, > + u8 clk_gate_flags, spinlock_t *lock) > +{ > + struct aspeed_clk_gate *gate; > + struct clk_init_data init; > + struct clk_hw *hw; > + int ret; > + > + gate = kzalloc(sizeof(*gate), GFP_KERNEL); > + if (!gate) > + return ERR_PTR(-ENOMEM); > + > + init.name = name; > + init.ops = &aspeed_clk_gate_ops; > + init.flags = flags; > + init.parent_names = parent_name ? &parent_name : NULL; > + init.num_parents = parent_name ? 1 : 0; > + > + gate->map = map; > + gate->clock_idx = clock_idx; > + gate->reset_idx = reset_idx; > + gate->flags = clk_gate_flags; > + gate->lock = lock; > + gate->hw.init = &init; > + > + hw = &gate->hw; > + ret = clk_hw_register(dev, hw); > + if (ret) { > + kfree(gate); > + hw = ERR_PTR(ret); > + } > + > + return hw; > +} > + > static int aspeed_clk_probe(struct platform_device *pdev) > { > const struct aspeed_clk_soc_data *soc_data; > @@ -235,6 +336,7 @@ static int aspeed_clk_probe(struct platform_device *pdev) > struct regmap *map; > struct clk_hw *hw; > u32 val, rate; > + int i; > > map = syscon_node_to_regmap(dev->of_node); > if (IS_ERR(map)) { > @@ -323,6 +425,34 @@ static int aspeed_clk_probe(struct platform_device *pdev) > return PTR_ERR(hw); > aspeed_clk_data->hws[ASPEED_CLK_BCLK] = hw; > > + /* > + * TODO: There are a number of clocks that not included in this driver > + * as more information is required: > + * D2-PLL > + * D-PLL > + * YCLK > + * RGMII > + * RMII > + * UART[1..5] clock source mux > + */ > + > + for (i = 0; i < ARRAY_SIZE(aspeed_gates); i++) { > + const struct aspeed_gate_data *gd = &aspeed_gates[i]; > + > + hw = aspeed_clk_hw_register_gate(dev, > + gd->name, > + gd->parent_name, > + gd->flags, > + map, > + gd->clock_idx, > + gd->reset_idx, > + CLK_GATE_SET_TO_DISABLE, > + &aspeed_clk_lock); > + if (IS_ERR(hw)) > + return PTR_ERR(hw); > + aspeed_clk_data->hws[i] = hw; > + } > + > return 0; > }; >
diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c index adb295292189..a424b056e767 100644 --- a/drivers/clk/clk-aspeed.c +++ b/drivers/clk/clk-aspeed.c @@ -228,6 +228,107 @@ static const struct aspeed_clk_soc_data ast2400_data = { .calc_pll = aspeed_ast2400_calc_pll, }; +static int aspeed_clk_enable(struct clk_hw *hw) +{ + struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); + unsigned long flags; + u32 clk = BIT(gate->clock_idx); + u32 rst = BIT(gate->reset_idx); + + spin_lock_irqsave(gate->lock, flags); + + if (gate->reset_idx >= 0) { + /* Put IP in reset */ + regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, rst); + + /* Delay 100us */ + udelay(100); + } + + /* Enable clock */ + regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, 0); + + if (gate->reset_idx >= 0) { + /* Delay 10ms */ + /* TODO: can we sleep here? */ + msleep(10); + + /* Take IP out of reset */ + regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, 0); + } + + spin_unlock_irqrestore(gate->lock, flags); + + return 0; +} + +static void aspeed_clk_disable(struct clk_hw *hw) +{ + struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); + unsigned long flags; + u32 clk = BIT(gate->clock_idx); + + spin_lock_irqsave(gate->lock, flags); + + regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, clk); + + spin_unlock_irqrestore(gate->lock, flags); +} + +static int aspeed_clk_is_enabled(struct clk_hw *hw) +{ + struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); + u32 clk = BIT(gate->clock_idx); + u32 reg; + + regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, ®); + + return (reg & clk) ? 0 : 1; +} + +static const struct clk_ops aspeed_clk_gate_ops = { + .enable = aspeed_clk_enable, + .disable = aspeed_clk_disable, + .is_enabled = aspeed_clk_is_enabled, +}; + +static struct clk_hw *aspeed_clk_hw_register_gate(struct device *dev, + const char *name, const char *parent_name, unsigned long flags, + struct regmap *map, u8 clock_idx, u8 reset_idx, + u8 clk_gate_flags, spinlock_t *lock) +{ + struct aspeed_clk_gate *gate; + struct clk_init_data init; + struct clk_hw *hw; + int ret; + + gate = kzalloc(sizeof(*gate), GFP_KERNEL); + if (!gate) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &aspeed_clk_gate_ops; + init.flags = flags; + init.parent_names = parent_name ? &parent_name : NULL; + init.num_parents = parent_name ? 1 : 0; + + gate->map = map; + gate->clock_idx = clock_idx; + gate->reset_idx = reset_idx; + gate->flags = clk_gate_flags; + gate->lock = lock; + gate->hw.init = &init; + + hw = &gate->hw; + ret = clk_hw_register(dev, hw); + if (ret) { + kfree(gate); + hw = ERR_PTR(ret); + } + + return hw; +} + static int aspeed_clk_probe(struct platform_device *pdev) { const struct aspeed_clk_soc_data *soc_data; @@ -235,6 +336,7 @@ static int aspeed_clk_probe(struct platform_device *pdev) struct regmap *map; struct clk_hw *hw; u32 val, rate; + int i; map = syscon_node_to_regmap(dev->of_node); if (IS_ERR(map)) { @@ -323,6 +425,34 @@ static int aspeed_clk_probe(struct platform_device *pdev) return PTR_ERR(hw); aspeed_clk_data->hws[ASPEED_CLK_BCLK] = hw; + /* + * TODO: There are a number of clocks that not included in this driver + * as more information is required: + * D2-PLL + * D-PLL + * YCLK + * RGMII + * RMII + * UART[1..5] clock source mux + */ + + for (i = 0; i < ARRAY_SIZE(aspeed_gates); i++) { + const struct aspeed_gate_data *gd = &aspeed_gates[i]; + + hw = aspeed_clk_hw_register_gate(dev, + gd->name, + gd->parent_name, + gd->flags, + map, + gd->clock_idx, + gd->reset_idx, + CLK_GATE_SET_TO_DISABLE, + &aspeed_clk_lock); + if (IS_ERR(hw)) + return PTR_ERR(hw); + aspeed_clk_data->hws[i] = hw; + } + return 0; };
The majority of the clocks in the system are gates paired with a reset controller that holds the IP in reset. This borrows from clk_hw_register_gate, but registers two 'gates', one to control the clock enable register and the other to control the reset IP. This allows us to enforce the ordering: 1. Place IP in reset 2. Enable clock 3. Delay 4. Release reset There are some gates that do not have an associated reset; these are handled by using -1 as the index for the reset. Signed-off-by: Joel Stanley <joel@jms.id.au> --- v4: - Drop useless 'disable clock' comment - Drop CLK_IS_BASIC flag - Fix 'there are a number of clocks...' comment - Pass device to clk registration functions - Check for errors when registering clk_hws v3: - Remove gates offset as gates are now at the start of the list --- drivers/clk/clk-aspeed.c | 130 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 130 insertions(+) -- 2.14.1