@@ -32,8 +32,7 @@ static const struct resources csiphy_res[] = {
/* CSIPHY0 */
{
.regulator = { NULL },
- .clock = { "camss_top_ahb", "ispif_ahb",
- "camss_ahb", "csiphy0_timer" },
+ .clock = { "top_ahb", "ispif_ahb", "ahb", "csiphy0_timer" },
.clock_rate = { { 0 },
{ 0 },
{ 0 },
@@ -45,8 +44,7 @@ static const struct resources csiphy_res[] = {
/* CSIPHY1 */
{
.regulator = { NULL },
- .clock = { "camss_top_ahb", "ispif_ahb",
- "camss_ahb", "csiphy1_timer" },
+ .clock = { "top_ahb", "ispif_ahb", "ahb", "csiphy1_timer" },
.clock_rate = { { 0 },
{ 0 },
{ 0 },
@@ -60,8 +58,7 @@ static const struct resources csid_res[] = {
/* CSID0 */
{
.regulator = { "vdda" },
- .clock = { "camss_top_ahb", "ispif_ahb",
- "csi0_ahb", "camss_ahb",
+ .clock = { "top_ahb", "ispif_ahb", "csi0_ahb", "ahb",
"csi0", "csi0_phy", "csi0_pix", "csi0_rdi" },
.clock_rate = { { 0 },
{ 0 },
@@ -78,8 +75,7 @@ static const struct resources csid_res[] = {
/* CSID1 */
{
.regulator = { "vdda" },
- .clock = { "camss_top_ahb", "ispif_ahb",
- "csi1_ahb", "camss_ahb",
+ .clock = { "top_ahb", "ispif_ahb", "csi1_ahb", "ahb",
"csi1", "csi1_phy", "csi1_pix", "csi1_rdi" },
.clock_rate = { { 0 },
{ 0 },
@@ -96,10 +92,10 @@ static const struct resources csid_res[] = {
static const struct resources_ispif ispif_res = {
/* ISPIF */
- .clock = { "camss_top_ahb", "camss_ahb", "ispif_ahb",
+ .clock = { "top_ahb", "ahb", "ispif_ahb",
"csi0", "csi0_pix", "csi0_rdi",
"csi1", "csi1_pix", "csi1_rdi" },
- .clock_for_reset = { "camss_vfe_vfe", "camss_csi_vfe" },
+ .clock_for_reset = { "vfe0", "csi_vfe0" },
.reg = { "ispif", "csi_clk_mux" },
.interrupt = "ispif"
@@ -108,8 +104,8 @@ static const struct resources_ispif ispif_res = {
static const struct resources vfe_res = {
/* VFE0 */
.regulator = { NULL },
- .clock = { "camss_top_ahb", "camss_vfe_vfe", "camss_csi_vfe",
- "iface", "bus", "camss_ahb" },
+ .clock = { "top_ahb", "vfe0", "csi_vfe0",
+ "vfe_ahb", "vfe_axi", "ahb" },
.clock_rate = { { 0 },
{ 50000000, 80000000, 100000000, 160000000,
177780000, 200000000, 266670000, 320000000,
Use more logical clock names - similar to the names in documentation. This will allow better handling of the clocks in the driver when support for more hardware versions is added - equivalent clocks on different hardware versions will have the same name. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> --- drivers/media/platform/qcom/camss/camss.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) -- 2.7.4