From patchwork Mon Apr 10 13:18:19 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 97146 Delivered-To: patch@linaro.org Received: by 10.182.246.10 with SMTP id xs10csp1353053obc; Mon, 10 Apr 2017 06:21:20 -0700 (PDT) X-Received: by 10.99.61.201 with SMTP id k192mr56356244pga.68.1491830480723; Mon, 10 Apr 2017 06:21:20 -0700 (PDT) Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id 3si9663710ple.80.2017.04.10.06.21.20; Mon, 10 Apr 2017 06:21:20 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=ti.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753978AbdDJNTY (ORCPT + 24 others); Mon, 10 Apr 2017 09:19:24 -0400 Received: from lelnx194.ext.ti.com ([198.47.27.80]:57581 "EHLO lelnx194.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753547AbdDJNTO (ORCPT ); Mon, 10 Apr 2017 09:19:14 -0400 Received: from dlelxv90.itg.ti.com ([172.17.2.17]) by lelnx194.ext.ti.com (8.15.1/8.15.1) with ESMTP id v3ADJ8VO000996; Mon, 10 Apr 2017 08:19:08 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ti.com; s=ti-com-17Q1; t=1491830348; bh=zvX8D97erWlqwF5RcCniwK6LynYcSveQk8ZcEBUevxw=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=qwq10QhZv+wrsozxehy7skl1Z4lhp5zzcO04NjXVxK1y4lWgW2ECGGlVj0VLS9uBt nrdZemXcmc8maKTB5MeZMUeH1Cvhz+UPcFf85nquVTF8E5RjOQX+WKH7DD6NbNK6hf FgegjJiWXGxUW1SNuCU57y3eqhIpkcRU2a7w4Jic= Received: from DFLE72.ent.ti.com (dfle72.ent.ti.com [128.247.5.109]) by dlelxv90.itg.ti.com (8.14.3/8.13.8) with ESMTP id v3ADJ8Go027805; Mon, 10 Apr 2017 08:19:08 -0500 Received: from dflp33.itg.ti.com (10.64.6.16) by DFLE72.ent.ti.com (128.247.5.109) with Microsoft SMTP Server id 14.3.294.0; Mon, 10 Apr 2017 08:19:08 -0500 Received: from a0393678ub.india.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by dflp33.itg.ti.com (8.14.3/8.13.8) with ESMTP id v3ADIOMM032573; Mon, 10 Apr 2017 08:19:07 -0500 From: Kishon Vijay Abraham I To: CC: , Subject: [PATCH 28/32] dt-bindings: phy: Add support for QMP phy Date: Mon, 10 Apr 2017 18:48:19 +0530 Message-ID: <20170410131823.26485-29-kishon@ti.com> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170410131823.26485-1-kishon@ti.com> References: <20170410131823.26485-1-kishon@ti.com> MIME-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Vivek Gautam Qualcomm chipsets have QMP phy controller that provides support to a number of controller, viz. PCIe, UFS, and USB. Adding dt binding information for the same. Signed-off-by: Vivek Gautam Reviewed-by: Stephen Boyd Acked-by: Rob Herring Signed-off-by: Kishon Vijay Abraham I --- .../devicetree/bindings/phy/qcom-qmp-phy.txt | 106 +++++++++++++++++++++ 1 file changed, 106 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt -- 2.11.0 diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt new file mode 100644 index 000000000000..e11c563a65ec --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -0,0 +1,106 @@ +Qualcomm QMP PHY controller +=========================== + +QMP phy controller supports physical layer functionality for a number of +controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. + +Required properties: + - compatible: compatible list, contains: + "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, + "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996. + + - reg: offset and length of register set for PHY's common serdes block. + + - #clock-cells: must be 1 + - Phy pll outputs a bunch of clocks for Tx, Rx and Pipe + interface (for pipe based PHYs). These clock are then gate-controlled + by gcc. + - #address-cells: must be 1 + - #size-cells: must be 1 + - ranges: must be present + + - clocks: a list of phandles and clock-specifier pairs, + one for each entry in clock-names. + - clock-names: "cfg_ahb" for phy config clock, + "aux" for phy aux clock, + "ref" for 19.2 MHz ref clk, + For "qcom,msm8996-qmp-pcie-phy" must contain: + "aux", "cfg_ahb", "ref". + For "qcom,msm8996-qmp-usb3-phy" must contain: + "aux", "cfg_ahb", "ref". + + - resets: a list of phandles and reset controller specifier pairs, + one for each entry in reset-names. + - reset-names: "phy" for reset of phy block, + "common" for phy common block reset, + "cfg" for phy's ahb cfg block reset (Optional). + For "qcom,msm8996-qmp-pcie-phy" must contain: + "phy", "common", "cfg". + For "qcom,msm8996-qmp-usb3-phy" must contain + "phy", "common". + + - vdda-phy-supply: Phandle to a regulator supply to PHY core block. + - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. + +Optional properties: + - vddp-ref-clk-supply: Phandle to a regulator supply to any specific refclk + pll block. + +Required nodes: + - Each device node of QMP phy is required to have as many child nodes as + the number of lanes the PHY has. + +Required properties for child node: + - reg: list of offset and length pairs of register sets for PHY blocks - + tx, rx and pcs. + + - #phy-cells: must be 0 + + - clocks: a list of phandles and clock-specifier pairs, + one for each entry in clock-names. + - clock-names: Must contain following for pcie and usb qmp phys: + "pipe" for pipe clock specific to each lane. + + - resets: a list of phandles and reset controller specifier pairs, + one for each entry in reset-names. + - reset-names: Must contain following for pcie qmp phys: + "lane" for reset specific to each lane. + +Example: + phy@34000 { + compatible = "qcom,msm8996-qmp-pcie-phy"; + reg = <0x34000 0x488>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; + + resets = <&gcc GCC_PCIE_PHY_BCR>, + <&gcc GCC_PCIE_PHY_COM_BCR>, + <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; + reset-names = "phy", "common", "cfg"; + + pciephy_0: lane@35000 { + reg = <0x35000 0x130>, + <0x35200 0x200>, + <0x35400 0x1dc>; + #phy-cells = <0>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "lane0"; + }; + + pciephy_1: lane@36000 { + ... + ... + };