diff mbox series

[12/32] phy: exynos: Use one define for enable bit

Message ID 20170410131823.26485-13-kishon@ti.com
State Accepted
Commit 7a66647b25b68c2a2da51bc9845fc91dd27529a9
Headers show
Series [01/32] mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header | expand

Commit Message

Kishon Vijay Abraham I April 10, 2017, 1:18 p.m. UTC 
From: Krzysztof Kozlowski <krzk@kernel.org>


There is no need for separate defines for Exynos4 and Exynos5 phy enable
bit and MIPI phy reset bits.  In both cases there are the same so
simplify it.

This reduces number of defines and allows removal of one header file.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Acked-by: Lee Jones <lee.jones@linaro.org>

Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

---
 drivers/phy/phy-exynos-dp-video.c           |  5 ++--
 drivers/phy/phy-exynos-mipi-video.c         | 39 ++++++++++++++---------------
 drivers/phy/phy-exynos5-usbdrd.c            |  5 ++--
 include/linux/soc/samsung/exynos-regs-pmu.h |  3 ++-
 4 files changed, 25 insertions(+), 27 deletions(-)

-- 
2.11.0
diff mbox series

Patch

diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
index d72193188980..bb3279dbf88c 100644
--- a/drivers/phy/phy-exynos-dp-video.c
+++ b/drivers/phy/phy-exynos-dp-video.c
@@ -14,7 +14,6 @@ 
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/exynos5-pmu.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/phy/phy.h>
@@ -37,7 +36,7 @@  static int exynos_dp_video_phy_power_on(struct phy *phy)
 
 	/* Disable power isolation on DP-PHY */
 	return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset,
-				  EXYNOS5_PHY_ENABLE, EXYNOS5_PHY_ENABLE);
+				  EXYNOS4_PHY_ENABLE, EXYNOS4_PHY_ENABLE);
 }
 
 static int exynos_dp_video_phy_power_off(struct phy *phy)
@@ -46,7 +45,7 @@  static int exynos_dp_video_phy_power_off(struct phy *phy)
 
 	/* Enable power isolation on DP-PHY */
 	return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset,
-				  EXYNOS5_PHY_ENABLE, 0);
+				  EXYNOS4_PHY_ENABLE, 0);
 }
 
 static const struct phy_ops exynos_dp_video_phy_ops = {
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
index acef1d92691e..c198886f80a3 100644
--- a/drivers/phy/phy-exynos-mipi-video.c
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -12,7 +12,6 @@ 
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
-#include <linux/mfd/syscon/exynos5-pmu.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -64,7 +63,7 @@  static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
 		{
 			/* EXYNOS_MIPI_PHY_ID_CSIS0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
-			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
@@ -73,7 +72,7 @@  static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
-			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
@@ -82,7 +81,7 @@  static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_CSIS1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
-			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
@@ -91,7 +90,7 @@  static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
-			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
@@ -109,46 +108,46 @@  static const struct mipi_phy_device_desc exynos5420_mipi_phy = {
 		{
 			/* EXYNOS_MIPI_PHY_ID_CSIS0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
-			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
+			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
 			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
-			.resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
+			.resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
 			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_CSIS1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
-			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
+			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
 			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
-			.resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
+			.resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
 			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_CSIS2 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(2),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
-			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
+			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
 			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(2),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		},
@@ -172,7 +171,7 @@  static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
 		{
 			/* EXYNOS_MIPI_PHY_ID_CSIS0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = BIT(0),
@@ -181,7 +180,7 @@  static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = BIT(0),
@@ -190,7 +189,7 @@  static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_CSIS1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = BIT(1),
@@ -199,7 +198,7 @@  static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = BIT(1),
@@ -208,7 +207,7 @@  static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_CSIS2 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(2),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = BIT(0),
diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c
index 7c896d0cda18..7c41daa2c625 100644
--- a/drivers/phy/phy-exynos5-usbdrd.c
+++ b/drivers/phy/phy-exynos5-usbdrd.c
@@ -22,7 +22,6 @@ 
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 #include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/exynos5-pmu.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/soc/samsung/exynos-regs-pmu.h>
@@ -236,10 +235,10 @@  static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst,
 	if (!inst->reg_pmu)
 		return;
 
-	val = on ? 0 : EXYNOS5_PHY_ENABLE;
+	val = on ? 0 : EXYNOS4_PHY_ENABLE;
 
 	regmap_update_bits(inst->reg_pmu, inst->pmu_offset,
-			   EXYNOS5_PHY_ENABLE, val);
+			   EXYNOS4_PHY_ENABLE, val);
 }
 
 /*
diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
index c261ed927e1e..bebdde5dccd6 100644
--- a/include/linux/soc/samsung/exynos-regs-pmu.h
+++ b/include/linux/soc/samsung/exynos-regs-pmu.h
@@ -52,7 +52,8 @@ 
 
 /* MIPI_PHYn_CONTROL, valid for Exynos3250, Exynos4, Exynos5250 and Exynos5433 */
 #define EXYNOS4_MIPI_PHY_CONTROL(n)		(0x0710 + (n) * 4)
-#define EXYNOS4_MIPI_PHY_ENABLE			(1 << 0)
+/* Phy enable bit, common for all phy registers, not only MIPI */
+#define EXYNOS4_PHY_ENABLE			(1 << 0)
 #define EXYNOS4_MIPI_PHY_SRESETN		(1 << 1)
 #define EXYNOS4_MIPI_PHY_MRESETN		(1 << 2)
 #define EXYNOS4_MIPI_PHY_RESET_MASK		(3 << 1)