diff mbox series

[v6,08/23] Documentation: PCI: Add binding documentation for pci-test endpoint function

Message ID 20170405085243.18123-9-kishon@ti.com
State Accepted
Commit 13570533813cf111bb49954392cca0c2c409e775
Headers show
Series [v6,01/23] PCI: endpoint: Add EP core layer to enable EP controller and EP functions | expand

Commit Message

Kishon Vijay Abraham I April 5, 2017, 8:52 a.m. UTC 
Add binding documentation for pci-test endpoint function that helps in
adding and configuring pci-test endpoint function.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

---
 Documentation/PCI/00-INDEX                              |  2 ++
 .../PCI/endpoint/function/binding/pci-test.txt          | 17 +++++++++++++++++
 2 files changed, 19 insertions(+)
 create mode 100644 Documentation/PCI/endpoint/function/binding/pci-test.txt

-- 
2.11.0
diff mbox series

Patch

diff --git a/Documentation/PCI/00-INDEX b/Documentation/PCI/00-INDEX
index ab35e4bbdb1c..2fc901a1c32e 100644
--- a/Documentation/PCI/00-INDEX
+++ b/Documentation/PCI/00-INDEX
@@ -18,3 +18,5 @@  endpoint/pci-endpoint-cfs.txt
 	- guide to use configfs to configure the PCI endpoint function.
 endpoint/pci-test-function.txt
 	- specification of *PCI test* function device.
+endpoint/function/binding/
+	- binding documentation for PCI endpoint function
diff --git a/Documentation/PCI/endpoint/function/binding/pci-test.txt b/Documentation/PCI/endpoint/function/binding/pci-test.txt
new file mode 100644
index 000000000000..3b68b955fb50
--- /dev/null
+++ b/Documentation/PCI/endpoint/function/binding/pci-test.txt
@@ -0,0 +1,17 @@ 
+PCI TEST ENDPOINT FUNCTION
+
+name: Should be "pci_epf_test" to bind to the pci_epf_test driver.
+
+Configurable Fields:
+vendorid	 : should be 0x104c
+deviceid	 : should be 0xb500 for DRA74x and 0xb501 for DRA72x
+revid		 : don't care
+progif_code	 : don't care
+subclass_code	 : don't care
+baseclass_code	 : should be 0xff
+cache_line_size	 : don't care
+subsys_vendor_id : don't care
+subsys_id	 : don't care
+interrupt_pin	 : Should be 1 - INTA, 2 - INTB, 3 - INTC, 4 -INTD
+msi_interrupts	 : Should be 1 to 32 depending on the number of MSI interrupts
+		   to test