@@ -1182,14 +1182,25 @@ static void sdhci_finish_command(struct sdhci_host *host)
if (cmd->flags & MMC_RSP_PRESENT) {
if (cmd->flags & MMC_RSP_136) {
- /* CRC is stripped so we need to do some shifting. */
- for (i = 0;i < 4;i++) {
- cmd->resp[i] = sdhci_readl(host,
- SDHCI_RESPONSE + (3-i)*4) << 8;
- if (i != 3)
- cmd->resp[i] |=
- sdhci_readb(host,
- SDHCI_RESPONSE + (3-i)*4-1);
+ if (!(host->quirks2 & SDHCI_QUIRK2_NO_CRC_STRIPPING)) {
+ /*
+ * CRC is stripped so we need to do some
+ * shifting.
+ */
+ for (i = 0; i < 4; i++) {
+ cmd->resp[i] =
+ sdhci_readl(host, SDHCI_RESPONSE
+ + (3 - i) * 4) << 8;
+ if (i != 3)
+ cmd->resp[i] |=
+ sdhci_readb(host, SDHCI_RESPONSE
+ + (3 - i) * 4 - 1);
+ }
+ } else {
+ for (i = 0; i < 4; i++)
+ cmd->resp[i] =
+ sdhci_readl(host, SDHCI_RESPONSE +
+ (3 - i) * 4);
}
} else {
cmd->resp[0] = sdhci_readl(host, SDHCI_RESPONSE);
@@ -435,6 +435,8 @@ struct sdhci_host {
#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14)
/* Broken Clock divider zero in controller */
#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15)
+/* Controller does not have CRC stripped in Command Response */
+#define SDHCI_QUIRK2_NO_CRC_STRIPPING (1<<16)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
TI's implementation of sdhci controller used in DRA7 SoC's doesn't strip CRC in responses with length 136 bits. Add quirk to indicate the controller does not strip CRC in MMC_RSP_136. If this quirk is set sdhci library shouldn't shift the response present in SDHCI_RESPONSE register. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- drivers/mmc/host/sdhci.c | 27 +++++++++++++++++++-------- drivers/mmc/host/sdhci.h | 2 ++ 2 files changed, 21 insertions(+), 8 deletions(-) -- 2.11.0