@@ -11796,7 +11796,7 @@ L: linux-media@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/media/qcom,camss.txt
F: Documentation/media/v4l-drivers/qcom_camss.rst
-F: drivers/media/platform/qcom/camss-8x16/
+F: drivers/media/platform/qcom/camss/
QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
M: Ilia Lin <ilia.lin@gmail.com>
@@ -90,7 +90,7 @@ config VIDEO_PXA27x
This is a v4l2 driver for the PXA27x Quick Capture Interface
config VIDEO_QCOM_CAMSS
- tristate "Qualcomm 8x16 V4L2 Camera Subsystem driver"
+ tristate "Qualcomm V4L2 Camera Subsystem driver"
depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST
select VIDEOBUF2_DMA_SG
@@ -88,7 +88,7 @@ obj-$(CONFIG_VIDEO_MEDIATEK_MDP) += mtk-mdp/
obj-$(CONFIG_VIDEO_MEDIATEK_JPEG) += mtk-jpeg/
-obj-$(CONFIG_VIDEO_QCOM_CAMSS) += qcom/camss-8x16/
+obj-$(CONFIG_VIDEO_QCOM_CAMSS) += qcom/camss/
obj-$(CONFIG_VIDEO_QCOM_VENUS) += qcom/venus/
deleted file mode 100644
@@ -1,11 +0,0 @@
-# Makefile for Qualcomm CAMSS driver
-
-qcom-camss-objs += \
- camss.o \
- camss-csid.o \
- camss-csiphy.o \
- camss-ispif.o \
- camss-vfe.o \
- camss-video.o \
-
-obj-$(CONFIG_VIDEO_QCOM_CAMSS) += qcom-camss.o
deleted file mode 100644
@@ -1,1094 +0,0 @@
-/*
- * camss-csid.c
- *
- * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module
- *
- * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved.
- * Copyright (C) 2015-2017 Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/clk.h>
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/consumer.h>
-#include <media/media-entity.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-
-#include "camss-csid.h"
-#include "camss.h"
-
-#define MSM_CSID_NAME "msm_csid"
-
-#define CAMSS_CSID_HW_VERSION 0x0
-#define CAMSS_CSID_CORE_CTRL_0 0x004
-#define CAMSS_CSID_CORE_CTRL_1 0x008
-#define CAMSS_CSID_RST_CMD 0x00c
-#define CAMSS_CSID_CID_LUT_VC_n(n) (0x010 + 0x4 * (n))
-#define CAMSS_CSID_CID_n_CFG(n) (0x020 + 0x4 * (n))
-#define CAMSS_CSID_IRQ_CLEAR_CMD 0x060
-#define CAMSS_CSID_IRQ_MASK 0x064
-#define CAMSS_CSID_IRQ_STATUS 0x068
-#define CAMSS_CSID_TG_CTRL 0x0a0
-#define CAMSS_CSID_TG_CTRL_DISABLE 0xa06436
-#define CAMSS_CSID_TG_CTRL_ENABLE 0xa06437
-#define CAMSS_CSID_TG_VC_CFG 0x0a4
-#define CAMSS_CSID_TG_VC_CFG_H_BLANKING 0x3ff
-#define CAMSS_CSID_TG_VC_CFG_V_BLANKING 0x7f
-#define CAMSS_CSID_TG_DT_n_CGG_0(n) (0x0ac + 0xc * (n))
-#define CAMSS_CSID_TG_DT_n_CGG_1(n) (0x0b0 + 0xc * (n))
-#define CAMSS_CSID_TG_DT_n_CGG_2(n) (0x0b4 + 0xc * (n))
-
-#define DATA_TYPE_EMBEDDED_DATA_8BIT 0x12
-#define DATA_TYPE_YUV422_8BIT 0x1e
-#define DATA_TYPE_RAW_6BIT 0x28
-#define DATA_TYPE_RAW_8BIT 0x2a
-#define DATA_TYPE_RAW_10BIT 0x2b
-#define DATA_TYPE_RAW_12BIT 0x2c
-
-#define DECODE_FORMAT_UNCOMPRESSED_6_BIT 0x0
-#define DECODE_FORMAT_UNCOMPRESSED_8_BIT 0x1
-#define DECODE_FORMAT_UNCOMPRESSED_10_BIT 0x2
-#define DECODE_FORMAT_UNCOMPRESSED_12_BIT 0x3
-
-#define CSID_RESET_TIMEOUT_MS 500
-
-struct csid_fmts {
- u32 code;
- u8 data_type;
- u8 decode_format;
- u8 bpp;
- u8 spp; /* bus samples per pixel */
-};
-
-static const struct csid_fmts csid_input_fmts[] = {
- {
- MEDIA_BUS_FMT_UYVY8_2X8,
- DATA_TYPE_YUV422_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 2,
- },
- {
- MEDIA_BUS_FMT_VYUY8_2X8,
- DATA_TYPE_YUV422_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 2,
- },
- {
- MEDIA_BUS_FMT_YUYV8_2X8,
- DATA_TYPE_YUV422_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 2,
- },
- {
- MEDIA_BUS_FMT_YVYU8_2X8,
- DATA_TYPE_YUV422_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 2,
- },
- {
- MEDIA_BUS_FMT_SBGGR8_1X8,
- DATA_TYPE_RAW_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGBRG8_1X8,
- DATA_TYPE_RAW_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGRBG8_1X8,
- DATA_TYPE_RAW_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 1,
- },
- {
- MEDIA_BUS_FMT_SRGGB8_1X8,
- DATA_TYPE_RAW_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 1,
- },
- {
- MEDIA_BUS_FMT_SBGGR10_1X10,
- DATA_TYPE_RAW_10BIT,
- DECODE_FORMAT_UNCOMPRESSED_10_BIT,
- 10,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGBRG10_1X10,
- DATA_TYPE_RAW_10BIT,
- DECODE_FORMAT_UNCOMPRESSED_10_BIT,
- 10,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGRBG10_1X10,
- DATA_TYPE_RAW_10BIT,
- DECODE_FORMAT_UNCOMPRESSED_10_BIT,
- 10,
- 1,
- },
- {
- MEDIA_BUS_FMT_SRGGB10_1X10,
- DATA_TYPE_RAW_10BIT,
- DECODE_FORMAT_UNCOMPRESSED_10_BIT,
- 10,
- 1,
- },
- {
- MEDIA_BUS_FMT_SBGGR12_1X12,
- DATA_TYPE_RAW_12BIT,
- DECODE_FORMAT_UNCOMPRESSED_12_BIT,
- 12,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGBRG12_1X12,
- DATA_TYPE_RAW_12BIT,
- DECODE_FORMAT_UNCOMPRESSED_12_BIT,
- 12,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGRBG12_1X12,
- DATA_TYPE_RAW_12BIT,
- DECODE_FORMAT_UNCOMPRESSED_12_BIT,
- 12,
- 1,
- },
- {
- MEDIA_BUS_FMT_SRGGB12_1X12,
- DATA_TYPE_RAW_12BIT,
- DECODE_FORMAT_UNCOMPRESSED_12_BIT,
- 12,
- 1,
- }
-};
-
-static const struct csid_fmts *csid_get_fmt_entry(u32 code)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(csid_input_fmts); i++)
- if (code == csid_input_fmts[i].code)
- return &csid_input_fmts[i];
-
- WARN(1, "Unknown format\n");
-
- return &csid_input_fmts[0];
-}
-
-/*
- * csid_isr - CSID module interrupt handler
- * @irq: Interrupt line
- * @dev: CSID device
- *
- * Return IRQ_HANDLED on success
- */
-static irqreturn_t csid_isr(int irq, void *dev)
-{
- struct csid_device *csid = dev;
- u32 value;
-
- value = readl_relaxed(csid->base + CAMSS_CSID_IRQ_STATUS);
- writel_relaxed(value, csid->base + CAMSS_CSID_IRQ_CLEAR_CMD);
-
- if ((value >> 11) & 0x1)
- complete(&csid->reset_complete);
-
- return IRQ_HANDLED;
-}
-
-/*
- * csid_set_clock_rates - Calculate and set clock rates on CSID module
- * @csiphy: CSID device
- */
-static int csid_set_clock_rates(struct csid_device *csid)
-{
- struct device *dev = to_device_index(csid, csid->id);
- u32 pixel_clock;
- int i, j;
- int ret;
-
- ret = camss_get_pixel_clock(&csid->subdev.entity, &pixel_clock);
- if (ret)
- pixel_clock = 0;
-
- for (i = 0; i < csid->nclocks; i++) {
- struct camss_clock *clock = &csid->clock[i];
-
- if (!strcmp(clock->name, "csi0") ||
- !strcmp(clock->name, "csi1")) {
- u8 bpp = csid_get_fmt_entry(
- csid->fmt[MSM_CSIPHY_PAD_SINK].code)->bpp;
- u8 num_lanes = csid->phy.lane_cnt;
- u64 min_rate = pixel_clock * bpp / (2 * num_lanes * 4);
- long rate;
-
- camss_add_clock_margin(&min_rate);
-
- for (j = 0; j < clock->nfreqs; j++)
- if (min_rate < clock->freq[j])
- break;
-
- if (j == clock->nfreqs) {
- dev_err(dev,
- "Pixel clock is too high for CSID\n");
- return -EINVAL;
- }
-
- /* if sensor pixel clock is not available */
- /* set highest possible CSID clock rate */
- if (min_rate == 0)
- j = clock->nfreqs - 1;
-
- rate = clk_round_rate(clock->clk, clock->freq[j]);
- if (rate < 0) {
- dev_err(dev, "clk round rate failed: %ld\n",
- rate);
- return -EINVAL;
- }
-
- ret = clk_set_rate(clock->clk, rate);
- if (ret < 0) {
- dev_err(dev, "clk set rate failed: %d\n", ret);
- return ret;
- }
- }
- }
-
- return 0;
-}
-
-/*
- * csid_reset - Trigger reset on CSID module and wait to complete
- * @csid: CSID device
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int csid_reset(struct csid_device *csid)
-{
- unsigned long time;
-
- reinit_completion(&csid->reset_complete);
-
- writel_relaxed(0x7fff, csid->base + CAMSS_CSID_RST_CMD);
-
- time = wait_for_completion_timeout(&csid->reset_complete,
- msecs_to_jiffies(CSID_RESET_TIMEOUT_MS));
- if (!time) {
- dev_err(to_device_index(csid, csid->id),
- "CSID reset timeout\n");
- return -EIO;
- }
-
- return 0;
-}
-
-/*
- * csid_set_power - Power on/off CSID module
- * @sd: CSID V4L2 subdevice
- * @on: Requested power state
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int csid_set_power(struct v4l2_subdev *sd, int on)
-{
- struct csid_device *csid = v4l2_get_subdevdata(sd);
- struct device *dev = to_device_index(csid, csid->id);
- int ret;
-
- if (on) {
- u32 hw_version;
-
- ret = regulator_enable(csid->vdda);
- if (ret < 0)
- return ret;
-
- ret = csid_set_clock_rates(csid);
- if (ret < 0) {
- regulator_disable(csid->vdda);
- return ret;
- }
-
- ret = camss_enable_clocks(csid->nclocks, csid->clock, dev);
- if (ret < 0) {
- regulator_disable(csid->vdda);
- return ret;
- }
-
- enable_irq(csid->irq);
-
- ret = csid_reset(csid);
- if (ret < 0) {
- disable_irq(csid->irq);
- camss_disable_clocks(csid->nclocks, csid->clock);
- regulator_disable(csid->vdda);
- return ret;
- }
-
- hw_version = readl_relaxed(csid->base + CAMSS_CSID_HW_VERSION);
- dev_dbg(dev, "CSID HW Version = 0x%08x\n", hw_version);
- } else {
- disable_irq(csid->irq);
- camss_disable_clocks(csid->nclocks, csid->clock);
- ret = regulator_disable(csid->vdda);
- }
-
- return ret;
-}
-
-/*
- * csid_set_stream - Enable/disable streaming on CSID module
- * @sd: CSID V4L2 subdevice
- * @enable: Requested streaming state
- *
- * Main configuration of CSID module is also done here.
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int csid_set_stream(struct v4l2_subdev *sd, int enable)
-{
- struct csid_device *csid = v4l2_get_subdevdata(sd);
- struct csid_testgen_config *tg = &csid->testgen;
- u32 val;
-
- if (enable) {
- u8 vc = 0; /* Virtual Channel 0 */
- u8 cid = vc * 4; /* id of Virtual Channel and Data Type set */
- u8 dt, dt_shift, df;
- int ret;
-
- ret = v4l2_ctrl_handler_setup(&csid->ctrls);
- if (ret < 0) {
- dev_err(to_device_index(csid, csid->id),
- "could not sync v4l2 controls: %d\n", ret);
- return ret;
- }
-
- if (!tg->enabled &&
- !media_entity_remote_pad(&csid->pads[MSM_CSID_PAD_SINK]))
- return -ENOLINK;
-
- dt = csid_get_fmt_entry(csid->fmt[MSM_CSID_PAD_SRC].code)->
- data_type;
-
- if (tg->enabled) {
- /* Config Test Generator */
- struct v4l2_mbus_framefmt *f =
- &csid->fmt[MSM_CSID_PAD_SRC];
- u8 bpp = csid_get_fmt_entry(f->code)->bpp;
- u8 spp = csid_get_fmt_entry(f->code)->spp;
- u32 num_bytes_per_line = f->width * bpp * spp / 8;
- u32 num_lines = f->height;
-
- /* 31:24 V blank, 23:13 H blank, 3:2 num of active DT */
- /* 1:0 VC */
- val = ((CAMSS_CSID_TG_VC_CFG_V_BLANKING & 0xff) << 24) |
- ((CAMSS_CSID_TG_VC_CFG_H_BLANKING & 0x7ff) << 13);
- writel_relaxed(val, csid->base + CAMSS_CSID_TG_VC_CFG);
-
- /* 28:16 bytes per lines, 12:0 num of lines */
- val = ((num_bytes_per_line & 0x1fff) << 16) |
- (num_lines & 0x1fff);
- writel_relaxed(val, csid->base +
- CAMSS_CSID_TG_DT_n_CGG_0(0));
-
- /* 5:0 data type */
- val = dt;
- writel_relaxed(val, csid->base +
- CAMSS_CSID_TG_DT_n_CGG_1(0));
-
- /* 2:0 output test pattern */
- val = tg->payload_mode;
- writel_relaxed(val, csid->base +
- CAMSS_CSID_TG_DT_n_CGG_2(0));
- } else {
- struct csid_phy_config *phy = &csid->phy;
-
- val = phy->lane_cnt - 1;
- val |= phy->lane_assign << 4;
-
- writel_relaxed(val,
- csid->base + CAMSS_CSID_CORE_CTRL_0);
-
- val = phy->csiphy_id << 17;
- val |= 0x9;
-
- writel_relaxed(val,
- csid->base + CAMSS_CSID_CORE_CTRL_1);
- }
-
- /* Config LUT */
-
- dt_shift = (cid % 4) * 8;
- df = csid_get_fmt_entry(csid->fmt[MSM_CSID_PAD_SINK].code)->
- decode_format;
-
- val = readl_relaxed(csid->base + CAMSS_CSID_CID_LUT_VC_n(vc));
- val &= ~(0xff << dt_shift);
- val |= dt << dt_shift;
- writel_relaxed(val, csid->base + CAMSS_CSID_CID_LUT_VC_n(vc));
-
- val = (df << 4) | 0x3;
- writel_relaxed(val, csid->base + CAMSS_CSID_CID_n_CFG(cid));
-
- if (tg->enabled) {
- val = CAMSS_CSID_TG_CTRL_ENABLE;
- writel_relaxed(val, csid->base + CAMSS_CSID_TG_CTRL);
- }
- } else {
- if (tg->enabled) {
- val = CAMSS_CSID_TG_CTRL_DISABLE;
- writel_relaxed(val, csid->base + CAMSS_CSID_TG_CTRL);
- }
- }
-
- return 0;
-}
-
-/*
- * __csid_get_format - Get pointer to format structure
- * @csid: CSID device
- * @cfg: V4L2 subdev pad configuration
- * @pad: pad from which format is requested
- * @which: TRY or ACTIVE format
- *
- * Return pointer to TRY or ACTIVE format structure
- */
-static struct v4l2_mbus_framefmt *
-__csid_get_format(struct csid_device *csid,
- struct v4l2_subdev_pad_config *cfg,
- unsigned int pad,
- enum v4l2_subdev_format_whence which)
-{
- if (which == V4L2_SUBDEV_FORMAT_TRY)
- return v4l2_subdev_get_try_format(&csid->subdev, cfg, pad);
-
- return &csid->fmt[pad];
-}
-
-/*
- * csid_try_format - Handle try format by pad subdev method
- * @csid: CSID device
- * @cfg: V4L2 subdev pad configuration
- * @pad: pad on which format is requested
- * @fmt: pointer to v4l2 format structure
- * @which: wanted subdev format
- */
-static void csid_try_format(struct csid_device *csid,
- struct v4l2_subdev_pad_config *cfg,
- unsigned int pad,
- struct v4l2_mbus_framefmt *fmt,
- enum v4l2_subdev_format_whence which)
-{
- unsigned int i;
-
- switch (pad) {
- case MSM_CSID_PAD_SINK:
- /* Set format on sink pad */
-
- for (i = 0; i < ARRAY_SIZE(csid_input_fmts); i++)
- if (fmt->code == csid_input_fmts[i].code)
- break;
-
- /* If not found, use UYVY as default */
- if (i >= ARRAY_SIZE(csid_input_fmts))
- fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
-
- fmt->width = clamp_t(u32, fmt->width, 1, 8191);
- fmt->height = clamp_t(u32, fmt->height, 1, 8191);
-
- fmt->field = V4L2_FIELD_NONE;
- fmt->colorspace = V4L2_COLORSPACE_SRGB;
-
- break;
-
- case MSM_CSID_PAD_SRC:
- if (csid->testgen_mode->cur.val == 0) {
- /* Test generator is disabled, keep pad formats */
- /* in sync - set and return a format same as sink pad */
- struct v4l2_mbus_framefmt format;
-
- format = *__csid_get_format(csid, cfg,
- MSM_CSID_PAD_SINK, which);
- *fmt = format;
- } else {
- /* Test generator is enabled, set format on source*/
- /* pad to allow test generator usage */
-
- for (i = 0; i < ARRAY_SIZE(csid_input_fmts); i++)
- if (csid_input_fmts[i].code == fmt->code)
- break;
-
- /* If not found, use UYVY as default */
- if (i >= ARRAY_SIZE(csid_input_fmts))
- fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
-
- fmt->width = clamp_t(u32, fmt->width, 1, 8191);
- fmt->height = clamp_t(u32, fmt->height, 1, 8191);
-
- fmt->field = V4L2_FIELD_NONE;
- }
- break;
- }
-
- fmt->colorspace = V4L2_COLORSPACE_SRGB;
-}
-
-/*
- * csid_enum_mbus_code - Handle pixel format enumeration
- * @sd: CSID V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @code: pointer to v4l2_subdev_mbus_code_enum structure
- * return -EINVAL or zero on success
- */
-static int csid_enum_mbus_code(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_mbus_code_enum *code)
-{
- struct csid_device *csid = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt *format;
-
- if (code->pad == MSM_CSID_PAD_SINK) {
- if (code->index >= ARRAY_SIZE(csid_input_fmts))
- return -EINVAL;
-
- code->code = csid_input_fmts[code->index].code;
- } else {
- if (csid->testgen_mode->cur.val == 0) {
- if (code->index > 0)
- return -EINVAL;
-
- format = __csid_get_format(csid, cfg, MSM_CSID_PAD_SINK,
- code->which);
-
- code->code = format->code;
- } else {
- if (code->index >= ARRAY_SIZE(csid_input_fmts))
- return -EINVAL;
-
- code->code = csid_input_fmts[code->index].code;
- }
- }
-
- return 0;
-}
-
-/*
- * csid_enum_frame_size - Handle frame size enumeration
- * @sd: CSID V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @fse: pointer to v4l2_subdev_frame_size_enum structure
- * return -EINVAL or zero on success
- */
-static int csid_enum_frame_size(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_frame_size_enum *fse)
-{
- struct csid_device *csid = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt format;
-
- if (fse->index != 0)
- return -EINVAL;
-
- format.code = fse->code;
- format.width = 1;
- format.height = 1;
- csid_try_format(csid, cfg, fse->pad, &format, fse->which);
- fse->min_width = format.width;
- fse->min_height = format.height;
-
- if (format.code != fse->code)
- return -EINVAL;
-
- format.code = fse->code;
- format.width = -1;
- format.height = -1;
- csid_try_format(csid, cfg, fse->pad, &format, fse->which);
- fse->max_width = format.width;
- fse->max_height = format.height;
-
- return 0;
-}
-
-/*
- * csid_get_format - Handle get format by pads subdev method
- * @sd: CSID V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @fmt: pointer to v4l2 subdev format structure
- *
- * Return -EINVAL or zero on success
- */
-static int csid_get_format(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *fmt)
-{
- struct csid_device *csid = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt *format;
-
- format = __csid_get_format(csid, cfg, fmt->pad, fmt->which);
- if (format == NULL)
- return -EINVAL;
-
- fmt->format = *format;
-
- return 0;
-}
-
-/*
- * csid_set_format - Handle set format by pads subdev method
- * @sd: CSID V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @fmt: pointer to v4l2 subdev format structure
- *
- * Return -EINVAL or zero on success
- */
-static int csid_set_format(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *fmt)
-{
- struct csid_device *csid = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt *format;
-
- format = __csid_get_format(csid, cfg, fmt->pad, fmt->which);
- if (format == NULL)
- return -EINVAL;
-
- csid_try_format(csid, cfg, fmt->pad, &fmt->format, fmt->which);
- *format = fmt->format;
-
- /* Propagate the format from sink to source */
- if (fmt->pad == MSM_CSID_PAD_SINK) {
- format = __csid_get_format(csid, cfg, MSM_CSID_PAD_SRC,
- fmt->which);
-
- *format = fmt->format;
- csid_try_format(csid, cfg, MSM_CSID_PAD_SRC, format,
- fmt->which);
- }
-
- return 0;
-}
-
-/*
- * csid_init_formats - Initialize formats on all pads
- * @sd: CSID V4L2 subdevice
- * @fh: V4L2 subdev file handle
- *
- * Initialize all pad formats with default values.
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int csid_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
- struct v4l2_subdev_format format = {
- .pad = MSM_CSID_PAD_SINK,
- .which = fh ? V4L2_SUBDEV_FORMAT_TRY :
- V4L2_SUBDEV_FORMAT_ACTIVE,
- .format = {
- .code = MEDIA_BUS_FMT_UYVY8_2X8,
- .width = 1920,
- .height = 1080
- }
- };
-
- return csid_set_format(sd, fh ? fh->pad : NULL, &format);
-}
-
-static const char * const csid_test_pattern_menu[] = {
- "Disabled",
- "Incrementing",
- "Alternating 0x55/0xAA",
- "All Zeros 0x00",
- "All Ones 0xFF",
- "Pseudo-random Data",
-};
-
-/*
- * csid_set_test_pattern - Set test generator's pattern mode
- * @csid: CSID device
- * @value: desired test pattern mode
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int csid_set_test_pattern(struct csid_device *csid, s32 value)
-{
- struct csid_testgen_config *tg = &csid->testgen;
-
- /* If CSID is linked to CSIPHY, do not allow to enable test generator */
- if (value && media_entity_remote_pad(&csid->pads[MSM_CSID_PAD_SINK]))
- return -EBUSY;
-
- tg->enabled = !!value;
-
- switch (value) {
- case 1:
- tg->payload_mode = CSID_PAYLOAD_MODE_INCREMENTING;
- break;
- case 2:
- tg->payload_mode = CSID_PAYLOAD_MODE_ALTERNATING_55_AA;
- break;
- case 3:
- tg->payload_mode = CSID_PAYLOAD_MODE_ALL_ZEROES;
- break;
- case 4:
- tg->payload_mode = CSID_PAYLOAD_MODE_ALL_ONES;
- break;
- case 5:
- tg->payload_mode = CSID_PAYLOAD_MODE_RANDOM;
- break;
- }
-
- return 0;
-}
-
-/*
- * csid_s_ctrl - Handle set control subdev method
- * @ctrl: pointer to v4l2 control structure
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int csid_s_ctrl(struct v4l2_ctrl *ctrl)
-{
- struct csid_device *csid = container_of(ctrl->handler,
- struct csid_device, ctrls);
- int ret = -EINVAL;
-
- switch (ctrl->id) {
- case V4L2_CID_TEST_PATTERN:
- ret = csid_set_test_pattern(csid, ctrl->val);
- break;
- }
-
- return ret;
-}
-
-static const struct v4l2_ctrl_ops csid_ctrl_ops = {
- .s_ctrl = csid_s_ctrl,
-};
-
-/*
- * msm_csid_subdev_init - Initialize CSID device structure and resources
- * @csid: CSID device
- * @res: CSID module resources table
- * @id: CSID module id
- *
- * Return 0 on success or a negative error code otherwise
- */
-int msm_csid_subdev_init(struct csid_device *csid,
- const struct resources *res, u8 id)
-{
- struct device *dev = to_device_index(csid, id);
- struct platform_device *pdev = to_platform_device(dev);
- struct resource *r;
- int i, j;
- int ret;
-
- csid->id = id;
-
- /* Memory */
-
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[0]);
- csid->base = devm_ioremap_resource(dev, r);
- if (IS_ERR(csid->base)) {
- dev_err(dev, "could not map memory\n");
- return PTR_ERR(csid->base);
- }
-
- /* Interrupt */
-
- r = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
- res->interrupt[0]);
- if (!r) {
- dev_err(dev, "missing IRQ\n");
- return -EINVAL;
- }
-
- csid->irq = r->start;
- snprintf(csid->irq_name, sizeof(csid->irq_name), "%s_%s%d",
- dev_name(dev), MSM_CSID_NAME, csid->id);
- ret = devm_request_irq(dev, csid->irq, csid_isr,
- IRQF_TRIGGER_RISING, csid->irq_name, csid);
- if (ret < 0) {
- dev_err(dev, "request_irq failed: %d\n", ret);
- return ret;
- }
-
- disable_irq(csid->irq);
-
- /* Clocks */
-
- csid->nclocks = 0;
- while (res->clock[csid->nclocks])
- csid->nclocks++;
-
- csid->clock = devm_kcalloc(dev, csid->nclocks, sizeof(*csid->clock),
- GFP_KERNEL);
- if (!csid->clock)
- return -ENOMEM;
-
- for (i = 0; i < csid->nclocks; i++) {
- struct camss_clock *clock = &csid->clock[i];
-
- clock->clk = devm_clk_get(dev, res->clock[i]);
- if (IS_ERR(clock->clk))
- return PTR_ERR(clock->clk);
-
- clock->name = res->clock[i];
-
- clock->nfreqs = 0;
- while (res->clock_rate[i][clock->nfreqs])
- clock->nfreqs++;
-
- if (!clock->nfreqs) {
- clock->freq = NULL;
- continue;
- }
-
- clock->freq = devm_kcalloc(dev,
- clock->nfreqs,
- sizeof(*clock->freq),
- GFP_KERNEL);
- if (!clock->freq)
- return -ENOMEM;
-
- for (j = 0; j < clock->nfreqs; j++)
- clock->freq[j] = res->clock_rate[i][j];
- }
-
- /* Regulator */
-
- csid->vdda = devm_regulator_get(dev, res->regulator[0]);
- if (IS_ERR(csid->vdda)) {
- dev_err(dev, "could not get regulator\n");
- return PTR_ERR(csid->vdda);
- }
-
- init_completion(&csid->reset_complete);
-
- return 0;
-}
-
-/*
- * msm_csid_get_csid_id - Get CSID HW module id
- * @entity: Pointer to CSID media entity structure
- * @id: Return CSID HW module id here
- */
-void msm_csid_get_csid_id(struct media_entity *entity, u8 *id)
-{
- struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
- struct csid_device *csid = v4l2_get_subdevdata(sd);
-
- *id = csid->id;
-}
-
-/*
- * csid_get_lane_assign - Calculate CSI2 lane assign configuration parameter
- * @lane_cfg - CSI2 lane configuration
- *
- * Return lane assign
- */
-static u32 csid_get_lane_assign(struct csiphy_lanes_cfg *lane_cfg)
-{
- u32 lane_assign = 0;
- int i;
-
- for (i = 0; i < lane_cfg->num_data; i++)
- lane_assign |= lane_cfg->data[i].pos << (i * 4);
-
- return lane_assign;
-}
-
-/*
- * csid_link_setup - Setup CSID connections
- * @entity: Pointer to media entity structure
- * @local: Pointer to local pad
- * @remote: Pointer to remote pad
- * @flags: Link flags
- *
- * Return 0 on success
- */
-static int csid_link_setup(struct media_entity *entity,
- const struct media_pad *local,
- const struct media_pad *remote, u32 flags)
-{
- if (flags & MEDIA_LNK_FL_ENABLED)
- if (media_entity_remote_pad(local))
- return -EBUSY;
-
- if ((local->flags & MEDIA_PAD_FL_SINK) &&
- (flags & MEDIA_LNK_FL_ENABLED)) {
- struct v4l2_subdev *sd;
- struct csid_device *csid;
- struct csiphy_device *csiphy;
- struct csiphy_lanes_cfg *lane_cfg;
- struct v4l2_subdev_format format = { 0 };
-
- sd = media_entity_to_v4l2_subdev(entity);
- csid = v4l2_get_subdevdata(sd);
-
- /* If test generator is enabled */
- /* do not allow a link from CSIPHY to CSID */
- if (csid->testgen_mode->cur.val != 0)
- return -EBUSY;
-
- sd = media_entity_to_v4l2_subdev(remote->entity);
- csiphy = v4l2_get_subdevdata(sd);
-
- /* If a sensor is not linked to CSIPHY */
- /* do no allow a link from CSIPHY to CSID */
- if (!csiphy->cfg.csi2)
- return -EPERM;
-
- csid->phy.csiphy_id = csiphy->id;
-
- lane_cfg = &csiphy->cfg.csi2->lane_cfg;
- csid->phy.lane_cnt = lane_cfg->num_data;
- csid->phy.lane_assign = csid_get_lane_assign(lane_cfg);
-
- /* Reset format on source pad to sink pad format */
- format.pad = MSM_CSID_PAD_SRC;
- format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
- csid_set_format(&csid->subdev, NULL, &format);
- }
-
- return 0;
-}
-
-static const struct v4l2_subdev_core_ops csid_core_ops = {
- .s_power = csid_set_power,
-};
-
-static const struct v4l2_subdev_video_ops csid_video_ops = {
- .s_stream = csid_set_stream,
-};
-
-static const struct v4l2_subdev_pad_ops csid_pad_ops = {
- .enum_mbus_code = csid_enum_mbus_code,
- .enum_frame_size = csid_enum_frame_size,
- .get_fmt = csid_get_format,
- .set_fmt = csid_set_format,
-};
-
-static const struct v4l2_subdev_ops csid_v4l2_ops = {
- .core = &csid_core_ops,
- .video = &csid_video_ops,
- .pad = &csid_pad_ops,
-};
-
-static const struct v4l2_subdev_internal_ops csid_v4l2_internal_ops = {
- .open = csid_init_formats,
-};
-
-static const struct media_entity_operations csid_media_ops = {
- .link_setup = csid_link_setup,
- .link_validate = v4l2_subdev_link_validate,
-};
-
-/*
- * msm_csid_register_entity - Register subdev node for CSID module
- * @csid: CSID device
- * @v4l2_dev: V4L2 device
- *
- * Return 0 on success or a negative error code otherwise
- */
-int msm_csid_register_entity(struct csid_device *csid,
- struct v4l2_device *v4l2_dev)
-{
- struct v4l2_subdev *sd = &csid->subdev;
- struct media_pad *pads = csid->pads;
- struct device *dev = to_device_index(csid, csid->id);
- int ret;
-
- v4l2_subdev_init(sd, &csid_v4l2_ops);
- sd->internal_ops = &csid_v4l2_internal_ops;
- sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
- snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d",
- MSM_CSID_NAME, csid->id);
- v4l2_set_subdevdata(sd, csid);
-
- ret = v4l2_ctrl_handler_init(&csid->ctrls, 1);
- if (ret < 0) {
- dev_err(dev, "Failed to init ctrl handler: %d\n", ret);
- return ret;
- }
-
- csid->testgen_mode = v4l2_ctrl_new_std_menu_items(&csid->ctrls,
- &csid_ctrl_ops, V4L2_CID_TEST_PATTERN,
- ARRAY_SIZE(csid_test_pattern_menu) - 1, 0, 0,
- csid_test_pattern_menu);
-
- if (csid->ctrls.error) {
- dev_err(dev, "Failed to init ctrl: %d\n", csid->ctrls.error);
- ret = csid->ctrls.error;
- goto free_ctrl;
- }
-
- csid->subdev.ctrl_handler = &csid->ctrls;
-
- ret = csid_init_formats(sd, NULL);
- if (ret < 0) {
- dev_err(dev, "Failed to init format: %d\n", ret);
- goto free_ctrl;
- }
-
- pads[MSM_CSID_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
- pads[MSM_CSID_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
-
- sd->entity.function = MEDIA_ENT_F_IO_V4L;
- sd->entity.ops = &csid_media_ops;
- ret = media_entity_pads_init(&sd->entity, MSM_CSID_PADS_NUM, pads);
- if (ret < 0) {
- dev_err(dev, "Failed to init media entity: %d\n", ret);
- goto free_ctrl;
- }
-
- ret = v4l2_device_register_subdev(v4l2_dev, sd);
- if (ret < 0) {
- dev_err(dev, "Failed to register subdev: %d\n", ret);
- goto media_cleanup;
- }
-
- return 0;
-
-media_cleanup:
- media_entity_cleanup(&sd->entity);
-free_ctrl:
- v4l2_ctrl_handler_free(&csid->ctrls);
-
- return ret;
-}
-
-/*
- * msm_csid_unregister_entity - Unregister CSID module subdev node
- * @csid: CSID device
- */
-void msm_csid_unregister_entity(struct csid_device *csid)
-{
- v4l2_device_unregister_subdev(&csid->subdev);
- media_entity_cleanup(&csid->subdev.entity);
- v4l2_ctrl_handler_free(&csid->ctrls);
-}
deleted file mode 100644
@@ -1,82 +0,0 @@
-/*
- * camss-csid.h
- *
- * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module
- *
- * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.
- * Copyright (C) 2015-2017 Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef QC_MSM_CAMSS_CSID_H
-#define QC_MSM_CAMSS_CSID_H
-
-#include <linux/clk.h>
-#include <media/media-entity.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-mediabus.h>
-#include <media/v4l2-subdev.h>
-
-#define MSM_CSID_PAD_SINK 0
-#define MSM_CSID_PAD_SRC 1
-#define MSM_CSID_PADS_NUM 2
-
-enum csid_payload_mode {
- CSID_PAYLOAD_MODE_INCREMENTING = 0,
- CSID_PAYLOAD_MODE_ALTERNATING_55_AA = 1,
- CSID_PAYLOAD_MODE_ALL_ZEROES = 2,
- CSID_PAYLOAD_MODE_ALL_ONES = 3,
- CSID_PAYLOAD_MODE_RANDOM = 4,
- CSID_PAYLOAD_MODE_USER_SPECIFIED = 5,
-};
-
-struct csid_testgen_config {
- u8 enabled;
- enum csid_payload_mode payload_mode;
-};
-
-struct csid_phy_config {
- u8 csiphy_id;
- u8 lane_cnt;
- u32 lane_assign;
-};
-
-struct csid_device {
- u8 id;
- struct v4l2_subdev subdev;
- struct media_pad pads[MSM_CSID_PADS_NUM];
- void __iomem *base;
- u32 irq;
- char irq_name[30];
- struct camss_clock *clock;
- int nclocks;
- struct regulator *vdda;
- struct completion reset_complete;
- struct csid_testgen_config testgen;
- struct csid_phy_config phy;
- struct v4l2_mbus_framefmt fmt[MSM_CSID_PADS_NUM];
- struct v4l2_ctrl_handler ctrls;
- struct v4l2_ctrl *testgen_mode;
-};
-
-struct resources;
-
-int msm_csid_subdev_init(struct csid_device *csid,
- const struct resources *res, u8 id);
-
-int msm_csid_register_entity(struct csid_device *csid,
- struct v4l2_device *v4l2_dev);
-
-void msm_csid_unregister_entity(struct csid_device *csid);
-
-void msm_csid_get_csid_id(struct media_entity *entity, u8 *id);
-
-#endif /* QC_MSM_CAMSS_CSID_H */
deleted file mode 100644
@@ -1,893 +0,0 @@
-/*
- * camss-csiphy.c
- *
- * Qualcomm MSM Camera Subsystem - CSIPHY Module
- *
- * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved.
- * Copyright (C) 2016-2017 Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <media/media-entity.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-
-#include "camss-csiphy.h"
-#include "camss.h"
-
-#define MSM_CSIPHY_NAME "msm_csiphy"
-
-#define CAMSS_CSI_PHY_LNn_CFG2(n) (0x004 + 0x40 * (n))
-#define CAMSS_CSI_PHY_LNn_CFG3(n) (0x008 + 0x40 * (n))
-#define CAMSS_CSI_PHY_GLBL_RESET 0x140
-#define CAMSS_CSI_PHY_GLBL_PWR_CFG 0x144
-#define CAMSS_CSI_PHY_GLBL_IRQ_CMD 0x164
-#define CAMSS_CSI_PHY_HW_VERSION 0x188
-#define CAMSS_CSI_PHY_INTERRUPT_STATUSn(n) (0x18c + 0x4 * (n))
-#define CAMSS_CSI_PHY_INTERRUPT_MASKn(n) (0x1ac + 0x4 * (n))
-#define CAMSS_CSI_PHY_INTERRUPT_CLEARn(n) (0x1cc + 0x4 * (n))
-#define CAMSS_CSI_PHY_GLBL_T_INIT_CFG0 0x1ec
-#define CAMSS_CSI_PHY_T_WAKEUP_CFG0 0x1f4
-
-static const struct {
- u32 code;
- u8 bpp;
-} csiphy_formats[] = {
- {
- MEDIA_BUS_FMT_UYVY8_2X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_VYUY8_2X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_YUYV8_2X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_YVYU8_2X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_SBGGR8_1X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_SGBRG8_1X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_SGRBG8_1X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_SRGGB8_1X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_SBGGR10_1X10,
- 10,
- },
- {
- MEDIA_BUS_FMT_SGBRG10_1X10,
- 10,
- },
- {
- MEDIA_BUS_FMT_SGRBG10_1X10,
- 10,
- },
- {
- MEDIA_BUS_FMT_SRGGB10_1X10,
- 10,
- },
- {
- MEDIA_BUS_FMT_SBGGR12_1X12,
- 12,
- },
- {
- MEDIA_BUS_FMT_SGBRG12_1X12,
- 12,
- },
- {
- MEDIA_BUS_FMT_SGRBG12_1X12,
- 12,
- },
- {
- MEDIA_BUS_FMT_SRGGB12_1X12,
- 12,
- }
-};
-
-/*
- * csiphy_get_bpp - map media bus format to bits per pixel
- * @code: media bus format code
- *
- * Return number of bits per pixel
- */
-static u8 csiphy_get_bpp(u32 code)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(csiphy_formats); i++)
- if (code == csiphy_formats[i].code)
- return csiphy_formats[i].bpp;
-
- WARN(1, "Unknown format\n");
-
- return csiphy_formats[0].bpp;
-}
-
-/*
- * csiphy_isr - CSIPHY module interrupt handler
- * @irq: Interrupt line
- * @dev: CSIPHY device
- *
- * Return IRQ_HANDLED on success
- */
-static irqreturn_t csiphy_isr(int irq, void *dev)
-{
- struct csiphy_device *csiphy = dev;
- u8 i;
-
- for (i = 0; i < 8; i++) {
- u8 val = readl_relaxed(csiphy->base +
- CAMSS_CSI_PHY_INTERRUPT_STATUSn(i));
- writel_relaxed(val, csiphy->base +
- CAMSS_CSI_PHY_INTERRUPT_CLEARn(i));
- writel_relaxed(0x1, csiphy->base + CAMSS_CSI_PHY_GLBL_IRQ_CMD);
- writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_IRQ_CMD);
- writel_relaxed(0x0, csiphy->base +
- CAMSS_CSI_PHY_INTERRUPT_CLEARn(i));
- }
-
- return IRQ_HANDLED;
-}
-
-/*
- * csiphy_set_clock_rates - Calculate and set clock rates on CSIPHY module
- * @csiphy: CSIPHY device
- */
-static int csiphy_set_clock_rates(struct csiphy_device *csiphy)
-{
- struct device *dev = to_device_index(csiphy, csiphy->id);
- u32 pixel_clock;
- int i, j;
- int ret;
-
- ret = camss_get_pixel_clock(&csiphy->subdev.entity, &pixel_clock);
- if (ret)
- pixel_clock = 0;
-
- for (i = 0; i < csiphy->nclocks; i++) {
- struct camss_clock *clock = &csiphy->clock[i];
-
- if (!strcmp(clock->name, "csiphy0_timer") ||
- !strcmp(clock->name, "csiphy1_timer")) {
- u8 bpp = csiphy_get_bpp(
- csiphy->fmt[MSM_CSIPHY_PAD_SINK].code);
- u8 num_lanes = csiphy->cfg.csi2->lane_cfg.num_data;
- u64 min_rate = pixel_clock * bpp / (2 * num_lanes * 4);
- long round_rate;
-
- camss_add_clock_margin(&min_rate);
-
- for (j = 0; j < clock->nfreqs; j++)
- if (min_rate < clock->freq[j])
- break;
-
- if (j == clock->nfreqs) {
- dev_err(dev,
- "Pixel clock is too high for CSIPHY\n");
- return -EINVAL;
- }
-
- /* if sensor pixel clock is not available */
- /* set highest possible CSIPHY clock rate */
- if (min_rate == 0)
- j = clock->nfreqs - 1;
-
- round_rate = clk_round_rate(clock->clk, clock->freq[j]);
- if (round_rate < 0) {
- dev_err(dev, "clk round rate failed: %ld\n",
- round_rate);
- return -EINVAL;
- }
-
- csiphy->timer_clk_rate = round_rate;
-
- ret = clk_set_rate(clock->clk, csiphy->timer_clk_rate);
- if (ret < 0) {
- dev_err(dev, "clk set rate failed: %d\n", ret);
- return ret;
- }
- }
- }
-
- return 0;
-}
-
-/*
- * csiphy_reset - Perform software reset on CSIPHY module
- * @csiphy: CSIPHY device
- */
-static void csiphy_reset(struct csiphy_device *csiphy)
-{
- writel_relaxed(0x1, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET);
- usleep_range(5000, 8000);
- writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET);
-}
-
-/*
- * csiphy_set_power - Power on/off CSIPHY module
- * @sd: CSIPHY V4L2 subdevice
- * @on: Requested power state
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int csiphy_set_power(struct v4l2_subdev *sd, int on)
-{
- struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
- struct device *dev = to_device_index(csiphy, csiphy->id);
-
- if (on) {
- u8 hw_version;
- int ret;
-
- ret = csiphy_set_clock_rates(csiphy);
- if (ret < 0)
- return ret;
-
- ret = camss_enable_clocks(csiphy->nclocks, csiphy->clock, dev);
- if (ret < 0)
- return ret;
-
- enable_irq(csiphy->irq);
-
- csiphy_reset(csiphy);
-
- hw_version = readl_relaxed(csiphy->base +
- CAMSS_CSI_PHY_HW_VERSION);
- dev_dbg(dev, "CSIPHY HW Version = 0x%02x\n", hw_version);
- } else {
- disable_irq(csiphy->irq);
-
- camss_disable_clocks(csiphy->nclocks, csiphy->clock);
- }
-
- return 0;
-}
-
-/*
- * csiphy_get_lane_mask - Calculate CSI2 lane mask configuration parameter
- * @lane_cfg - CSI2 lane configuration
- *
- * Return lane mask
- */
-static u8 csiphy_get_lane_mask(struct csiphy_lanes_cfg *lane_cfg)
-{
- u8 lane_mask;
- int i;
-
- lane_mask = 1 << lane_cfg->clk.pos;
-
- for (i = 0; i < lane_cfg->num_data; i++)
- lane_mask |= 1 << lane_cfg->data[i].pos;
-
- return lane_mask;
-}
-
-/*
- * csiphy_settle_cnt_calc - Calculate settle count value
- * @csiphy: CSIPHY device
- *
- * Helper function to calculate settle count value. This is
- * based on the CSI2 T_hs_settle parameter which in turn
- * is calculated based on the CSI2 transmitter pixel clock
- * frequency.
- *
- * Return settle count value or 0 if the CSI2 pixel clock
- * frequency is not available
- */
-static u8 csiphy_settle_cnt_calc(struct csiphy_device *csiphy)
-{
- u8 bpp = csiphy_get_bpp(
- csiphy->fmt[MSM_CSIPHY_PAD_SINK].code);
- u8 num_lanes = csiphy->cfg.csi2->lane_cfg.num_data;
- u32 pixel_clock; /* Hz */
- u32 mipi_clock; /* Hz */
- u32 ui; /* ps */
- u32 timer_period; /* ps */
- u32 t_hs_prepare_max; /* ps */
- u32 t_hs_prepare_zero_min; /* ps */
- u32 t_hs_settle; /* ps */
- u8 settle_cnt;
- int ret;
-
- ret = camss_get_pixel_clock(&csiphy->subdev.entity, &pixel_clock);
- if (ret) {
- dev_err(to_device_index(csiphy, csiphy->id),
- "Cannot get CSI2 transmitter's pixel clock\n");
- return 0;
- }
- if (!pixel_clock) {
- dev_err(to_device_index(csiphy, csiphy->id),
- "Got pixel clock == 0, cannot continue\n");
- return 0;
- }
-
- mipi_clock = pixel_clock * bpp / (2 * num_lanes);
- ui = div_u64(1000000000000LL, mipi_clock);
- ui /= 2;
- t_hs_prepare_max = 85000 + 6 * ui;
- t_hs_prepare_zero_min = 145000 + 10 * ui;
- t_hs_settle = (t_hs_prepare_max + t_hs_prepare_zero_min) / 2;
-
- timer_period = div_u64(1000000000000LL, csiphy->timer_clk_rate);
- settle_cnt = t_hs_settle / timer_period;
-
- return settle_cnt;
-}
-
-/*
- * csiphy_stream_on - Enable streaming on CSIPHY module
- * @csiphy: CSIPHY device
- *
- * Helper function to enable streaming on CSIPHY module.
- * Main configuration of CSIPHY module is also done here.
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int csiphy_stream_on(struct csiphy_device *csiphy)
-{
- struct csiphy_config *cfg = &csiphy->cfg;
- u8 lane_mask = csiphy_get_lane_mask(&cfg->csi2->lane_cfg);
- u8 settle_cnt;
- u8 val;
- int i = 0;
-
- settle_cnt = csiphy_settle_cnt_calc(csiphy);
- if (!settle_cnt)
- return -EINVAL;
-
- val = readl_relaxed(csiphy->base_clk_mux);
- if (cfg->combo_mode && (lane_mask & 0x18) == 0x18) {
- val &= ~0xf0;
- val |= cfg->csid_id << 4;
- } else {
- val &= ~0xf;
- val |= cfg->csid_id;
- }
- writel_relaxed(val, csiphy->base_clk_mux);
-
- writel_relaxed(0x1, csiphy->base +
- CAMSS_CSI_PHY_GLBL_T_INIT_CFG0);
- writel_relaxed(0x1, csiphy->base +
- CAMSS_CSI_PHY_T_WAKEUP_CFG0);
-
- val = 0x1;
- val |= lane_mask << 1;
- writel_relaxed(val, csiphy->base + CAMSS_CSI_PHY_GLBL_PWR_CFG);
-
- val = cfg->combo_mode << 4;
- writel_relaxed(val, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET);
-
- while (lane_mask) {
- if (lane_mask & 0x1) {
- writel_relaxed(0x10, csiphy->base +
- CAMSS_CSI_PHY_LNn_CFG2(i));
- writel_relaxed(settle_cnt, csiphy->base +
- CAMSS_CSI_PHY_LNn_CFG3(i));
- writel_relaxed(0x3f, csiphy->base +
- CAMSS_CSI_PHY_INTERRUPT_MASKn(i));
- writel_relaxed(0x3f, csiphy->base +
- CAMSS_CSI_PHY_INTERRUPT_CLEARn(i));
- }
-
- lane_mask >>= 1;
- i++;
- }
-
- return 0;
-}
-
-/*
- * csiphy_stream_off - Disable streaming on CSIPHY module
- * @csiphy: CSIPHY device
- *
- * Helper function to disable streaming on CSIPHY module
- */
-static void csiphy_stream_off(struct csiphy_device *csiphy)
-{
- u8 lane_mask = csiphy_get_lane_mask(&csiphy->cfg.csi2->lane_cfg);
- int i = 0;
-
- while (lane_mask) {
- if (lane_mask & 0x1)
- writel_relaxed(0x0, csiphy->base +
- CAMSS_CSI_PHY_LNn_CFG2(i));
-
- lane_mask >>= 1;
- i++;
- }
-
- writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_PWR_CFG);
-}
-
-
-/*
- * csiphy_set_stream - Enable/disable streaming on CSIPHY module
- * @sd: CSIPHY V4L2 subdevice
- * @enable: Requested streaming state
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int csiphy_set_stream(struct v4l2_subdev *sd, int enable)
-{
- struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
- int ret = 0;
-
- if (enable)
- ret = csiphy_stream_on(csiphy);
- else
- csiphy_stream_off(csiphy);
-
- return ret;
-}
-
-/*
- * __csiphy_get_format - Get pointer to format structure
- * @csiphy: CSIPHY device
- * @cfg: V4L2 subdev pad configuration
- * @pad: pad from which format is requested
- * @which: TRY or ACTIVE format
- *
- * Return pointer to TRY or ACTIVE format structure
- */
-static struct v4l2_mbus_framefmt *
-__csiphy_get_format(struct csiphy_device *csiphy,
- struct v4l2_subdev_pad_config *cfg,
- unsigned int pad,
- enum v4l2_subdev_format_whence which)
-{
- if (which == V4L2_SUBDEV_FORMAT_TRY)
- return v4l2_subdev_get_try_format(&csiphy->subdev, cfg, pad);
-
- return &csiphy->fmt[pad];
-}
-
-/*
- * csiphy_try_format - Handle try format by pad subdev method
- * @csiphy: CSIPHY device
- * @cfg: V4L2 subdev pad configuration
- * @pad: pad on which format is requested
- * @fmt: pointer to v4l2 format structure
- * @which: wanted subdev format
- */
-static void csiphy_try_format(struct csiphy_device *csiphy,
- struct v4l2_subdev_pad_config *cfg,
- unsigned int pad,
- struct v4l2_mbus_framefmt *fmt,
- enum v4l2_subdev_format_whence which)
-{
- unsigned int i;
-
- switch (pad) {
- case MSM_CSIPHY_PAD_SINK:
- /* Set format on sink pad */
-
- for (i = 0; i < ARRAY_SIZE(csiphy_formats); i++)
- if (fmt->code == csiphy_formats[i].code)
- break;
-
- /* If not found, use UYVY as default */
- if (i >= ARRAY_SIZE(csiphy_formats))
- fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
-
- fmt->width = clamp_t(u32, fmt->width, 1, 8191);
- fmt->height = clamp_t(u32, fmt->height, 1, 8191);
-
- fmt->field = V4L2_FIELD_NONE;
- fmt->colorspace = V4L2_COLORSPACE_SRGB;
-
- break;
-
- case MSM_CSIPHY_PAD_SRC:
- /* Set and return a format same as sink pad */
-
- *fmt = *__csiphy_get_format(csiphy, cfg, MSM_CSID_PAD_SINK,
- which);
-
- break;
- }
-}
-
-/*
- * csiphy_enum_mbus_code - Handle pixel format enumeration
- * @sd: CSIPHY V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @code: pointer to v4l2_subdev_mbus_code_enum structure
- * return -EINVAL or zero on success
- */
-static int csiphy_enum_mbus_code(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_mbus_code_enum *code)
-{
- struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt *format;
-
- if (code->pad == MSM_CSIPHY_PAD_SINK) {
- if (code->index >= ARRAY_SIZE(csiphy_formats))
- return -EINVAL;
-
- code->code = csiphy_formats[code->index].code;
- } else {
- if (code->index > 0)
- return -EINVAL;
-
- format = __csiphy_get_format(csiphy, cfg, MSM_CSIPHY_PAD_SINK,
- code->which);
-
- code->code = format->code;
- }
-
- return 0;
-}
-
-/*
- * csiphy_enum_frame_size - Handle frame size enumeration
- * @sd: CSIPHY V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @fse: pointer to v4l2_subdev_frame_size_enum structure
- * return -EINVAL or zero on success
- */
-static int csiphy_enum_frame_size(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_frame_size_enum *fse)
-{
- struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt format;
-
- if (fse->index != 0)
- return -EINVAL;
-
- format.code = fse->code;
- format.width = 1;
- format.height = 1;
- csiphy_try_format(csiphy, cfg, fse->pad, &format, fse->which);
- fse->min_width = format.width;
- fse->min_height = format.height;
-
- if (format.code != fse->code)
- return -EINVAL;
-
- format.code = fse->code;
- format.width = -1;
- format.height = -1;
- csiphy_try_format(csiphy, cfg, fse->pad, &format, fse->which);
- fse->max_width = format.width;
- fse->max_height = format.height;
-
- return 0;
-}
-
-/*
- * csiphy_get_format - Handle get format by pads subdev method
- * @sd: CSIPHY V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @fmt: pointer to v4l2 subdev format structure
- *
- * Return -EINVAL or zero on success
- */
-static int csiphy_get_format(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *fmt)
-{
- struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt *format;
-
- format = __csiphy_get_format(csiphy, cfg, fmt->pad, fmt->which);
- if (format == NULL)
- return -EINVAL;
-
- fmt->format = *format;
-
- return 0;
-}
-
-/*
- * csiphy_set_format - Handle set format by pads subdev method
- * @sd: CSIPHY V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @fmt: pointer to v4l2 subdev format structure
- *
- * Return -EINVAL or zero on success
- */
-static int csiphy_set_format(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *fmt)
-{
- struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt *format;
-
- format = __csiphy_get_format(csiphy, cfg, fmt->pad, fmt->which);
- if (format == NULL)
- return -EINVAL;
-
- csiphy_try_format(csiphy, cfg, fmt->pad, &fmt->format, fmt->which);
- *format = fmt->format;
-
- /* Propagate the format from sink to source */
- if (fmt->pad == MSM_CSIPHY_PAD_SINK) {
- format = __csiphy_get_format(csiphy, cfg, MSM_CSIPHY_PAD_SRC,
- fmt->which);
-
- *format = fmt->format;
- csiphy_try_format(csiphy, cfg, MSM_CSIPHY_PAD_SRC, format,
- fmt->which);
- }
-
- return 0;
-}
-
-/*
- * csiphy_init_formats - Initialize formats on all pads
- * @sd: CSIPHY V4L2 subdevice
- * @fh: V4L2 subdev file handle
- *
- * Initialize all pad formats with default values.
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int csiphy_init_formats(struct v4l2_subdev *sd,
- struct v4l2_subdev_fh *fh)
-{
- struct v4l2_subdev_format format = {
- .pad = MSM_CSIPHY_PAD_SINK,
- .which = fh ? V4L2_SUBDEV_FORMAT_TRY :
- V4L2_SUBDEV_FORMAT_ACTIVE,
- .format = {
- .code = MEDIA_BUS_FMT_UYVY8_2X8,
- .width = 1920,
- .height = 1080
- }
- };
-
- return csiphy_set_format(sd, fh ? fh->pad : NULL, &format);
-}
-
-/*
- * msm_csiphy_subdev_init - Initialize CSIPHY device structure and resources
- * @csiphy: CSIPHY device
- * @res: CSIPHY module resources table
- * @id: CSIPHY module id
- *
- * Return 0 on success or a negative error code otherwise
- */
-int msm_csiphy_subdev_init(struct csiphy_device *csiphy,
- const struct resources *res, u8 id)
-{
- struct device *dev = to_device_index(csiphy, id);
- struct platform_device *pdev = to_platform_device(dev);
- struct resource *r;
- int i, j;
- int ret;
-
- csiphy->id = id;
- csiphy->cfg.combo_mode = 0;
-
- /* Memory */
-
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[0]);
- csiphy->base = devm_ioremap_resource(dev, r);
- if (IS_ERR(csiphy->base)) {
- dev_err(dev, "could not map memory\n");
- return PTR_ERR(csiphy->base);
- }
-
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[1]);
- csiphy->base_clk_mux = devm_ioremap_resource(dev, r);
- if (IS_ERR(csiphy->base_clk_mux)) {
- dev_err(dev, "could not map memory\n");
- return PTR_ERR(csiphy->base_clk_mux);
- }
-
- /* Interrupt */
-
- r = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
- res->interrupt[0]);
- if (!r) {
- dev_err(dev, "missing IRQ\n");
- return -EINVAL;
- }
-
- csiphy->irq = r->start;
- snprintf(csiphy->irq_name, sizeof(csiphy->irq_name), "%s_%s%d",
- dev_name(dev), MSM_CSIPHY_NAME, csiphy->id);
- ret = devm_request_irq(dev, csiphy->irq, csiphy_isr,
- IRQF_TRIGGER_RISING, csiphy->irq_name, csiphy);
- if (ret < 0) {
- dev_err(dev, "request_irq failed: %d\n", ret);
- return ret;
- }
-
- disable_irq(csiphy->irq);
-
- /* Clocks */
-
- csiphy->nclocks = 0;
- while (res->clock[csiphy->nclocks])
- csiphy->nclocks++;
-
- csiphy->clock = devm_kcalloc(dev,
- csiphy->nclocks, sizeof(*csiphy->clock),
- GFP_KERNEL);
- if (!csiphy->clock)
- return -ENOMEM;
-
- for (i = 0; i < csiphy->nclocks; i++) {
- struct camss_clock *clock = &csiphy->clock[i];
-
- clock->clk = devm_clk_get(dev, res->clock[i]);
- if (IS_ERR(clock->clk))
- return PTR_ERR(clock->clk);
-
- clock->name = res->clock[i];
-
- clock->nfreqs = 0;
- while (res->clock_rate[i][clock->nfreqs])
- clock->nfreqs++;
-
- if (!clock->nfreqs) {
- clock->freq = NULL;
- continue;
- }
-
- clock->freq = devm_kcalloc(dev,
- clock->nfreqs,
- sizeof(*clock->freq),
- GFP_KERNEL);
- if (!clock->freq)
- return -ENOMEM;
-
- for (j = 0; j < clock->nfreqs; j++)
- clock->freq[j] = res->clock_rate[i][j];
- }
-
- return 0;
-}
-
-/*
- * csiphy_link_setup - Setup CSIPHY connections
- * @entity: Pointer to media entity structure
- * @local: Pointer to local pad
- * @remote: Pointer to remote pad
- * @flags: Link flags
- *
- * Rreturn 0 on success
- */
-static int csiphy_link_setup(struct media_entity *entity,
- const struct media_pad *local,
- const struct media_pad *remote, u32 flags)
-{
- if ((local->flags & MEDIA_PAD_FL_SOURCE) &&
- (flags & MEDIA_LNK_FL_ENABLED)) {
- struct v4l2_subdev *sd;
- struct csiphy_device *csiphy;
- struct csid_device *csid;
-
- if (media_entity_remote_pad(local))
- return -EBUSY;
-
- sd = media_entity_to_v4l2_subdev(entity);
- csiphy = v4l2_get_subdevdata(sd);
-
- sd = media_entity_to_v4l2_subdev(remote->entity);
- csid = v4l2_get_subdevdata(sd);
-
- csiphy->cfg.csid_id = csid->id;
- }
-
- return 0;
-}
-
-static const struct v4l2_subdev_core_ops csiphy_core_ops = {
- .s_power = csiphy_set_power,
-};
-
-static const struct v4l2_subdev_video_ops csiphy_video_ops = {
- .s_stream = csiphy_set_stream,
-};
-
-static const struct v4l2_subdev_pad_ops csiphy_pad_ops = {
- .enum_mbus_code = csiphy_enum_mbus_code,
- .enum_frame_size = csiphy_enum_frame_size,
- .get_fmt = csiphy_get_format,
- .set_fmt = csiphy_set_format,
-};
-
-static const struct v4l2_subdev_ops csiphy_v4l2_ops = {
- .core = &csiphy_core_ops,
- .video = &csiphy_video_ops,
- .pad = &csiphy_pad_ops,
-};
-
-static const struct v4l2_subdev_internal_ops csiphy_v4l2_internal_ops = {
- .open = csiphy_init_formats,
-};
-
-static const struct media_entity_operations csiphy_media_ops = {
- .link_setup = csiphy_link_setup,
- .link_validate = v4l2_subdev_link_validate,
-};
-
-/*
- * msm_csiphy_register_entity - Register subdev node for CSIPHY module
- * @csiphy: CSIPHY device
- * @v4l2_dev: V4L2 device
- *
- * Return 0 on success or a negative error code otherwise
- */
-int msm_csiphy_register_entity(struct csiphy_device *csiphy,
- struct v4l2_device *v4l2_dev)
-{
- struct v4l2_subdev *sd = &csiphy->subdev;
- struct media_pad *pads = csiphy->pads;
- struct device *dev = to_device_index(csiphy, csiphy->id);
- int ret;
-
- v4l2_subdev_init(sd, &csiphy_v4l2_ops);
- sd->internal_ops = &csiphy_v4l2_internal_ops;
- sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
- snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d",
- MSM_CSIPHY_NAME, csiphy->id);
- v4l2_set_subdevdata(sd, csiphy);
-
- ret = csiphy_init_formats(sd, NULL);
- if (ret < 0) {
- dev_err(dev, "Failed to init format: %d\n", ret);
- return ret;
- }
-
- pads[MSM_CSIPHY_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
- pads[MSM_CSIPHY_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
-
- sd->entity.function = MEDIA_ENT_F_IO_V4L;
- sd->entity.ops = &csiphy_media_ops;
- ret = media_entity_pads_init(&sd->entity, MSM_CSIPHY_PADS_NUM, pads);
- if (ret < 0) {
- dev_err(dev, "Failed to init media entity: %d\n", ret);
- return ret;
- }
-
- ret = v4l2_device_register_subdev(v4l2_dev, sd);
- if (ret < 0) {
- dev_err(dev, "Failed to register subdev: %d\n", ret);
- media_entity_cleanup(&sd->entity);
- }
-
- return ret;
-}
-
-/*
- * msm_csiphy_unregister_entity - Unregister CSIPHY module subdev node
- * @csiphy: CSIPHY device
- */
-void msm_csiphy_unregister_entity(struct csiphy_device *csiphy)
-{
- v4l2_device_unregister_subdev(&csiphy->subdev);
- media_entity_cleanup(&csiphy->subdev.entity);
-}
deleted file mode 100644
@@ -1,77 +0,0 @@
-/*
- * camss-csiphy.h
- *
- * Qualcomm MSM Camera Subsystem - CSIPHY Module
- *
- * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved.
- * Copyright (C) 2016-2017 Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef QC_MSM_CAMSS_CSIPHY_H
-#define QC_MSM_CAMSS_CSIPHY_H
-
-#include <linux/clk.h>
-#include <media/media-entity.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-mediabus.h>
-#include <media/v4l2-subdev.h>
-
-#define MSM_CSIPHY_PAD_SINK 0
-#define MSM_CSIPHY_PAD_SRC 1
-#define MSM_CSIPHY_PADS_NUM 2
-
-struct csiphy_lane {
- u8 pos;
- u8 pol;
-};
-
-struct csiphy_lanes_cfg {
- int num_data;
- struct csiphy_lane *data;
- struct csiphy_lane clk;
-};
-
-struct csiphy_csi2_cfg {
- struct csiphy_lanes_cfg lane_cfg;
-};
-
-struct csiphy_config {
- u8 combo_mode;
- u8 csid_id;
- struct csiphy_csi2_cfg *csi2;
-};
-
-struct csiphy_device {
- u8 id;
- struct v4l2_subdev subdev;
- struct media_pad pads[MSM_CSIPHY_PADS_NUM];
- void __iomem *base;
- void __iomem *base_clk_mux;
- u32 irq;
- char irq_name[30];
- struct camss_clock *clock;
- int nclocks;
- u32 timer_clk_rate;
- struct csiphy_config cfg;
- struct v4l2_mbus_framefmt fmt[MSM_CSIPHY_PADS_NUM];
-};
-
-struct resources;
-
-int msm_csiphy_subdev_init(struct csiphy_device *csiphy,
- const struct resources *res, u8 id);
-
-int msm_csiphy_register_entity(struct csiphy_device *csiphy,
- struct v4l2_device *v4l2_dev);
-
-void msm_csiphy_unregister_entity(struct csiphy_device *csiphy);
-
-#endif /* QC_MSM_CAMSS_CSIPHY_H */
deleted file mode 100644
@@ -1,1178 +0,0 @@
-/*
- * camss-ispif.c
- *
- * Qualcomm MSM Camera Subsystem - ISPIF (ISP Interface) Module
- *
- * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
- * Copyright (C) 2015-2017 Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/clk.h>
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-#include <linux/iopoll.h>
-#include <linux/kernel.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <media/media-entity.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-
-#include "camss-ispif.h"
-#include "camss.h"
-
-#define MSM_ISPIF_NAME "msm_ispif"
-
-#define ispif_line_array(ptr_line) \
- ((const struct ispif_line (*)[]) &(ptr_line[-(ptr_line->id)]))
-
-#define to_ispif(ptr_line) \
- container_of(ispif_line_array(ptr_line), struct ispif_device, ptr_line)
-
-#define ISPIF_RST_CMD_0 0x008
-#define ISPIF_RST_CMD_0_STROBED_RST_EN (1 << 0)
-#define ISPIF_RST_CMD_0_MISC_LOGIC_RST (1 << 1)
-#define ISPIF_RST_CMD_0_SW_REG_RST (1 << 2)
-#define ISPIF_RST_CMD_0_PIX_INTF_0_CSID_RST (1 << 3)
-#define ISPIF_RST_CMD_0_PIX_INTF_0_VFE_RST (1 << 4)
-#define ISPIF_RST_CMD_0_PIX_INTF_1_CSID_RST (1 << 5)
-#define ISPIF_RST_CMD_0_PIX_INTF_1_VFE_RST (1 << 6)
-#define ISPIF_RST_CMD_0_RDI_INTF_0_CSID_RST (1 << 7)
-#define ISPIF_RST_CMD_0_RDI_INTF_0_VFE_RST (1 << 8)
-#define ISPIF_RST_CMD_0_RDI_INTF_1_CSID_RST (1 << 9)
-#define ISPIF_RST_CMD_0_RDI_INTF_1_VFE_RST (1 << 10)
-#define ISPIF_RST_CMD_0_RDI_INTF_2_CSID_RST (1 << 11)
-#define ISPIF_RST_CMD_0_RDI_INTF_2_VFE_RST (1 << 12)
-#define ISPIF_RST_CMD_0_PIX_OUTPUT_0_MISR_RST (1 << 16)
-#define ISPIF_RST_CMD_0_RDI_OUTPUT_0_MISR_RST (1 << 17)
-#define ISPIF_RST_CMD_0_RDI_OUTPUT_1_MISR_RST (1 << 18)
-#define ISPIF_RST_CMD_0_RDI_OUTPUT_2_MISR_RST (1 << 19)
-#define ISPIF_IRQ_GLOBAL_CLEAR_CMD 0x01c
-#define ISPIF_VFE_m_CTRL_0(m) (0x200 + 0x200 * (m))
-#define ISPIF_VFE_m_CTRL_0_PIX0_LINE_BUF_EN (1 << 6)
-#define ISPIF_VFE_m_IRQ_MASK_0(m) (0x208 + 0x200 * (m))
-#define ISPIF_VFE_m_IRQ_MASK_0_PIX0_ENABLE 0x00001249
-#define ISPIF_VFE_m_IRQ_MASK_0_PIX0_MASK 0x00001fff
-#define ISPIF_VFE_m_IRQ_MASK_0_RDI0_ENABLE 0x02492000
-#define ISPIF_VFE_m_IRQ_MASK_0_RDI0_MASK 0x03ffe000
-#define ISPIF_VFE_m_IRQ_MASK_1(m) (0x20c + 0x200 * (m))
-#define ISPIF_VFE_m_IRQ_MASK_1_PIX1_ENABLE 0x00001249
-#define ISPIF_VFE_m_IRQ_MASK_1_PIX1_MASK 0x00001fff
-#define ISPIF_VFE_m_IRQ_MASK_1_RDI1_ENABLE 0x02492000
-#define ISPIF_VFE_m_IRQ_MASK_1_RDI1_MASK 0x03ffe000
-#define ISPIF_VFE_m_IRQ_MASK_2(m) (0x210 + 0x200 * (m))
-#define ISPIF_VFE_m_IRQ_MASK_2_RDI2_ENABLE 0x00001249
-#define ISPIF_VFE_m_IRQ_MASK_2_RDI2_MASK 0x00001fff
-#define ISPIF_VFE_m_IRQ_STATUS_0(m) (0x21c + 0x200 * (m))
-#define ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW (1 << 12)
-#define ISPIF_VFE_m_IRQ_STATUS_0_RDI0_OVERFLOW (1 << 25)
-#define ISPIF_VFE_m_IRQ_STATUS_1(m) (0x220 + 0x200 * (m))
-#define ISPIF_VFE_m_IRQ_STATUS_1_PIX1_OVERFLOW (1 << 12)
-#define ISPIF_VFE_m_IRQ_STATUS_1_RDI1_OVERFLOW (1 << 25)
-#define ISPIF_VFE_m_IRQ_STATUS_2(m) (0x224 + 0x200 * (m))
-#define ISPIF_VFE_m_IRQ_STATUS_2_RDI2_OVERFLOW (1 << 12)
-#define ISPIF_VFE_m_IRQ_CLEAR_0(m) (0x230 + 0x200 * (m))
-#define ISPIF_VFE_m_IRQ_CLEAR_1(m) (0x234 + 0x200 * (m))
-#define ISPIF_VFE_m_IRQ_CLEAR_2(m) (0x238 + 0x200 * (m))
-#define ISPIF_VFE_m_INTF_INPUT_SEL(m) (0x244 + 0x200 * (m))
-#define ISPIF_VFE_m_INTF_CMD_0(m) (0x248 + 0x200 * (m))
-#define ISPIF_VFE_m_INTF_CMD_1(m) (0x24c + 0x200 * (m))
-#define ISPIF_VFE_m_PIX_INTF_n_CID_MASK(m, n) \
- (0x254 + 0x200 * (m) + 0x4 * (n))
-#define ISPIF_VFE_m_RDI_INTF_n_CID_MASK(m, n) \
- (0x264 + 0x200 * (m) + 0x4 * (n))
-#define ISPIF_VFE_m_PIX_INTF_n_STATUS(m, n) \
- (0x2c0 + 0x200 * (m) + 0x4 * (n))
-#define ISPIF_VFE_m_RDI_INTF_n_STATUS(m, n) \
- (0x2d0 + 0x200 * (m) + 0x4 * (n))
-
-#define CSI_PIX_CLK_MUX_SEL 0x000
-#define CSI_RDI_CLK_MUX_SEL 0x008
-
-#define ISPIF_TIMEOUT_SLEEP_US 1000
-#define ISPIF_TIMEOUT_ALL_US 1000000
-#define ISPIF_RESET_TIMEOUT_MS 500
-
-enum ispif_intf_cmd {
- CMD_DISABLE_FRAME_BOUNDARY = 0x0,
- CMD_ENABLE_FRAME_BOUNDARY = 0x1,
- CMD_DISABLE_IMMEDIATELY = 0x2,
- CMD_ALL_DISABLE_IMMEDIATELY = 0xaaaaaaaa,
- CMD_ALL_NO_CHANGE = 0xffffffff,
-};
-
-static const u32 ispif_formats[] = {
- MEDIA_BUS_FMT_UYVY8_2X8,
- MEDIA_BUS_FMT_VYUY8_2X8,
- MEDIA_BUS_FMT_YUYV8_2X8,
- MEDIA_BUS_FMT_YVYU8_2X8,
- MEDIA_BUS_FMT_SBGGR8_1X8,
- MEDIA_BUS_FMT_SGBRG8_1X8,
- MEDIA_BUS_FMT_SGRBG8_1X8,
- MEDIA_BUS_FMT_SRGGB8_1X8,
- MEDIA_BUS_FMT_SBGGR10_1X10,
- MEDIA_BUS_FMT_SGBRG10_1X10,
- MEDIA_BUS_FMT_SGRBG10_1X10,
- MEDIA_BUS_FMT_SRGGB10_1X10,
- MEDIA_BUS_FMT_SBGGR12_1X12,
- MEDIA_BUS_FMT_SGBRG12_1X12,
- MEDIA_BUS_FMT_SGRBG12_1X12,
- MEDIA_BUS_FMT_SRGGB12_1X12,
-};
-
-/*
- * ispif_isr - ISPIF module interrupt handler
- * @irq: Interrupt line
- * @dev: ISPIF device
- *
- * Return IRQ_HANDLED on success
- */
-static irqreturn_t ispif_isr(int irq, void *dev)
-{
- struct ispif_device *ispif = dev;
- u32 value0, value1, value2;
-
- value0 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_0(0));
- value1 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_1(0));
- value2 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_2(0));
-
- writel_relaxed(value0, ispif->base + ISPIF_VFE_m_IRQ_CLEAR_0(0));
- writel_relaxed(value1, ispif->base + ISPIF_VFE_m_IRQ_CLEAR_1(0));
- writel_relaxed(value2, ispif->base + ISPIF_VFE_m_IRQ_CLEAR_2(0));
-
- writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
-
- if ((value0 >> 27) & 0x1)
- complete(&ispif->reset_complete);
-
- if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
-
- if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_RDI0_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE0 rdi0 overflow\n");
-
- if (unlikely(value1 & ISPIF_VFE_m_IRQ_STATUS_1_PIX1_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE0 pix1 overflow\n");
-
- if (unlikely(value1 & ISPIF_VFE_m_IRQ_STATUS_1_RDI1_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE0 rdi1 overflow\n");
-
- if (unlikely(value2 & ISPIF_VFE_m_IRQ_STATUS_2_RDI2_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE0 rdi2 overflow\n");
-
- return IRQ_HANDLED;
-}
-
-/*
- * ispif_reset - Trigger reset on ISPIF module and wait to complete
- * @ispif: ISPIF device
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int ispif_reset(struct ispif_device *ispif)
-{
- unsigned long time;
- u32 val;
- int ret;
-
- ret = camss_enable_clocks(ispif->nclocks_for_reset,
- ispif->clock_for_reset,
- to_device(ispif));
- if (ret < 0)
- return ret;
-
- reinit_completion(&ispif->reset_complete);
-
- val = ISPIF_RST_CMD_0_STROBED_RST_EN |
- ISPIF_RST_CMD_0_MISC_LOGIC_RST |
- ISPIF_RST_CMD_0_SW_REG_RST |
- ISPIF_RST_CMD_0_PIX_INTF_0_CSID_RST |
- ISPIF_RST_CMD_0_PIX_INTF_0_VFE_RST |
- ISPIF_RST_CMD_0_PIX_INTF_1_CSID_RST |
- ISPIF_RST_CMD_0_PIX_INTF_1_VFE_RST |
- ISPIF_RST_CMD_0_RDI_INTF_0_CSID_RST |
- ISPIF_RST_CMD_0_RDI_INTF_0_VFE_RST |
- ISPIF_RST_CMD_0_RDI_INTF_1_CSID_RST |
- ISPIF_RST_CMD_0_RDI_INTF_1_VFE_RST |
- ISPIF_RST_CMD_0_RDI_INTF_2_CSID_RST |
- ISPIF_RST_CMD_0_RDI_INTF_2_VFE_RST |
- ISPIF_RST_CMD_0_PIX_OUTPUT_0_MISR_RST |
- ISPIF_RST_CMD_0_RDI_OUTPUT_0_MISR_RST |
- ISPIF_RST_CMD_0_RDI_OUTPUT_1_MISR_RST |
- ISPIF_RST_CMD_0_RDI_OUTPUT_2_MISR_RST;
-
- writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
-
- time = wait_for_completion_timeout(&ispif->reset_complete,
- msecs_to_jiffies(ISPIF_RESET_TIMEOUT_MS));
- if (!time) {
- dev_err(to_device(ispif), "ISPIF reset timeout\n");
- return -EIO;
- }
-
- camss_disable_clocks(ispif->nclocks_for_reset, ispif->clock_for_reset);
-
- return 0;
-}
-
-/*
- * ispif_set_power - Power on/off ISPIF module
- * @sd: ISPIF V4L2 subdevice
- * @on: Requested power state
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int ispif_set_power(struct v4l2_subdev *sd, int on)
-{
- struct ispif_line *line = v4l2_get_subdevdata(sd);
- struct ispif_device *ispif = to_ispif(line);
- struct device *dev = to_device(ispif);
- int ret = 0;
-
- mutex_lock(&ispif->power_lock);
-
- if (on) {
- if (ispif->power_count) {
- /* Power is already on */
- ispif->power_count++;
- goto exit;
- }
-
- ret = camss_enable_clocks(ispif->nclocks, ispif->clock, dev);
- if (ret < 0)
- goto exit;
-
- ret = ispif_reset(ispif);
- if (ret < 0) {
- camss_disable_clocks(ispif->nclocks, ispif->clock);
- goto exit;
- }
-
- ispif->intf_cmd[line->vfe_id].cmd_0 = CMD_ALL_NO_CHANGE;
- ispif->intf_cmd[line->vfe_id].cmd_1 = CMD_ALL_NO_CHANGE;
-
- ispif->power_count++;
- } else {
- if (ispif->power_count == 0) {
- dev_err(dev, "ispif power off on power_count == 0\n");
- goto exit;
- } else if (ispif->power_count == 1) {
- camss_disable_clocks(ispif->nclocks, ispif->clock);
- }
-
- ispif->power_count--;
- }
-
-exit:
- mutex_unlock(&ispif->power_lock);
-
- return ret;
-}
-
-/*
- * ispif_select_clk_mux - Select clock for PIX/RDI interface
- * @ispif: ISPIF device
- * @intf: VFE interface
- * @csid: CSID HW module id
- * @vfe: VFE HW module id
- * @enable: enable or disable the selected clock
- */
-static void ispif_select_clk_mux(struct ispif_device *ispif,
- enum ispif_intf intf, u8 csid,
- u8 vfe, u8 enable)
-{
- u32 val;
-
- switch (intf) {
- case PIX0:
- val = readl_relaxed(ispif->base_clk_mux + CSI_PIX_CLK_MUX_SEL);
- val &= ~(0xf << (vfe * 8));
- if (enable)
- val |= (csid << (vfe * 8));
- writel_relaxed(val, ispif->base_clk_mux + CSI_PIX_CLK_MUX_SEL);
- break;
-
- case RDI0:
- val = readl_relaxed(ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
- val &= ~(0xf << (vfe * 12));
- if (enable)
- val |= (csid << (vfe * 12));
- writel_relaxed(val, ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
- break;
-
- case PIX1:
- val = readl_relaxed(ispif->base_clk_mux + CSI_PIX_CLK_MUX_SEL);
- val &= ~(0xf << (4 + (vfe * 8)));
- if (enable)
- val |= (csid << (4 + (vfe * 8)));
- writel_relaxed(val, ispif->base_clk_mux + CSI_PIX_CLK_MUX_SEL);
- break;
-
- case RDI1:
- val = readl_relaxed(ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
- val &= ~(0xf << (4 + (vfe * 12)));
- if (enable)
- val |= (csid << (4 + (vfe * 12)));
- writel_relaxed(val, ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
- break;
-
- case RDI2:
- val = readl_relaxed(ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
- val &= ~(0xf << (8 + (vfe * 12)));
- if (enable)
- val |= (csid << (8 + (vfe * 12)));
- writel_relaxed(val, ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
- break;
- }
-
- mb();
-}
-
-/*
- * ispif_validate_intf_status - Validate current status of PIX/RDI interface
- * @ispif: ISPIF device
- * @intf: VFE interface
- * @vfe: VFE HW module id
- *
- * Return 0 when interface is idle or -EBUSY otherwise
- */
-static int ispif_validate_intf_status(struct ispif_device *ispif,
- enum ispif_intf intf, u8 vfe)
-{
- int ret = 0;
- u32 val = 0;
-
- switch (intf) {
- case PIX0:
- val = readl_relaxed(ispif->base +
- ISPIF_VFE_m_PIX_INTF_n_STATUS(vfe, 0));
- break;
- case RDI0:
- val = readl_relaxed(ispif->base +
- ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 0));
- break;
- case PIX1:
- val = readl_relaxed(ispif->base +
- ISPIF_VFE_m_PIX_INTF_n_STATUS(vfe, 1));
- break;
- case RDI1:
- val = readl_relaxed(ispif->base +
- ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 1));
- break;
- case RDI2:
- val = readl_relaxed(ispif->base +
- ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 2));
- break;
- }
-
- if ((val & 0xf) != 0xf) {
- dev_err(to_device(ispif), "%s: ispif is busy: 0x%x\n",
- __func__, val);
- ret = -EBUSY;
- }
-
- return ret;
-}
-
-/*
- * ispif_wait_for_stop - Wait for PIX/RDI interface to stop
- * @ispif: ISPIF device
- * @intf: VFE interface
- * @vfe: VFE HW module id
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int ispif_wait_for_stop(struct ispif_device *ispif,
- enum ispif_intf intf, u8 vfe)
-{
- u32 addr = 0;
- u32 stop_flag = 0;
- int ret;
-
- switch (intf) {
- case PIX0:
- addr = ISPIF_VFE_m_PIX_INTF_n_STATUS(vfe, 0);
- break;
- case RDI0:
- addr = ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 0);
- break;
- case PIX1:
- addr = ISPIF_VFE_m_PIX_INTF_n_STATUS(vfe, 1);
- break;
- case RDI1:
- addr = ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 1);
- break;
- case RDI2:
- addr = ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 2);
- break;
- }
-
- ret = readl_poll_timeout(ispif->base + addr,
- stop_flag,
- (stop_flag & 0xf) == 0xf,
- ISPIF_TIMEOUT_SLEEP_US,
- ISPIF_TIMEOUT_ALL_US);
- if (ret < 0)
- dev_err(to_device(ispif), "%s: ispif stop timeout\n",
- __func__);
-
- return ret;
-}
-
-/*
- * ispif_select_csid - Select CSID HW module for input from
- * @ispif: ISPIF device
- * @intf: VFE interface
- * @csid: CSID HW module id
- * @vfe: VFE HW module id
- * @enable: enable or disable the selected input
- */
-static void ispif_select_csid(struct ispif_device *ispif, enum ispif_intf intf,
- u8 csid, u8 vfe, u8 enable)
-{
- u32 val;
-
- val = readl_relaxed(ispif->base + ISPIF_VFE_m_INTF_INPUT_SEL(vfe));
- switch (intf) {
- case PIX0:
- val &= ~(BIT(1) | BIT(0));
- if (enable)
- val |= csid;
- break;
- case RDI0:
- val &= ~(BIT(5) | BIT(4));
- if (enable)
- val |= (csid << 4);
- break;
- case PIX1:
- val &= ~(BIT(9) | BIT(8));
- if (enable)
- val |= (csid << 8);
- break;
- case RDI1:
- val &= ~(BIT(13) | BIT(12));
- if (enable)
- val |= (csid << 12);
- break;
- case RDI2:
- val &= ~(BIT(21) | BIT(20));
- if (enable)
- val |= (csid << 20);
- break;
- }
-
- writel(val, ispif->base + ISPIF_VFE_m_INTF_INPUT_SEL(vfe));
-}
-
-/*
- * ispif_select_cid - Enable/disable desired CID
- * @ispif: ISPIF device
- * @intf: VFE interface
- * @cid: desired CID to enable/disable
- * @vfe: VFE HW module id
- * @enable: enable or disable the desired CID
- */
-static void ispif_select_cid(struct ispif_device *ispif, enum ispif_intf intf,
- u8 cid, u8 vfe, u8 enable)
-{
- u32 cid_mask = 1 << cid;
- u32 addr = 0;
- u32 val;
-
- switch (intf) {
- case PIX0:
- addr = ISPIF_VFE_m_PIX_INTF_n_CID_MASK(vfe, 0);
- break;
- case RDI0:
- addr = ISPIF_VFE_m_RDI_INTF_n_CID_MASK(vfe, 0);
- break;
- case PIX1:
- addr = ISPIF_VFE_m_PIX_INTF_n_CID_MASK(vfe, 1);
- break;
- case RDI1:
- addr = ISPIF_VFE_m_RDI_INTF_n_CID_MASK(vfe, 1);
- break;
- case RDI2:
- addr = ISPIF_VFE_m_RDI_INTF_n_CID_MASK(vfe, 2);
- break;
- }
-
- val = readl_relaxed(ispif->base + addr);
- if (enable)
- val |= cid_mask;
- else
- val &= ~cid_mask;
-
- writel(val, ispif->base + addr);
-}
-
-/*
- * ispif_config_irq - Enable/disable interrupts for PIX/RDI interface
- * @ispif: ISPIF device
- * @intf: VFE interface
- * @vfe: VFE HW module id
- * @enable: enable or disable
- */
-static void ispif_config_irq(struct ispif_device *ispif, enum ispif_intf intf,
- u8 vfe, u8 enable)
-{
- u32 val;
-
- switch (intf) {
- case PIX0:
- val = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_MASK_0(vfe));
- val &= ~ISPIF_VFE_m_IRQ_MASK_0_PIX0_MASK;
- if (enable)
- val |= ISPIF_VFE_m_IRQ_MASK_0_PIX0_ENABLE;
- writel_relaxed(val, ispif->base + ISPIF_VFE_m_IRQ_MASK_0(vfe));
- writel_relaxed(ISPIF_VFE_m_IRQ_MASK_0_PIX0_ENABLE,
- ispif->base + ISPIF_VFE_m_IRQ_CLEAR_0(vfe));
- break;
- case RDI0:
- val = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_MASK_0(vfe));
- val &= ~ISPIF_VFE_m_IRQ_MASK_0_RDI0_MASK;
- if (enable)
- val |= ISPIF_VFE_m_IRQ_MASK_0_RDI0_ENABLE;
- writel_relaxed(val, ispif->base + ISPIF_VFE_m_IRQ_MASK_0(vfe));
- writel_relaxed(ISPIF_VFE_m_IRQ_MASK_0_RDI0_ENABLE,
- ispif->base + ISPIF_VFE_m_IRQ_CLEAR_0(vfe));
- break;
- case PIX1:
- val = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_MASK_1(vfe));
- val &= ~ISPIF_VFE_m_IRQ_MASK_1_PIX1_MASK;
- if (enable)
- val |= ISPIF_VFE_m_IRQ_MASK_1_PIX1_ENABLE;
- writel_relaxed(val, ispif->base + ISPIF_VFE_m_IRQ_MASK_1(vfe));
- writel_relaxed(ISPIF_VFE_m_IRQ_MASK_1_PIX1_ENABLE,
- ispif->base + ISPIF_VFE_m_IRQ_CLEAR_1(vfe));
- break;
- case RDI1:
- val = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_MASK_1(vfe));
- val &= ~ISPIF_VFE_m_IRQ_MASK_1_RDI1_MASK;
- if (enable)
- val |= ISPIF_VFE_m_IRQ_MASK_1_RDI1_ENABLE;
- writel_relaxed(val, ispif->base + ISPIF_VFE_m_IRQ_MASK_1(vfe));
- writel_relaxed(ISPIF_VFE_m_IRQ_MASK_1_RDI1_ENABLE,
- ispif->base + ISPIF_VFE_m_IRQ_CLEAR_1(vfe));
- break;
- case RDI2:
- val = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_MASK_2(vfe));
- val &= ~ISPIF_VFE_m_IRQ_MASK_2_RDI2_MASK;
- if (enable)
- val |= ISPIF_VFE_m_IRQ_MASK_2_RDI2_ENABLE;
- writel_relaxed(val, ispif->base + ISPIF_VFE_m_IRQ_MASK_2(vfe));
- writel_relaxed(ISPIF_VFE_m_IRQ_MASK_2_RDI2_ENABLE,
- ispif->base + ISPIF_VFE_m_IRQ_CLEAR_2(vfe));
- break;
- }
-
- writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
-}
-
-/*
- * ispif_set_intf_cmd - Set command to enable/disable interface
- * @ispif: ISPIF device
- * @cmd: interface command
- * @intf: VFE interface
- * @vfe: VFE HW module id
- * @vc: virtual channel
- */
-static void ispif_set_intf_cmd(struct ispif_device *ispif, u8 cmd,
- enum ispif_intf intf, u8 vfe, u8 vc)
-{
- u32 *val;
-
- if (intf == RDI2) {
- val = &ispif->intf_cmd[vfe].cmd_1;
- *val &= ~(0x3 << (vc * 2 + 8));
- *val |= (cmd << (vc * 2 + 8));
- wmb();
- writel_relaxed(*val, ispif->base + ISPIF_VFE_m_INTF_CMD_1(vfe));
- wmb();
- } else {
- val = &ispif->intf_cmd[vfe].cmd_0;
- *val &= ~(0x3 << (vc * 2 + intf * 8));
- *val |= (cmd << (vc * 2 + intf * 8));
- wmb();
- writel_relaxed(*val, ispif->base + ISPIF_VFE_m_INTF_CMD_0(vfe));
- wmb();
- }
-}
-
-/*
- * ispif_set_stream - Enable/disable streaming on ISPIF module
- * @sd: ISPIF V4L2 subdevice
- * @enable: Requested streaming state
- *
- * Main configuration of ISPIF module is also done here.
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int ispif_set_stream(struct v4l2_subdev *sd, int enable)
-{
- struct ispif_line *line = v4l2_get_subdevdata(sd);
- struct ispif_device *ispif = to_ispif(line);
- enum ispif_intf intf = line->interface;
- u8 csid = line->csid_id;
- u8 vfe = line->vfe_id;
- u8 vc = 0; /* Virtual Channel 0 */
- u8 cid = vc * 4; /* id of Virtual Channel and Data Type set */
- int ret;
-
- if (enable) {
- if (!media_entity_remote_pad(&line->pads[MSM_ISPIF_PAD_SINK]))
- return -ENOLINK;
-
- /* Config */
-
- mutex_lock(&ispif->config_lock);
- ispif_select_clk_mux(ispif, intf, csid, vfe, 1);
-
- ret = ispif_validate_intf_status(ispif, intf, vfe);
- if (ret < 0) {
- mutex_unlock(&ispif->config_lock);
- return ret;
- }
-
- ispif_select_csid(ispif, intf, csid, vfe, 1);
- ispif_select_cid(ispif, intf, cid, vfe, 1);
- ispif_config_irq(ispif, intf, vfe, 1);
- ispif_set_intf_cmd(ispif, CMD_ENABLE_FRAME_BOUNDARY,
- intf, vfe, vc);
- } else {
- mutex_lock(&ispif->config_lock);
- ispif_set_intf_cmd(ispif, CMD_DISABLE_FRAME_BOUNDARY,
- intf, vfe, vc);
- mutex_unlock(&ispif->config_lock);
-
- ret = ispif_wait_for_stop(ispif, intf, vfe);
- if (ret < 0)
- return ret;
-
- mutex_lock(&ispif->config_lock);
- ispif_config_irq(ispif, intf, vfe, 0);
- ispif_select_cid(ispif, intf, cid, vfe, 0);
- ispif_select_csid(ispif, intf, csid, vfe, 0);
- ispif_select_clk_mux(ispif, intf, csid, vfe, 0);
- }
-
- mutex_unlock(&ispif->config_lock);
-
- return 0;
-}
-
-/*
- * __ispif_get_format - Get pointer to format structure
- * @ispif: ISPIF line
- * @cfg: V4L2 subdev pad configuration
- * @pad: pad from which format is requested
- * @which: TRY or ACTIVE format
- *
- * Return pointer to TRY or ACTIVE format structure
- */
-static struct v4l2_mbus_framefmt *
-__ispif_get_format(struct ispif_line *line,
- struct v4l2_subdev_pad_config *cfg,
- unsigned int pad,
- enum v4l2_subdev_format_whence which)
-{
- if (which == V4L2_SUBDEV_FORMAT_TRY)
- return v4l2_subdev_get_try_format(&line->subdev, cfg, pad);
-
- return &line->fmt[pad];
-}
-
-/*
- * ispif_try_format - Handle try format by pad subdev method
- * @ispif: ISPIF line
- * @cfg: V4L2 subdev pad configuration
- * @pad: pad on which format is requested
- * @fmt: pointer to v4l2 format structure
- * @which: wanted subdev format
- */
-static void ispif_try_format(struct ispif_line *line,
- struct v4l2_subdev_pad_config *cfg,
- unsigned int pad,
- struct v4l2_mbus_framefmt *fmt,
- enum v4l2_subdev_format_whence which)
-{
- unsigned int i;
-
- switch (pad) {
- case MSM_ISPIF_PAD_SINK:
- /* Set format on sink pad */
-
- for (i = 0; i < ARRAY_SIZE(ispif_formats); i++)
- if (fmt->code == ispif_formats[i])
- break;
-
- /* If not found, use UYVY as default */
- if (i >= ARRAY_SIZE(ispif_formats))
- fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
-
- fmt->width = clamp_t(u32, fmt->width, 1, 8191);
- fmt->height = clamp_t(u32, fmt->height, 1, 8191);
-
- fmt->field = V4L2_FIELD_NONE;
- fmt->colorspace = V4L2_COLORSPACE_SRGB;
-
- break;
-
- case MSM_ISPIF_PAD_SRC:
- /* Set and return a format same as sink pad */
-
- *fmt = *__ispif_get_format(line, cfg, MSM_ISPIF_PAD_SINK,
- which);
-
- break;
- }
-
- fmt->colorspace = V4L2_COLORSPACE_SRGB;
-}
-
-/*
- * ispif_enum_mbus_code - Handle pixel format enumeration
- * @sd: ISPIF V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @code: pointer to v4l2_subdev_mbus_code_enum structure
- * return -EINVAL or zero on success
- */
-static int ispif_enum_mbus_code(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_mbus_code_enum *code)
-{
- struct ispif_line *line = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt *format;
-
- if (code->pad == MSM_ISPIF_PAD_SINK) {
- if (code->index >= ARRAY_SIZE(ispif_formats))
- return -EINVAL;
-
- code->code = ispif_formats[code->index];
- } else {
- if (code->index > 0)
- return -EINVAL;
-
- format = __ispif_get_format(line, cfg, MSM_ISPIF_PAD_SINK,
- code->which);
-
- code->code = format->code;
- }
-
- return 0;
-}
-
-/*
- * ispif_enum_frame_size - Handle frame size enumeration
- * @sd: ISPIF V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @fse: pointer to v4l2_subdev_frame_size_enum structure
- * return -EINVAL or zero on success
- */
-static int ispif_enum_frame_size(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_frame_size_enum *fse)
-{
- struct ispif_line *line = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt format;
-
- if (fse->index != 0)
- return -EINVAL;
-
- format.code = fse->code;
- format.width = 1;
- format.height = 1;
- ispif_try_format(line, cfg, fse->pad, &format, fse->which);
- fse->min_width = format.width;
- fse->min_height = format.height;
-
- if (format.code != fse->code)
- return -EINVAL;
-
- format.code = fse->code;
- format.width = -1;
- format.height = -1;
- ispif_try_format(line, cfg, fse->pad, &format, fse->which);
- fse->max_width = format.width;
- fse->max_height = format.height;
-
- return 0;
-}
-
-/*
- * ispif_get_format - Handle get format by pads subdev method
- * @sd: ISPIF V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @fmt: pointer to v4l2 subdev format structure
- *
- * Return -EINVAL or zero on success
- */
-static int ispif_get_format(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *fmt)
-{
- struct ispif_line *line = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt *format;
-
- format = __ispif_get_format(line, cfg, fmt->pad, fmt->which);
- if (format == NULL)
- return -EINVAL;
-
- fmt->format = *format;
-
- return 0;
-}
-
-/*
- * ispif_set_format - Handle set format by pads subdev method
- * @sd: ISPIF V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @fmt: pointer to v4l2 subdev format structure
- *
- * Return -EINVAL or zero on success
- */
-static int ispif_set_format(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *fmt)
-{
- struct ispif_line *line = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt *format;
-
- format = __ispif_get_format(line, cfg, fmt->pad, fmt->which);
- if (format == NULL)
- return -EINVAL;
-
- ispif_try_format(line, cfg, fmt->pad, &fmt->format, fmt->which);
- *format = fmt->format;
-
- /* Propagate the format from sink to source */
- if (fmt->pad == MSM_ISPIF_PAD_SINK) {
- format = __ispif_get_format(line, cfg, MSM_ISPIF_PAD_SRC,
- fmt->which);
-
- *format = fmt->format;
- ispif_try_format(line, cfg, MSM_ISPIF_PAD_SRC, format,
- fmt->which);
- }
-
- return 0;
-}
-
-/*
- * ispif_init_formats - Initialize formats on all pads
- * @sd: ISPIF V4L2 subdevice
- * @fh: V4L2 subdev file handle
- *
- * Initialize all pad formats with default values.
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int ispif_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
- struct v4l2_subdev_format format = {
- .pad = MSM_ISPIF_PAD_SINK,
- .which = fh ? V4L2_SUBDEV_FORMAT_TRY :
- V4L2_SUBDEV_FORMAT_ACTIVE,
- .format = {
- .code = MEDIA_BUS_FMT_UYVY8_2X8,
- .width = 1920,
- .height = 1080
- }
- };
-
- return ispif_set_format(sd, fh ? fh->pad : NULL, &format);
-}
-
-/*
- * msm_ispif_subdev_init - Initialize ISPIF device structure and resources
- * @ispif: ISPIF device
- * @res: ISPIF module resources table
- *
- * Return 0 on success or a negative error code otherwise
- */
-int msm_ispif_subdev_init(struct ispif_device *ispif,
- const struct resources_ispif *res)
-{
- struct device *dev = to_device(ispif);
- struct platform_device *pdev = to_platform_device(dev);
- struct resource *r;
- int i;
- int ret;
-
- /* Memory */
-
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[0]);
- ispif->base = devm_ioremap_resource(dev, r);
- if (IS_ERR(ispif->base)) {
- dev_err(dev, "could not map memory\n");
- return PTR_ERR(ispif->base);
- }
-
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[1]);
- ispif->base_clk_mux = devm_ioremap_resource(dev, r);
- if (IS_ERR(ispif->base_clk_mux)) {
- dev_err(dev, "could not map memory\n");
- return PTR_ERR(ispif->base_clk_mux);
- }
-
- /* Interrupt */
-
- r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res->interrupt);
-
- if (!r) {
- dev_err(dev, "missing IRQ\n");
- return -EINVAL;
- }
-
- ispif->irq = r->start;
- snprintf(ispif->irq_name, sizeof(ispif->irq_name), "%s_%s",
- dev_name(dev), MSM_ISPIF_NAME);
- ret = devm_request_irq(dev, ispif->irq, ispif_isr,
- IRQF_TRIGGER_RISING, ispif->irq_name, ispif);
- if (ret < 0) {
- dev_err(dev, "request_irq failed: %d\n", ret);
- return ret;
- }
-
- /* Clocks */
-
- ispif->nclocks = 0;
- while (res->clock[ispif->nclocks])
- ispif->nclocks++;
-
- ispif->clock = devm_kcalloc(dev,
- ispif->nclocks, sizeof(*ispif->clock),
- GFP_KERNEL);
- if (!ispif->clock)
- return -ENOMEM;
-
- for (i = 0; i < ispif->nclocks; i++) {
- struct camss_clock *clock = &ispif->clock[i];
-
- clock->clk = devm_clk_get(dev, res->clock[i]);
- if (IS_ERR(clock->clk))
- return PTR_ERR(clock->clk);
-
- clock->freq = NULL;
- clock->nfreqs = 0;
- }
-
- ispif->nclocks_for_reset = 0;
- while (res->clock_for_reset[ispif->nclocks_for_reset])
- ispif->nclocks_for_reset++;
-
- ispif->clock_for_reset = devm_kcalloc(dev,
- ispif->nclocks_for_reset,
- sizeof(*ispif->clock_for_reset),
- GFP_KERNEL);
- if (!ispif->clock_for_reset)
- return -ENOMEM;
-
- for (i = 0; i < ispif->nclocks_for_reset; i++) {
- struct camss_clock *clock = &ispif->clock_for_reset[i];
-
- clock->clk = devm_clk_get(dev, res->clock_for_reset[i]);
- if (IS_ERR(clock->clk))
- return PTR_ERR(clock->clk);
-
- clock->freq = NULL;
- clock->nfreqs = 0;
- }
-
- for (i = 0; i < ARRAY_SIZE(ispif->line); i++)
- ispif->line[i].id = i;
-
- mutex_init(&ispif->power_lock);
- ispif->power_count = 0;
-
- mutex_init(&ispif->config_lock);
-
- init_completion(&ispif->reset_complete);
-
- return 0;
-}
-
-/*
- * ispif_get_intf - Get ISPIF interface to use by VFE line id
- * @line_id: VFE line id that the ISPIF line is connected to
- *
- * Return ISPIF interface to use
- */
-static enum ispif_intf ispif_get_intf(enum vfe_line_id line_id)
-{
- switch (line_id) {
- case (VFE_LINE_RDI0):
- return RDI0;
- case (VFE_LINE_RDI1):
- return RDI1;
- case (VFE_LINE_RDI2):
- return RDI2;
- case (VFE_LINE_PIX):
- return PIX0;
- default:
- return RDI0;
- }
-}
-
-/*
- * ispif_link_setup - Setup ISPIF connections
- * @entity: Pointer to media entity structure
- * @local: Pointer to local pad
- * @remote: Pointer to remote pad
- * @flags: Link flags
- *
- * Return 0 on success
- */
-static int ispif_link_setup(struct media_entity *entity,
- const struct media_pad *local,
- const struct media_pad *remote, u32 flags)
-{
- if (flags & MEDIA_LNK_FL_ENABLED) {
- if (media_entity_remote_pad(local))
- return -EBUSY;
-
- if (local->flags & MEDIA_PAD_FL_SINK) {
- struct v4l2_subdev *sd;
- struct ispif_line *line;
-
- sd = media_entity_to_v4l2_subdev(entity);
- line = v4l2_get_subdevdata(sd);
-
- msm_csid_get_csid_id(remote->entity, &line->csid_id);
- } else { /* MEDIA_PAD_FL_SOURCE */
- struct v4l2_subdev *sd;
- struct ispif_line *line;
- enum vfe_line_id id;
-
- sd = media_entity_to_v4l2_subdev(entity);
- line = v4l2_get_subdevdata(sd);
-
- msm_vfe_get_vfe_id(remote->entity, &line->vfe_id);
- msm_vfe_get_vfe_line_id(remote->entity, &id);
- line->interface = ispif_get_intf(id);
- }
- }
-
- return 0;
-}
-
-static const struct v4l2_subdev_core_ops ispif_core_ops = {
- .s_power = ispif_set_power,
-};
-
-static const struct v4l2_subdev_video_ops ispif_video_ops = {
- .s_stream = ispif_set_stream,
-};
-
-static const struct v4l2_subdev_pad_ops ispif_pad_ops = {
- .enum_mbus_code = ispif_enum_mbus_code,
- .enum_frame_size = ispif_enum_frame_size,
- .get_fmt = ispif_get_format,
- .set_fmt = ispif_set_format,
-};
-
-static const struct v4l2_subdev_ops ispif_v4l2_ops = {
- .core = &ispif_core_ops,
- .video = &ispif_video_ops,
- .pad = &ispif_pad_ops,
-};
-
-static const struct v4l2_subdev_internal_ops ispif_v4l2_internal_ops = {
- .open = ispif_init_formats,
-};
-
-static const struct media_entity_operations ispif_media_ops = {
- .link_setup = ispif_link_setup,
- .link_validate = v4l2_subdev_link_validate,
-};
-
-/*
- * msm_ispif_register_entities - Register subdev node for ISPIF module
- * @ispif: ISPIF device
- * @v4l2_dev: V4L2 device
- *
- * Return 0 on success or a negative error code otherwise
- */
-int msm_ispif_register_entities(struct ispif_device *ispif,
- struct v4l2_device *v4l2_dev)
-{
- struct device *dev = to_device(ispif);
- int ret;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(ispif->line); i++) {
- struct v4l2_subdev *sd = &ispif->line[i].subdev;
- struct media_pad *pads = ispif->line[i].pads;
-
- v4l2_subdev_init(sd, &ispif_v4l2_ops);
- sd->internal_ops = &ispif_v4l2_internal_ops;
- sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
- snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d",
- MSM_ISPIF_NAME, i);
- v4l2_set_subdevdata(sd, &ispif->line[i]);
-
- ret = ispif_init_formats(sd, NULL);
- if (ret < 0) {
- dev_err(dev, "Failed to init format: %d\n", ret);
- goto error;
- }
-
- pads[MSM_ISPIF_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
- pads[MSM_ISPIF_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
-
- sd->entity.function = MEDIA_ENT_F_IO_V4L;
- sd->entity.ops = &ispif_media_ops;
- ret = media_entity_pads_init(&sd->entity, MSM_ISPIF_PADS_NUM,
- pads);
- if (ret < 0) {
- dev_err(dev, "Failed to init media entity: %d\n", ret);
- goto error;
- }
-
- ret = v4l2_device_register_subdev(v4l2_dev, sd);
- if (ret < 0) {
- dev_err(dev, "Failed to register subdev: %d\n", ret);
- media_entity_cleanup(&sd->entity);
- goto error;
- }
- }
-
- return 0;
-
-error:
- for (i--; i >= 0; i--) {
- struct v4l2_subdev *sd = &ispif->line[i].subdev;
-
- v4l2_device_unregister_subdev(sd);
- media_entity_cleanup(&sd->entity);
- }
-
- return ret;
-}
-
-/*
- * msm_ispif_unregister_entities - Unregister ISPIF module subdev node
- * @ispif: ISPIF device
- */
-void msm_ispif_unregister_entities(struct ispif_device *ispif)
-{
- int i;
-
- mutex_destroy(&ispif->power_lock);
- mutex_destroy(&ispif->config_lock);
-
- for (i = 0; i < ARRAY_SIZE(ispif->line); i++) {
- struct v4l2_subdev *sd = &ispif->line[i].subdev;
-
- v4l2_device_unregister_subdev(sd);
- media_entity_cleanup(&sd->entity);
- }
-}
deleted file mode 100644
@@ -1,85 +0,0 @@
-/*
- * camss-ispif.h
- *
- * Qualcomm MSM Camera Subsystem - ISPIF (ISP Interface) Module
- *
- * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
- * Copyright (C) 2015-2017 Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef QC_MSM_CAMSS_ISPIF_H
-#define QC_MSM_CAMSS_ISPIF_H
-
-#include <linux/clk.h>
-#include <media/media-entity.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-
-/* Number of ISPIF lines - same as number of CSID hardware modules */
-#define MSM_ISPIF_LINE_NUM 2
-
-#define MSM_ISPIF_PAD_SINK 0
-#define MSM_ISPIF_PAD_SRC 1
-#define MSM_ISPIF_PADS_NUM 2
-
-#define MSM_ISPIF_VFE_NUM 1
-
-enum ispif_intf {
- PIX0,
- RDI0,
- PIX1,
- RDI1,
- RDI2
-};
-
-struct ispif_intf_cmd_reg {
- u32 cmd_0;
- u32 cmd_1;
-};
-
-struct ispif_line {
- u8 id;
- u8 csid_id;
- u8 vfe_id;
- enum ispif_intf interface;
- struct v4l2_subdev subdev;
- struct media_pad pads[MSM_ISPIF_PADS_NUM];
- struct v4l2_mbus_framefmt fmt[MSM_ISPIF_PADS_NUM];
-};
-
-struct ispif_device {
- void __iomem *base;
- void __iomem *base_clk_mux;
- u32 irq;
- char irq_name[30];
- struct camss_clock *clock;
- int nclocks;
- struct camss_clock *clock_for_reset;
- int nclocks_for_reset;
- struct completion reset_complete;
- int power_count;
- struct mutex power_lock;
- struct ispif_intf_cmd_reg intf_cmd[MSM_ISPIF_VFE_NUM];
- struct mutex config_lock;
- struct ispif_line line[MSM_ISPIF_LINE_NUM];
-};
-
-struct resources_ispif;
-
-int msm_ispif_subdev_init(struct ispif_device *ispif,
- const struct resources_ispif *res);
-
-int msm_ispif_register_entities(struct ispif_device *ispif,
- struct v4l2_device *v4l2_dev);
-
-void msm_ispif_unregister_entities(struct ispif_device *ispif);
-
-#endif /* QC_MSM_CAMSS_ISPIF_H */
deleted file mode 100644
@@ -1,3093 +0,0 @@
-/*
- * camss-vfe.c
- *
- * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module
- *
- * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
- * Copyright (C) 2015-2017 Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/clk.h>
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-#include <linux/iommu.h>
-#include <linux/iopoll.h>
-#include <linux/mutex.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/spinlock_types.h>
-#include <linux/spinlock.h>
-#include <media/media-entity.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-
-#include "camss-vfe.h"
-#include "camss.h"
-
-#define MSM_VFE_NAME "msm_vfe"
-
-#define vfe_line_array(ptr_line) \
- ((const struct vfe_line (*)[]) &(ptr_line[-(ptr_line->id)]))
-
-#define to_vfe(ptr_line) \
- container_of(vfe_line_array(ptr_line), struct vfe_device, ptr_line)
-
-#define VFE_0_HW_VERSION 0x000
-
-#define VFE_0_GLOBAL_RESET_CMD 0x00c
-#define VFE_0_GLOBAL_RESET_CMD_CORE (1 << 0)
-#define VFE_0_GLOBAL_RESET_CMD_CAMIF (1 << 1)
-#define VFE_0_GLOBAL_RESET_CMD_BUS (1 << 2)
-#define VFE_0_GLOBAL_RESET_CMD_BUS_BDG (1 << 3)
-#define VFE_0_GLOBAL_RESET_CMD_REGISTER (1 << 4)
-#define VFE_0_GLOBAL_RESET_CMD_TIMER (1 << 5)
-#define VFE_0_GLOBAL_RESET_CMD_PM (1 << 6)
-#define VFE_0_GLOBAL_RESET_CMD_BUS_MISR (1 << 7)
-#define VFE_0_GLOBAL_RESET_CMD_TESTGEN (1 << 8)
-
-#define VFE_0_MODULE_CFG 0x018
-#define VFE_0_MODULE_CFG_DEMUX (1 << 2)
-#define VFE_0_MODULE_CFG_CHROMA_UPSAMPLE (1 << 3)
-#define VFE_0_MODULE_CFG_SCALE_ENC (1 << 23)
-#define VFE_0_MODULE_CFG_CROP_ENC (1 << 27)
-
-#define VFE_0_CORE_CFG 0x01c
-#define VFE_0_CORE_CFG_PIXEL_PATTERN_YCBYCR 0x4
-#define VFE_0_CORE_CFG_PIXEL_PATTERN_YCRYCB 0x5
-#define VFE_0_CORE_CFG_PIXEL_PATTERN_CBYCRY 0x6
-#define VFE_0_CORE_CFG_PIXEL_PATTERN_CRYCBY 0x7
-
-#define VFE_0_IRQ_CMD 0x024
-#define VFE_0_IRQ_CMD_GLOBAL_CLEAR (1 << 0)
-
-#define VFE_0_IRQ_MASK_0 0x028
-#define VFE_0_IRQ_MASK_0_CAMIF_SOF (1 << 0)
-#define VFE_0_IRQ_MASK_0_CAMIF_EOF (1 << 1)
-#define VFE_0_IRQ_MASK_0_RDIn_REG_UPDATE(n) (1 << ((n) + 5))
-#define VFE_0_IRQ_MASK_0_line_n_REG_UPDATE(n) \
- ((n) == VFE_LINE_PIX ? (1 << 4) : VFE_0_IRQ_MASK_0_RDIn_REG_UPDATE(n))
-#define VFE_0_IRQ_MASK_0_IMAGE_MASTER_n_PING_PONG(n) (1 << ((n) + 8))
-#define VFE_0_IRQ_MASK_0_IMAGE_COMPOSITE_DONE_n(n) (1 << ((n) + 25))
-#define VFE_0_IRQ_MASK_0_RESET_ACK (1 << 31)
-#define VFE_0_IRQ_MASK_1 0x02c
-#define VFE_0_IRQ_MASK_1_CAMIF_ERROR (1 << 0)
-#define VFE_0_IRQ_MASK_1_VIOLATION (1 << 7)
-#define VFE_0_IRQ_MASK_1_BUS_BDG_HALT_ACK (1 << 8)
-#define VFE_0_IRQ_MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(n) (1 << ((n) + 9))
-#define VFE_0_IRQ_MASK_1_RDIn_SOF(n) (1 << ((n) + 29))
-
-#define VFE_0_IRQ_CLEAR_0 0x030
-#define VFE_0_IRQ_CLEAR_1 0x034
-
-#define VFE_0_IRQ_STATUS_0 0x038
-#define VFE_0_IRQ_STATUS_0_CAMIF_SOF (1 << 0)
-#define VFE_0_IRQ_STATUS_0_RDIn_REG_UPDATE(n) (1 << ((n) + 5))
-#define VFE_0_IRQ_STATUS_0_line_n_REG_UPDATE(n) \
- ((n) == VFE_LINE_PIX ? (1 << 4) : VFE_0_IRQ_STATUS_0_RDIn_REG_UPDATE(n))
-#define VFE_0_IRQ_STATUS_0_IMAGE_MASTER_n_PING_PONG(n) (1 << ((n) + 8))
-#define VFE_0_IRQ_STATUS_0_IMAGE_COMPOSITE_DONE_n(n) (1 << ((n) + 25))
-#define VFE_0_IRQ_STATUS_0_RESET_ACK (1 << 31)
-#define VFE_0_IRQ_STATUS_1 0x03c
-#define VFE_0_IRQ_STATUS_1_VIOLATION (1 << 7)
-#define VFE_0_IRQ_STATUS_1_BUS_BDG_HALT_ACK (1 << 8)
-#define VFE_0_IRQ_STATUS_1_RDIn_SOF(n) (1 << ((n) + 29))
-
-#define VFE_0_IRQ_COMPOSITE_MASK_0 0x40
-#define VFE_0_VIOLATION_STATUS 0x48
-
-#define VFE_0_BUS_CMD 0x4c
-#define VFE_0_BUS_CMD_Mx_RLD_CMD(x) (1 << (x))
-
-#define VFE_0_BUS_CFG 0x050
-
-#define VFE_0_BUS_XBAR_CFG_x(x) (0x58 + 0x4 * ((x) / 2))
-#define VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_EN (1 << 1)
-#define VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTER_INTRA (0x3 << 4)
-#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT 8
-#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_LUMA 0
-#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI0 5
-#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI1 6
-#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI2 7
-
-#define VFE_0_BUS_IMAGE_MASTER_n_WR_CFG(n) (0x06c + 0x24 * (n))
-#define VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_WR_PATH_SHIFT 0
-#define VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_FRM_BASED_SHIFT 1
-#define VFE_0_BUS_IMAGE_MASTER_n_WR_PING_ADDR(n) (0x070 + 0x24 * (n))
-#define VFE_0_BUS_IMAGE_MASTER_n_WR_PONG_ADDR(n) (0x074 + 0x24 * (n))
-#define VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG(n) (0x078 + 0x24 * (n))
-#define VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_DROP_PER_SHIFT 2
-#define VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_DROP_PER_MASK (0x1F << 2)
-
-#define VFE_0_BUS_IMAGE_MASTER_n_WR_UB_CFG(n) (0x07c + 0x24 * (n))
-#define VFE_0_BUS_IMAGE_MASTER_n_WR_UB_CFG_OFFSET_SHIFT 16
-#define VFE_0_BUS_IMAGE_MASTER_n_WR_IMAGE_SIZE(n) (0x080 + 0x24 * (n))
-#define VFE_0_BUS_IMAGE_MASTER_n_WR_BUFFER_CFG(n) (0x084 + 0x24 * (n))
-#define VFE_0_BUS_IMAGE_MASTER_n_WR_FRAMEDROP_PATTERN(n) \
- (0x088 + 0x24 * (n))
-#define VFE_0_BUS_IMAGE_MASTER_n_WR_IRQ_SUBSAMPLE_PATTERN(n) \
- (0x08c + 0x24 * (n))
-#define VFE_0_BUS_IMAGE_MASTER_n_WR_IRQ_SUBSAMPLE_PATTERN_DEF 0xffffffff
-
-#define VFE_0_BUS_PING_PONG_STATUS 0x268
-
-#define VFE_0_BUS_BDG_CMD 0x2c0
-#define VFE_0_BUS_BDG_CMD_HALT_REQ 1
-
-#define VFE_0_BUS_BDG_QOS_CFG_0 0x2c4
-#define VFE_0_BUS_BDG_QOS_CFG_0_CFG 0xaaa5aaa5
-#define VFE_0_BUS_BDG_QOS_CFG_1 0x2c8
-#define VFE_0_BUS_BDG_QOS_CFG_2 0x2cc
-#define VFE_0_BUS_BDG_QOS_CFG_3 0x2d0
-#define VFE_0_BUS_BDG_QOS_CFG_4 0x2d4
-#define VFE_0_BUS_BDG_QOS_CFG_5 0x2d8
-#define VFE_0_BUS_BDG_QOS_CFG_6 0x2dc
-#define VFE_0_BUS_BDG_QOS_CFG_7 0x2e0
-#define VFE_0_BUS_BDG_QOS_CFG_7_CFG 0x0001aaa5
-
-#define VFE_0_RDI_CFG_x(x) (0x2e8 + (0x4 * (x)))
-#define VFE_0_RDI_CFG_x_RDI_STREAM_SEL_SHIFT 28
-#define VFE_0_RDI_CFG_x_RDI_STREAM_SEL_MASK (0xf << 28)
-#define VFE_0_RDI_CFG_x_RDI_M0_SEL_SHIFT 4
-#define VFE_0_RDI_CFG_x_RDI_M0_SEL_MASK (0xf << 4)
-#define VFE_0_RDI_CFG_x_RDI_EN_BIT (1 << 2)
-#define VFE_0_RDI_CFG_x_MIPI_EN_BITS 0x3
-#define VFE_0_RDI_CFG_x_RDI_Mr_FRAME_BASED_EN(r) (1 << (16 + (r)))
-
-#define VFE_0_CAMIF_CMD 0x2f4
-#define VFE_0_CAMIF_CMD_DISABLE_FRAME_BOUNDARY 0
-#define VFE_0_CAMIF_CMD_ENABLE_FRAME_BOUNDARY 1
-#define VFE_0_CAMIF_CMD_CLEAR_CAMIF_STATUS (1 << 2)
-#define VFE_0_CAMIF_CFG 0x2f8
-#define VFE_0_CAMIF_CFG_VFE_OUTPUT_EN (1 << 6)
-#define VFE_0_CAMIF_FRAME_CFG 0x300
-#define VFE_0_CAMIF_WINDOW_WIDTH_CFG 0x304
-#define VFE_0_CAMIF_WINDOW_HEIGHT_CFG 0x308
-#define VFE_0_CAMIF_SUBSAMPLE_CFG_0 0x30c
-#define VFE_0_CAMIF_IRQ_SUBSAMPLE_PATTERN 0x314
-#define VFE_0_CAMIF_STATUS 0x31c
-#define VFE_0_CAMIF_STATUS_HALT (1 << 31)
-
-#define VFE_0_REG_UPDATE 0x378
-#define VFE_0_REG_UPDATE_RDIn(n) (1 << (1 + (n)))
-#define VFE_0_REG_UPDATE_line_n(n) \
- ((n) == VFE_LINE_PIX ? 1 : VFE_0_REG_UPDATE_RDIn(n))
-
-#define VFE_0_DEMUX_CFG 0x424
-#define VFE_0_DEMUX_CFG_PERIOD 0x3
-#define VFE_0_DEMUX_GAIN_0 0x428
-#define VFE_0_DEMUX_GAIN_0_CH0_EVEN (0x80 << 0)
-#define VFE_0_DEMUX_GAIN_0_CH0_ODD (0x80 << 16)
-#define VFE_0_DEMUX_GAIN_1 0x42c
-#define VFE_0_DEMUX_GAIN_1_CH1 (0x80 << 0)
-#define VFE_0_DEMUX_GAIN_1_CH2 (0x80 << 16)
-#define VFE_0_DEMUX_EVEN_CFG 0x438
-#define VFE_0_DEMUX_EVEN_CFG_PATTERN_YUYV 0x9cac
-#define VFE_0_DEMUX_EVEN_CFG_PATTERN_YVYU 0xac9c
-#define VFE_0_DEMUX_EVEN_CFG_PATTERN_UYVY 0xc9ca
-#define VFE_0_DEMUX_EVEN_CFG_PATTERN_VYUY 0xcac9
-#define VFE_0_DEMUX_ODD_CFG 0x43c
-#define VFE_0_DEMUX_ODD_CFG_PATTERN_YUYV 0x9cac
-#define VFE_0_DEMUX_ODD_CFG_PATTERN_YVYU 0xac9c
-#define VFE_0_DEMUX_ODD_CFG_PATTERN_UYVY 0xc9ca
-#define VFE_0_DEMUX_ODD_CFG_PATTERN_VYUY 0xcac9
-
-#define VFE_0_SCALE_ENC_Y_CFG 0x75c
-#define VFE_0_SCALE_ENC_Y_H_IMAGE_SIZE 0x760
-#define VFE_0_SCALE_ENC_Y_H_PHASE 0x764
-#define VFE_0_SCALE_ENC_Y_V_IMAGE_SIZE 0x76c
-#define VFE_0_SCALE_ENC_Y_V_PHASE 0x770
-#define VFE_0_SCALE_ENC_CBCR_CFG 0x778
-#define VFE_0_SCALE_ENC_CBCR_H_IMAGE_SIZE 0x77c
-#define VFE_0_SCALE_ENC_CBCR_H_PHASE 0x780
-#define VFE_0_SCALE_ENC_CBCR_V_IMAGE_SIZE 0x790
-#define VFE_0_SCALE_ENC_CBCR_V_PHASE 0x794
-
-#define VFE_0_CROP_ENC_Y_WIDTH 0x854
-#define VFE_0_CROP_ENC_Y_HEIGHT 0x858
-#define VFE_0_CROP_ENC_CBCR_WIDTH 0x85c
-#define VFE_0_CROP_ENC_CBCR_HEIGHT 0x860
-
-#define VFE_0_CLAMP_ENC_MAX_CFG 0x874
-#define VFE_0_CLAMP_ENC_MAX_CFG_CH0 (0xff << 0)
-#define VFE_0_CLAMP_ENC_MAX_CFG_CH1 (0xff << 8)
-#define VFE_0_CLAMP_ENC_MAX_CFG_CH2 (0xff << 16)
-#define VFE_0_CLAMP_ENC_MIN_CFG 0x878
-#define VFE_0_CLAMP_ENC_MIN_CFG_CH0 (0x0 << 0)
-#define VFE_0_CLAMP_ENC_MIN_CFG_CH1 (0x0 << 8)
-#define VFE_0_CLAMP_ENC_MIN_CFG_CH2 (0x0 << 16)
-
-#define VFE_0_CGC_OVERRIDE_1 0x974
-#define VFE_0_CGC_OVERRIDE_1_IMAGE_Mx_CGC_OVERRIDE(x) (1 << (x))
-
-/* VFE reset timeout */
-#define VFE_RESET_TIMEOUT_MS 50
-/* VFE halt timeout */
-#define VFE_HALT_TIMEOUT_MS 100
-/* Max number of frame drop updates per frame */
-#define VFE_FRAME_DROP_UPDATES 5
-/* Frame drop value. NOTE: VAL + UPDATES should not exceed 31 */
-#define VFE_FRAME_DROP_VAL 20
-
-#define VFE_NEXT_SOF_MS 500
-
-#define CAMIF_TIMEOUT_SLEEP_US 1000
-#define CAMIF_TIMEOUT_ALL_US 1000000
-
-#define SCALER_RATIO_MAX 16
-
-static const struct {
- u32 code;
- u8 bpp;
-} vfe_formats[] = {
- {
- MEDIA_BUS_FMT_UYVY8_2X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_VYUY8_2X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_YUYV8_2X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_YVYU8_2X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_SBGGR8_1X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_SGBRG8_1X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_SGRBG8_1X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_SRGGB8_1X8,
- 8,
- },
- {
- MEDIA_BUS_FMT_SBGGR10_1X10,
- 10,
- },
- {
- MEDIA_BUS_FMT_SGBRG10_1X10,
- 10,
- },
- {
- MEDIA_BUS_FMT_SGRBG10_1X10,
- 10,
- },
- {
- MEDIA_BUS_FMT_SRGGB10_1X10,
- 10,
- },
- {
- MEDIA_BUS_FMT_SBGGR12_1X12,
- 12,
- },
- {
- MEDIA_BUS_FMT_SGBRG12_1X12,
- 12,
- },
- {
- MEDIA_BUS_FMT_SGRBG12_1X12,
- 12,
- },
- {
- MEDIA_BUS_FMT_SRGGB12_1X12,
- 12,
- }
-};
-
-/*
- * vfe_get_bpp - map media bus format to bits per pixel
- * @code: media bus format code
- *
- * Return number of bits per pixel
- */
-static u8 vfe_get_bpp(u32 code)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(vfe_formats); i++)
- if (code == vfe_formats[i].code)
- return vfe_formats[i].bpp;
-
- WARN(1, "Unknown format\n");
-
- return vfe_formats[0].bpp;
-}
-
-static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
-{
- u32 bits = readl_relaxed(vfe->base + reg);
-
- writel_relaxed(bits & ~clr_bits, vfe->base + reg);
-}
-
-static inline void vfe_reg_set(struct vfe_device *vfe, u32 reg, u32 set_bits)
-{
- u32 bits = readl_relaxed(vfe->base + reg);
-
- writel_relaxed(bits | set_bits, vfe->base + reg);
-}
-
-static void vfe_global_reset(struct vfe_device *vfe)
-{
- u32 reset_bits = VFE_0_GLOBAL_RESET_CMD_TESTGEN |
- VFE_0_GLOBAL_RESET_CMD_BUS_MISR |
- VFE_0_GLOBAL_RESET_CMD_PM |
- VFE_0_GLOBAL_RESET_CMD_TIMER |
- VFE_0_GLOBAL_RESET_CMD_REGISTER |
- VFE_0_GLOBAL_RESET_CMD_BUS_BDG |
- VFE_0_GLOBAL_RESET_CMD_BUS |
- VFE_0_GLOBAL_RESET_CMD_CAMIF |
- VFE_0_GLOBAL_RESET_CMD_CORE;
-
- writel_relaxed(reset_bits, vfe->base + VFE_0_GLOBAL_RESET_CMD);
-}
-
-static void vfe_wm_enable(struct vfe_device *vfe, u8 wm, u8 enable)
-{
- if (enable)
- vfe_reg_set(vfe, VFE_0_BUS_IMAGE_MASTER_n_WR_CFG(wm),
- 1 << VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_WR_PATH_SHIFT);
- else
- vfe_reg_clr(vfe, VFE_0_BUS_IMAGE_MASTER_n_WR_CFG(wm),
- 1 << VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_WR_PATH_SHIFT);
-}
-
-static void vfe_wm_frame_based(struct vfe_device *vfe, u8 wm, u8 enable)
-{
- if (enable)
- vfe_reg_set(vfe, VFE_0_BUS_IMAGE_MASTER_n_WR_CFG(wm),
- 1 << VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_FRM_BASED_SHIFT);
- else
- vfe_reg_clr(vfe, VFE_0_BUS_IMAGE_MASTER_n_WR_CFG(wm),
- 1 << VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_FRM_BASED_SHIFT);
-}
-
-#define CALC_WORD(width, M, N) (((width) * (M) + (N) - 1) / (N))
-
-static int vfe_word_per_line(uint32_t format, uint32_t pixel_per_line)
-{
- int val = 0;
-
- switch (format) {
- case V4L2_PIX_FMT_NV12:
- case V4L2_PIX_FMT_NV21:
- case V4L2_PIX_FMT_NV16:
- case V4L2_PIX_FMT_NV61:
- val = CALC_WORD(pixel_per_line, 1, 8);
- break;
- case V4L2_PIX_FMT_YUYV:
- case V4L2_PIX_FMT_YVYU:
- case V4L2_PIX_FMT_UYVY:
- case V4L2_PIX_FMT_VYUY:
- val = CALC_WORD(pixel_per_line, 2, 8);
- break;
- }
-
- return val;
-}
-
-static void vfe_get_wm_sizes(struct v4l2_pix_format_mplane *pix, u8 plane,
- u16 *width, u16 *height, u16 *bytesperline)
-{
- switch (pix->pixelformat) {
- case V4L2_PIX_FMT_NV12:
- case V4L2_PIX_FMT_NV21:
- *width = pix->width;
- *height = pix->height;
- *bytesperline = pix->plane_fmt[0].bytesperline;
- if (plane == 1)
- *height /= 2;
- break;
- case V4L2_PIX_FMT_NV16:
- case V4L2_PIX_FMT_NV61:
- *width = pix->width;
- *height = pix->height;
- *bytesperline = pix->plane_fmt[0].bytesperline;
- break;
- }
-}
-
-static void vfe_wm_line_based(struct vfe_device *vfe, u32 wm,
- struct v4l2_pix_format_mplane *pix,
- u8 plane, u32 enable)
-{
- u32 reg;
-
- if (enable) {
- u16 width = 0, height = 0, bytesperline = 0, wpl;
-
- vfe_get_wm_sizes(pix, plane, &width, &height, &bytesperline);
-
- wpl = vfe_word_per_line(pix->pixelformat, width);
-
- reg = height - 1;
- reg |= ((wpl + 1) / 2 - 1) << 16;
-
- writel_relaxed(reg, vfe->base +
- VFE_0_BUS_IMAGE_MASTER_n_WR_IMAGE_SIZE(wm));
-
- wpl = vfe_word_per_line(pix->pixelformat, bytesperline);
-
- reg = 0x3;
- reg |= (height - 1) << 4;
- reg |= wpl << 16;
-
- writel_relaxed(reg, vfe->base +
- VFE_0_BUS_IMAGE_MASTER_n_WR_BUFFER_CFG(wm));
- } else {
- writel_relaxed(0, vfe->base +
- VFE_0_BUS_IMAGE_MASTER_n_WR_IMAGE_SIZE(wm));
- writel_relaxed(0, vfe->base +
- VFE_0_BUS_IMAGE_MASTER_n_WR_BUFFER_CFG(wm));
- }
-}
-
-static void vfe_wm_set_framedrop_period(struct vfe_device *vfe, u8 wm, u8 per)
-{
- u32 reg;
-
- reg = readl_relaxed(vfe->base +
- VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG(wm));
-
- reg &= ~(VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_DROP_PER_MASK);
-
- reg |= (per << VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_DROP_PER_SHIFT)
- & VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_DROP_PER_MASK;
-
- writel_relaxed(reg,
- vfe->base + VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG(wm));
-}
-
-static void vfe_wm_set_framedrop_pattern(struct vfe_device *vfe, u8 wm,
- u32 pattern)
-{
- writel_relaxed(pattern,
- vfe->base + VFE_0_BUS_IMAGE_MASTER_n_WR_FRAMEDROP_PATTERN(wm));
-}
-
-static void vfe_wm_set_ub_cfg(struct vfe_device *vfe, u8 wm, u16 offset,
- u16 depth)
-{
- u32 reg;
-
- reg = (offset << VFE_0_BUS_IMAGE_MASTER_n_WR_UB_CFG_OFFSET_SHIFT) |
- depth;
- writel_relaxed(reg, vfe->base + VFE_0_BUS_IMAGE_MASTER_n_WR_UB_CFG(wm));
-}
-
-static void vfe_bus_reload_wm(struct vfe_device *vfe, u8 wm)
-{
- wmb();
- writel_relaxed(VFE_0_BUS_CMD_Mx_RLD_CMD(wm), vfe->base + VFE_0_BUS_CMD);
- wmb();
-}
-
-static void vfe_wm_set_ping_addr(struct vfe_device *vfe, u8 wm, u32 addr)
-{
- writel_relaxed(addr,
- vfe->base + VFE_0_BUS_IMAGE_MASTER_n_WR_PING_ADDR(wm));
-}
-
-static void vfe_wm_set_pong_addr(struct vfe_device *vfe, u8 wm, u32 addr)
-{
- writel_relaxed(addr,
- vfe->base + VFE_0_BUS_IMAGE_MASTER_n_WR_PONG_ADDR(wm));
-}
-
-static int vfe_wm_get_ping_pong_status(struct vfe_device *vfe, u8 wm)
-{
- u32 reg;
-
- reg = readl_relaxed(vfe->base + VFE_0_BUS_PING_PONG_STATUS);
-
- return (reg >> wm) & 0x1;
-}
-
-static void vfe_bus_enable_wr_if(struct vfe_device *vfe, u8 enable)
-{
- if (enable)
- writel_relaxed(0x10000009, vfe->base + VFE_0_BUS_CFG);
- else
- writel_relaxed(0, vfe->base + VFE_0_BUS_CFG);
-}
-
-static void vfe_bus_connect_wm_to_rdi(struct vfe_device *vfe, u8 wm,
- enum vfe_line_id id)
-{
- u32 reg;
-
- reg = VFE_0_RDI_CFG_x_MIPI_EN_BITS;
- reg |= VFE_0_RDI_CFG_x_RDI_Mr_FRAME_BASED_EN(id);
- vfe_reg_set(vfe, VFE_0_RDI_CFG_x(0), reg);
-
- reg = VFE_0_RDI_CFG_x_RDI_EN_BIT;
- reg |= ((3 * id) << VFE_0_RDI_CFG_x_RDI_STREAM_SEL_SHIFT) &
- VFE_0_RDI_CFG_x_RDI_STREAM_SEL_MASK;
- vfe_reg_set(vfe, VFE_0_RDI_CFG_x(id), reg);
-
- switch (id) {
- case VFE_LINE_RDI0:
- default:
- reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI0 <<
- VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
- break;
- case VFE_LINE_RDI1:
- reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI1 <<
- VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
- break;
- case VFE_LINE_RDI2:
- reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI2 <<
- VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
- break;
- }
-
- if (wm % 2 == 1)
- reg <<= 16;
-
- vfe_reg_set(vfe, VFE_0_BUS_XBAR_CFG_x(wm), reg);
-}
-
-static void vfe_wm_set_subsample(struct vfe_device *vfe, u8 wm)
-{
- writel_relaxed(VFE_0_BUS_IMAGE_MASTER_n_WR_IRQ_SUBSAMPLE_PATTERN_DEF,
- vfe->base +
- VFE_0_BUS_IMAGE_MASTER_n_WR_IRQ_SUBSAMPLE_PATTERN(wm));
-}
-
-static void vfe_bus_disconnect_wm_from_rdi(struct vfe_device *vfe, u8 wm,
- enum vfe_line_id id)
-{
- u32 reg;
-
- reg = VFE_0_RDI_CFG_x_RDI_Mr_FRAME_BASED_EN(id);
- vfe_reg_clr(vfe, VFE_0_RDI_CFG_x(0), reg);
-
- reg = VFE_0_RDI_CFG_x_RDI_EN_BIT;
- vfe_reg_clr(vfe, VFE_0_RDI_CFG_x(id), reg);
-
- switch (id) {
- case VFE_LINE_RDI0:
- default:
- reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI0 <<
- VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
- break;
- case VFE_LINE_RDI1:
- reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI1 <<
- VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
- break;
- case VFE_LINE_RDI2:
- reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI2 <<
- VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
- break;
- }
-
- if (wm % 2 == 1)
- reg <<= 16;
-
- vfe_reg_clr(vfe, VFE_0_BUS_XBAR_CFG_x(wm), reg);
-}
-
-static void vfe_set_xbar_cfg(struct vfe_device *vfe, struct vfe_output *output,
- u8 enable)
-{
- struct vfe_line *line = container_of(output, struct vfe_line, output);
- u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
- u32 reg;
- unsigned int i;
-
- for (i = 0; i < output->wm_num; i++) {
- if (i == 0) {
- reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_LUMA <<
- VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
- } else if (i == 1) {
- reg = VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_EN;
- if (p == V4L2_PIX_FMT_NV12 || p == V4L2_PIX_FMT_NV16)
- reg |= VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTER_INTRA;
- } else {
- /* On current devices output->wm_num is always <= 2 */
- break;
- }
-
- if (output->wm_idx[i] % 2 == 1)
- reg <<= 16;
-
- if (enable)
- vfe_reg_set(vfe,
- VFE_0_BUS_XBAR_CFG_x(output->wm_idx[i]),
- reg);
- else
- vfe_reg_clr(vfe,
- VFE_0_BUS_XBAR_CFG_x(output->wm_idx[i]),
- reg);
- }
-}
-
-static void vfe_set_rdi_cid(struct vfe_device *vfe, enum vfe_line_id id, u8 cid)
-{
- vfe_reg_clr(vfe, VFE_0_RDI_CFG_x(id),
- VFE_0_RDI_CFG_x_RDI_M0_SEL_MASK);
-
- vfe_reg_set(vfe, VFE_0_RDI_CFG_x(id),
- cid << VFE_0_RDI_CFG_x_RDI_M0_SEL_SHIFT);
-}
-
-static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
-{
- vfe->reg_update |= VFE_0_REG_UPDATE_line_n(line_id);
- wmb();
- writel_relaxed(vfe->reg_update, vfe->base + VFE_0_REG_UPDATE);
- wmb();
-}
-
-static void vfe_enable_irq_wm_line(struct vfe_device *vfe, u8 wm,
- enum vfe_line_id line_id, u8 enable)
-{
- u32 irq_en0 = VFE_0_IRQ_MASK_0_IMAGE_MASTER_n_PING_PONG(wm) |
- VFE_0_IRQ_MASK_0_line_n_REG_UPDATE(line_id);
- u32 irq_en1 = VFE_0_IRQ_MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(wm) |
- VFE_0_IRQ_MASK_1_RDIn_SOF(line_id);
-
- if (enable) {
- vfe_reg_set(vfe, VFE_0_IRQ_MASK_0, irq_en0);
- vfe_reg_set(vfe, VFE_0_IRQ_MASK_1, irq_en1);
- } else {
- vfe_reg_clr(vfe, VFE_0_IRQ_MASK_0, irq_en0);
- vfe_reg_clr(vfe, VFE_0_IRQ_MASK_1, irq_en1);
- }
-}
-
-static void vfe_enable_irq_pix_line(struct vfe_device *vfe, u8 comp,
- enum vfe_line_id line_id, u8 enable)
-{
- struct vfe_output *output = &vfe->line[line_id].output;
- unsigned int i;
- u32 irq_en0;
- u32 irq_en1;
- u32 comp_mask = 0;
-
- irq_en0 = VFE_0_IRQ_MASK_0_CAMIF_SOF;
- irq_en0 |= VFE_0_IRQ_MASK_0_CAMIF_EOF;
- irq_en0 |= VFE_0_IRQ_MASK_0_IMAGE_COMPOSITE_DONE_n(comp);
- irq_en0 |= VFE_0_IRQ_MASK_0_line_n_REG_UPDATE(line_id);
- irq_en1 = VFE_0_IRQ_MASK_1_CAMIF_ERROR;
- for (i = 0; i < output->wm_num; i++) {
- irq_en1 |= VFE_0_IRQ_MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(
- output->wm_idx[i]);
- comp_mask |= (1 << output->wm_idx[i]) << comp * 8;
- }
-
- if (enable) {
- vfe_reg_set(vfe, VFE_0_IRQ_MASK_0, irq_en0);
- vfe_reg_set(vfe, VFE_0_IRQ_MASK_1, irq_en1);
- vfe_reg_set(vfe, VFE_0_IRQ_COMPOSITE_MASK_0, comp_mask);
- } else {
- vfe_reg_clr(vfe, VFE_0_IRQ_MASK_0, irq_en0);
- vfe_reg_clr(vfe, VFE_0_IRQ_MASK_1, irq_en1);
- vfe_reg_clr(vfe, VFE_0_IRQ_COMPOSITE_MASK_0, comp_mask);
- }
-}
-
-static void vfe_enable_irq_common(struct vfe_device *vfe)
-{
- u32 irq_en0 = VFE_0_IRQ_MASK_0_RESET_ACK;
- u32 irq_en1 = VFE_0_IRQ_MASK_1_VIOLATION |
- VFE_0_IRQ_MASK_1_BUS_BDG_HALT_ACK;
-
- vfe_reg_set(vfe, VFE_0_IRQ_MASK_0, irq_en0);
- vfe_reg_set(vfe, VFE_0_IRQ_MASK_1, irq_en1);
-}
-
-static void vfe_set_demux_cfg(struct vfe_device *vfe, struct vfe_line *line)
-{
- u32 val, even_cfg, odd_cfg;
-
- writel_relaxed(VFE_0_DEMUX_CFG_PERIOD, vfe->base + VFE_0_DEMUX_CFG);
-
- val = VFE_0_DEMUX_GAIN_0_CH0_EVEN | VFE_0_DEMUX_GAIN_0_CH0_ODD;
- writel_relaxed(val, vfe->base + VFE_0_DEMUX_GAIN_0);
-
- val = VFE_0_DEMUX_GAIN_1_CH1 | VFE_0_DEMUX_GAIN_1_CH2;
- writel_relaxed(val, vfe->base + VFE_0_DEMUX_GAIN_1);
-
- switch (line->fmt[MSM_VFE_PAD_SINK].code) {
- case MEDIA_BUS_FMT_YUYV8_2X8:
- even_cfg = VFE_0_DEMUX_EVEN_CFG_PATTERN_YUYV;
- odd_cfg = VFE_0_DEMUX_ODD_CFG_PATTERN_YUYV;
- break;
- case MEDIA_BUS_FMT_YVYU8_2X8:
- even_cfg = VFE_0_DEMUX_EVEN_CFG_PATTERN_YVYU;
- odd_cfg = VFE_0_DEMUX_ODD_CFG_PATTERN_YVYU;
- break;
- case MEDIA_BUS_FMT_UYVY8_2X8:
- default:
- even_cfg = VFE_0_DEMUX_EVEN_CFG_PATTERN_UYVY;
- odd_cfg = VFE_0_DEMUX_ODD_CFG_PATTERN_UYVY;
- break;
- case MEDIA_BUS_FMT_VYUY8_2X8:
- even_cfg = VFE_0_DEMUX_EVEN_CFG_PATTERN_VYUY;
- odd_cfg = VFE_0_DEMUX_ODD_CFG_PATTERN_VYUY;
- break;
- }
-
- writel_relaxed(even_cfg, vfe->base + VFE_0_DEMUX_EVEN_CFG);
- writel_relaxed(odd_cfg, vfe->base + VFE_0_DEMUX_ODD_CFG);
-}
-
-static inline u8 vfe_calc_interp_reso(u16 input, u16 output)
-{
- if (input / output >= 16)
- return 0;
-
- if (input / output >= 8)
- return 1;
-
- if (input / output >= 4)
- return 2;
-
- return 3;
-}
-
-static void vfe_set_scale_cfg(struct vfe_device *vfe, struct vfe_line *line)
-{
- u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
- u32 reg;
- u16 input, output;
- u8 interp_reso;
- u32 phase_mult;
-
- writel_relaxed(0x3, vfe->base + VFE_0_SCALE_ENC_Y_CFG);
-
- input = line->fmt[MSM_VFE_PAD_SINK].width;
- output = line->compose.width;
- reg = (output << 16) | input;
- writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_H_IMAGE_SIZE);
-
- interp_reso = vfe_calc_interp_reso(input, output);
- phase_mult = input * (1 << (13 + interp_reso)) / output;
- reg = (interp_reso << 20) | phase_mult;
- writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_H_PHASE);
-
- input = line->fmt[MSM_VFE_PAD_SINK].height;
- output = line->compose.height;
- reg = (output << 16) | input;
- writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_V_IMAGE_SIZE);
-
- interp_reso = vfe_calc_interp_reso(input, output);
- phase_mult = input * (1 << (13 + interp_reso)) / output;
- reg = (interp_reso << 20) | phase_mult;
- writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_V_PHASE);
-
- writel_relaxed(0x3, vfe->base + VFE_0_SCALE_ENC_CBCR_CFG);
-
- input = line->fmt[MSM_VFE_PAD_SINK].width;
- output = line->compose.width / 2;
- reg = (output << 16) | input;
- writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_H_IMAGE_SIZE);
-
- interp_reso = vfe_calc_interp_reso(input, output);
- phase_mult = input * (1 << (13 + interp_reso)) / output;
- reg = (interp_reso << 20) | phase_mult;
- writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_H_PHASE);
-
- input = line->fmt[MSM_VFE_PAD_SINK].height;
- output = line->compose.height;
- if (p == V4L2_PIX_FMT_NV12 || p == V4L2_PIX_FMT_NV21)
- output = line->compose.height / 2;
- reg = (output << 16) | input;
- writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_V_IMAGE_SIZE);
-
- interp_reso = vfe_calc_interp_reso(input, output);
- phase_mult = input * (1 << (13 + interp_reso)) / output;
- reg = (interp_reso << 20) | phase_mult;
- writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_V_PHASE);
-}
-
-static void vfe_set_crop_cfg(struct vfe_device *vfe, struct vfe_line *line)
-{
- u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
- u32 reg;
- u16 first, last;
-
- first = line->crop.left;
- last = line->crop.left + line->crop.width - 1;
- reg = (first << 16) | last;
- writel_relaxed(reg, vfe->base + VFE_0_CROP_ENC_Y_WIDTH);
-
- first = line->crop.top;
- last = line->crop.top + line->crop.height - 1;
- reg = (first << 16) | last;
- writel_relaxed(reg, vfe->base + VFE_0_CROP_ENC_Y_HEIGHT);
-
- first = line->crop.left / 2;
- last = line->crop.left / 2 + line->crop.width / 2 - 1;
- reg = (first << 16) | last;
- writel_relaxed(reg, vfe->base + VFE_0_CROP_ENC_CBCR_WIDTH);
-
- first = line->crop.top;
- last = line->crop.top + line->crop.height - 1;
- if (p == V4L2_PIX_FMT_NV12 || p == V4L2_PIX_FMT_NV21) {
- first = line->crop.top / 2;
- last = line->crop.top / 2 + line->crop.height / 2 - 1;
- }
- reg = (first << 16) | last;
- writel_relaxed(reg, vfe->base + VFE_0_CROP_ENC_CBCR_HEIGHT);
-}
-
-static void vfe_set_clamp_cfg(struct vfe_device *vfe)
-{
- u32 val = VFE_0_CLAMP_ENC_MAX_CFG_CH0 |
- VFE_0_CLAMP_ENC_MAX_CFG_CH1 |
- VFE_0_CLAMP_ENC_MAX_CFG_CH2;
-
- writel_relaxed(val, vfe->base + VFE_0_CLAMP_ENC_MAX_CFG);
-
- val = VFE_0_CLAMP_ENC_MIN_CFG_CH0 |
- VFE_0_CLAMP_ENC_MIN_CFG_CH1 |
- VFE_0_CLAMP_ENC_MIN_CFG_CH2;
-
- writel_relaxed(val, vfe->base + VFE_0_CLAMP_ENC_MIN_CFG);
-}
-
-/*
- * vfe_reset - Trigger reset on VFE module and wait to complete
- * @vfe: VFE device
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_reset(struct vfe_device *vfe)
-{
- unsigned long time;
-
- reinit_completion(&vfe->reset_complete);
-
- vfe_global_reset(vfe);
-
- time = wait_for_completion_timeout(&vfe->reset_complete,
- msecs_to_jiffies(VFE_RESET_TIMEOUT_MS));
- if (!time) {
- dev_err(to_device(vfe), "VFE reset timeout\n");
- return -EIO;
- }
-
- return 0;
-}
-
-/*
- * vfe_halt - Trigger halt on VFE module and wait to complete
- * @vfe: VFE device
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_halt(struct vfe_device *vfe)
-{
- unsigned long time;
-
- reinit_completion(&vfe->halt_complete);
-
- writel_relaxed(VFE_0_BUS_BDG_CMD_HALT_REQ,
- vfe->base + VFE_0_BUS_BDG_CMD);
-
- time = wait_for_completion_timeout(&vfe->halt_complete,
- msecs_to_jiffies(VFE_HALT_TIMEOUT_MS));
- if (!time) {
- dev_err(to_device(vfe), "VFE halt timeout\n");
- return -EIO;
- }
-
- return 0;
-}
-
-static void vfe_init_outputs(struct vfe_device *vfe)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(vfe->line); i++) {
- struct vfe_output *output = &vfe->line[i].output;
-
- output->state = VFE_OUTPUT_OFF;
- output->buf[0] = NULL;
- output->buf[1] = NULL;
- INIT_LIST_HEAD(&output->pending_bufs);
-
- output->wm_num = 1;
- if (vfe->line[i].id == VFE_LINE_PIX)
- output->wm_num = 2;
- }
-}
-
-static void vfe_reset_output_maps(struct vfe_device *vfe)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(vfe->wm_output_map); i++)
- vfe->wm_output_map[i] = VFE_LINE_NONE;
-}
-
-static void vfe_set_qos(struct vfe_device *vfe)
-{
- u32 val = VFE_0_BUS_BDG_QOS_CFG_0_CFG;
- u32 val7 = VFE_0_BUS_BDG_QOS_CFG_7_CFG;
-
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_0);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_1);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_2);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_3);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_4);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_5);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_6);
- writel_relaxed(val7, vfe->base + VFE_0_BUS_BDG_QOS_CFG_7);
-}
-
-static void vfe_set_cgc_override(struct vfe_device *vfe, u8 wm, u8 enable)
-{
- u32 val = VFE_0_CGC_OVERRIDE_1_IMAGE_Mx_CGC_OVERRIDE(wm);
-
- if (enable)
- vfe_reg_set(vfe, VFE_0_CGC_OVERRIDE_1, val);
- else
- vfe_reg_clr(vfe, VFE_0_CGC_OVERRIDE_1, val);
-
- wmb();
-}
-
-static void vfe_set_module_cfg(struct vfe_device *vfe, u8 enable)
-{
- u32 val = VFE_0_MODULE_CFG_DEMUX |
- VFE_0_MODULE_CFG_CHROMA_UPSAMPLE |
- VFE_0_MODULE_CFG_SCALE_ENC |
- VFE_0_MODULE_CFG_CROP_ENC;
-
- if (enable)
- writel_relaxed(val, vfe->base + VFE_0_MODULE_CFG);
- else
- writel_relaxed(0x0, vfe->base + VFE_0_MODULE_CFG);
-}
-
-static void vfe_set_camif_cfg(struct vfe_device *vfe, struct vfe_line *line)
-{
- u32 val;
-
- switch (line->fmt[MSM_VFE_PAD_SINK].code) {
- case MEDIA_BUS_FMT_YUYV8_2X8:
- val = VFE_0_CORE_CFG_PIXEL_PATTERN_YCBYCR;
- break;
- case MEDIA_BUS_FMT_YVYU8_2X8:
- val = VFE_0_CORE_CFG_PIXEL_PATTERN_YCRYCB;
- break;
- case MEDIA_BUS_FMT_UYVY8_2X8:
- default:
- val = VFE_0_CORE_CFG_PIXEL_PATTERN_CBYCRY;
- break;
- case MEDIA_BUS_FMT_VYUY8_2X8:
- val = VFE_0_CORE_CFG_PIXEL_PATTERN_CRYCBY;
- break;
- }
-
- writel_relaxed(val, vfe->base + VFE_0_CORE_CFG);
-
- val = line->fmt[MSM_VFE_PAD_SINK].width * 2;
- val |= line->fmt[MSM_VFE_PAD_SINK].height << 16;
- writel_relaxed(val, vfe->base + VFE_0_CAMIF_FRAME_CFG);
-
- val = line->fmt[MSM_VFE_PAD_SINK].width * 2 - 1;
- writel_relaxed(val, vfe->base + VFE_0_CAMIF_WINDOW_WIDTH_CFG);
-
- val = line->fmt[MSM_VFE_PAD_SINK].height - 1;
- writel_relaxed(val, vfe->base + VFE_0_CAMIF_WINDOW_HEIGHT_CFG);
-
- val = 0xffffffff;
- writel_relaxed(val, vfe->base + VFE_0_CAMIF_SUBSAMPLE_CFG_0);
-
- val = 0xffffffff;
- writel_relaxed(val, vfe->base + VFE_0_CAMIF_IRQ_SUBSAMPLE_PATTERN);
-
- val = VFE_0_RDI_CFG_x_MIPI_EN_BITS;
- vfe_reg_set(vfe, VFE_0_RDI_CFG_x(0), val);
-
- val = VFE_0_CAMIF_CFG_VFE_OUTPUT_EN;
- writel_relaxed(val, vfe->base + VFE_0_CAMIF_CFG);
-}
-
-static void vfe_set_camif_cmd(struct vfe_device *vfe, u32 cmd)
-{
- writel_relaxed(VFE_0_CAMIF_CMD_CLEAR_CAMIF_STATUS,
- vfe->base + VFE_0_CAMIF_CMD);
-
- writel_relaxed(cmd, vfe->base + VFE_0_CAMIF_CMD);
-}
-
-static int vfe_camif_wait_for_stop(struct vfe_device *vfe)
-{
- u32 val;
- int ret;
-
- ret = readl_poll_timeout(vfe->base + VFE_0_CAMIF_STATUS,
- val,
- (val & VFE_0_CAMIF_STATUS_HALT),
- CAMIF_TIMEOUT_SLEEP_US,
- CAMIF_TIMEOUT_ALL_US);
- if (ret < 0)
- dev_err(to_device(vfe), "%s: camif stop timeout\n", __func__);
-
- return ret;
-}
-
-static void vfe_output_init_addrs(struct vfe_device *vfe,
- struct vfe_output *output, u8 sync)
-{
- u32 ping_addr;
- u32 pong_addr;
- unsigned int i;
-
- output->active_buf = 0;
-
- for (i = 0; i < output->wm_num; i++) {
- if (output->buf[0])
- ping_addr = output->buf[0]->addr[i];
- else
- ping_addr = 0;
-
- if (output->buf[1])
- pong_addr = output->buf[1]->addr[i];
- else
- pong_addr = ping_addr;
-
- vfe_wm_set_ping_addr(vfe, output->wm_idx[i], ping_addr);
- vfe_wm_set_pong_addr(vfe, output->wm_idx[i], pong_addr);
- if (sync)
- vfe_bus_reload_wm(vfe, output->wm_idx[i]);
- }
-}
-
-static void vfe_output_update_ping_addr(struct vfe_device *vfe,
- struct vfe_output *output, u8 sync)
-{
- u32 addr;
- unsigned int i;
-
- for (i = 0; i < output->wm_num; i++) {
- if (output->buf[0])
- addr = output->buf[0]->addr[i];
- else
- addr = 0;
-
- vfe_wm_set_ping_addr(vfe, output->wm_idx[i], addr);
- if (sync)
- vfe_bus_reload_wm(vfe, output->wm_idx[i]);
- }
-}
-
-static void vfe_output_update_pong_addr(struct vfe_device *vfe,
- struct vfe_output *output, u8 sync)
-{
- u32 addr;
- unsigned int i;
-
- for (i = 0; i < output->wm_num; i++) {
- if (output->buf[1])
- addr = output->buf[1]->addr[i];
- else
- addr = 0;
-
- vfe_wm_set_pong_addr(vfe, output->wm_idx[i], addr);
- if (sync)
- vfe_bus_reload_wm(vfe, output->wm_idx[i]);
- }
-
-}
-
-static int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id)
-{
- int ret = -EBUSY;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(vfe->wm_output_map); i++) {
- if (vfe->wm_output_map[i] == VFE_LINE_NONE) {
- vfe->wm_output_map[i] = line_id;
- ret = i;
- break;
- }
- }
-
- return ret;
-}
-
-static int vfe_release_wm(struct vfe_device *vfe, u8 wm)
-{
- if (wm >= ARRAY_SIZE(vfe->wm_output_map))
- return -EINVAL;
-
- vfe->wm_output_map[wm] = VFE_LINE_NONE;
-
- return 0;
-}
-
-static void vfe_output_frame_drop(struct vfe_device *vfe,
- struct vfe_output *output,
- u32 drop_pattern)
-{
- u8 drop_period;
- unsigned int i;
-
- /* We need to toggle update period to be valid on next frame */
- output->drop_update_idx++;
- output->drop_update_idx %= VFE_FRAME_DROP_UPDATES;
- drop_period = VFE_FRAME_DROP_VAL + output->drop_update_idx;
-
- for (i = 0; i < output->wm_num; i++) {
- vfe_wm_set_framedrop_period(vfe, output->wm_idx[i],
- drop_period);
- vfe_wm_set_framedrop_pattern(vfe, output->wm_idx[i],
- drop_pattern);
- }
- vfe_reg_update(vfe, container_of(output, struct vfe_line, output)->id);
-}
-
-static struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output)
-{
- struct camss_buffer *buffer = NULL;
-
- if (!list_empty(&output->pending_bufs)) {
- buffer = list_first_entry(&output->pending_bufs,
- struct camss_buffer,
- queue);
- list_del(&buffer->queue);
- }
-
- return buffer;
-}
-
-/*
- * vfe_buf_add_pending - Add output buffer to list of pending
- * @output: VFE output
- * @buffer: Video buffer
- */
-static void vfe_buf_add_pending(struct vfe_output *output,
- struct camss_buffer *buffer)
-{
- INIT_LIST_HEAD(&buffer->queue);
- list_add_tail(&buffer->queue, &output->pending_bufs);
-}
-
-/*
- * vfe_buf_flush_pending - Flush all pending buffers.
- * @output: VFE output
- * @state: vb2 buffer state
- */
-static void vfe_buf_flush_pending(struct vfe_output *output,
- enum vb2_buffer_state state)
-{
- struct camss_buffer *buf;
- struct camss_buffer *t;
-
- list_for_each_entry_safe(buf, t, &output->pending_bufs, queue) {
- vb2_buffer_done(&buf->vb.vb2_buf, state);
- list_del(&buf->queue);
- }
-}
-
-static void vfe_buf_update_wm_on_next(struct vfe_device *vfe,
- struct vfe_output *output)
-{
- switch (output->state) {
- case VFE_OUTPUT_CONTINUOUS:
- vfe_output_frame_drop(vfe, output, 3);
- break;
- case VFE_OUTPUT_SINGLE:
- default:
- dev_err_ratelimited(to_device(vfe),
- "Next buf in wrong state! %d\n",
- output->state);
- break;
- }
-}
-
-static void vfe_buf_update_wm_on_last(struct vfe_device *vfe,
- struct vfe_output *output)
-{
- switch (output->state) {
- case VFE_OUTPUT_CONTINUOUS:
- output->state = VFE_OUTPUT_SINGLE;
- vfe_output_frame_drop(vfe, output, 1);
- break;
- case VFE_OUTPUT_SINGLE:
- output->state = VFE_OUTPUT_STOPPING;
- vfe_output_frame_drop(vfe, output, 0);
- break;
- default:
- dev_err_ratelimited(to_device(vfe),
- "Last buff in wrong state! %d\n",
- output->state);
- break;
- }
-}
-
-static void vfe_buf_update_wm_on_new(struct vfe_device *vfe,
- struct vfe_output *output,
- struct camss_buffer *new_buf)
-{
- int inactive_idx;
-
- switch (output->state) {
- case VFE_OUTPUT_SINGLE:
- inactive_idx = !output->active_buf;
-
- if (!output->buf[inactive_idx]) {
- output->buf[inactive_idx] = new_buf;
-
- if (inactive_idx)
- vfe_output_update_pong_addr(vfe, output, 0);
- else
- vfe_output_update_ping_addr(vfe, output, 0);
-
- vfe_output_frame_drop(vfe, output, 3);
- output->state = VFE_OUTPUT_CONTINUOUS;
- } else {
- vfe_buf_add_pending(output, new_buf);
- dev_err_ratelimited(to_device(vfe),
- "Inactive buffer is busy\n");
- }
- break;
-
- case VFE_OUTPUT_IDLE:
- if (!output->buf[0]) {
- output->buf[0] = new_buf;
-
- vfe_output_init_addrs(vfe, output, 1);
-
- vfe_output_frame_drop(vfe, output, 1);
- output->state = VFE_OUTPUT_SINGLE;
- } else {
- vfe_buf_add_pending(output, new_buf);
- dev_err_ratelimited(to_device(vfe),
- "Output idle with buffer set!\n");
- }
- break;
-
- case VFE_OUTPUT_CONTINUOUS:
- default:
- vfe_buf_add_pending(output, new_buf);
- break;
- }
-}
-
-static int vfe_get_output(struct vfe_line *line)
-{
- struct vfe_device *vfe = to_vfe(line);
- struct vfe_output *output;
- unsigned long flags;
- int i;
- int wm_idx;
-
- spin_lock_irqsave(&vfe->output_lock, flags);
-
- output = &line->output;
- if (output->state != VFE_OUTPUT_OFF) {
- dev_err(to_device(vfe), "Output is running\n");
- goto error;
- }
- output->state = VFE_OUTPUT_RESERVED;
-
- output->active_buf = 0;
-
- for (i = 0; i < output->wm_num; i++) {
- wm_idx = vfe_reserve_wm(vfe, line->id);
- if (wm_idx < 0) {
- dev_err(to_device(vfe), "Can not reserve wm\n");
- goto error_get_wm;
- }
- output->wm_idx[i] = wm_idx;
- }
-
- output->drop_update_idx = 0;
-
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- return 0;
-
-error_get_wm:
- for (i--; i >= 0; i--)
- vfe_release_wm(vfe, output->wm_idx[i]);
- output->state = VFE_OUTPUT_OFF;
-error:
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- return -EINVAL;
-}
-
-static int vfe_put_output(struct vfe_line *line)
-{
- struct vfe_device *vfe = to_vfe(line);
- struct vfe_output *output = &line->output;
- unsigned long flags;
- unsigned int i;
-
- spin_lock_irqsave(&vfe->output_lock, flags);
-
- for (i = 0; i < output->wm_num; i++)
- vfe_release_wm(vfe, output->wm_idx[i]);
-
- output->state = VFE_OUTPUT_OFF;
-
- spin_unlock_irqrestore(&vfe->output_lock, flags);
- return 0;
-}
-
-static int vfe_enable_output(struct vfe_line *line)
-{
- struct vfe_device *vfe = to_vfe(line);
- struct vfe_output *output = &line->output;
- unsigned long flags;
- unsigned int i;
- u16 ub_size;
-
- switch (vfe->id) {
- case 0:
- ub_size = MSM_VFE_VFE0_UB_SIZE_RDI;
- break;
- case 1:
- ub_size = MSM_VFE_VFE1_UB_SIZE_RDI;
- break;
- default:
- return -EINVAL;
- }
-
- spin_lock_irqsave(&vfe->output_lock, flags);
-
- vfe->reg_update &= ~VFE_0_REG_UPDATE_line_n(line->id);
-
- if (output->state != VFE_OUTPUT_RESERVED) {
- dev_err(to_device(vfe), "Output is not in reserved state %d\n",
- output->state);
- spin_unlock_irqrestore(&vfe->output_lock, flags);
- return -EINVAL;
- }
- output->state = VFE_OUTPUT_IDLE;
-
- output->buf[0] = vfe_buf_get_pending(output);
- output->buf[1] = vfe_buf_get_pending(output);
-
- if (!output->buf[0] && output->buf[1]) {
- output->buf[0] = output->buf[1];
- output->buf[1] = NULL;
- }
-
- if (output->buf[0])
- output->state = VFE_OUTPUT_SINGLE;
-
- if (output->buf[1])
- output->state = VFE_OUTPUT_CONTINUOUS;
-
- switch (output->state) {
- case VFE_OUTPUT_SINGLE:
- vfe_output_frame_drop(vfe, output, 1);
- break;
- case VFE_OUTPUT_CONTINUOUS:
- vfe_output_frame_drop(vfe, output, 3);
- break;
- default:
- vfe_output_frame_drop(vfe, output, 0);
- break;
- }
-
- output->sequence = 0;
- output->wait_sof = 0;
- output->wait_reg_update = 0;
- reinit_completion(&output->sof);
- reinit_completion(&output->reg_update);
-
- vfe_output_init_addrs(vfe, output, 0);
-
- if (line->id != VFE_LINE_PIX) {
- vfe_set_cgc_override(vfe, output->wm_idx[0], 1);
- vfe_enable_irq_wm_line(vfe, output->wm_idx[0], line->id, 1);
- vfe_bus_connect_wm_to_rdi(vfe, output->wm_idx[0], line->id);
- vfe_wm_set_subsample(vfe, output->wm_idx[0]);
- vfe_set_rdi_cid(vfe, line->id, 0);
- vfe_wm_set_ub_cfg(vfe, output->wm_idx[0],
- (ub_size + 1) * output->wm_idx[0], ub_size);
- vfe_wm_frame_based(vfe, output->wm_idx[0], 1);
- vfe_wm_enable(vfe, output->wm_idx[0], 1);
- vfe_bus_reload_wm(vfe, output->wm_idx[0]);
- } else {
- ub_size /= output->wm_num;
- for (i = 0; i < output->wm_num; i++) {
- vfe_set_cgc_override(vfe, output->wm_idx[i], 1);
- vfe_wm_set_subsample(vfe, output->wm_idx[i]);
- vfe_wm_set_ub_cfg(vfe, output->wm_idx[i],
- (ub_size + 1) * output->wm_idx[i],
- ub_size);
- vfe_wm_line_based(vfe, output->wm_idx[i],
- &line->video_out.active_fmt.fmt.pix_mp,
- i, 1);
- vfe_wm_enable(vfe, output->wm_idx[i], 1);
- vfe_bus_reload_wm(vfe, output->wm_idx[i]);
- }
- vfe_enable_irq_pix_line(vfe, 0, line->id, 1);
- vfe_set_module_cfg(vfe, 1);
- vfe_set_camif_cfg(vfe, line);
- vfe_set_xbar_cfg(vfe, output, 1);
- vfe_set_demux_cfg(vfe, line);
- vfe_set_scale_cfg(vfe, line);
- vfe_set_crop_cfg(vfe, line);
- vfe_set_clamp_cfg(vfe);
- vfe_set_camif_cmd(vfe, VFE_0_CAMIF_CMD_ENABLE_FRAME_BOUNDARY);
- }
-
- vfe_reg_update(vfe, line->id);
-
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- return 0;
-}
-
-static int vfe_disable_output(struct vfe_line *line)
-{
- struct vfe_device *vfe = to_vfe(line);
- struct vfe_output *output = &line->output;
- unsigned long flags;
- unsigned long time;
- unsigned int i;
-
- spin_lock_irqsave(&vfe->output_lock, flags);
-
- output->wait_sof = 1;
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- time = wait_for_completion_timeout(&output->sof,
- msecs_to_jiffies(VFE_NEXT_SOF_MS));
- if (!time)
- dev_err(to_device(vfe), "VFE sof timeout\n");
-
- spin_lock_irqsave(&vfe->output_lock, flags);
- for (i = 0; i < output->wm_num; i++)
- vfe_wm_enable(vfe, output->wm_idx[i], 0);
-
- vfe_reg_update(vfe, line->id);
- output->wait_reg_update = 1;
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- time = wait_for_completion_timeout(&output->reg_update,
- msecs_to_jiffies(VFE_NEXT_SOF_MS));
- if (!time)
- dev_err(to_device(vfe), "VFE reg update timeout\n");
-
- spin_lock_irqsave(&vfe->output_lock, flags);
-
- if (line->id != VFE_LINE_PIX) {
- vfe_wm_frame_based(vfe, output->wm_idx[0], 0);
- vfe_bus_disconnect_wm_from_rdi(vfe, output->wm_idx[0], line->id);
- vfe_enable_irq_wm_line(vfe, output->wm_idx[0], line->id, 0);
- vfe_set_cgc_override(vfe, output->wm_idx[0], 0);
- spin_unlock_irqrestore(&vfe->output_lock, flags);
- } else {
- for (i = 0; i < output->wm_num; i++) {
- vfe_wm_line_based(vfe, output->wm_idx[i], NULL, i, 0);
- vfe_set_cgc_override(vfe, output->wm_idx[i], 0);
- }
-
- vfe_enable_irq_pix_line(vfe, 0, line->id, 0);
- vfe_set_module_cfg(vfe, 0);
- vfe_set_xbar_cfg(vfe, output, 0);
-
- vfe_set_camif_cmd(vfe, VFE_0_CAMIF_CMD_DISABLE_FRAME_BOUNDARY);
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- vfe_camif_wait_for_stop(vfe);
- }
-
- return 0;
-}
-
-/*
- * vfe_enable - Enable streaming on VFE line
- * @line: VFE line
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_enable(struct vfe_line *line)
-{
- struct vfe_device *vfe = to_vfe(line);
- int ret;
-
- mutex_lock(&vfe->stream_lock);
-
- if (!vfe->stream_count) {
- vfe_enable_irq_common(vfe);
-
- vfe_bus_enable_wr_if(vfe, 1);
-
- vfe_set_qos(vfe);
- }
-
- vfe->stream_count++;
-
- mutex_unlock(&vfe->stream_lock);
-
- ret = vfe_get_output(line);
- if (ret < 0)
- goto error_get_output;
-
- ret = vfe_enable_output(line);
- if (ret < 0)
- goto error_enable_output;
-
- vfe->was_streaming = 1;
-
- return 0;
-
-
-error_enable_output:
- vfe_put_output(line);
-
-error_get_output:
- mutex_lock(&vfe->stream_lock);
-
- if (vfe->stream_count == 1)
- vfe_bus_enable_wr_if(vfe, 0);
-
- vfe->stream_count--;
-
- mutex_unlock(&vfe->stream_lock);
-
- return ret;
-}
-
-/*
- * vfe_disable - Disable streaming on VFE line
- * @line: VFE line
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_disable(struct vfe_line *line)
-{
- struct vfe_device *vfe = to_vfe(line);
-
- vfe_disable_output(line);
-
- vfe_put_output(line);
-
- mutex_lock(&vfe->stream_lock);
-
- if (vfe->stream_count == 1)
- vfe_bus_enable_wr_if(vfe, 0);
-
- vfe->stream_count--;
-
- mutex_unlock(&vfe->stream_lock);
-
- return 0;
-}
-
-/*
- * vfe_isr_sof - Process start of frame interrupt
- * @vfe: VFE Device
- * @line_id: VFE line
- */
-static void vfe_isr_sof(struct vfe_device *vfe, enum vfe_line_id line_id)
-{
- struct vfe_output *output;
- unsigned long flags;
-
- spin_lock_irqsave(&vfe->output_lock, flags);
- output = &vfe->line[line_id].output;
- if (output->wait_sof) {
- output->wait_sof = 0;
- complete(&output->sof);
- }
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-}
-
-/*
- * vfe_isr_reg_update - Process reg update interrupt
- * @vfe: VFE Device
- * @line_id: VFE line
- */
-static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
-{
- struct vfe_output *output;
- unsigned long flags;
-
- spin_lock_irqsave(&vfe->output_lock, flags);
- vfe->reg_update &= ~VFE_0_REG_UPDATE_line_n(line_id);
-
- output = &vfe->line[line_id].output;
-
- if (output->wait_reg_update) {
- output->wait_reg_update = 0;
- complete(&output->reg_update);
- spin_unlock_irqrestore(&vfe->output_lock, flags);
- return;
- }
-
- if (output->state == VFE_OUTPUT_STOPPING) {
- /* Release last buffer when hw is idle */
- if (output->last_buffer) {
- vb2_buffer_done(&output->last_buffer->vb.vb2_buf,
- VB2_BUF_STATE_DONE);
- output->last_buffer = NULL;
- }
- output->state = VFE_OUTPUT_IDLE;
-
- /* Buffers received in stopping state are queued in */
- /* dma pending queue, start next capture here */
-
- output->buf[0] = vfe_buf_get_pending(output);
- output->buf[1] = vfe_buf_get_pending(output);
-
- if (!output->buf[0] && output->buf[1]) {
- output->buf[0] = output->buf[1];
- output->buf[1] = NULL;
- }
-
- if (output->buf[0])
- output->state = VFE_OUTPUT_SINGLE;
-
- if (output->buf[1])
- output->state = VFE_OUTPUT_CONTINUOUS;
-
- switch (output->state) {
- case VFE_OUTPUT_SINGLE:
- vfe_output_frame_drop(vfe, output, 2);
- break;
- case VFE_OUTPUT_CONTINUOUS:
- vfe_output_frame_drop(vfe, output, 3);
- break;
- default:
- vfe_output_frame_drop(vfe, output, 0);
- break;
- }
-
- vfe_output_init_addrs(vfe, output, 1);
- }
-
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-}
-
-/*
- * vfe_isr_wm_done - Process write master done interrupt
- * @vfe: VFE Device
- * @wm: Write master id
- */
-static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
-{
- struct camss_buffer *ready_buf;
- struct vfe_output *output;
- dma_addr_t *new_addr;
- unsigned long flags;
- u32 active_index;
- u64 ts = ktime_get_ns();
- unsigned int i;
-
- active_index = vfe_wm_get_ping_pong_status(vfe, wm);
-
- spin_lock_irqsave(&vfe->output_lock, flags);
-
- if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
- dev_err_ratelimited(to_device(vfe),
- "Received wm done for unmapped index\n");
- goto out_unlock;
- }
- output = &vfe->line[vfe->wm_output_map[wm]].output;
-
- if (output->active_buf == active_index) {
- dev_err_ratelimited(to_device(vfe),
- "Active buffer mismatch!\n");
- goto out_unlock;
- }
- output->active_buf = active_index;
-
- ready_buf = output->buf[!active_index];
- if (!ready_buf) {
- dev_err_ratelimited(to_device(vfe),
- "Missing ready buf %d %d!\n",
- !active_index, output->state);
- goto out_unlock;
- }
-
- ready_buf->vb.vb2_buf.timestamp = ts;
- ready_buf->vb.sequence = output->sequence++;
-
- /* Get next buffer */
- output->buf[!active_index] = vfe_buf_get_pending(output);
- if (!output->buf[!active_index]) {
- /* No next buffer - set same address */
- new_addr = ready_buf->addr;
- vfe_buf_update_wm_on_last(vfe, output);
- } else {
- new_addr = output->buf[!active_index]->addr;
- vfe_buf_update_wm_on_next(vfe, output);
- }
-
- if (active_index)
- for (i = 0; i < output->wm_num; i++)
- vfe_wm_set_ping_addr(vfe, output->wm_idx[i],
- new_addr[i]);
- else
- for (i = 0; i < output->wm_num; i++)
- vfe_wm_set_pong_addr(vfe, output->wm_idx[i],
- new_addr[i]);
-
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- if (output->state == VFE_OUTPUT_STOPPING)
- output->last_buffer = ready_buf;
- else
- vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
-
- return;
-
-out_unlock:
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-}
-
-/*
- * vfe_isr_wm_done - Process composite image done interrupt
- * @vfe: VFE Device
- * @comp: Composite image id
- */
-static void vfe_isr_comp_done(struct vfe_device *vfe, u8 comp)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(vfe->wm_output_map); i++)
- if (vfe->wm_output_map[i] == VFE_LINE_PIX) {
- vfe_isr_wm_done(vfe, i);
- break;
- }
-}
-
-/*
- * vfe_isr - ISPIF module interrupt handler
- * @irq: Interrupt line
- * @dev: VFE device
- *
- * Return IRQ_HANDLED on success
- */
-static irqreturn_t vfe_isr(int irq, void *dev)
-{
- struct vfe_device *vfe = dev;
- u32 value0, value1;
- u32 violation;
- int i, j;
-
- value0 = readl_relaxed(vfe->base + VFE_0_IRQ_STATUS_0);
- value1 = readl_relaxed(vfe->base + VFE_0_IRQ_STATUS_1);
-
- writel_relaxed(value0, vfe->base + VFE_0_IRQ_CLEAR_0);
- writel_relaxed(value1, vfe->base + VFE_0_IRQ_CLEAR_1);
-
- wmb();
- writel_relaxed(VFE_0_IRQ_CMD_GLOBAL_CLEAR, vfe->base + VFE_0_IRQ_CMD);
-
- if (value0 & VFE_0_IRQ_STATUS_0_RESET_ACK)
- complete(&vfe->reset_complete);
-
- if (value1 & VFE_0_IRQ_STATUS_1_VIOLATION) {
- violation = readl_relaxed(vfe->base + VFE_0_VIOLATION_STATUS);
- dev_err_ratelimited(to_device(vfe),
- "VFE: violation = 0x%08x\n", violation);
- }
-
- if (value1 & VFE_0_IRQ_STATUS_1_BUS_BDG_HALT_ACK) {
- complete(&vfe->halt_complete);
- writel_relaxed(0x0, vfe->base + VFE_0_BUS_BDG_CMD);
- }
-
- for (i = VFE_LINE_RDI0; i <= VFE_LINE_PIX; i++)
- if (value0 & VFE_0_IRQ_STATUS_0_line_n_REG_UPDATE(i))
- vfe_isr_reg_update(vfe, i);
-
- if (value0 & VFE_0_IRQ_STATUS_0_CAMIF_SOF)
- vfe_isr_sof(vfe, VFE_LINE_PIX);
-
- for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
- if (value1 & VFE_0_IRQ_STATUS_1_RDIn_SOF(i))
- vfe_isr_sof(vfe, i);
-
- for (i = 0; i < MSM_VFE_COMPOSITE_IRQ_NUM; i++)
- if (value0 & VFE_0_IRQ_STATUS_0_IMAGE_COMPOSITE_DONE_n(i)) {
- vfe_isr_comp_done(vfe, i);
- for (j = 0; j < ARRAY_SIZE(vfe->wm_output_map); j++)
- if (vfe->wm_output_map[j] == VFE_LINE_PIX)
- value0 &= ~VFE_0_IRQ_MASK_0_IMAGE_MASTER_n_PING_PONG(j);
- }
-
- for (i = 0; i < MSM_VFE_IMAGE_MASTERS_NUM; i++)
- if (value0 & VFE_0_IRQ_STATUS_0_IMAGE_MASTER_n_PING_PONG(i))
- vfe_isr_wm_done(vfe, i);
-
- return IRQ_HANDLED;
-}
-
-/*
- * vfe_set_clock_rates - Calculate and set clock rates on VFE module
- * @vfe: VFE device
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_set_clock_rates(struct vfe_device *vfe)
-{
- struct device *dev = to_device(vfe);
- u32 pixel_clock[MSM_VFE_LINE_NUM];
- int i, j;
- int ret;
-
- for (i = VFE_LINE_RDI0; i <= VFE_LINE_PIX; i++) {
- ret = camss_get_pixel_clock(&vfe->line[i].subdev.entity,
- &pixel_clock[i]);
- if (ret)
- pixel_clock[i] = 0;
- }
-
- for (i = 0; i < vfe->nclocks; i++) {
- struct camss_clock *clock = &vfe->clock[i];
-
- if (!strcmp(clock->name, "camss_vfe_vfe")) {
- u64 min_rate = 0;
- long rate;
-
- for (j = VFE_LINE_RDI0; j <= VFE_LINE_PIX; j++) {
- u32 tmp;
- u8 bpp;
-
- if (j == VFE_LINE_PIX) {
- tmp = pixel_clock[j];
- } else {
- bpp = vfe_get_bpp(vfe->line[j].
- fmt[MSM_VFE_PAD_SINK].code);
- tmp = pixel_clock[j] * bpp / 64;
- }
-
- if (min_rate < tmp)
- min_rate = tmp;
- }
-
- camss_add_clock_margin(&min_rate);
-
- for (j = 0; j < clock->nfreqs; j++)
- if (min_rate < clock->freq[j])
- break;
-
- if (j == clock->nfreqs) {
- dev_err(dev,
- "Pixel clock is too high for VFE");
- return -EINVAL;
- }
-
- /* if sensor pixel clock is not available */
- /* set highest possible VFE clock rate */
- if (min_rate == 0)
- j = clock->nfreqs - 1;
-
- rate = clk_round_rate(clock->clk, clock->freq[j]);
- if (rate < 0) {
- dev_err(dev, "clk round rate failed: %ld\n",
- rate);
- return -EINVAL;
- }
-
- ret = clk_set_rate(clock->clk, rate);
- if (ret < 0) {
- dev_err(dev, "clk set rate failed: %d\n", ret);
- return ret;
- }
- }
- }
-
- return 0;
-}
-
-/*
- * vfe_check_clock_rates - Check current clock rates on VFE module
- * @vfe: VFE device
- *
- * Return 0 if current clock rates are suitable for a new pipeline
- * or a negative error code otherwise
- */
-static int vfe_check_clock_rates(struct vfe_device *vfe)
-{
- u32 pixel_clock[MSM_VFE_LINE_NUM];
- int i, j;
- int ret;
-
- for (i = VFE_LINE_RDI0; i <= VFE_LINE_PIX; i++) {
- ret = camss_get_pixel_clock(&vfe->line[i].subdev.entity,
- &pixel_clock[i]);
- if (ret)
- pixel_clock[i] = 0;
- }
-
- for (i = 0; i < vfe->nclocks; i++) {
- struct camss_clock *clock = &vfe->clock[i];
-
- if (!strcmp(clock->name, "camss_vfe_vfe")) {
- u64 min_rate = 0;
- unsigned long rate;
-
- for (j = VFE_LINE_RDI0; j <= VFE_LINE_PIX; j++) {
- u32 tmp;
- u8 bpp;
-
- if (j == VFE_LINE_PIX) {
- tmp = pixel_clock[j];
- } else {
- bpp = vfe_get_bpp(vfe->line[j].
- fmt[MSM_VFE_PAD_SINK].code);
- tmp = pixel_clock[j] * bpp / 64;
- }
-
- if (min_rate < tmp)
- min_rate = tmp;
- }
-
- camss_add_clock_margin(&min_rate);
-
- rate = clk_get_rate(clock->clk);
- if (rate < min_rate)
- return -EBUSY;
- }
- }
-
- return 0;
-}
-
-/*
- * vfe_get - Power up and reset VFE module
- * @vfe: VFE Device
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_get(struct vfe_device *vfe)
-{
- int ret;
-
- mutex_lock(&vfe->power_lock);
-
- if (vfe->power_count == 0) {
- ret = vfe_set_clock_rates(vfe);
- if (ret < 0)
- goto error_clocks;
-
- ret = camss_enable_clocks(vfe->nclocks, vfe->clock,
- to_device(vfe));
- if (ret < 0)
- goto error_clocks;
-
- ret = vfe_reset(vfe);
- if (ret < 0)
- goto error_reset;
-
- vfe_reset_output_maps(vfe);
-
- vfe_init_outputs(vfe);
- } else {
- ret = vfe_check_clock_rates(vfe);
- if (ret < 0)
- goto error_clocks;
- }
- vfe->power_count++;
-
- mutex_unlock(&vfe->power_lock);
-
- return 0;
-
-error_reset:
- camss_disable_clocks(vfe->nclocks, vfe->clock);
-
-error_clocks:
- mutex_unlock(&vfe->power_lock);
-
- return ret;
-}
-
-/*
- * vfe_put - Power down VFE module
- * @vfe: VFE Device
- */
-static void vfe_put(struct vfe_device *vfe)
-{
- mutex_lock(&vfe->power_lock);
-
- if (vfe->power_count == 0) {
- dev_err(to_device(vfe), "vfe power off on power_count == 0\n");
- goto exit;
- } else if (vfe->power_count == 1) {
- if (vfe->was_streaming) {
- vfe->was_streaming = 0;
- vfe_halt(vfe);
- }
- camss_disable_clocks(vfe->nclocks, vfe->clock);
- }
-
- vfe->power_count--;
-
-exit:
- mutex_unlock(&vfe->power_lock);
-}
-
-/*
- * vfe_video_pad_to_line - Get pointer to VFE line by media pad
- * @pad: Media pad
- *
- * Return pointer to vfe line structure
- */
-static struct vfe_line *vfe_video_pad_to_line(struct media_pad *pad)
-{
- struct media_pad *vfe_pad;
- struct v4l2_subdev *subdev;
-
- vfe_pad = media_entity_remote_pad(pad);
- if (vfe_pad == NULL)
- return NULL;
-
- subdev = media_entity_to_v4l2_subdev(vfe_pad->entity);
-
- return container_of(subdev, struct vfe_line, subdev);
-}
-
-/*
- * vfe_queue_buffer - Add empty buffer
- * @vid: Video device structure
- * @buf: Buffer to be enqueued
- *
- * Add an empty buffer - depending on the current number of buffers it will be
- * put in pending buffer queue or directly given to the hardware to be filled.
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_queue_buffer(struct camss_video *vid,
- struct camss_buffer *buf)
-{
- struct vfe_device *vfe = &vid->camss->vfe;
- struct vfe_line *line;
- struct vfe_output *output;
- unsigned long flags;
-
- line = vfe_video_pad_to_line(&vid->pad);
- if (!line) {
- dev_err(to_device(vfe), "Can not queue buffer\n");
- return -1;
- }
- output = &line->output;
-
- spin_lock_irqsave(&vfe->output_lock, flags);
-
- vfe_buf_update_wm_on_new(vfe, output, buf);
-
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- return 0;
-}
-
-/*
- * vfe_flush_buffers - Return all vb2 buffers
- * @vid: Video device structure
- * @state: vb2 buffer state of the returned buffers
- *
- * Return all buffers to vb2. This includes queued pending buffers (still
- * unused) and any buffers given to the hardware but again still not used.
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_flush_buffers(struct camss_video *vid,
- enum vb2_buffer_state state)
-{
- struct vfe_device *vfe = &vid->camss->vfe;
- struct vfe_line *line;
- struct vfe_output *output;
- unsigned long flags;
-
- line = vfe_video_pad_to_line(&vid->pad);
- if (!line) {
- dev_err(to_device(vfe), "Can not flush buffers\n");
- return -1;
- }
- output = &line->output;
-
- spin_lock_irqsave(&vfe->output_lock, flags);
-
- vfe_buf_flush_pending(output, state);
-
- if (output->buf[0])
- vb2_buffer_done(&output->buf[0]->vb.vb2_buf, state);
-
- if (output->buf[1])
- vb2_buffer_done(&output->buf[1]->vb.vb2_buf, state);
-
- if (output->last_buffer) {
- vb2_buffer_done(&output->last_buffer->vb.vb2_buf, state);
- output->last_buffer = NULL;
- }
-
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- return 0;
-}
-
-/*
- * vfe_set_power - Power on/off VFE module
- * @sd: VFE V4L2 subdevice
- * @on: Requested power state
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_set_power(struct v4l2_subdev *sd, int on)
-{
- struct vfe_line *line = v4l2_get_subdevdata(sd);
- struct vfe_device *vfe = to_vfe(line);
- int ret;
-
- if (on) {
- u32 hw_version;
-
- ret = vfe_get(vfe);
- if (ret < 0)
- return ret;
-
- hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
- dev_dbg(to_device(vfe),
- "VFE HW Version = 0x%08x\n", hw_version);
- } else {
- vfe_put(vfe);
- }
-
- return 0;
-}
-
-/*
- * vfe_set_stream - Enable/disable streaming on VFE module
- * @sd: VFE V4L2 subdevice
- * @enable: Requested streaming state
- *
- * Main configuration of VFE module is triggered here.
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_set_stream(struct v4l2_subdev *sd, int enable)
-{
- struct vfe_line *line = v4l2_get_subdevdata(sd);
- struct vfe_device *vfe = to_vfe(line);
- int ret;
-
- if (enable) {
- ret = vfe_enable(line);
- if (ret < 0)
- dev_err(to_device(vfe),
- "Failed to enable vfe outputs\n");
- } else {
- ret = vfe_disable(line);
- if (ret < 0)
- dev_err(to_device(vfe),
- "Failed to disable vfe outputs\n");
- }
-
- return ret;
-}
-
-/*
- * __vfe_get_format - Get pointer to format structure
- * @line: VFE line
- * @cfg: V4L2 subdev pad configuration
- * @pad: pad from which format is requested
- * @which: TRY or ACTIVE format
- *
- * Return pointer to TRY or ACTIVE format structure
- */
-static struct v4l2_mbus_framefmt *
-__vfe_get_format(struct vfe_line *line,
- struct v4l2_subdev_pad_config *cfg,
- unsigned int pad,
- enum v4l2_subdev_format_whence which)
-{
- if (which == V4L2_SUBDEV_FORMAT_TRY)
- return v4l2_subdev_get_try_format(&line->subdev, cfg, pad);
-
- return &line->fmt[pad];
-}
-
-/*
- * __vfe_get_compose - Get pointer to compose selection structure
- * @line: VFE line
- * @cfg: V4L2 subdev pad configuration
- * @which: TRY or ACTIVE format
- *
- * Return pointer to TRY or ACTIVE compose rectangle structure
- */
-static struct v4l2_rect *
-__vfe_get_compose(struct vfe_line *line,
- struct v4l2_subdev_pad_config *cfg,
- enum v4l2_subdev_format_whence which)
-{
- if (which == V4L2_SUBDEV_FORMAT_TRY)
- return v4l2_subdev_get_try_compose(&line->subdev, cfg,
- MSM_VFE_PAD_SINK);
-
- return &line->compose;
-}
-
-/*
- * __vfe_get_crop - Get pointer to crop selection structure
- * @line: VFE line
- * @cfg: V4L2 subdev pad configuration
- * @which: TRY or ACTIVE format
- *
- * Return pointer to TRY or ACTIVE crop rectangle structure
- */
-static struct v4l2_rect *
-__vfe_get_crop(struct vfe_line *line,
- struct v4l2_subdev_pad_config *cfg,
- enum v4l2_subdev_format_whence which)
-{
- if (which == V4L2_SUBDEV_FORMAT_TRY)
- return v4l2_subdev_get_try_crop(&line->subdev, cfg,
- MSM_VFE_PAD_SRC);
-
- return &line->crop;
-}
-
-/*
- * vfe_try_format - Handle try format by pad subdev method
- * @line: VFE line
- * @cfg: V4L2 subdev pad configuration
- * @pad: pad on which format is requested
- * @fmt: pointer to v4l2 format structure
- * @which: wanted subdev format
- */
-static void vfe_try_format(struct vfe_line *line,
- struct v4l2_subdev_pad_config *cfg,
- unsigned int pad,
- struct v4l2_mbus_framefmt *fmt,
- enum v4l2_subdev_format_whence which)
-{
- unsigned int i;
- u32 code;
-
- switch (pad) {
- case MSM_VFE_PAD_SINK:
- /* Set format on sink pad */
-
- for (i = 0; i < ARRAY_SIZE(vfe_formats); i++)
- if (fmt->code == vfe_formats[i].code)
- break;
-
- /* If not found, use UYVY as default */
- if (i >= ARRAY_SIZE(vfe_formats))
- fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
-
- fmt->width = clamp_t(u32, fmt->width, 1, 8191);
- fmt->height = clamp_t(u32, fmt->height, 1, 8191);
-
- fmt->field = V4L2_FIELD_NONE;
- fmt->colorspace = V4L2_COLORSPACE_SRGB;
-
- break;
-
- case MSM_VFE_PAD_SRC:
- /* Set and return a format same as sink pad */
-
- code = fmt->code;
-
- *fmt = *__vfe_get_format(line, cfg, MSM_VFE_PAD_SINK,
- which);
-
- if (line->id == VFE_LINE_PIX) {
- struct v4l2_rect *rect;
-
- rect = __vfe_get_crop(line, cfg, which);
-
- fmt->width = rect->width;
- fmt->height = rect->height;
-
- switch (fmt->code) {
- case MEDIA_BUS_FMT_YUYV8_2X8:
- if (code == MEDIA_BUS_FMT_YUYV8_1_5X8)
- fmt->code = MEDIA_BUS_FMT_YUYV8_1_5X8;
- else
- fmt->code = MEDIA_BUS_FMT_YUYV8_2X8;
- break;
- case MEDIA_BUS_FMT_YVYU8_2X8:
- if (code == MEDIA_BUS_FMT_YVYU8_1_5X8)
- fmt->code = MEDIA_BUS_FMT_YVYU8_1_5X8;
- else
- fmt->code = MEDIA_BUS_FMT_YVYU8_2X8;
- break;
- case MEDIA_BUS_FMT_UYVY8_2X8:
- default:
- if (code == MEDIA_BUS_FMT_UYVY8_1_5X8)
- fmt->code = MEDIA_BUS_FMT_UYVY8_1_5X8;
- else
- fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
- break;
- case MEDIA_BUS_FMT_VYUY8_2X8:
- if (code == MEDIA_BUS_FMT_VYUY8_1_5X8)
- fmt->code = MEDIA_BUS_FMT_VYUY8_1_5X8;
- else
- fmt->code = MEDIA_BUS_FMT_VYUY8_2X8;
- break;
- }
- }
-
- break;
- }
-
- fmt->colorspace = V4L2_COLORSPACE_SRGB;
-}
-
-/*
- * vfe_try_compose - Handle try compose selection by pad subdev method
- * @line: VFE line
- * @cfg: V4L2 subdev pad configuration
- * @rect: pointer to v4l2 rect structure
- * @which: wanted subdev format
- */
-static void vfe_try_compose(struct vfe_line *line,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_rect *rect,
- enum v4l2_subdev_format_whence which)
-{
- struct v4l2_mbus_framefmt *fmt;
-
- fmt = __vfe_get_format(line, cfg, MSM_VFE_PAD_SINK, which);
-
- if (rect->width > fmt->width)
- rect->width = fmt->width;
-
- if (rect->height > fmt->height)
- rect->height = fmt->height;
-
- if (fmt->width > rect->width * SCALER_RATIO_MAX)
- rect->width = (fmt->width + SCALER_RATIO_MAX - 1) /
- SCALER_RATIO_MAX;
-
- rect->width &= ~0x1;
-
- if (fmt->height > rect->height * SCALER_RATIO_MAX)
- rect->height = (fmt->height + SCALER_RATIO_MAX - 1) /
- SCALER_RATIO_MAX;
-
- if (rect->width < 16)
- rect->width = 16;
-
- if (rect->height < 4)
- rect->height = 4;
-}
-
-/*
- * vfe_try_crop - Handle try crop selection by pad subdev method
- * @line: VFE line
- * @cfg: V4L2 subdev pad configuration
- * @rect: pointer to v4l2 rect structure
- * @which: wanted subdev format
- */
-static void vfe_try_crop(struct vfe_line *line,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_rect *rect,
- enum v4l2_subdev_format_whence which)
-{
- struct v4l2_rect *compose;
-
- compose = __vfe_get_compose(line, cfg, which);
-
- if (rect->width > compose->width)
- rect->width = compose->width;
-
- if (rect->width + rect->left > compose->width)
- rect->left = compose->width - rect->width;
-
- if (rect->height > compose->height)
- rect->height = compose->height;
-
- if (rect->height + rect->top > compose->height)
- rect->top = compose->height - rect->height;
-
- /* wm in line based mode writes multiple of 16 horizontally */
- rect->left += (rect->width & 0xf) >> 1;
- rect->width &= ~0xf;
-
- if (rect->width < 16) {
- rect->left = 0;
- rect->width = 16;
- }
-
- if (rect->height < 4) {
- rect->top = 0;
- rect->height = 4;
- }
-}
-
-/*
- * vfe_enum_mbus_code - Handle pixel format enumeration
- * @sd: VFE V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @code: pointer to v4l2_subdev_mbus_code_enum structure
- *
- * return -EINVAL or zero on success
- */
-static int vfe_enum_mbus_code(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_mbus_code_enum *code)
-{
- struct vfe_line *line = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt *format;
-
- if (code->pad == MSM_VFE_PAD_SINK) {
- if (code->index >= ARRAY_SIZE(vfe_formats))
- return -EINVAL;
-
- code->code = vfe_formats[code->index].code;
- } else {
- if (code->index > 0)
- return -EINVAL;
-
- format = __vfe_get_format(line, cfg, MSM_VFE_PAD_SINK,
- code->which);
-
- code->code = format->code;
- }
-
- return 0;
-}
-
-/*
- * vfe_enum_frame_size - Handle frame size enumeration
- * @sd: VFE V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @fse: pointer to v4l2_subdev_frame_size_enum structure
- *
- * Return -EINVAL or zero on success
- */
-static int vfe_enum_frame_size(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_frame_size_enum *fse)
-{
- struct vfe_line *line = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt format;
-
- if (fse->index != 0)
- return -EINVAL;
-
- format.code = fse->code;
- format.width = 1;
- format.height = 1;
- vfe_try_format(line, cfg, fse->pad, &format, fse->which);
- fse->min_width = format.width;
- fse->min_height = format.height;
-
- if (format.code != fse->code)
- return -EINVAL;
-
- format.code = fse->code;
- format.width = -1;
- format.height = -1;
- vfe_try_format(line, cfg, fse->pad, &format, fse->which);
- fse->max_width = format.width;
- fse->max_height = format.height;
-
- return 0;
-}
-
-/*
- * vfe_get_format - Handle get format by pads subdev method
- * @sd: VFE V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @fmt: pointer to v4l2 subdev format structure
- *
- * Return -EINVAL or zero on success
- */
-static int vfe_get_format(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *fmt)
-{
- struct vfe_line *line = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt *format;
-
- format = __vfe_get_format(line, cfg, fmt->pad, fmt->which);
- if (format == NULL)
- return -EINVAL;
-
- fmt->format = *format;
-
- return 0;
-}
-
-static int vfe_set_selection(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_selection *sel);
-
-/*
- * vfe_set_format - Handle set format by pads subdev method
- * @sd: VFE V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @fmt: pointer to v4l2 subdev format structure
- *
- * Return -EINVAL or zero on success
- */
-static int vfe_set_format(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *fmt)
-{
- struct vfe_line *line = v4l2_get_subdevdata(sd);
- struct v4l2_mbus_framefmt *format;
-
- format = __vfe_get_format(line, cfg, fmt->pad, fmt->which);
- if (format == NULL)
- return -EINVAL;
-
- vfe_try_format(line, cfg, fmt->pad, &fmt->format, fmt->which);
- *format = fmt->format;
-
- if (fmt->pad == MSM_VFE_PAD_SINK) {
- struct v4l2_subdev_selection sel = { 0 };
- int ret;
-
- /* Propagate the format from sink to source */
- format = __vfe_get_format(line, cfg, MSM_VFE_PAD_SRC,
- fmt->which);
-
- *format = fmt->format;
- vfe_try_format(line, cfg, MSM_VFE_PAD_SRC, format,
- fmt->which);
-
- if (line->id != VFE_LINE_PIX)
- return 0;
-
- /* Reset sink pad compose selection */
- sel.which = fmt->which;
- sel.pad = MSM_VFE_PAD_SINK;
- sel.target = V4L2_SEL_TGT_COMPOSE;
- sel.r.width = fmt->format.width;
- sel.r.height = fmt->format.height;
- ret = vfe_set_selection(sd, cfg, &sel);
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
-/*
- * vfe_get_selection - Handle get selection by pads subdev method
- * @sd: VFE V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @sel: pointer to v4l2 subdev selection structure
- *
- * Return -EINVAL or zero on success
- */
-static int vfe_get_selection(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_selection *sel)
-{
- struct vfe_line *line = v4l2_get_subdevdata(sd);
- struct v4l2_subdev_format fmt = { 0 };
- struct v4l2_rect *rect;
- int ret;
-
- if (line->id != VFE_LINE_PIX)
- return -EINVAL;
-
- if (sel->pad == MSM_VFE_PAD_SINK)
- switch (sel->target) {
- case V4L2_SEL_TGT_COMPOSE_BOUNDS:
- fmt.pad = sel->pad;
- fmt.which = sel->which;
- ret = vfe_get_format(sd, cfg, &fmt);
- if (ret < 0)
- return ret;
-
- sel->r.left = 0;
- sel->r.top = 0;
- sel->r.width = fmt.format.width;
- sel->r.height = fmt.format.height;
- break;
- case V4L2_SEL_TGT_COMPOSE:
- rect = __vfe_get_compose(line, cfg, sel->which);
- if (rect == NULL)
- return -EINVAL;
-
- sel->r = *rect;
- break;
- default:
- return -EINVAL;
- }
- else if (sel->pad == MSM_VFE_PAD_SRC)
- switch (sel->target) {
- case V4L2_SEL_TGT_CROP_BOUNDS:
- rect = __vfe_get_compose(line, cfg, sel->which);
- if (rect == NULL)
- return -EINVAL;
-
- sel->r.left = rect->left;
- sel->r.top = rect->top;
- sel->r.width = rect->width;
- sel->r.height = rect->height;
- break;
- case V4L2_SEL_TGT_CROP:
- rect = __vfe_get_crop(line, cfg, sel->which);
- if (rect == NULL)
- return -EINVAL;
-
- sel->r = *rect;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-/*
- * vfe_set_selection - Handle set selection by pads subdev method
- * @sd: VFE V4L2 subdevice
- * @cfg: V4L2 subdev pad configuration
- * @sel: pointer to v4l2 subdev selection structure
- *
- * Return -EINVAL or zero on success
- */
-static int vfe_set_selection(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_selection *sel)
-{
- struct vfe_line *line = v4l2_get_subdevdata(sd);
- struct v4l2_rect *rect;
- int ret;
-
- if (line->id != VFE_LINE_PIX)
- return -EINVAL;
-
- if (sel->target == V4L2_SEL_TGT_COMPOSE &&
- sel->pad == MSM_VFE_PAD_SINK) {
- struct v4l2_subdev_selection crop = { 0 };
-
- rect = __vfe_get_compose(line, cfg, sel->which);
- if (rect == NULL)
- return -EINVAL;
-
- vfe_try_compose(line, cfg, &sel->r, sel->which);
- *rect = sel->r;
-
- /* Reset source crop selection */
- crop.which = sel->which;
- crop.pad = MSM_VFE_PAD_SRC;
- crop.target = V4L2_SEL_TGT_CROP;
- crop.r = *rect;
- ret = vfe_set_selection(sd, cfg, &crop);
- } else if (sel->target == V4L2_SEL_TGT_CROP &&
- sel->pad == MSM_VFE_PAD_SRC) {
- struct v4l2_subdev_format fmt = { 0 };
-
- rect = __vfe_get_crop(line, cfg, sel->which);
- if (rect == NULL)
- return -EINVAL;
-
- vfe_try_crop(line, cfg, &sel->r, sel->which);
- *rect = sel->r;
-
- /* Reset source pad format width and height */
- fmt.which = sel->which;
- fmt.pad = MSM_VFE_PAD_SRC;
- ret = vfe_get_format(sd, cfg, &fmt);
- if (ret < 0)
- return ret;
-
- fmt.format.width = rect->width;
- fmt.format.height = rect->height;
- ret = vfe_set_format(sd, cfg, &fmt);
- } else {
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-/*
- * vfe_init_formats - Initialize formats on all pads
- * @sd: VFE V4L2 subdevice
- * @fh: V4L2 subdev file handle
- *
- * Initialize all pad formats with default values.
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
- struct v4l2_subdev_format format = {
- .pad = MSM_VFE_PAD_SINK,
- .which = fh ? V4L2_SUBDEV_FORMAT_TRY :
- V4L2_SUBDEV_FORMAT_ACTIVE,
- .format = {
- .code = MEDIA_BUS_FMT_UYVY8_2X8,
- .width = 1920,
- .height = 1080
- }
- };
-
- return vfe_set_format(sd, fh ? fh->pad : NULL, &format);
-}
-
-/*
- * msm_vfe_subdev_init - Initialize VFE device structure and resources
- * @vfe: VFE device
- * @res: VFE module resources table
- *
- * Return 0 on success or a negative error code otherwise
- */
-int msm_vfe_subdev_init(struct vfe_device *vfe, const struct resources *res)
-{
- struct device *dev = to_device(vfe);
- struct platform_device *pdev = to_platform_device(dev);
- struct resource *r;
- struct camss *camss = to_camss(vfe);
- int i, j;
- int ret;
-
- /* Memory */
-
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[0]);
- vfe->base = devm_ioremap_resource(dev, r);
- if (IS_ERR(vfe->base)) {
- dev_err(dev, "could not map memory\n");
- return PTR_ERR(vfe->base);
- }
-
- /* Interrupt */
-
- r = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
- res->interrupt[0]);
- if (!r) {
- dev_err(dev, "missing IRQ\n");
- return -EINVAL;
- }
-
- vfe->irq = r->start;
- snprintf(vfe->irq_name, sizeof(vfe->irq_name), "%s_%s%d",
- dev_name(dev), MSM_VFE_NAME, vfe->id);
- ret = devm_request_irq(dev, vfe->irq, vfe_isr,
- IRQF_TRIGGER_RISING, vfe->irq_name, vfe);
- if (ret < 0) {
- dev_err(dev, "request_irq failed: %d\n", ret);
- return ret;
- }
-
- /* Clocks */
-
- vfe->nclocks = 0;
- while (res->clock[vfe->nclocks])
- vfe->nclocks++;
-
- vfe->clock = devm_kcalloc(dev, vfe->nclocks, sizeof(*vfe->clock),
- GFP_KERNEL);
- if (!vfe->clock)
- return -ENOMEM;
-
- for (i = 0; i < vfe->nclocks; i++) {
- struct camss_clock *clock = &vfe->clock[i];
-
- clock->clk = devm_clk_get(dev, res->clock[i]);
- if (IS_ERR(clock->clk))
- return PTR_ERR(clock->clk);
-
- clock->name = res->clock[i];
-
- clock->nfreqs = 0;
- while (res->clock_rate[i][clock->nfreqs])
- clock->nfreqs++;
-
- if (!clock->nfreqs) {
- clock->freq = NULL;
- continue;
- }
-
- clock->freq = devm_kcalloc(dev,
- clock->nfreqs,
- sizeof(*clock->freq),
- GFP_KERNEL);
- if (!clock->freq)
- return -ENOMEM;
-
- for (j = 0; j < clock->nfreqs; j++)
- clock->freq[j] = res->clock_rate[i][j];
- }
-
- mutex_init(&vfe->power_lock);
- vfe->power_count = 0;
-
- mutex_init(&vfe->stream_lock);
- vfe->stream_count = 0;
-
- spin_lock_init(&vfe->output_lock);
-
- vfe->id = 0;
- vfe->reg_update = 0;
-
- for (i = VFE_LINE_RDI0; i <= VFE_LINE_PIX; i++) {
- vfe->line[i].video_out.type =
- V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
- vfe->line[i].video_out.camss = camss;
- vfe->line[i].id = i;
- init_completion(&vfe->line[i].output.sof);
- init_completion(&vfe->line[i].output.reg_update);
- }
-
- init_completion(&vfe->reset_complete);
- init_completion(&vfe->halt_complete);
-
- return 0;
-}
-
-/*
- * msm_vfe_get_vfe_id - Get VFE HW module id
- * @entity: Pointer to VFE media entity structure
- * @id: Return CSID HW module id here
- */
-void msm_vfe_get_vfe_id(struct media_entity *entity, u8 *id)
-{
- struct v4l2_subdev *sd;
- struct vfe_line *line;
- struct vfe_device *vfe;
-
- sd = media_entity_to_v4l2_subdev(entity);
- line = v4l2_get_subdevdata(sd);
- vfe = to_vfe(line);
-
- *id = vfe->id;
-}
-
-/*
- * msm_vfe_get_vfe_line_id - Get VFE line id by media entity
- * @entity: Pointer to VFE media entity structure
- * @id: Return VFE line id here
- */
-void msm_vfe_get_vfe_line_id(struct media_entity *entity, enum vfe_line_id *id)
-{
- struct v4l2_subdev *sd;
- struct vfe_line *line;
-
- sd = media_entity_to_v4l2_subdev(entity);
- line = v4l2_get_subdevdata(sd);
-
- *id = line->id;
-}
-
-/*
- * vfe_link_setup - Setup VFE connections
- * @entity: Pointer to media entity structure
- * @local: Pointer to local pad
- * @remote: Pointer to remote pad
- * @flags: Link flags
- *
- * Return 0 on success
- */
-static int vfe_link_setup(struct media_entity *entity,
- const struct media_pad *local,
- const struct media_pad *remote, u32 flags)
-{
- if (flags & MEDIA_LNK_FL_ENABLED)
- if (media_entity_remote_pad(local))
- return -EBUSY;
-
- return 0;
-}
-
-static const struct v4l2_subdev_core_ops vfe_core_ops = {
- .s_power = vfe_set_power,
-};
-
-static const struct v4l2_subdev_video_ops vfe_video_ops = {
- .s_stream = vfe_set_stream,
-};
-
-static const struct v4l2_subdev_pad_ops vfe_pad_ops = {
- .enum_mbus_code = vfe_enum_mbus_code,
- .enum_frame_size = vfe_enum_frame_size,
- .get_fmt = vfe_get_format,
- .set_fmt = vfe_set_format,
- .get_selection = vfe_get_selection,
- .set_selection = vfe_set_selection,
-};
-
-static const struct v4l2_subdev_ops vfe_v4l2_ops = {
- .core = &vfe_core_ops,
- .video = &vfe_video_ops,
- .pad = &vfe_pad_ops,
-};
-
-static const struct v4l2_subdev_internal_ops vfe_v4l2_internal_ops = {
- .open = vfe_init_formats,
-};
-
-static const struct media_entity_operations vfe_media_ops = {
- .link_setup = vfe_link_setup,
- .link_validate = v4l2_subdev_link_validate,
-};
-
-static const struct camss_video_ops camss_vfe_video_ops = {
- .queue_buffer = vfe_queue_buffer,
- .flush_buffers = vfe_flush_buffers,
-};
-
-void msm_vfe_stop_streaming(struct vfe_device *vfe)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(vfe->line); i++)
- msm_video_stop_streaming(&vfe->line[i].video_out);
-}
-
-/*
- * msm_vfe_register_entities - Register subdev node for VFE module
- * @vfe: VFE device
- * @v4l2_dev: V4L2 device
- *
- * Initialize and register a subdev node for the VFE module. Then
- * call msm_video_register() to register the video device node which
- * will be connected to this subdev node. Then actually create the
- * media link between them.
- *
- * Return 0 on success or a negative error code otherwise
- */
-int msm_vfe_register_entities(struct vfe_device *vfe,
- struct v4l2_device *v4l2_dev)
-{
- struct device *dev = to_device(vfe);
- struct v4l2_subdev *sd;
- struct media_pad *pads;
- struct camss_video *video_out;
- int ret;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(vfe->line); i++) {
- char name[32];
-
- sd = &vfe->line[i].subdev;
- pads = vfe->line[i].pads;
- video_out = &vfe->line[i].video_out;
-
- v4l2_subdev_init(sd, &vfe_v4l2_ops);
- sd->internal_ops = &vfe_v4l2_internal_ops;
- sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
- if (i == VFE_LINE_PIX)
- snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d_%s",
- MSM_VFE_NAME, vfe->id, "pix");
- else
- snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d_%s%d",
- MSM_VFE_NAME, vfe->id, "rdi", i);
-
- v4l2_set_subdevdata(sd, &vfe->line[i]);
-
- ret = vfe_init_formats(sd, NULL);
- if (ret < 0) {
- dev_err(dev, "Failed to init format: %d\n", ret);
- goto error_init;
- }
-
- pads[MSM_VFE_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
- pads[MSM_VFE_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
-
- sd->entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
- sd->entity.ops = &vfe_media_ops;
- ret = media_entity_pads_init(&sd->entity, MSM_VFE_PADS_NUM,
- pads);
- if (ret < 0) {
- dev_err(dev, "Failed to init media entity: %d\n", ret);
- goto error_init;
- }
-
- ret = v4l2_device_register_subdev(v4l2_dev, sd);
- if (ret < 0) {
- dev_err(dev, "Failed to register subdev: %d\n", ret);
- goto error_reg_subdev;
- }
-
- video_out->ops = &camss_vfe_video_ops;
- video_out->bpl_alignment = 8;
- video_out->line_based = 0;
- if (i == VFE_LINE_PIX) {
- video_out->bpl_alignment = 16;
- video_out->line_based = 1;
- }
- snprintf(name, ARRAY_SIZE(name), "%s%d_%s%d",
- MSM_VFE_NAME, vfe->id, "video", i);
- ret = msm_video_register(video_out, v4l2_dev, name,
- i == VFE_LINE_PIX ? 1 : 0);
- if (ret < 0) {
- dev_err(dev, "Failed to register video node: %d\n",
- ret);
- goto error_reg_video;
- }
-
- ret = media_create_pad_link(
- &sd->entity, MSM_VFE_PAD_SRC,
- &video_out->vdev.entity, 0,
- MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED);
- if (ret < 0) {
- dev_err(dev, "Failed to link %s->%s entities: %d\n",
- sd->entity.name, video_out->vdev.entity.name,
- ret);
- goto error_link;
- }
- }
-
- return 0;
-
-error_link:
- msm_video_unregister(video_out);
-
-error_reg_video:
- v4l2_device_unregister_subdev(sd);
-
-error_reg_subdev:
- media_entity_cleanup(&sd->entity);
-
-error_init:
- for (i--; i >= 0; i--) {
- sd = &vfe->line[i].subdev;
- video_out = &vfe->line[i].video_out;
-
- msm_video_unregister(video_out);
- v4l2_device_unregister_subdev(sd);
- media_entity_cleanup(&sd->entity);
- }
-
- return ret;
-}
-
-/*
- * msm_vfe_unregister_entities - Unregister VFE module subdev node
- * @vfe: VFE device
- */
-void msm_vfe_unregister_entities(struct vfe_device *vfe)
-{
- int i;
-
- mutex_destroy(&vfe->power_lock);
- mutex_destroy(&vfe->stream_lock);
-
- for (i = 0; i < ARRAY_SIZE(vfe->line); i++) {
- struct v4l2_subdev *sd = &vfe->line[i].subdev;
- struct camss_video *video_out = &vfe->line[i].video_out;
-
- msm_video_unregister(video_out);
- v4l2_device_unregister_subdev(sd);
- media_entity_cleanup(&sd->entity);
- }
-}
deleted file mode 100644
@@ -1,123 +0,0 @@
-/*
- * camss-vfe.h
- *
- * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module
- *
- * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
- * Copyright (C) 2015-2017 Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef QC_MSM_CAMSS_VFE_H
-#define QC_MSM_CAMSS_VFE_H
-
-#include <linux/clk.h>
-#include <linux/spinlock_types.h>
-#include <media/media-entity.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-
-#include "camss-video.h"
-
-#define MSM_VFE_PAD_SINK 0
-#define MSM_VFE_PAD_SRC 1
-#define MSM_VFE_PADS_NUM 2
-
-#define MSM_VFE_LINE_NUM 4
-#define MSM_VFE_IMAGE_MASTERS_NUM 7
-#define MSM_VFE_COMPOSITE_IRQ_NUM 4
-
-#define MSM_VFE_VFE0_UB_SIZE 1023
-#define MSM_VFE_VFE0_UB_SIZE_RDI (MSM_VFE_VFE0_UB_SIZE / 3)
-#define MSM_VFE_VFE1_UB_SIZE 1535
-#define MSM_VFE_VFE1_UB_SIZE_RDI (MSM_VFE_VFE1_UB_SIZE / 3)
-
-enum vfe_output_state {
- VFE_OUTPUT_OFF,
- VFE_OUTPUT_RESERVED,
- VFE_OUTPUT_SINGLE,
- VFE_OUTPUT_CONTINUOUS,
- VFE_OUTPUT_IDLE,
- VFE_OUTPUT_STOPPING
-};
-
-enum vfe_line_id {
- VFE_LINE_NONE = -1,
- VFE_LINE_RDI0 = 0,
- VFE_LINE_RDI1 = 1,
- VFE_LINE_RDI2 = 2,
- VFE_LINE_PIX = 3
-};
-
-struct vfe_output {
- u8 wm_num;
- u8 wm_idx[3];
-
- int active_buf;
- struct camss_buffer *buf[2];
- struct camss_buffer *last_buffer;
- struct list_head pending_bufs;
-
- unsigned int drop_update_idx;
-
- enum vfe_output_state state;
- unsigned int sequence;
- int wait_sof;
- int wait_reg_update;
- struct completion sof;
- struct completion reg_update;
-};
-
-struct vfe_line {
- enum vfe_line_id id;
- struct v4l2_subdev subdev;
- struct media_pad pads[MSM_VFE_PADS_NUM];
- struct v4l2_mbus_framefmt fmt[MSM_VFE_PADS_NUM];
- struct v4l2_rect compose;
- struct v4l2_rect crop;
- struct camss_video video_out;
- struct vfe_output output;
-};
-
-struct vfe_device {
- u8 id;
- void __iomem *base;
- u32 irq;
- char irq_name[30];
- struct camss_clock *clock;
- int nclocks;
- struct completion reset_complete;
- struct completion halt_complete;
- struct mutex power_lock;
- int power_count;
- struct mutex stream_lock;
- int stream_count;
- spinlock_t output_lock;
- enum vfe_line_id wm_output_map[MSM_VFE_IMAGE_MASTERS_NUM];
- struct vfe_line line[MSM_VFE_LINE_NUM];
- u32 reg_update;
- u8 was_streaming;
-};
-
-struct resources;
-
-int msm_vfe_subdev_init(struct vfe_device *vfe, const struct resources *res);
-
-int msm_vfe_register_entities(struct vfe_device *vfe,
- struct v4l2_device *v4l2_dev);
-
-void msm_vfe_unregister_entities(struct vfe_device *vfe);
-
-void msm_vfe_get_vfe_id(struct media_entity *entity, u8 *id);
-void msm_vfe_get_vfe_line_id(struct media_entity *entity, enum vfe_line_id *id);
-
-void msm_vfe_stop_streaming(struct vfe_device *vfe);
-
-#endif /* QC_MSM_CAMSS_VFE_H */
deleted file mode 100644
@@ -1,859 +0,0 @@
-/*
- * camss-video.c
- *
- * Qualcomm MSM Camera Subsystem - V4L2 device node
- *
- * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
- * Copyright (C) 2015-2017 Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/slab.h>
-#include <media/media-entity.h>
-#include <media/v4l2-dev.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-mc.h>
-#include <media/videobuf2-dma-sg.h>
-
-#include "camss-video.h"
-#include "camss.h"
-
-struct fract {
- u8 numerator;
- u8 denominator;
-};
-
-/*
- * struct camss_format_info - ISP media bus format information
- * @code: V4L2 media bus format code
- * @pixelformat: V4L2 pixel format FCC identifier
- * @planes: Number of planes
- * @hsub: Horizontal subsampling (for each plane)
- * @vsub: Vertical subsampling (for each plane)
- * @bpp: Bits per pixel when stored in memory (for each plane)
- */
-struct camss_format_info {
- u32 code;
- u32 pixelformat;
- u8 planes;
- struct fract hsub[3];
- struct fract vsub[3];
- unsigned int bpp[3];
-};
-
-static const struct camss_format_info formats_rdi[] = {
- { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_UYVY, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 16 } },
- { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_VYUY, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 16 } },
- { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_YUYV, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 16 } },
- { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_YVYU, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 16 } },
- { MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_PIX_FMT_SBGGR8, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 8 } },
- { MEDIA_BUS_FMT_SGBRG8_1X8, V4L2_PIX_FMT_SGBRG8, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 8 } },
- { MEDIA_BUS_FMT_SGRBG8_1X8, V4L2_PIX_FMT_SGRBG8, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 8 } },
- { MEDIA_BUS_FMT_SRGGB8_1X8, V4L2_PIX_FMT_SRGGB8, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 8 } },
- { MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_SBGGR10P, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 10 } },
- { MEDIA_BUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_SGBRG10P, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 10 } },
- { MEDIA_BUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10P, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 10 } },
- { MEDIA_BUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_SRGGB10P, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 10 } },
- { MEDIA_BUS_FMT_SBGGR12_1X12, V4L2_PIX_FMT_SBGGR12P, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 12 } },
- { MEDIA_BUS_FMT_SGBRG12_1X12, V4L2_PIX_FMT_SGBRG12P, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 12 } },
- { MEDIA_BUS_FMT_SGRBG12_1X12, V4L2_PIX_FMT_SGRBG12P, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 12 } },
- { MEDIA_BUS_FMT_SRGGB12_1X12, V4L2_PIX_FMT_SRGGB12P, 1,
- { { 1, 1 } }, { { 1, 1 } }, { 12 } },
-};
-
-static const struct camss_format_info formats_pix[] = {
- { MEDIA_BUS_FMT_YUYV8_1_5X8, V4L2_PIX_FMT_NV12, 1,
- { { 1, 1 } }, { { 2, 3 } }, { 8 } },
- { MEDIA_BUS_FMT_YVYU8_1_5X8, V4L2_PIX_FMT_NV12, 1,
- { { 1, 1 } }, { { 2, 3 } }, { 8 } },
- { MEDIA_BUS_FMT_UYVY8_1_5X8, V4L2_PIX_FMT_NV12, 1,
- { { 1, 1 } }, { { 2, 3 } }, { 8 } },
- { MEDIA_BUS_FMT_VYUY8_1_5X8, V4L2_PIX_FMT_NV12, 1,
- { { 1, 1 } }, { { 2, 3 } }, { 8 } },
- { MEDIA_BUS_FMT_YUYV8_1_5X8, V4L2_PIX_FMT_NV21, 1,
- { { 1, 1 } }, { { 2, 3 } }, { 8 } },
- { MEDIA_BUS_FMT_YVYU8_1_5X8, V4L2_PIX_FMT_NV21, 1,
- { { 1, 1 } }, { { 2, 3 } }, { 8 } },
- { MEDIA_BUS_FMT_UYVY8_1_5X8, V4L2_PIX_FMT_NV21, 1,
- { { 1, 1 } }, { { 2, 3 } }, { 8 } },
- { MEDIA_BUS_FMT_VYUY8_1_5X8, V4L2_PIX_FMT_NV21, 1,
- { { 1, 1 } }, { { 2, 3 } }, { 8 } },
- { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_NV16, 1,
- { { 1, 1 } }, { { 1, 2 } }, { 8 } },
- { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_NV16, 1,
- { { 1, 1 } }, { { 1, 2 } }, { 8 } },
- { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_NV16, 1,
- { { 1, 1 } }, { { 1, 2 } }, { 8 } },
- { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_NV16, 1,
- { { 1, 1 } }, { { 1, 2 } }, { 8 } },
- { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_NV61, 1,
- { { 1, 1 } }, { { 1, 2 } }, { 8 } },
- { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_NV61, 1,
- { { 1, 1 } }, { { 1, 2 } }, { 8 } },
- { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_NV61, 1,
- { { 1, 1 } }, { { 1, 2 } }, { 8 } },
- { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_NV61, 1,
- { { 1, 1 } }, { { 1, 2 } }, { 8 } },
-};
-
-/* -----------------------------------------------------------------------------
- * Helper functions
- */
-
-static int video_find_format(u32 code, u32 pixelformat,
- const struct camss_format_info *formats,
- unsigned int nformats)
-{
- int i;
-
- for (i = 0; i < nformats; i++) {
- if (formats[i].code == code &&
- formats[i].pixelformat == pixelformat)
- return i;
- }
-
- for (i = 0; i < nformats; i++)
- if (formats[i].code == code)
- return i;
-
- WARN_ON(1);
-
- return -EINVAL;
-}
-
-/*
- * video_mbus_to_pix_mp - Convert v4l2_mbus_framefmt to v4l2_pix_format_mplane
- * @mbus: v4l2_mbus_framefmt format (input)
- * @pix: v4l2_pix_format_mplane format (output)
- * @f: a pointer to formats array element to be used for the conversion
- * @alignment: bytesperline alignment value
- *
- * Fill the output pix structure with information from the input mbus format.
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int video_mbus_to_pix_mp(const struct v4l2_mbus_framefmt *mbus,
- struct v4l2_pix_format_mplane *pix,
- const struct camss_format_info *f,
- unsigned int alignment)
-{
- unsigned int i;
- u32 bytesperline;
-
- memset(pix, 0, sizeof(*pix));
- v4l2_fill_pix_format_mplane(pix, mbus);
- pix->pixelformat = f->pixelformat;
- pix->num_planes = f->planes;
- for (i = 0; i < pix->num_planes; i++) {
- bytesperline = pix->width / f->hsub[i].numerator *
- f->hsub[i].denominator * f->bpp[i] / 8;
- bytesperline = ALIGN(bytesperline, alignment);
- pix->plane_fmt[i].bytesperline = bytesperline;
- pix->plane_fmt[i].sizeimage = pix->height /
- f->vsub[i].numerator * f->vsub[i].denominator *
- bytesperline;
- }
-
- return 0;
-}
-
-static struct v4l2_subdev *video_remote_subdev(struct camss_video *video,
- u32 *pad)
-{
- struct media_pad *remote;
-
- remote = media_entity_remote_pad(&video->pad);
-
- if (!remote || !is_media_entity_v4l2_subdev(remote->entity))
- return NULL;
-
- if (pad)
- *pad = remote->index;
-
- return media_entity_to_v4l2_subdev(remote->entity);
-}
-
-static int video_get_subdev_format(struct camss_video *video,
- struct v4l2_format *format)
-{
- struct v4l2_subdev_format fmt;
- struct v4l2_subdev *subdev;
- u32 pad;
- int ret;
-
- subdev = video_remote_subdev(video, &pad);
- if (subdev == NULL)
- return -EPIPE;
-
- fmt.pad = pad;
- fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
-
- ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt);
- if (ret)
- return ret;
-
- ret = video_find_format(fmt.format.code,
- format->fmt.pix_mp.pixelformat,
- video->formats, video->nformats);
- if (ret < 0)
- return ret;
-
- format->type = video->type;
-
- return video_mbus_to_pix_mp(&fmt.format, &format->fmt.pix_mp,
- &video->formats[ret], video->bpl_alignment);
-}
-
-/* -----------------------------------------------------------------------------
- * Video queue operations
- */
-
-static int video_queue_setup(struct vb2_queue *q,
- unsigned int *num_buffers, unsigned int *num_planes,
- unsigned int sizes[], struct device *alloc_devs[])
-{
- struct camss_video *video = vb2_get_drv_priv(q);
- const struct v4l2_pix_format_mplane *format =
- &video->active_fmt.fmt.pix_mp;
- unsigned int i;
-
- if (*num_planes) {
- if (*num_planes != format->num_planes)
- return -EINVAL;
-
- for (i = 0; i < *num_planes; i++)
- if (sizes[i] < format->plane_fmt[i].sizeimage)
- return -EINVAL;
-
- return 0;
- }
-
- *num_planes = format->num_planes;
-
- for (i = 0; i < *num_planes; i++)
- sizes[i] = format->plane_fmt[i].sizeimage;
-
- return 0;
-}
-
-static int video_buf_init(struct vb2_buffer *vb)
-{
- struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
- struct camss_video *video = vb2_get_drv_priv(vb->vb2_queue);
- struct camss_buffer *buffer = container_of(vbuf, struct camss_buffer,
- vb);
- const struct v4l2_pix_format_mplane *format =
- &video->active_fmt.fmt.pix_mp;
- struct sg_table *sgt;
- unsigned int i;
-
- for (i = 0; i < format->num_planes; i++) {
- sgt = vb2_dma_sg_plane_desc(vb, i);
- if (!sgt)
- return -EFAULT;
-
- buffer->addr[i] = sg_dma_address(sgt->sgl);
- }
-
- if (format->pixelformat == V4L2_PIX_FMT_NV12 ||
- format->pixelformat == V4L2_PIX_FMT_NV21 ||
- format->pixelformat == V4L2_PIX_FMT_NV16 ||
- format->pixelformat == V4L2_PIX_FMT_NV61)
- buffer->addr[1] = buffer->addr[0] +
- format->plane_fmt[0].bytesperline *
- format->height;
-
- return 0;
-}
-
-static int video_buf_prepare(struct vb2_buffer *vb)
-{
- struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
- struct camss_video *video = vb2_get_drv_priv(vb->vb2_queue);
- const struct v4l2_pix_format_mplane *format =
- &video->active_fmt.fmt.pix_mp;
- unsigned int i;
-
- for (i = 0; i < format->num_planes; i++) {
- if (format->plane_fmt[i].sizeimage > vb2_plane_size(vb, i))
- return -EINVAL;
-
- vb2_set_plane_payload(vb, i, format->plane_fmt[i].sizeimage);
- }
-
- vbuf->field = V4L2_FIELD_NONE;
-
- return 0;
-}
-
-static void video_buf_queue(struct vb2_buffer *vb)
-{
- struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
- struct camss_video *video = vb2_get_drv_priv(vb->vb2_queue);
- struct camss_buffer *buffer = container_of(vbuf, struct camss_buffer,
- vb);
-
- video->ops->queue_buffer(video, buffer);
-}
-
-static int video_check_format(struct camss_video *video)
-{
- struct v4l2_pix_format_mplane *pix = &video->active_fmt.fmt.pix_mp;
- struct v4l2_format format;
- struct v4l2_pix_format_mplane *sd_pix = &format.fmt.pix_mp;
- int ret;
-
- sd_pix->pixelformat = pix->pixelformat;
- ret = video_get_subdev_format(video, &format);
- if (ret < 0)
- return ret;
-
- if (pix->pixelformat != sd_pix->pixelformat ||
- pix->height != sd_pix->height ||
- pix->width != sd_pix->width ||
- pix->num_planes != sd_pix->num_planes ||
- pix->field != format.fmt.pix_mp.field)
- return -EPIPE;
-
- return 0;
-}
-
-static int video_start_streaming(struct vb2_queue *q, unsigned int count)
-{
- struct camss_video *video = vb2_get_drv_priv(q);
- struct video_device *vdev = &video->vdev;
- struct media_entity *entity;
- struct media_pad *pad;
- struct v4l2_subdev *subdev;
- int ret;
-
- ret = media_pipeline_start(&vdev->entity, &video->pipe);
- if (ret < 0)
- return ret;
-
- ret = video_check_format(video);
- if (ret < 0)
- goto error;
-
- entity = &vdev->entity;
- while (1) {
- pad = &entity->pads[0];
- if (!(pad->flags & MEDIA_PAD_FL_SINK))
- break;
-
- pad = media_entity_remote_pad(pad);
- if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
- break;
-
- entity = pad->entity;
- subdev = media_entity_to_v4l2_subdev(entity);
-
- ret = v4l2_subdev_call(subdev, video, s_stream, 1);
- if (ret < 0 && ret != -ENOIOCTLCMD)
- goto error;
- }
-
- return 0;
-
-error:
- media_pipeline_stop(&vdev->entity);
-
- video->ops->flush_buffers(video, VB2_BUF_STATE_QUEUED);
-
- return ret;
-}
-
-static void video_stop_streaming(struct vb2_queue *q)
-{
- struct camss_video *video = vb2_get_drv_priv(q);
- struct video_device *vdev = &video->vdev;
- struct media_entity *entity;
- struct media_pad *pad;
- struct v4l2_subdev *subdev;
-
- entity = &vdev->entity;
- while (1) {
- pad = &entity->pads[0];
- if (!(pad->flags & MEDIA_PAD_FL_SINK))
- break;
-
- pad = media_entity_remote_pad(pad);
- if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
- break;
-
- entity = pad->entity;
- subdev = media_entity_to_v4l2_subdev(entity);
-
- v4l2_subdev_call(subdev, video, s_stream, 0);
- }
-
- media_pipeline_stop(&vdev->entity);
-
- video->ops->flush_buffers(video, VB2_BUF_STATE_ERROR);
-}
-
-static const struct vb2_ops msm_video_vb2_q_ops = {
- .queue_setup = video_queue_setup,
- .wait_prepare = vb2_ops_wait_prepare,
- .wait_finish = vb2_ops_wait_finish,
- .buf_init = video_buf_init,
- .buf_prepare = video_buf_prepare,
- .buf_queue = video_buf_queue,
- .start_streaming = video_start_streaming,
- .stop_streaming = video_stop_streaming,
-};
-
-/* -----------------------------------------------------------------------------
- * V4L2 ioctls
- */
-
-static int video_querycap(struct file *file, void *fh,
- struct v4l2_capability *cap)
-{
- struct camss_video *video = video_drvdata(file);
-
- strlcpy(cap->driver, "qcom-camss", sizeof(cap->driver));
- strlcpy(cap->card, "Qualcomm Camera Subsystem", sizeof(cap->card));
- snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
- dev_name(video->camss->dev));
-
- return 0;
-}
-
-static int video_enum_fmt(struct file *file, void *fh, struct v4l2_fmtdesc *f)
-{
- struct camss_video *video = video_drvdata(file);
- int i, j, k;
-
- if (f->type != video->type)
- return -EINVAL;
-
- if (f->index >= video->nformats)
- return -EINVAL;
-
- /* find index "i" of "k"th unique pixelformat in formats array */
- k = -1;
- for (i = 0; i < video->nformats; i++) {
- for (j = 0; j < i; j++) {
- if (video->formats[i].pixelformat ==
- video->formats[j].pixelformat)
- break;
- }
-
- if (j == i)
- k++;
-
- if (k == f->index)
- break;
- }
-
- if (k < f->index)
- return -EINVAL;
-
- f->pixelformat = video->formats[i].pixelformat;
-
- return 0;
-}
-
-static int video_g_fmt(struct file *file, void *fh, struct v4l2_format *f)
-{
- struct camss_video *video = video_drvdata(file);
-
- *f = video->active_fmt;
-
- return 0;
-}
-
-static int __video_try_fmt(struct camss_video *video, struct v4l2_format *f)
-{
- struct v4l2_pix_format_mplane *pix_mp;
- const struct camss_format_info *fi;
- struct v4l2_plane_pix_format *p;
- u32 bytesperline[3] = { 0 };
- u32 sizeimage[3] = { 0 };
- u32 width, height;
- u32 bpl, lines;
- int i, j;
-
- pix_mp = &f->fmt.pix_mp;
-
- if (video->line_based)
- for (i = 0; i < pix_mp->num_planes && i < 3; i++) {
- p = &pix_mp->plane_fmt[i];
- bytesperline[i] = clamp_t(u32, p->bytesperline,
- 1, 65528);
- sizeimage[i] = clamp_t(u32, p->sizeimage,
- bytesperline[i],
- bytesperline[i] * 4096);
- }
-
- for (j = 0; j < video->nformats; j++)
- if (pix_mp->pixelformat == video->formats[j].pixelformat)
- break;
-
- if (j == video->nformats)
- j = 0; /* default format */
-
- fi = &video->formats[j];
- width = pix_mp->width;
- height = pix_mp->height;
-
- memset(pix_mp, 0, sizeof(*pix_mp));
-
- pix_mp->pixelformat = fi->pixelformat;
- pix_mp->width = clamp_t(u32, width, 1, 8191);
- pix_mp->height = clamp_t(u32, height, 1, 8191);
- pix_mp->num_planes = fi->planes;
- for (i = 0; i < pix_mp->num_planes; i++) {
- bpl = pix_mp->width / fi->hsub[i].numerator *
- fi->hsub[i].denominator * fi->bpp[i] / 8;
- bpl = ALIGN(bpl, video->bpl_alignment);
- pix_mp->plane_fmt[i].bytesperline = bpl;
- pix_mp->plane_fmt[i].sizeimage = pix_mp->height /
- fi->vsub[i].numerator * fi->vsub[i].denominator * bpl;
- }
-
- pix_mp->field = V4L2_FIELD_NONE;
- pix_mp->colorspace = V4L2_COLORSPACE_SRGB;
- pix_mp->flags = 0;
- pix_mp->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pix_mp->colorspace);
- pix_mp->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
- pix_mp->colorspace, pix_mp->ycbcr_enc);
- pix_mp->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix_mp->colorspace);
-
- if (video->line_based)
- for (i = 0; i < pix_mp->num_planes; i++) {
- p = &pix_mp->plane_fmt[i];
- p->bytesperline = clamp_t(u32, p->bytesperline,
- 1, 65528);
- p->sizeimage = clamp_t(u32, p->sizeimage,
- p->bytesperline,
- p->bytesperline * 4096);
- lines = p->sizeimage / p->bytesperline;
-
- if (p->bytesperline < bytesperline[i])
- p->bytesperline = ALIGN(bytesperline[i], 8);
-
- if (p->sizeimage < p->bytesperline * lines)
- p->sizeimage = p->bytesperline * lines;
-
- if (p->sizeimage < sizeimage[i])
- p->sizeimage = sizeimage[i];
- }
-
- return 0;
-}
-
-static int video_try_fmt(struct file *file, void *fh, struct v4l2_format *f)
-{
- struct camss_video *video = video_drvdata(file);
-
- return __video_try_fmt(video, f);
-}
-
-static int video_s_fmt(struct file *file, void *fh, struct v4l2_format *f)
-{
- struct camss_video *video = video_drvdata(file);
- int ret;
-
- if (vb2_is_busy(&video->vb2_q))
- return -EBUSY;
-
- ret = __video_try_fmt(video, f);
- if (ret < 0)
- return ret;
-
- video->active_fmt = *f;
-
- return 0;
-}
-
-static int video_enum_input(struct file *file, void *fh,
- struct v4l2_input *input)
-{
- if (input->index > 0)
- return -EINVAL;
-
- strlcpy(input->name, "camera", sizeof(input->name));
- input->type = V4L2_INPUT_TYPE_CAMERA;
-
- return 0;
-}
-
-static int video_g_input(struct file *file, void *fh, unsigned int *input)
-{
- *input = 0;
-
- return 0;
-}
-
-static int video_s_input(struct file *file, void *fh, unsigned int input)
-{
- return input == 0 ? 0 : -EINVAL;
-}
-
-static const struct v4l2_ioctl_ops msm_vid_ioctl_ops = {
- .vidioc_querycap = video_querycap,
- .vidioc_enum_fmt_vid_cap_mplane = video_enum_fmt,
- .vidioc_g_fmt_vid_cap_mplane = video_g_fmt,
- .vidioc_s_fmt_vid_cap_mplane = video_s_fmt,
- .vidioc_try_fmt_vid_cap_mplane = video_try_fmt,
- .vidioc_reqbufs = vb2_ioctl_reqbufs,
- .vidioc_querybuf = vb2_ioctl_querybuf,
- .vidioc_qbuf = vb2_ioctl_qbuf,
- .vidioc_expbuf = vb2_ioctl_expbuf,
- .vidioc_dqbuf = vb2_ioctl_dqbuf,
- .vidioc_create_bufs = vb2_ioctl_create_bufs,
- .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
- .vidioc_streamon = vb2_ioctl_streamon,
- .vidioc_streamoff = vb2_ioctl_streamoff,
- .vidioc_enum_input = video_enum_input,
- .vidioc_g_input = video_g_input,
- .vidioc_s_input = video_s_input,
-};
-
-/* -----------------------------------------------------------------------------
- * V4L2 file operations
- */
-
-static int video_open(struct file *file)
-{
- struct video_device *vdev = video_devdata(file);
- struct camss_video *video = video_drvdata(file);
- struct v4l2_fh *vfh;
- int ret;
-
- mutex_lock(&video->lock);
-
- vfh = kzalloc(sizeof(*vfh), GFP_KERNEL);
- if (vfh == NULL) {
- ret = -ENOMEM;
- goto error_alloc;
- }
-
- v4l2_fh_init(vfh, vdev);
- v4l2_fh_add(vfh);
-
- file->private_data = vfh;
-
- ret = v4l2_pipeline_pm_use(&vdev->entity, 1);
- if (ret < 0) {
- dev_err(video->camss->dev, "Failed to power up pipeline: %d\n",
- ret);
- goto error_pm_use;
- }
-
- mutex_unlock(&video->lock);
-
- return 0;
-
-error_pm_use:
- v4l2_fh_release(file);
-
-error_alloc:
- mutex_unlock(&video->lock);
-
- return ret;
-}
-
-static int video_release(struct file *file)
-{
- struct video_device *vdev = video_devdata(file);
-
- vb2_fop_release(file);
-
- v4l2_pipeline_pm_use(&vdev->entity, 0);
-
- file->private_data = NULL;
-
- return 0;
-}
-
-static const struct v4l2_file_operations msm_vid_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = video_ioctl2,
- .open = video_open,
- .release = video_release,
- .poll = vb2_fop_poll,
- .mmap = vb2_fop_mmap,
- .read = vb2_fop_read,
-};
-
-/* -----------------------------------------------------------------------------
- * CAMSS video core
- */
-
-static void msm_video_release(struct video_device *vdev)
-{
- struct camss_video *video = video_get_drvdata(vdev);
-
- media_entity_cleanup(&vdev->entity);
-
- mutex_destroy(&video->q_lock);
- mutex_destroy(&video->lock);
-
- if (atomic_dec_and_test(&video->camss->ref_count))
- camss_delete(video->camss);
-}
-
-/*
- * msm_video_init_format - Helper function to initialize format
- * @video: struct camss_video
- *
- * Initialize pad format with default value.
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int msm_video_init_format(struct camss_video *video)
-{
- int ret;
- struct v4l2_format format = {
- .type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE,
- .fmt.pix_mp = {
- .width = 1920,
- .height = 1080,
- .pixelformat = video->formats[0].pixelformat,
- },
- };
-
- ret = __video_try_fmt(video, &format);
- if (ret < 0)
- return ret;
-
- video->active_fmt = format;
-
- return 0;
-}
-
-/*
- * msm_video_register - Register a video device node
- * @video: struct camss_video
- * @v4l2_dev: V4L2 device
- * @name: name to be used for the video device node
- *
- * Initialize and register a video device node to a V4L2 device. Also
- * initialize the vb2 queue.
- *
- * Return 0 on success or a negative error code otherwise
- */
-
-int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,
- const char *name, int is_pix)
-{
- struct media_pad *pad = &video->pad;
- struct video_device *vdev;
- struct vb2_queue *q;
- int ret;
-
- vdev = &video->vdev;
-
- mutex_init(&video->q_lock);
-
- q = &video->vb2_q;
- q->drv_priv = video;
- q->mem_ops = &vb2_dma_sg_memops;
- q->ops = &msm_video_vb2_q_ops;
- q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
- q->io_modes = VB2_DMABUF | VB2_MMAP | VB2_READ;
- q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
- q->buf_struct_size = sizeof(struct camss_buffer);
- q->dev = video->camss->dev;
- q->lock = &video->q_lock;
- ret = vb2_queue_init(q);
- if (ret < 0) {
- dev_err(v4l2_dev->dev, "Failed to init vb2 queue: %d\n", ret);
- goto error_vb2_init;
- }
-
- pad->flags = MEDIA_PAD_FL_SINK;
- ret = media_entity_pads_init(&vdev->entity, 1, pad);
- if (ret < 0) {
- dev_err(v4l2_dev->dev, "Failed to init video entity: %d\n",
- ret);
- goto error_media_init;
- }
-
- mutex_init(&video->lock);
-
- video->formats = formats_rdi;
- video->nformats = ARRAY_SIZE(formats_rdi);
- if (is_pix) {
- video->formats = formats_pix;
- video->nformats = ARRAY_SIZE(formats_pix);
- }
-
- ret = msm_video_init_format(video);
- if (ret < 0) {
- dev_err(v4l2_dev->dev, "Failed to init format: %d\n", ret);
- goto error_video_register;
- }
-
- vdev->fops = &msm_vid_fops;
- vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_STREAMING |
- V4L2_CAP_READWRITE;
- vdev->ioctl_ops = &msm_vid_ioctl_ops;
- vdev->release = msm_video_release;
- vdev->v4l2_dev = v4l2_dev;
- vdev->vfl_dir = VFL_DIR_RX;
- vdev->queue = &video->vb2_q;
- vdev->lock = &video->lock;
- strlcpy(vdev->name, name, sizeof(vdev->name));
-
- ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
- if (ret < 0) {
- dev_err(v4l2_dev->dev, "Failed to register video device: %d\n",
- ret);
- goto error_video_register;
- }
-
- video_set_drvdata(vdev, video);
- atomic_inc(&video->camss->ref_count);
-
- return 0;
-
-error_video_register:
- media_entity_cleanup(&vdev->entity);
- mutex_destroy(&video->lock);
-error_media_init:
- vb2_queue_release(&video->vb2_q);
-error_vb2_init:
- mutex_destroy(&video->q_lock);
-
- return ret;
-}
-
-void msm_video_stop_streaming(struct camss_video *video)
-{
- if (vb2_is_streaming(&video->vb2_q))
- vb2_queue_release(&video->vb2_q);
-}
-
-void msm_video_unregister(struct camss_video *video)
-{
- atomic_inc(&video->camss->ref_count);
- video_unregister_device(&video->vdev);
- atomic_dec(&video->camss->ref_count);
-}
deleted file mode 100644
@@ -1,70 +0,0 @@
-/*
- * camss-video.h
- *
- * Qualcomm MSM Camera Subsystem - V4L2 device node
- *
- * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
- * Copyright (C) 2015-2017 Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef QC_MSM_CAMSS_VIDEO_H
-#define QC_MSM_CAMSS_VIDEO_H
-
-#include <linux/mutex.h>
-#include <linux/videodev2.h>
-#include <media/media-entity.h>
-#include <media/v4l2-dev.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-fh.h>
-#include <media/v4l2-mediabus.h>
-#include <media/videobuf2-v4l2.h>
-
-struct camss_buffer {
- struct vb2_v4l2_buffer vb;
- dma_addr_t addr[3];
- struct list_head queue;
-};
-
-struct camss_video;
-
-struct camss_video_ops {
- int (*queue_buffer)(struct camss_video *vid, struct camss_buffer *buf);
- int (*flush_buffers)(struct camss_video *vid,
- enum vb2_buffer_state state);
-};
-
-struct camss_format_info;
-
-struct camss_video {
- struct camss *camss;
- struct vb2_queue vb2_q;
- struct video_device vdev;
- struct media_pad pad;
- struct v4l2_format active_fmt;
- enum v4l2_buf_type type;
- struct media_pipeline pipe;
- const struct camss_video_ops *ops;
- struct mutex lock;
- struct mutex q_lock;
- unsigned int bpl_alignment;
- unsigned int line_based;
- const struct camss_format_info *formats;
- unsigned int nformats;
-};
-
-void msm_video_stop_streaming(struct camss_video *video);
-
-int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,
- const char *name, int is_pix);
-
-void msm_video_unregister(struct camss_video *video);
-
-#endif /* QC_MSM_CAMSS_VIDEO_H */
deleted file mode 100644
@@ -1,751 +0,0 @@
-/*
- * camss.c
- *
- * Qualcomm MSM Camera Subsystem - Core
- *
- * Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (C) 2015-2017 Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/clk.h>
-#include <linux/media-bus-format.h>
-#include <linux/media.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/of_graph.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-
-#include <media/media-device.h>
-#include <media/v4l2-async.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-mc.h>
-#include <media/v4l2-fwnode.h>
-
-#include "camss.h"
-
-#define CAMSS_CLOCK_MARGIN_NUMERATOR 105
-#define CAMSS_CLOCK_MARGIN_DENOMINATOR 100
-
-static const struct resources csiphy_res[] = {
- /* CSIPHY0 */
- {
- .regulator = { NULL },
- .clock = { "camss_top_ahb", "ispif_ahb",
- "camss_ahb", "csiphy0_timer" },
- .clock_rate = { { 0 },
- { 0 },
- { 0 },
- { 100000000, 200000000 } },
- .reg = { "csiphy0", "csiphy0_clk_mux" },
- .interrupt = { "csiphy0" }
- },
-
- /* CSIPHY1 */
- {
- .regulator = { NULL },
- .clock = { "camss_top_ahb", "ispif_ahb",
- "camss_ahb", "csiphy1_timer" },
- .clock_rate = { { 0 },
- { 0 },
- { 0 },
- { 100000000, 200000000 } },
- .reg = { "csiphy1", "csiphy1_clk_mux" },
- .interrupt = { "csiphy1" }
- }
-};
-
-static const struct resources csid_res[] = {
- /* CSID0 */
- {
- .regulator = { "vdda" },
- .clock = { "camss_top_ahb", "ispif_ahb",
- "csi0_ahb", "camss_ahb",
- "csi0", "csi0_phy", "csi0_pix", "csi0_rdi" },
- .clock_rate = { { 0 },
- { 0 },
- { 0 },
- { 0 },
- { 100000000, 200000000 },
- { 0 },
- { 0 },
- { 0 } },
- .reg = { "csid0" },
- .interrupt = { "csid0" }
- },
-
- /* CSID1 */
- {
- .regulator = { "vdda" },
- .clock = { "camss_top_ahb", "ispif_ahb",
- "csi1_ahb", "camss_ahb",
- "csi1", "csi1_phy", "csi1_pix", "csi1_rdi" },
- .clock_rate = { { 0 },
- { 0 },
- { 0 },
- { 0 },
- { 100000000, 200000000 },
- { 0 },
- { 0 },
- { 0 } },
- .reg = { "csid1" },
- .interrupt = { "csid1" }
- },
-};
-
-static const struct resources_ispif ispif_res = {
- /* ISPIF */
- .clock = { "camss_top_ahb", "camss_ahb", "ispif_ahb",
- "csi0", "csi0_pix", "csi0_rdi",
- "csi1", "csi1_pix", "csi1_rdi" },
- .clock_for_reset = { "camss_vfe_vfe", "camss_csi_vfe" },
- .reg = { "ispif", "csi_clk_mux" },
- .interrupt = "ispif"
-
-};
-
-static const struct resources vfe_res = {
- /* VFE0 */
- .regulator = { NULL },
- .clock = { "camss_top_ahb", "camss_vfe_vfe", "camss_csi_vfe",
- "iface", "bus", "camss_ahb" },
- .clock_rate = { { 0 },
- { 50000000, 80000000, 100000000, 160000000,
- 177780000, 200000000, 266670000, 320000000,
- 400000000, 465000000 },
- { 0 },
- { 0 },
- { 0 },
- { 0 },
- { 0 },
- { 0 },
- { 0 } },
- .reg = { "vfe0" },
- .interrupt = { "vfe0" }
-};
-
-/*
- * camss_add_clock_margin - Add margin to clock frequency rate
- * @rate: Clock frequency rate
- *
- * When making calculations with physical clock frequency values
- * some safety margin must be added. Add it.
- */
-inline void camss_add_clock_margin(u64 *rate)
-{
- *rate *= CAMSS_CLOCK_MARGIN_NUMERATOR;
- *rate = div_u64(*rate, CAMSS_CLOCK_MARGIN_DENOMINATOR);
-}
-
-/*
- * camss_enable_clocks - Enable multiple clocks
- * @nclocks: Number of clocks in clock array
- * @clock: Clock array
- * @dev: Device
- *
- * Return 0 on success or a negative error code otherwise
- */
-int camss_enable_clocks(int nclocks, struct camss_clock *clock,
- struct device *dev)
-{
- int ret;
- int i;
-
- for (i = 0; i < nclocks; i++) {
- ret = clk_prepare_enable(clock[i].clk);
- if (ret) {
- dev_err(dev, "clock enable failed: %d\n", ret);
- goto error;
- }
- }
-
- return 0;
-
-error:
- for (i--; i >= 0; i--)
- clk_disable_unprepare(clock[i].clk);
-
- return ret;
-}
-
-/*
- * camss_disable_clocks - Disable multiple clocks
- * @nclocks: Number of clocks in clock array
- * @clock: Clock array
- */
-void camss_disable_clocks(int nclocks, struct camss_clock *clock)
-{
- int i;
-
- for (i = nclocks - 1; i >= 0; i--)
- clk_disable_unprepare(clock[i].clk);
-}
-
-/*
- * camss_find_sensor - Find a linked media entity which represents a sensor
- * @entity: Media entity to start searching from
- *
- * Return a pointer to sensor media entity or NULL if not found
- */
-static struct media_entity *camss_find_sensor(struct media_entity *entity)
-{
- struct media_pad *pad;
-
- while (1) {
- pad = &entity->pads[0];
- if (!(pad->flags & MEDIA_PAD_FL_SINK))
- return NULL;
-
- pad = media_entity_remote_pad(pad);
- if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
- return NULL;
-
- entity = pad->entity;
-
- if (entity->function == MEDIA_ENT_F_CAM_SENSOR)
- return entity;
- }
-}
-
-/*
- * camss_get_pixel_clock - Get pixel clock rate from sensor
- * @entity: Media entity in the current pipeline
- * @pixel_clock: Received pixel clock value
- *
- * Return 0 on success or a negative error code otherwise
- */
-int camss_get_pixel_clock(struct media_entity *entity, u32 *pixel_clock)
-{
- struct media_entity *sensor;
- struct v4l2_subdev *subdev;
- struct v4l2_ctrl *ctrl;
-
- sensor = camss_find_sensor(entity);
- if (!sensor)
- return -ENODEV;
-
- subdev = media_entity_to_v4l2_subdev(sensor);
-
- ctrl = v4l2_ctrl_find(subdev->ctrl_handler, V4L2_CID_PIXEL_RATE);
-
- if (!ctrl)
- return -EINVAL;
-
- *pixel_clock = v4l2_ctrl_g_ctrl_int64(ctrl);
-
- return 0;
-}
-
-/*
- * camss_of_parse_endpoint_node - Parse port endpoint node
- * @dev: Device
- * @node: Device node to be parsed
- * @csd: Parsed data from port endpoint node
- *
- * Return 0 on success or a negative error code on failure
- */
-static int camss_of_parse_endpoint_node(struct device *dev,
- struct device_node *node,
- struct camss_async_subdev *csd)
-{
- struct csiphy_lanes_cfg *lncfg = &csd->interface.csi2.lane_cfg;
- struct v4l2_fwnode_bus_mipi_csi2 *mipi_csi2;
- struct v4l2_fwnode_endpoint vep = { { 0 } };
- unsigned int i;
-
- v4l2_fwnode_endpoint_parse(of_fwnode_handle(node), &vep);
-
- csd->interface.csiphy_id = vep.base.port;
-
- mipi_csi2 = &vep.bus.mipi_csi2;
- lncfg->clk.pos = mipi_csi2->clock_lane;
- lncfg->clk.pol = mipi_csi2->lane_polarities[0];
- lncfg->num_data = mipi_csi2->num_data_lanes;
-
- lncfg->data = devm_kcalloc(dev,
- lncfg->num_data, sizeof(*lncfg->data),
- GFP_KERNEL);
- if (!lncfg->data)
- return -ENOMEM;
-
- for (i = 0; i < lncfg->num_data; i++) {
- lncfg->data[i].pos = mipi_csi2->data_lanes[i];
- lncfg->data[i].pol = mipi_csi2->lane_polarities[i + 1];
- }
-
- return 0;
-}
-
-/*
- * camss_of_parse_ports - Parse ports node
- * @dev: Device
- * @notifier: v4l2_device notifier data
- *
- * Return number of "port" nodes found in "ports" node
- */
-static int camss_of_parse_ports(struct device *dev,
- struct v4l2_async_notifier *notifier)
-{
- struct device_node *node = NULL;
- struct device_node *remote = NULL;
- unsigned int size, i;
- int ret;
-
- while ((node = of_graph_get_next_endpoint(dev->of_node, node)))
- if (of_device_is_available(node))
- notifier->num_subdevs++;
-
- size = sizeof(*notifier->subdevs) * notifier->num_subdevs;
- notifier->subdevs = devm_kzalloc(dev, size, GFP_KERNEL);
- if (!notifier->subdevs) {
- dev_err(dev, "Failed to allocate memory\n");
- return -ENOMEM;
- }
-
- i = 0;
- while ((node = of_graph_get_next_endpoint(dev->of_node, node))) {
- struct camss_async_subdev *csd;
-
- if (!of_device_is_available(node))
- continue;
-
- csd = devm_kzalloc(dev, sizeof(*csd), GFP_KERNEL);
- if (!csd) {
- of_node_put(node);
- dev_err(dev, "Failed to allocate memory\n");
- return -ENOMEM;
- }
-
- notifier->subdevs[i++] = &csd->asd;
-
- ret = camss_of_parse_endpoint_node(dev, node, csd);
- if (ret < 0) {
- of_node_put(node);
- return ret;
- }
-
- remote = of_graph_get_remote_port_parent(node);
- of_node_put(node);
-
- if (!remote) {
- dev_err(dev, "Cannot get remote parent\n");
- return -EINVAL;
- }
-
- csd->asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
- csd->asd.match.fwnode = of_fwnode_handle(remote);
- }
-
- return notifier->num_subdevs;
-}
-
-/*
- * camss_init_subdevices - Initialize subdev structures and resources
- * @camss: CAMSS device
- *
- * Return 0 on success or a negative error code on failure
- */
-static int camss_init_subdevices(struct camss *camss)
-{
- unsigned int i;
- int ret;
-
- for (i = 0; i < ARRAY_SIZE(camss->csiphy); i++) {
- ret = msm_csiphy_subdev_init(&camss->csiphy[i],
- &csiphy_res[i], i);
- if (ret < 0) {
- dev_err(camss->dev,
- "Failed to init csiphy%d sub-device: %d\n",
- i, ret);
- return ret;
- }
- }
-
- for (i = 0; i < ARRAY_SIZE(camss->csid); i++) {
- ret = msm_csid_subdev_init(&camss->csid[i],
- &csid_res[i], i);
- if (ret < 0) {
- dev_err(camss->dev,
- "Failed to init csid%d sub-device: %d\n",
- i, ret);
- return ret;
- }
- }
-
- ret = msm_ispif_subdev_init(&camss->ispif, &ispif_res);
- if (ret < 0) {
- dev_err(camss->dev, "Failed to init ispif sub-device: %d\n",
- ret);
- return ret;
- }
-
- ret = msm_vfe_subdev_init(&camss->vfe, &vfe_res);
- if (ret < 0) {
- dev_err(camss->dev, "Fail to init vfe sub-device: %d\n", ret);
- return ret;
- }
-
- return 0;
-}
-
-/*
- * camss_register_entities - Register subdev nodes and create links
- * @camss: CAMSS device
- *
- * Return 0 on success or a negative error code on failure
- */
-static int camss_register_entities(struct camss *camss)
-{
- int i, j;
- int ret;
-
- for (i = 0; i < ARRAY_SIZE(camss->csiphy); i++) {
- ret = msm_csiphy_register_entity(&camss->csiphy[i],
- &camss->v4l2_dev);
- if (ret < 0) {
- dev_err(camss->dev,
- "Failed to register csiphy%d entity: %d\n",
- i, ret);
- goto err_reg_csiphy;
- }
- }
-
- for (i = 0; i < ARRAY_SIZE(camss->csid); i++) {
- ret = msm_csid_register_entity(&camss->csid[i],
- &camss->v4l2_dev);
- if (ret < 0) {
- dev_err(camss->dev,
- "Failed to register csid%d entity: %d\n",
- i, ret);
- goto err_reg_csid;
- }
- }
-
- ret = msm_ispif_register_entities(&camss->ispif, &camss->v4l2_dev);
- if (ret < 0) {
- dev_err(camss->dev, "Failed to register ispif entities: %d\n",
- ret);
- goto err_reg_ispif;
- }
-
- ret = msm_vfe_register_entities(&camss->vfe, &camss->v4l2_dev);
- if (ret < 0) {
- dev_err(camss->dev, "Failed to register vfe entities: %d\n",
- ret);
- goto err_reg_vfe;
- }
-
- for (i = 0; i < ARRAY_SIZE(camss->csiphy); i++) {
- for (j = 0; j < ARRAY_SIZE(camss->csid); j++) {
- ret = media_create_pad_link(
- &camss->csiphy[i].subdev.entity,
- MSM_CSIPHY_PAD_SRC,
- &camss->csid[j].subdev.entity,
- MSM_CSID_PAD_SINK,
- 0);
- if (ret < 0) {
- dev_err(camss->dev,
- "Failed to link %s->%s entities: %d\n",
- camss->csiphy[i].subdev.entity.name,
- camss->csid[j].subdev.entity.name,
- ret);
- goto err_link;
- }
- }
- }
-
- for (i = 0; i < ARRAY_SIZE(camss->csid); i++) {
- for (j = 0; j < ARRAY_SIZE(camss->ispif.line); j++) {
- ret = media_create_pad_link(
- &camss->csid[i].subdev.entity,
- MSM_CSID_PAD_SRC,
- &camss->ispif.line[j].subdev.entity,
- MSM_ISPIF_PAD_SINK,
- 0);
- if (ret < 0) {
- dev_err(camss->dev,
- "Failed to link %s->%s entities: %d\n",
- camss->csid[i].subdev.entity.name,
- camss->ispif.line[j].subdev.entity.name,
- ret);
- goto err_link;
- }
- }
- }
-
- for (i = 0; i < ARRAY_SIZE(camss->ispif.line); i++) {
- for (j = 0; j < ARRAY_SIZE(camss->vfe.line); j++) {
- ret = media_create_pad_link(
- &camss->ispif.line[i].subdev.entity,
- MSM_ISPIF_PAD_SRC,
- &camss->vfe.line[j].subdev.entity,
- MSM_VFE_PAD_SINK,
- 0);
- if (ret < 0) {
- dev_err(camss->dev,
- "Failed to link %s->%s entities: %d\n",
- camss->ispif.line[i].subdev.entity.name,
- camss->vfe.line[j].subdev.entity.name,
- ret);
- goto err_link;
- }
- }
- }
-
- return 0;
-
-err_link:
- msm_vfe_unregister_entities(&camss->vfe);
-err_reg_vfe:
- msm_ispif_unregister_entities(&camss->ispif);
-err_reg_ispif:
-
- i = ARRAY_SIZE(camss->csid);
-err_reg_csid:
- for (i--; i >= 0; i--)
- msm_csid_unregister_entity(&camss->csid[i]);
-
- i = ARRAY_SIZE(camss->csiphy);
-err_reg_csiphy:
- for (i--; i >= 0; i--)
- msm_csiphy_unregister_entity(&camss->csiphy[i]);
-
- return ret;
-}
-
-/*
- * camss_unregister_entities - Unregister subdev nodes
- * @camss: CAMSS device
- *
- * Return 0 on success or a negative error code on failure
- */
-static void camss_unregister_entities(struct camss *camss)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(camss->csiphy); i++)
- msm_csiphy_unregister_entity(&camss->csiphy[i]);
-
- for (i = 0; i < ARRAY_SIZE(camss->csid); i++)
- msm_csid_unregister_entity(&camss->csid[i]);
-
- msm_ispif_unregister_entities(&camss->ispif);
- msm_vfe_unregister_entities(&camss->vfe);
-}
-
-static int camss_subdev_notifier_bound(struct v4l2_async_notifier *async,
- struct v4l2_subdev *subdev,
- struct v4l2_async_subdev *asd)
-{
- struct camss *camss = container_of(async, struct camss, notifier);
- struct camss_async_subdev *csd =
- container_of(asd, struct camss_async_subdev, asd);
- u8 id = csd->interface.csiphy_id;
- struct csiphy_device *csiphy = &camss->csiphy[id];
-
- csiphy->cfg.csi2 = &csd->interface.csi2;
- subdev->host_priv = csiphy;
-
- return 0;
-}
-
-static int camss_subdev_notifier_complete(struct v4l2_async_notifier *async)
-{
- struct camss *camss = container_of(async, struct camss, notifier);
- struct v4l2_device *v4l2_dev = &camss->v4l2_dev;
- struct v4l2_subdev *sd;
- int ret;
-
- list_for_each_entry(sd, &v4l2_dev->subdevs, list) {
- if (sd->host_priv) {
- struct media_entity *sensor = &sd->entity;
- struct csiphy_device *csiphy =
- (struct csiphy_device *) sd->host_priv;
- struct media_entity *input = &csiphy->subdev.entity;
- unsigned int i;
-
- for (i = 0; i < sensor->num_pads; i++) {
- if (sensor->pads[i].flags & MEDIA_PAD_FL_SOURCE)
- break;
- }
- if (i == sensor->num_pads) {
- dev_err(camss->dev,
- "No source pad in external entity\n");
- return -EINVAL;
- }
-
- ret = media_create_pad_link(sensor, i,
- input, MSM_CSIPHY_PAD_SINK,
- MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED);
- if (ret < 0) {
- dev_err(camss->dev,
- "Failed to link %s->%s entities: %d\n",
- sensor->name, input->name, ret);
- return ret;
- }
- }
- }
-
- ret = v4l2_device_register_subdev_nodes(&camss->v4l2_dev);
- if (ret < 0)
- return ret;
-
- return media_device_register(&camss->media_dev);
-}
-
-static const struct v4l2_async_notifier_operations camss_subdev_notifier_ops = {
- .bound = camss_subdev_notifier_bound,
- .complete = camss_subdev_notifier_complete,
-};
-
-static const struct media_device_ops camss_media_ops = {
- .link_notify = v4l2_pipeline_link_notify,
-};
-
-/*
- * camss_probe - Probe CAMSS platform device
- * @pdev: Pointer to CAMSS platform device
- *
- * Return 0 on success or a negative error code on failure
- */
-static int camss_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct camss *camss;
- int ret;
-
- camss = kzalloc(sizeof(*camss), GFP_KERNEL);
- if (!camss)
- return -ENOMEM;
-
- atomic_set(&camss->ref_count, 0);
- camss->dev = dev;
- platform_set_drvdata(pdev, camss);
-
- ret = camss_of_parse_ports(dev, &camss->notifier);
- if (ret < 0)
- return ret;
-
- ret = camss_init_subdevices(camss);
- if (ret < 0)
- return ret;
-
- ret = dma_set_mask_and_coherent(dev, 0xffffffff);
- if (ret)
- return ret;
-
- camss->media_dev.dev = camss->dev;
- strlcpy(camss->media_dev.model, "Qualcomm Camera Subsystem",
- sizeof(camss->media_dev.model));
- camss->media_dev.ops = &camss_media_ops;
- media_device_init(&camss->media_dev);
-
- camss->v4l2_dev.mdev = &camss->media_dev;
- ret = v4l2_device_register(camss->dev, &camss->v4l2_dev);
- if (ret < 0) {
- dev_err(dev, "Failed to register V4L2 device: %d\n", ret);
- return ret;
- }
-
- ret = camss_register_entities(camss);
- if (ret < 0)
- goto err_register_entities;
-
- if (camss->notifier.num_subdevs) {
- camss->notifier.ops = &camss_subdev_notifier_ops;
-
- ret = v4l2_async_notifier_register(&camss->v4l2_dev,
- &camss->notifier);
- if (ret) {
- dev_err(dev,
- "Failed to register async subdev nodes: %d\n",
- ret);
- goto err_register_subdevs;
- }
- } else {
- ret = v4l2_device_register_subdev_nodes(&camss->v4l2_dev);
- if (ret < 0) {
- dev_err(dev, "Failed to register subdev nodes: %d\n",
- ret);
- goto err_register_subdevs;
- }
-
- ret = media_device_register(&camss->media_dev);
- if (ret < 0) {
- dev_err(dev, "Failed to register media device: %d\n",
- ret);
- goto err_register_subdevs;
- }
- }
-
- return 0;
-
-err_register_subdevs:
- camss_unregister_entities(camss);
-err_register_entities:
- v4l2_device_unregister(&camss->v4l2_dev);
-
- return ret;
-}
-
-void camss_delete(struct camss *camss)
-{
- v4l2_device_unregister(&camss->v4l2_dev);
- media_device_unregister(&camss->media_dev);
- media_device_cleanup(&camss->media_dev);
-
- kfree(camss);
-}
-
-/*
- * camss_remove - Remove CAMSS platform device
- * @pdev: Pointer to CAMSS platform device
- *
- * Always returns 0.
- */
-static int camss_remove(struct platform_device *pdev)
-{
- struct camss *camss = platform_get_drvdata(pdev);
-
- msm_vfe_stop_streaming(&camss->vfe);
-
- v4l2_async_notifier_unregister(&camss->notifier);
- camss_unregister_entities(camss);
-
- if (atomic_read(&camss->ref_count) == 0)
- camss_delete(camss);
-
- return 0;
-}
-
-static const struct of_device_id camss_dt_match[] = {
- { .compatible = "qcom,msm8916-camss" },
- { }
-};
-
-MODULE_DEVICE_TABLE(of, camss_dt_match);
-
-static struct platform_driver qcom_camss_driver = {
- .probe = camss_probe,
- .remove = camss_remove,
- .driver = {
- .name = "qcom-camss",
- .of_match_table = camss_dt_match,
- },
-};
-
-module_platform_driver(qcom_camss_driver);
-
-MODULE_ALIAS("platform:qcom-camss");
-MODULE_DESCRIPTION("Qualcomm Camera Subsystem driver");
-MODULE_AUTHOR("Todor Tomov <todor.tomov@linaro.org>");
-MODULE_LICENSE("GPL v2");
deleted file mode 100644
@@ -1,106 +0,0 @@
-/*
- * camss.h
- *
- * Qualcomm MSM Camera Subsystem - Core
- *
- * Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (C) 2015-2017 Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef QC_MSM_CAMSS_H
-#define QC_MSM_CAMSS_H
-
-#include <linux/types.h>
-#include <media/v4l2-async.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-#include <media/media-device.h>
-#include <media/media-entity.h>
-#include <linux/device.h>
-
-#include "camss-csid.h"
-#include "camss-csiphy.h"
-#include "camss-ispif.h"
-#include "camss-vfe.h"
-
-#define CAMSS_CSID_NUM 2
-#define CAMSS_CSIPHY_NUM 2
-
-#define to_camss(ptr_module) \
- container_of(ptr_module, struct camss, ptr_module)
-
-#define to_device(ptr_module) \
- (to_camss(ptr_module)->dev)
-
-#define module_pointer(ptr_module, index) \
- ((const struct ptr_module##_device (*)[]) &(ptr_module[-(index)]))
-
-#define to_camss_index(ptr_module, index) \
- container_of(module_pointer(ptr_module, index), \
- struct camss, ptr_module)
-
-#define to_device_index(ptr_module, index) \
- (to_camss_index(ptr_module, index)->dev)
-
-#define CAMSS_RES_MAX 15
-
-struct resources {
- char *regulator[CAMSS_RES_MAX];
- char *clock[CAMSS_RES_MAX];
- u32 clock_rate[CAMSS_RES_MAX][CAMSS_RES_MAX];
- char *reg[CAMSS_RES_MAX];
- char *interrupt[CAMSS_RES_MAX];
-};
-
-struct resources_ispif {
- char *clock[CAMSS_RES_MAX];
- char *clock_for_reset[CAMSS_RES_MAX];
- char *reg[CAMSS_RES_MAX];
- char *interrupt;
-};
-
-struct camss {
- struct v4l2_device v4l2_dev;
- struct v4l2_async_notifier notifier;
- struct media_device media_dev;
- struct device *dev;
- struct csiphy_device csiphy[CAMSS_CSIPHY_NUM];
- struct csid_device csid[CAMSS_CSID_NUM];
- struct ispif_device ispif;
- struct vfe_device vfe;
- atomic_t ref_count;
-};
-
-struct camss_camera_interface {
- u8 csiphy_id;
- struct csiphy_csi2_cfg csi2;
-};
-
-struct camss_async_subdev {
- struct camss_camera_interface interface;
- struct v4l2_async_subdev asd;
-};
-
-struct camss_clock {
- struct clk *clk;
- const char *name;
- u32 *freq;
- u32 nfreqs;
-};
-
-void camss_add_clock_margin(u64 *rate);
-int camss_enable_clocks(int nclocks, struct camss_clock *clock,
- struct device *dev);
-void camss_disable_clocks(int nclocks, struct camss_clock *clock);
-int camss_get_pixel_clock(struct media_entity *entity, u32 *pixel_clock);
-void camss_delete(struct camss *camss);
-
-#endif /* QC_MSM_CAMSS_H */
new file mode 100644
@@ -0,0 +1,11 @@
+# Makefile for Qualcomm CAMSS driver
+
+qcom-camss-objs += \
+ camss.o \
+ camss-csid.o \
+ camss-csiphy.o \
+ camss-ispif.o \
+ camss-vfe.o \
+ camss-video.o \
+
+obj-$(CONFIG_VIDEO_QCOM_CAMSS) += qcom-camss.o
new file mode 100644
@@ -0,0 +1,1094 @@
+/*
+ * camss-csid.c
+ *
+ * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module
+ *
+ * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015-2018 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <media/media-entity.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+#include "camss-csid.h"
+#include "camss.h"
+
+#define MSM_CSID_NAME "msm_csid"
+
+#define CAMSS_CSID_HW_VERSION 0x0
+#define CAMSS_CSID_CORE_CTRL_0 0x004
+#define CAMSS_CSID_CORE_CTRL_1 0x008
+#define CAMSS_CSID_RST_CMD 0x00c
+#define CAMSS_CSID_CID_LUT_VC_n(n) (0x010 + 0x4 * (n))
+#define CAMSS_CSID_CID_n_CFG(n) (0x020 + 0x4 * (n))
+#define CAMSS_CSID_IRQ_CLEAR_CMD 0x060
+#define CAMSS_CSID_IRQ_MASK 0x064
+#define CAMSS_CSID_IRQ_STATUS 0x068
+#define CAMSS_CSID_TG_CTRL 0x0a0
+#define CAMSS_CSID_TG_CTRL_DISABLE 0xa06436
+#define CAMSS_CSID_TG_CTRL_ENABLE 0xa06437
+#define CAMSS_CSID_TG_VC_CFG 0x0a4
+#define CAMSS_CSID_TG_VC_CFG_H_BLANKING 0x3ff
+#define CAMSS_CSID_TG_VC_CFG_V_BLANKING 0x7f
+#define CAMSS_CSID_TG_DT_n_CGG_0(n) (0x0ac + 0xc * (n))
+#define CAMSS_CSID_TG_DT_n_CGG_1(n) (0x0b0 + 0xc * (n))
+#define CAMSS_CSID_TG_DT_n_CGG_2(n) (0x0b4 + 0xc * (n))
+
+#define DATA_TYPE_EMBEDDED_DATA_8BIT 0x12
+#define DATA_TYPE_YUV422_8BIT 0x1e
+#define DATA_TYPE_RAW_6BIT 0x28
+#define DATA_TYPE_RAW_8BIT 0x2a
+#define DATA_TYPE_RAW_10BIT 0x2b
+#define DATA_TYPE_RAW_12BIT 0x2c
+
+#define DECODE_FORMAT_UNCOMPRESSED_6_BIT 0x0
+#define DECODE_FORMAT_UNCOMPRESSED_8_BIT 0x1
+#define DECODE_FORMAT_UNCOMPRESSED_10_BIT 0x2
+#define DECODE_FORMAT_UNCOMPRESSED_12_BIT 0x3
+
+#define CSID_RESET_TIMEOUT_MS 500
+
+struct csid_fmts {
+ u32 code;
+ u8 data_type;
+ u8 decode_format;
+ u8 bpp;
+ u8 spp; /* bus samples per pixel */
+};
+
+static const struct csid_fmts csid_input_fmts[] = {
+ {
+ MEDIA_BUS_FMT_UYVY8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_VYUY8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_YUYV8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_YVYU8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ }
+};
+
+static const struct csid_fmts *csid_get_fmt_entry(u32 code)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(csid_input_fmts); i++)
+ if (code == csid_input_fmts[i].code)
+ return &csid_input_fmts[i];
+
+ WARN(1, "Unknown format\n");
+
+ return &csid_input_fmts[0];
+}
+
+/*
+ * csid_isr - CSID module interrupt handler
+ * @irq: Interrupt line
+ * @dev: CSID device
+ *
+ * Return IRQ_HANDLED on success
+ */
+static irqreturn_t csid_isr(int irq, void *dev)
+{
+ struct csid_device *csid = dev;
+ u32 value;
+
+ value = readl_relaxed(csid->base + CAMSS_CSID_IRQ_STATUS);
+ writel_relaxed(value, csid->base + CAMSS_CSID_IRQ_CLEAR_CMD);
+
+ if ((value >> 11) & 0x1)
+ complete(&csid->reset_complete);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * csid_set_clock_rates - Calculate and set clock rates on CSID module
+ * @csiphy: CSID device
+ */
+static int csid_set_clock_rates(struct csid_device *csid)
+{
+ struct device *dev = to_device_index(csid, csid->id);
+ u32 pixel_clock;
+ int i, j;
+ int ret;
+
+ ret = camss_get_pixel_clock(&csid->subdev.entity, &pixel_clock);
+ if (ret)
+ pixel_clock = 0;
+
+ for (i = 0; i < csid->nclocks; i++) {
+ struct camss_clock *clock = &csid->clock[i];
+
+ if (!strcmp(clock->name, "csi0") ||
+ !strcmp(clock->name, "csi1")) {
+ u8 bpp = csid_get_fmt_entry(
+ csid->fmt[MSM_CSIPHY_PAD_SINK].code)->bpp;
+ u8 num_lanes = csid->phy.lane_cnt;
+ u64 min_rate = pixel_clock * bpp / (2 * num_lanes * 4);
+ long rate;
+
+ camss_add_clock_margin(&min_rate);
+
+ for (j = 0; j < clock->nfreqs; j++)
+ if (min_rate < clock->freq[j])
+ break;
+
+ if (j == clock->nfreqs) {
+ dev_err(dev,
+ "Pixel clock is too high for CSID\n");
+ return -EINVAL;
+ }
+
+ /* if sensor pixel clock is not available */
+ /* set highest possible CSID clock rate */
+ if (min_rate == 0)
+ j = clock->nfreqs - 1;
+
+ rate = clk_round_rate(clock->clk, clock->freq[j]);
+ if (rate < 0) {
+ dev_err(dev, "clk round rate failed: %ld\n",
+ rate);
+ return -EINVAL;
+ }
+
+ ret = clk_set_rate(clock->clk, rate);
+ if (ret < 0) {
+ dev_err(dev, "clk set rate failed: %d\n", ret);
+ return ret;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * csid_reset - Trigger reset on CSID module and wait to complete
+ * @csid: CSID device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csid_reset(struct csid_device *csid)
+{
+ unsigned long time;
+
+ reinit_completion(&csid->reset_complete);
+
+ writel_relaxed(0x7fff, csid->base + CAMSS_CSID_RST_CMD);
+
+ time = wait_for_completion_timeout(&csid->reset_complete,
+ msecs_to_jiffies(CSID_RESET_TIMEOUT_MS));
+ if (!time) {
+ dev_err(to_device_index(csid, csid->id),
+ "CSID reset timeout\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/*
+ * csid_set_power - Power on/off CSID module
+ * @sd: CSID V4L2 subdevice
+ * @on: Requested power state
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csid_set_power(struct v4l2_subdev *sd, int on)
+{
+ struct csid_device *csid = v4l2_get_subdevdata(sd);
+ struct device *dev = to_device_index(csid, csid->id);
+ int ret;
+
+ if (on) {
+ u32 hw_version;
+
+ ret = regulator_enable(csid->vdda);
+ if (ret < 0)
+ return ret;
+
+ ret = csid_set_clock_rates(csid);
+ if (ret < 0) {
+ regulator_disable(csid->vdda);
+ return ret;
+ }
+
+ ret = camss_enable_clocks(csid->nclocks, csid->clock, dev);
+ if (ret < 0) {
+ regulator_disable(csid->vdda);
+ return ret;
+ }
+
+ enable_irq(csid->irq);
+
+ ret = csid_reset(csid);
+ if (ret < 0) {
+ disable_irq(csid->irq);
+ camss_disable_clocks(csid->nclocks, csid->clock);
+ regulator_disable(csid->vdda);
+ return ret;
+ }
+
+ hw_version = readl_relaxed(csid->base + CAMSS_CSID_HW_VERSION);
+ dev_dbg(dev, "CSID HW Version = 0x%08x\n", hw_version);
+ } else {
+ disable_irq(csid->irq);
+ camss_disable_clocks(csid->nclocks, csid->clock);
+ ret = regulator_disable(csid->vdda);
+ }
+
+ return ret;
+}
+
+/*
+ * csid_set_stream - Enable/disable streaming on CSID module
+ * @sd: CSID V4L2 subdevice
+ * @enable: Requested streaming state
+ *
+ * Main configuration of CSID module is also done here.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csid_set_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct csid_device *csid = v4l2_get_subdevdata(sd);
+ struct csid_testgen_config *tg = &csid->testgen;
+ u32 val;
+
+ if (enable) {
+ u8 vc = 0; /* Virtual Channel 0 */
+ u8 cid = vc * 4; /* id of Virtual Channel and Data Type set */
+ u8 dt, dt_shift, df;
+ int ret;
+
+ ret = v4l2_ctrl_handler_setup(&csid->ctrls);
+ if (ret < 0) {
+ dev_err(to_device_index(csid, csid->id),
+ "could not sync v4l2 controls: %d\n", ret);
+ return ret;
+ }
+
+ if (!tg->enabled &&
+ !media_entity_remote_pad(&csid->pads[MSM_CSID_PAD_SINK]))
+ return -ENOLINK;
+
+ dt = csid_get_fmt_entry(csid->fmt[MSM_CSID_PAD_SRC].code)->
+ data_type;
+
+ if (tg->enabled) {
+ /* Config Test Generator */
+ struct v4l2_mbus_framefmt *f =
+ &csid->fmt[MSM_CSID_PAD_SRC];
+ u8 bpp = csid_get_fmt_entry(f->code)->bpp;
+ u8 spp = csid_get_fmt_entry(f->code)->spp;
+ u32 num_bytes_per_line = f->width * bpp * spp / 8;
+ u32 num_lines = f->height;
+
+ /* 31:24 V blank, 23:13 H blank, 3:2 num of active DT */
+ /* 1:0 VC */
+ val = ((CAMSS_CSID_TG_VC_CFG_V_BLANKING & 0xff) << 24) |
+ ((CAMSS_CSID_TG_VC_CFG_H_BLANKING & 0x7ff) << 13);
+ writel_relaxed(val, csid->base + CAMSS_CSID_TG_VC_CFG);
+
+ /* 28:16 bytes per lines, 12:0 num of lines */
+ val = ((num_bytes_per_line & 0x1fff) << 16) |
+ (num_lines & 0x1fff);
+ writel_relaxed(val, csid->base +
+ CAMSS_CSID_TG_DT_n_CGG_0(0));
+
+ /* 5:0 data type */
+ val = dt;
+ writel_relaxed(val, csid->base +
+ CAMSS_CSID_TG_DT_n_CGG_1(0));
+
+ /* 2:0 output test pattern */
+ val = tg->payload_mode;
+ writel_relaxed(val, csid->base +
+ CAMSS_CSID_TG_DT_n_CGG_2(0));
+ } else {
+ struct csid_phy_config *phy = &csid->phy;
+
+ val = phy->lane_cnt - 1;
+ val |= phy->lane_assign << 4;
+
+ writel_relaxed(val,
+ csid->base + CAMSS_CSID_CORE_CTRL_0);
+
+ val = phy->csiphy_id << 17;
+ val |= 0x9;
+
+ writel_relaxed(val,
+ csid->base + CAMSS_CSID_CORE_CTRL_1);
+ }
+
+ /* Config LUT */
+
+ dt_shift = (cid % 4) * 8;
+ df = csid_get_fmt_entry(csid->fmt[MSM_CSID_PAD_SINK].code)->
+ decode_format;
+
+ val = readl_relaxed(csid->base + CAMSS_CSID_CID_LUT_VC_n(vc));
+ val &= ~(0xff << dt_shift);
+ val |= dt << dt_shift;
+ writel_relaxed(val, csid->base + CAMSS_CSID_CID_LUT_VC_n(vc));
+
+ val = (df << 4) | 0x3;
+ writel_relaxed(val, csid->base + CAMSS_CSID_CID_n_CFG(cid));
+
+ if (tg->enabled) {
+ val = CAMSS_CSID_TG_CTRL_ENABLE;
+ writel_relaxed(val, csid->base + CAMSS_CSID_TG_CTRL);
+ }
+ } else {
+ if (tg->enabled) {
+ val = CAMSS_CSID_TG_CTRL_DISABLE;
+ writel_relaxed(val, csid->base + CAMSS_CSID_TG_CTRL);
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * __csid_get_format - Get pointer to format structure
+ * @csid: CSID device
+ * @cfg: V4L2 subdev pad configuration
+ * @pad: pad from which format is requested
+ * @which: TRY or ACTIVE format
+ *
+ * Return pointer to TRY or ACTIVE format structure
+ */
+static struct v4l2_mbus_framefmt *
+__csid_get_format(struct csid_device *csid,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad,
+ enum v4l2_subdev_format_whence which)
+{
+ if (which == V4L2_SUBDEV_FORMAT_TRY)
+ return v4l2_subdev_get_try_format(&csid->subdev, cfg, pad);
+
+ return &csid->fmt[pad];
+}
+
+/*
+ * csid_try_format - Handle try format by pad subdev method
+ * @csid: CSID device
+ * @cfg: V4L2 subdev pad configuration
+ * @pad: pad on which format is requested
+ * @fmt: pointer to v4l2 format structure
+ * @which: wanted subdev format
+ */
+static void csid_try_format(struct csid_device *csid,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad,
+ struct v4l2_mbus_framefmt *fmt,
+ enum v4l2_subdev_format_whence which)
+{
+ unsigned int i;
+
+ switch (pad) {
+ case MSM_CSID_PAD_SINK:
+ /* Set format on sink pad */
+
+ for (i = 0; i < ARRAY_SIZE(csid_input_fmts); i++)
+ if (fmt->code == csid_input_fmts[i].code)
+ break;
+
+ /* If not found, use UYVY as default */
+ if (i >= ARRAY_SIZE(csid_input_fmts))
+ fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
+
+ fmt->width = clamp_t(u32, fmt->width, 1, 8191);
+ fmt->height = clamp_t(u32, fmt->height, 1, 8191);
+
+ fmt->field = V4L2_FIELD_NONE;
+ fmt->colorspace = V4L2_COLORSPACE_SRGB;
+
+ break;
+
+ case MSM_CSID_PAD_SRC:
+ if (csid->testgen_mode->cur.val == 0) {
+ /* Test generator is disabled, keep pad formats */
+ /* in sync - set and return a format same as sink pad */
+ struct v4l2_mbus_framefmt format;
+
+ format = *__csid_get_format(csid, cfg,
+ MSM_CSID_PAD_SINK, which);
+ *fmt = format;
+ } else {
+ /* Test generator is enabled, set format on source*/
+ /* pad to allow test generator usage */
+
+ for (i = 0; i < ARRAY_SIZE(csid_input_fmts); i++)
+ if (csid_input_fmts[i].code == fmt->code)
+ break;
+
+ /* If not found, use UYVY as default */
+ if (i >= ARRAY_SIZE(csid_input_fmts))
+ fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
+
+ fmt->width = clamp_t(u32, fmt->width, 1, 8191);
+ fmt->height = clamp_t(u32, fmt->height, 1, 8191);
+
+ fmt->field = V4L2_FIELD_NONE;
+ }
+ break;
+ }
+
+ fmt->colorspace = V4L2_COLORSPACE_SRGB;
+}
+
+/*
+ * csid_enum_mbus_code - Handle pixel format enumeration
+ * @sd: CSID V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @code: pointer to v4l2_subdev_mbus_code_enum structure
+ * return -EINVAL or zero on success
+ */
+static int csid_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ struct csid_device *csid = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ if (code->pad == MSM_CSID_PAD_SINK) {
+ if (code->index >= ARRAY_SIZE(csid_input_fmts))
+ return -EINVAL;
+
+ code->code = csid_input_fmts[code->index].code;
+ } else {
+ if (csid->testgen_mode->cur.val == 0) {
+ if (code->index > 0)
+ return -EINVAL;
+
+ format = __csid_get_format(csid, cfg, MSM_CSID_PAD_SINK,
+ code->which);
+
+ code->code = format->code;
+ } else {
+ if (code->index >= ARRAY_SIZE(csid_input_fmts))
+ return -EINVAL;
+
+ code->code = csid_input_fmts[code->index].code;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * csid_enum_frame_size - Handle frame size enumeration
+ * @sd: CSID V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @fse: pointer to v4l2_subdev_frame_size_enum structure
+ * return -EINVAL or zero on success
+ */
+static int csid_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ struct csid_device *csid = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt format;
+
+ if (fse->index != 0)
+ return -EINVAL;
+
+ format.code = fse->code;
+ format.width = 1;
+ format.height = 1;
+ csid_try_format(csid, cfg, fse->pad, &format, fse->which);
+ fse->min_width = format.width;
+ fse->min_height = format.height;
+
+ if (format.code != fse->code)
+ return -EINVAL;
+
+ format.code = fse->code;
+ format.width = -1;
+ format.height = -1;
+ csid_try_format(csid, cfg, fse->pad, &format, fse->which);
+ fse->max_width = format.width;
+ fse->max_height = format.height;
+
+ return 0;
+}
+
+/*
+ * csid_get_format - Handle get format by pads subdev method
+ * @sd: CSID V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @fmt: pointer to v4l2 subdev format structure
+ *
+ * Return -EINVAL or zero on success
+ */
+static int csid_get_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct csid_device *csid = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ format = __csid_get_format(csid, cfg, fmt->pad, fmt->which);
+ if (format == NULL)
+ return -EINVAL;
+
+ fmt->format = *format;
+
+ return 0;
+}
+
+/*
+ * csid_set_format - Handle set format by pads subdev method
+ * @sd: CSID V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @fmt: pointer to v4l2 subdev format structure
+ *
+ * Return -EINVAL or zero on success
+ */
+static int csid_set_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct csid_device *csid = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ format = __csid_get_format(csid, cfg, fmt->pad, fmt->which);
+ if (format == NULL)
+ return -EINVAL;
+
+ csid_try_format(csid, cfg, fmt->pad, &fmt->format, fmt->which);
+ *format = fmt->format;
+
+ /* Propagate the format from sink to source */
+ if (fmt->pad == MSM_CSID_PAD_SINK) {
+ format = __csid_get_format(csid, cfg, MSM_CSID_PAD_SRC,
+ fmt->which);
+
+ *format = fmt->format;
+ csid_try_format(csid, cfg, MSM_CSID_PAD_SRC, format,
+ fmt->which);
+ }
+
+ return 0;
+}
+
+/*
+ * csid_init_formats - Initialize formats on all pads
+ * @sd: CSID V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ *
+ * Initialize all pad formats with default values.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csid_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_subdev_format format = {
+ .pad = MSM_CSID_PAD_SINK,
+ .which = fh ? V4L2_SUBDEV_FORMAT_TRY :
+ V4L2_SUBDEV_FORMAT_ACTIVE,
+ .format = {
+ .code = MEDIA_BUS_FMT_UYVY8_2X8,
+ .width = 1920,
+ .height = 1080
+ }
+ };
+
+ return csid_set_format(sd, fh ? fh->pad : NULL, &format);
+}
+
+static const char * const csid_test_pattern_menu[] = {
+ "Disabled",
+ "Incrementing",
+ "Alternating 0x55/0xAA",
+ "All Zeros 0x00",
+ "All Ones 0xFF",
+ "Pseudo-random Data",
+};
+
+/*
+ * csid_set_test_pattern - Set test generator's pattern mode
+ * @csid: CSID device
+ * @value: desired test pattern mode
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csid_set_test_pattern(struct csid_device *csid, s32 value)
+{
+ struct csid_testgen_config *tg = &csid->testgen;
+
+ /* If CSID is linked to CSIPHY, do not allow to enable test generator */
+ if (value && media_entity_remote_pad(&csid->pads[MSM_CSID_PAD_SINK]))
+ return -EBUSY;
+
+ tg->enabled = !!value;
+
+ switch (value) {
+ case 1:
+ tg->payload_mode = CSID_PAYLOAD_MODE_INCREMENTING;
+ break;
+ case 2:
+ tg->payload_mode = CSID_PAYLOAD_MODE_ALTERNATING_55_AA;
+ break;
+ case 3:
+ tg->payload_mode = CSID_PAYLOAD_MODE_ALL_ZEROES;
+ break;
+ case 4:
+ tg->payload_mode = CSID_PAYLOAD_MODE_ALL_ONES;
+ break;
+ case 5:
+ tg->payload_mode = CSID_PAYLOAD_MODE_RANDOM;
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * csid_s_ctrl - Handle set control subdev method
+ * @ctrl: pointer to v4l2 control structure
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csid_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct csid_device *csid = container_of(ctrl->handler,
+ struct csid_device, ctrls);
+ int ret = -EINVAL;
+
+ switch (ctrl->id) {
+ case V4L2_CID_TEST_PATTERN:
+ ret = csid_set_test_pattern(csid, ctrl->val);
+ break;
+ }
+
+ return ret;
+}
+
+static const struct v4l2_ctrl_ops csid_ctrl_ops = {
+ .s_ctrl = csid_s_ctrl,
+};
+
+/*
+ * msm_csid_subdev_init - Initialize CSID device structure and resources
+ * @csid: CSID device
+ * @res: CSID module resources table
+ * @id: CSID module id
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int msm_csid_subdev_init(struct csid_device *csid,
+ const struct resources *res, u8 id)
+{
+ struct device *dev = to_device_index(csid, id);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *r;
+ int i, j;
+ int ret;
+
+ csid->id = id;
+
+ /* Memory */
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[0]);
+ csid->base = devm_ioremap_resource(dev, r);
+ if (IS_ERR(csid->base)) {
+ dev_err(dev, "could not map memory\n");
+ return PTR_ERR(csid->base);
+ }
+
+ /* Interrupt */
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
+ res->interrupt[0]);
+ if (!r) {
+ dev_err(dev, "missing IRQ\n");
+ return -EINVAL;
+ }
+
+ csid->irq = r->start;
+ snprintf(csid->irq_name, sizeof(csid->irq_name), "%s_%s%d",
+ dev_name(dev), MSM_CSID_NAME, csid->id);
+ ret = devm_request_irq(dev, csid->irq, csid_isr,
+ IRQF_TRIGGER_RISING, csid->irq_name, csid);
+ if (ret < 0) {
+ dev_err(dev, "request_irq failed: %d\n", ret);
+ return ret;
+ }
+
+ disable_irq(csid->irq);
+
+ /* Clocks */
+
+ csid->nclocks = 0;
+ while (res->clock[csid->nclocks])
+ csid->nclocks++;
+
+ csid->clock = devm_kcalloc(dev, csid->nclocks, sizeof(*csid->clock),
+ GFP_KERNEL);
+ if (!csid->clock)
+ return -ENOMEM;
+
+ for (i = 0; i < csid->nclocks; i++) {
+ struct camss_clock *clock = &csid->clock[i];
+
+ clock->clk = devm_clk_get(dev, res->clock[i]);
+ if (IS_ERR(clock->clk))
+ return PTR_ERR(clock->clk);
+
+ clock->name = res->clock[i];
+
+ clock->nfreqs = 0;
+ while (res->clock_rate[i][clock->nfreqs])
+ clock->nfreqs++;
+
+ if (!clock->nfreqs) {
+ clock->freq = NULL;
+ continue;
+ }
+
+ clock->freq = devm_kcalloc(dev,
+ clock->nfreqs,
+ sizeof(*clock->freq),
+ GFP_KERNEL);
+ if (!clock->freq)
+ return -ENOMEM;
+
+ for (j = 0; j < clock->nfreqs; j++)
+ clock->freq[j] = res->clock_rate[i][j];
+ }
+
+ /* Regulator */
+
+ csid->vdda = devm_regulator_get(dev, res->regulator[0]);
+ if (IS_ERR(csid->vdda)) {
+ dev_err(dev, "could not get regulator\n");
+ return PTR_ERR(csid->vdda);
+ }
+
+ init_completion(&csid->reset_complete);
+
+ return 0;
+}
+
+/*
+ * msm_csid_get_csid_id - Get CSID HW module id
+ * @entity: Pointer to CSID media entity structure
+ * @id: Return CSID HW module id here
+ */
+void msm_csid_get_csid_id(struct media_entity *entity, u8 *id)
+{
+ struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+ struct csid_device *csid = v4l2_get_subdevdata(sd);
+
+ *id = csid->id;
+}
+
+/*
+ * csid_get_lane_assign - Calculate CSI2 lane assign configuration parameter
+ * @lane_cfg - CSI2 lane configuration
+ *
+ * Return lane assign
+ */
+static u32 csid_get_lane_assign(struct csiphy_lanes_cfg *lane_cfg)
+{
+ u32 lane_assign = 0;
+ int i;
+
+ for (i = 0; i < lane_cfg->num_data; i++)
+ lane_assign |= lane_cfg->data[i].pos << (i * 4);
+
+ return lane_assign;
+}
+
+/*
+ * csid_link_setup - Setup CSID connections
+ * @entity: Pointer to media entity structure
+ * @local: Pointer to local pad
+ * @remote: Pointer to remote pad
+ * @flags: Link flags
+ *
+ * Return 0 on success
+ */
+static int csid_link_setup(struct media_entity *entity,
+ const struct media_pad *local,
+ const struct media_pad *remote, u32 flags)
+{
+ if (flags & MEDIA_LNK_FL_ENABLED)
+ if (media_entity_remote_pad(local))
+ return -EBUSY;
+
+ if ((local->flags & MEDIA_PAD_FL_SINK) &&
+ (flags & MEDIA_LNK_FL_ENABLED)) {
+ struct v4l2_subdev *sd;
+ struct csid_device *csid;
+ struct csiphy_device *csiphy;
+ struct csiphy_lanes_cfg *lane_cfg;
+ struct v4l2_subdev_format format = { 0 };
+
+ sd = media_entity_to_v4l2_subdev(entity);
+ csid = v4l2_get_subdevdata(sd);
+
+ /* If test generator is enabled */
+ /* do not allow a link from CSIPHY to CSID */
+ if (csid->testgen_mode->cur.val != 0)
+ return -EBUSY;
+
+ sd = media_entity_to_v4l2_subdev(remote->entity);
+ csiphy = v4l2_get_subdevdata(sd);
+
+ /* If a sensor is not linked to CSIPHY */
+ /* do no allow a link from CSIPHY to CSID */
+ if (!csiphy->cfg.csi2)
+ return -EPERM;
+
+ csid->phy.csiphy_id = csiphy->id;
+
+ lane_cfg = &csiphy->cfg.csi2->lane_cfg;
+ csid->phy.lane_cnt = lane_cfg->num_data;
+ csid->phy.lane_assign = csid_get_lane_assign(lane_cfg);
+
+ /* Reset format on source pad to sink pad format */
+ format.pad = MSM_CSID_PAD_SRC;
+ format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ csid_set_format(&csid->subdev, NULL, &format);
+ }
+
+ return 0;
+}
+
+static const struct v4l2_subdev_core_ops csid_core_ops = {
+ .s_power = csid_set_power,
+};
+
+static const struct v4l2_subdev_video_ops csid_video_ops = {
+ .s_stream = csid_set_stream,
+};
+
+static const struct v4l2_subdev_pad_ops csid_pad_ops = {
+ .enum_mbus_code = csid_enum_mbus_code,
+ .enum_frame_size = csid_enum_frame_size,
+ .get_fmt = csid_get_format,
+ .set_fmt = csid_set_format,
+};
+
+static const struct v4l2_subdev_ops csid_v4l2_ops = {
+ .core = &csid_core_ops,
+ .video = &csid_video_ops,
+ .pad = &csid_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops csid_v4l2_internal_ops = {
+ .open = csid_init_formats,
+};
+
+static const struct media_entity_operations csid_media_ops = {
+ .link_setup = csid_link_setup,
+ .link_validate = v4l2_subdev_link_validate,
+};
+
+/*
+ * msm_csid_register_entity - Register subdev node for CSID module
+ * @csid: CSID device
+ * @v4l2_dev: V4L2 device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int msm_csid_register_entity(struct csid_device *csid,
+ struct v4l2_device *v4l2_dev)
+{
+ struct v4l2_subdev *sd = &csid->subdev;
+ struct media_pad *pads = csid->pads;
+ struct device *dev = to_device_index(csid, csid->id);
+ int ret;
+
+ v4l2_subdev_init(sd, &csid_v4l2_ops);
+ sd->internal_ops = &csid_v4l2_internal_ops;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d",
+ MSM_CSID_NAME, csid->id);
+ v4l2_set_subdevdata(sd, csid);
+
+ ret = v4l2_ctrl_handler_init(&csid->ctrls, 1);
+ if (ret < 0) {
+ dev_err(dev, "Failed to init ctrl handler: %d\n", ret);
+ return ret;
+ }
+
+ csid->testgen_mode = v4l2_ctrl_new_std_menu_items(&csid->ctrls,
+ &csid_ctrl_ops, V4L2_CID_TEST_PATTERN,
+ ARRAY_SIZE(csid_test_pattern_menu) - 1, 0, 0,
+ csid_test_pattern_menu);
+
+ if (csid->ctrls.error) {
+ dev_err(dev, "Failed to init ctrl: %d\n", csid->ctrls.error);
+ ret = csid->ctrls.error;
+ goto free_ctrl;
+ }
+
+ csid->subdev.ctrl_handler = &csid->ctrls;
+
+ ret = csid_init_formats(sd, NULL);
+ if (ret < 0) {
+ dev_err(dev, "Failed to init format: %d\n", ret);
+ goto free_ctrl;
+ }
+
+ pads[MSM_CSID_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+ pads[MSM_CSID_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
+
+ sd->entity.function = MEDIA_ENT_F_IO_V4L;
+ sd->entity.ops = &csid_media_ops;
+ ret = media_entity_pads_init(&sd->entity, MSM_CSID_PADS_NUM, pads);
+ if (ret < 0) {
+ dev_err(dev, "Failed to init media entity: %d\n", ret);
+ goto free_ctrl;
+ }
+
+ ret = v4l2_device_register_subdev(v4l2_dev, sd);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register subdev: %d\n", ret);
+ goto media_cleanup;
+ }
+
+ return 0;
+
+media_cleanup:
+ media_entity_cleanup(&sd->entity);
+free_ctrl:
+ v4l2_ctrl_handler_free(&csid->ctrls);
+
+ return ret;
+}
+
+/*
+ * msm_csid_unregister_entity - Unregister CSID module subdev node
+ * @csid: CSID device
+ */
+void msm_csid_unregister_entity(struct csid_device *csid)
+{
+ v4l2_device_unregister_subdev(&csid->subdev);
+ media_entity_cleanup(&csid->subdev.entity);
+ v4l2_ctrl_handler_free(&csid->ctrls);
+}
new file mode 100644
@@ -0,0 +1,82 @@
+/*
+ * camss-csid.h
+ *
+ * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module
+ *
+ * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015-2018 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef QC_MSM_CAMSS_CSID_H
+#define QC_MSM_CAMSS_CSID_H
+
+#include <linux/clk.h>
+#include <media/media-entity.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-mediabus.h>
+#include <media/v4l2-subdev.h>
+
+#define MSM_CSID_PAD_SINK 0
+#define MSM_CSID_PAD_SRC 1
+#define MSM_CSID_PADS_NUM 2
+
+enum csid_payload_mode {
+ CSID_PAYLOAD_MODE_INCREMENTING = 0,
+ CSID_PAYLOAD_MODE_ALTERNATING_55_AA = 1,
+ CSID_PAYLOAD_MODE_ALL_ZEROES = 2,
+ CSID_PAYLOAD_MODE_ALL_ONES = 3,
+ CSID_PAYLOAD_MODE_RANDOM = 4,
+ CSID_PAYLOAD_MODE_USER_SPECIFIED = 5,
+};
+
+struct csid_testgen_config {
+ u8 enabled;
+ enum csid_payload_mode payload_mode;
+};
+
+struct csid_phy_config {
+ u8 csiphy_id;
+ u8 lane_cnt;
+ u32 lane_assign;
+};
+
+struct csid_device {
+ u8 id;
+ struct v4l2_subdev subdev;
+ struct media_pad pads[MSM_CSID_PADS_NUM];
+ void __iomem *base;
+ u32 irq;
+ char irq_name[30];
+ struct camss_clock *clock;
+ int nclocks;
+ struct regulator *vdda;
+ struct completion reset_complete;
+ struct csid_testgen_config testgen;
+ struct csid_phy_config phy;
+ struct v4l2_mbus_framefmt fmt[MSM_CSID_PADS_NUM];
+ struct v4l2_ctrl_handler ctrls;
+ struct v4l2_ctrl *testgen_mode;
+};
+
+struct resources;
+
+int msm_csid_subdev_init(struct csid_device *csid,
+ const struct resources *res, u8 id);
+
+int msm_csid_register_entity(struct csid_device *csid,
+ struct v4l2_device *v4l2_dev);
+
+void msm_csid_unregister_entity(struct csid_device *csid);
+
+void msm_csid_get_csid_id(struct media_entity *entity, u8 *id);
+
+#endif /* QC_MSM_CAMSS_CSID_H */
new file mode 100644
@@ -0,0 +1,893 @@
+/*
+ * camss-csiphy.c
+ *
+ * Qualcomm MSM Camera Subsystem - CSIPHY Module
+ *
+ * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2016-2018 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <media/media-entity.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+#include "camss-csiphy.h"
+#include "camss.h"
+
+#define MSM_CSIPHY_NAME "msm_csiphy"
+
+#define CAMSS_CSI_PHY_LNn_CFG2(n) (0x004 + 0x40 * (n))
+#define CAMSS_CSI_PHY_LNn_CFG3(n) (0x008 + 0x40 * (n))
+#define CAMSS_CSI_PHY_GLBL_RESET 0x140
+#define CAMSS_CSI_PHY_GLBL_PWR_CFG 0x144
+#define CAMSS_CSI_PHY_GLBL_IRQ_CMD 0x164
+#define CAMSS_CSI_PHY_HW_VERSION 0x188
+#define CAMSS_CSI_PHY_INTERRUPT_STATUSn(n) (0x18c + 0x4 * (n))
+#define CAMSS_CSI_PHY_INTERRUPT_MASKn(n) (0x1ac + 0x4 * (n))
+#define CAMSS_CSI_PHY_INTERRUPT_CLEARn(n) (0x1cc + 0x4 * (n))
+#define CAMSS_CSI_PHY_GLBL_T_INIT_CFG0 0x1ec
+#define CAMSS_CSI_PHY_T_WAKEUP_CFG0 0x1f4
+
+static const struct {
+ u32 code;
+ u8 bpp;
+} csiphy_formats[] = {
+ {
+ MEDIA_BUS_FMT_UYVY8_2X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_VYUY8_2X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_YUYV8_2X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_YVYU8_2X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR8_1X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG8_1X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG8_1X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB8_1X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR10_1X10,
+ 10,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG10_1X10,
+ 10,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG10_1X10,
+ 10,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB10_1X10,
+ 10,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR12_1X12,
+ 12,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG12_1X12,
+ 12,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG12_1X12,
+ 12,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB12_1X12,
+ 12,
+ }
+};
+
+/*
+ * csiphy_get_bpp - map media bus format to bits per pixel
+ * @code: media bus format code
+ *
+ * Return number of bits per pixel
+ */
+static u8 csiphy_get_bpp(u32 code)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(csiphy_formats); i++)
+ if (code == csiphy_formats[i].code)
+ return csiphy_formats[i].bpp;
+
+ WARN(1, "Unknown format\n");
+
+ return csiphy_formats[0].bpp;
+}
+
+/*
+ * csiphy_isr - CSIPHY module interrupt handler
+ * @irq: Interrupt line
+ * @dev: CSIPHY device
+ *
+ * Return IRQ_HANDLED on success
+ */
+static irqreturn_t csiphy_isr(int irq, void *dev)
+{
+ struct csiphy_device *csiphy = dev;
+ u8 i;
+
+ for (i = 0; i < 8; i++) {
+ u8 val = readl_relaxed(csiphy->base +
+ CAMSS_CSI_PHY_INTERRUPT_STATUSn(i));
+ writel_relaxed(val, csiphy->base +
+ CAMSS_CSI_PHY_INTERRUPT_CLEARn(i));
+ writel_relaxed(0x1, csiphy->base + CAMSS_CSI_PHY_GLBL_IRQ_CMD);
+ writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_IRQ_CMD);
+ writel_relaxed(0x0, csiphy->base +
+ CAMSS_CSI_PHY_INTERRUPT_CLEARn(i));
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * csiphy_set_clock_rates - Calculate and set clock rates on CSIPHY module
+ * @csiphy: CSIPHY device
+ */
+static int csiphy_set_clock_rates(struct csiphy_device *csiphy)
+{
+ struct device *dev = to_device_index(csiphy, csiphy->id);
+ u32 pixel_clock;
+ int i, j;
+ int ret;
+
+ ret = camss_get_pixel_clock(&csiphy->subdev.entity, &pixel_clock);
+ if (ret)
+ pixel_clock = 0;
+
+ for (i = 0; i < csiphy->nclocks; i++) {
+ struct camss_clock *clock = &csiphy->clock[i];
+
+ if (!strcmp(clock->name, "csiphy0_timer") ||
+ !strcmp(clock->name, "csiphy1_timer")) {
+ u8 bpp = csiphy_get_bpp(
+ csiphy->fmt[MSM_CSIPHY_PAD_SINK].code);
+ u8 num_lanes = csiphy->cfg.csi2->lane_cfg.num_data;
+ u64 min_rate = pixel_clock * bpp / (2 * num_lanes * 4);
+ long round_rate;
+
+ camss_add_clock_margin(&min_rate);
+
+ for (j = 0; j < clock->nfreqs; j++)
+ if (min_rate < clock->freq[j])
+ break;
+
+ if (j == clock->nfreqs) {
+ dev_err(dev,
+ "Pixel clock is too high for CSIPHY\n");
+ return -EINVAL;
+ }
+
+ /* if sensor pixel clock is not available */
+ /* set highest possible CSIPHY clock rate */
+ if (min_rate == 0)
+ j = clock->nfreqs - 1;
+
+ round_rate = clk_round_rate(clock->clk, clock->freq[j]);
+ if (round_rate < 0) {
+ dev_err(dev, "clk round rate failed: %ld\n",
+ round_rate);
+ return -EINVAL;
+ }
+
+ csiphy->timer_clk_rate = round_rate;
+
+ ret = clk_set_rate(clock->clk, csiphy->timer_clk_rate);
+ if (ret < 0) {
+ dev_err(dev, "clk set rate failed: %d\n", ret);
+ return ret;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * csiphy_reset - Perform software reset on CSIPHY module
+ * @csiphy: CSIPHY device
+ */
+static void csiphy_reset(struct csiphy_device *csiphy)
+{
+ writel_relaxed(0x1, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET);
+ usleep_range(5000, 8000);
+ writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET);
+}
+
+/*
+ * csiphy_set_power - Power on/off CSIPHY module
+ * @sd: CSIPHY V4L2 subdevice
+ * @on: Requested power state
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csiphy_set_power(struct v4l2_subdev *sd, int on)
+{
+ struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
+ struct device *dev = to_device_index(csiphy, csiphy->id);
+
+ if (on) {
+ u8 hw_version;
+ int ret;
+
+ ret = csiphy_set_clock_rates(csiphy);
+ if (ret < 0)
+ return ret;
+
+ ret = camss_enable_clocks(csiphy->nclocks, csiphy->clock, dev);
+ if (ret < 0)
+ return ret;
+
+ enable_irq(csiphy->irq);
+
+ csiphy_reset(csiphy);
+
+ hw_version = readl_relaxed(csiphy->base +
+ CAMSS_CSI_PHY_HW_VERSION);
+ dev_dbg(dev, "CSIPHY HW Version = 0x%02x\n", hw_version);
+ } else {
+ disable_irq(csiphy->irq);
+
+ camss_disable_clocks(csiphy->nclocks, csiphy->clock);
+ }
+
+ return 0;
+}
+
+/*
+ * csiphy_get_lane_mask - Calculate CSI2 lane mask configuration parameter
+ * @lane_cfg - CSI2 lane configuration
+ *
+ * Return lane mask
+ */
+static u8 csiphy_get_lane_mask(struct csiphy_lanes_cfg *lane_cfg)
+{
+ u8 lane_mask;
+ int i;
+
+ lane_mask = 1 << lane_cfg->clk.pos;
+
+ for (i = 0; i < lane_cfg->num_data; i++)
+ lane_mask |= 1 << lane_cfg->data[i].pos;
+
+ return lane_mask;
+}
+
+/*
+ * csiphy_settle_cnt_calc - Calculate settle count value
+ * @csiphy: CSIPHY device
+ *
+ * Helper function to calculate settle count value. This is
+ * based on the CSI2 T_hs_settle parameter which in turn
+ * is calculated based on the CSI2 transmitter pixel clock
+ * frequency.
+ *
+ * Return settle count value or 0 if the CSI2 pixel clock
+ * frequency is not available
+ */
+static u8 csiphy_settle_cnt_calc(struct csiphy_device *csiphy)
+{
+ u8 bpp = csiphy_get_bpp(
+ csiphy->fmt[MSM_CSIPHY_PAD_SINK].code);
+ u8 num_lanes = csiphy->cfg.csi2->lane_cfg.num_data;
+ u32 pixel_clock; /* Hz */
+ u32 mipi_clock; /* Hz */
+ u32 ui; /* ps */
+ u32 timer_period; /* ps */
+ u32 t_hs_prepare_max; /* ps */
+ u32 t_hs_prepare_zero_min; /* ps */
+ u32 t_hs_settle; /* ps */
+ u8 settle_cnt;
+ int ret;
+
+ ret = camss_get_pixel_clock(&csiphy->subdev.entity, &pixel_clock);
+ if (ret) {
+ dev_err(to_device_index(csiphy, csiphy->id),
+ "Cannot get CSI2 transmitter's pixel clock\n");
+ return 0;
+ }
+ if (!pixel_clock) {
+ dev_err(to_device_index(csiphy, csiphy->id),
+ "Got pixel clock == 0, cannot continue\n");
+ return 0;
+ }
+
+ mipi_clock = pixel_clock * bpp / (2 * num_lanes);
+ ui = div_u64(1000000000000LL, mipi_clock);
+ ui /= 2;
+ t_hs_prepare_max = 85000 + 6 * ui;
+ t_hs_prepare_zero_min = 145000 + 10 * ui;
+ t_hs_settle = (t_hs_prepare_max + t_hs_prepare_zero_min) / 2;
+
+ timer_period = div_u64(1000000000000LL, csiphy->timer_clk_rate);
+ settle_cnt = t_hs_settle / timer_period;
+
+ return settle_cnt;
+}
+
+/*
+ * csiphy_stream_on - Enable streaming on CSIPHY module
+ * @csiphy: CSIPHY device
+ *
+ * Helper function to enable streaming on CSIPHY module.
+ * Main configuration of CSIPHY module is also done here.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csiphy_stream_on(struct csiphy_device *csiphy)
+{
+ struct csiphy_config *cfg = &csiphy->cfg;
+ u8 lane_mask = csiphy_get_lane_mask(&cfg->csi2->lane_cfg);
+ u8 settle_cnt;
+ u8 val;
+ int i = 0;
+
+ settle_cnt = csiphy_settle_cnt_calc(csiphy);
+ if (!settle_cnt)
+ return -EINVAL;
+
+ val = readl_relaxed(csiphy->base_clk_mux);
+ if (cfg->combo_mode && (lane_mask & 0x18) == 0x18) {
+ val &= ~0xf0;
+ val |= cfg->csid_id << 4;
+ } else {
+ val &= ~0xf;
+ val |= cfg->csid_id;
+ }
+ writel_relaxed(val, csiphy->base_clk_mux);
+
+ writel_relaxed(0x1, csiphy->base +
+ CAMSS_CSI_PHY_GLBL_T_INIT_CFG0);
+ writel_relaxed(0x1, csiphy->base +
+ CAMSS_CSI_PHY_T_WAKEUP_CFG0);
+
+ val = 0x1;
+ val |= lane_mask << 1;
+ writel_relaxed(val, csiphy->base + CAMSS_CSI_PHY_GLBL_PWR_CFG);
+
+ val = cfg->combo_mode << 4;
+ writel_relaxed(val, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET);
+
+ while (lane_mask) {
+ if (lane_mask & 0x1) {
+ writel_relaxed(0x10, csiphy->base +
+ CAMSS_CSI_PHY_LNn_CFG2(i));
+ writel_relaxed(settle_cnt, csiphy->base +
+ CAMSS_CSI_PHY_LNn_CFG3(i));
+ writel_relaxed(0x3f, csiphy->base +
+ CAMSS_CSI_PHY_INTERRUPT_MASKn(i));
+ writel_relaxed(0x3f, csiphy->base +
+ CAMSS_CSI_PHY_INTERRUPT_CLEARn(i));
+ }
+
+ lane_mask >>= 1;
+ i++;
+ }
+
+ return 0;
+}
+
+/*
+ * csiphy_stream_off - Disable streaming on CSIPHY module
+ * @csiphy: CSIPHY device
+ *
+ * Helper function to disable streaming on CSIPHY module
+ */
+static void csiphy_stream_off(struct csiphy_device *csiphy)
+{
+ u8 lane_mask = csiphy_get_lane_mask(&csiphy->cfg.csi2->lane_cfg);
+ int i = 0;
+
+ while (lane_mask) {
+ if (lane_mask & 0x1)
+ writel_relaxed(0x0, csiphy->base +
+ CAMSS_CSI_PHY_LNn_CFG2(i));
+
+ lane_mask >>= 1;
+ i++;
+ }
+
+ writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_PWR_CFG);
+}
+
+
+/*
+ * csiphy_set_stream - Enable/disable streaming on CSIPHY module
+ * @sd: CSIPHY V4L2 subdevice
+ * @enable: Requested streaming state
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csiphy_set_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
+ int ret = 0;
+
+ if (enable)
+ ret = csiphy_stream_on(csiphy);
+ else
+ csiphy_stream_off(csiphy);
+
+ return ret;
+}
+
+/*
+ * __csiphy_get_format - Get pointer to format structure
+ * @csiphy: CSIPHY device
+ * @cfg: V4L2 subdev pad configuration
+ * @pad: pad from which format is requested
+ * @which: TRY or ACTIVE format
+ *
+ * Return pointer to TRY or ACTIVE format structure
+ */
+static struct v4l2_mbus_framefmt *
+__csiphy_get_format(struct csiphy_device *csiphy,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad,
+ enum v4l2_subdev_format_whence which)
+{
+ if (which == V4L2_SUBDEV_FORMAT_TRY)
+ return v4l2_subdev_get_try_format(&csiphy->subdev, cfg, pad);
+
+ return &csiphy->fmt[pad];
+}
+
+/*
+ * csiphy_try_format - Handle try format by pad subdev method
+ * @csiphy: CSIPHY device
+ * @cfg: V4L2 subdev pad configuration
+ * @pad: pad on which format is requested
+ * @fmt: pointer to v4l2 format structure
+ * @which: wanted subdev format
+ */
+static void csiphy_try_format(struct csiphy_device *csiphy,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad,
+ struct v4l2_mbus_framefmt *fmt,
+ enum v4l2_subdev_format_whence which)
+{
+ unsigned int i;
+
+ switch (pad) {
+ case MSM_CSIPHY_PAD_SINK:
+ /* Set format on sink pad */
+
+ for (i = 0; i < ARRAY_SIZE(csiphy_formats); i++)
+ if (fmt->code == csiphy_formats[i].code)
+ break;
+
+ /* If not found, use UYVY as default */
+ if (i >= ARRAY_SIZE(csiphy_formats))
+ fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
+
+ fmt->width = clamp_t(u32, fmt->width, 1, 8191);
+ fmt->height = clamp_t(u32, fmt->height, 1, 8191);
+
+ fmt->field = V4L2_FIELD_NONE;
+ fmt->colorspace = V4L2_COLORSPACE_SRGB;
+
+ break;
+
+ case MSM_CSIPHY_PAD_SRC:
+ /* Set and return a format same as sink pad */
+
+ *fmt = *__csiphy_get_format(csiphy, cfg, MSM_CSID_PAD_SINK,
+ which);
+
+ break;
+ }
+}
+
+/*
+ * csiphy_enum_mbus_code - Handle pixel format enumeration
+ * @sd: CSIPHY V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @code: pointer to v4l2_subdev_mbus_code_enum structure
+ * return -EINVAL or zero on success
+ */
+static int csiphy_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ if (code->pad == MSM_CSIPHY_PAD_SINK) {
+ if (code->index >= ARRAY_SIZE(csiphy_formats))
+ return -EINVAL;
+
+ code->code = csiphy_formats[code->index].code;
+ } else {
+ if (code->index > 0)
+ return -EINVAL;
+
+ format = __csiphy_get_format(csiphy, cfg, MSM_CSIPHY_PAD_SINK,
+ code->which);
+
+ code->code = format->code;
+ }
+
+ return 0;
+}
+
+/*
+ * csiphy_enum_frame_size - Handle frame size enumeration
+ * @sd: CSIPHY V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @fse: pointer to v4l2_subdev_frame_size_enum structure
+ * return -EINVAL or zero on success
+ */
+static int csiphy_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt format;
+
+ if (fse->index != 0)
+ return -EINVAL;
+
+ format.code = fse->code;
+ format.width = 1;
+ format.height = 1;
+ csiphy_try_format(csiphy, cfg, fse->pad, &format, fse->which);
+ fse->min_width = format.width;
+ fse->min_height = format.height;
+
+ if (format.code != fse->code)
+ return -EINVAL;
+
+ format.code = fse->code;
+ format.width = -1;
+ format.height = -1;
+ csiphy_try_format(csiphy, cfg, fse->pad, &format, fse->which);
+ fse->max_width = format.width;
+ fse->max_height = format.height;
+
+ return 0;
+}
+
+/*
+ * csiphy_get_format - Handle get format by pads subdev method
+ * @sd: CSIPHY V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @fmt: pointer to v4l2 subdev format structure
+ *
+ * Return -EINVAL or zero on success
+ */
+static int csiphy_get_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ format = __csiphy_get_format(csiphy, cfg, fmt->pad, fmt->which);
+ if (format == NULL)
+ return -EINVAL;
+
+ fmt->format = *format;
+
+ return 0;
+}
+
+/*
+ * csiphy_set_format - Handle set format by pads subdev method
+ * @sd: CSIPHY V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @fmt: pointer to v4l2 subdev format structure
+ *
+ * Return -EINVAL or zero on success
+ */
+static int csiphy_set_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ format = __csiphy_get_format(csiphy, cfg, fmt->pad, fmt->which);
+ if (format == NULL)
+ return -EINVAL;
+
+ csiphy_try_format(csiphy, cfg, fmt->pad, &fmt->format, fmt->which);
+ *format = fmt->format;
+
+ /* Propagate the format from sink to source */
+ if (fmt->pad == MSM_CSIPHY_PAD_SINK) {
+ format = __csiphy_get_format(csiphy, cfg, MSM_CSIPHY_PAD_SRC,
+ fmt->which);
+
+ *format = fmt->format;
+ csiphy_try_format(csiphy, cfg, MSM_CSIPHY_PAD_SRC, format,
+ fmt->which);
+ }
+
+ return 0;
+}
+
+/*
+ * csiphy_init_formats - Initialize formats on all pads
+ * @sd: CSIPHY V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ *
+ * Initialize all pad formats with default values.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csiphy_init_formats(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_subdev_format format = {
+ .pad = MSM_CSIPHY_PAD_SINK,
+ .which = fh ? V4L2_SUBDEV_FORMAT_TRY :
+ V4L2_SUBDEV_FORMAT_ACTIVE,
+ .format = {
+ .code = MEDIA_BUS_FMT_UYVY8_2X8,
+ .width = 1920,
+ .height = 1080
+ }
+ };
+
+ return csiphy_set_format(sd, fh ? fh->pad : NULL, &format);
+}
+
+/*
+ * msm_csiphy_subdev_init - Initialize CSIPHY device structure and resources
+ * @csiphy: CSIPHY device
+ * @res: CSIPHY module resources table
+ * @id: CSIPHY module id
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int msm_csiphy_subdev_init(struct csiphy_device *csiphy,
+ const struct resources *res, u8 id)
+{
+ struct device *dev = to_device_index(csiphy, id);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *r;
+ int i, j;
+ int ret;
+
+ csiphy->id = id;
+ csiphy->cfg.combo_mode = 0;
+
+ /* Memory */
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[0]);
+ csiphy->base = devm_ioremap_resource(dev, r);
+ if (IS_ERR(csiphy->base)) {
+ dev_err(dev, "could not map memory\n");
+ return PTR_ERR(csiphy->base);
+ }
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[1]);
+ csiphy->base_clk_mux = devm_ioremap_resource(dev, r);
+ if (IS_ERR(csiphy->base_clk_mux)) {
+ dev_err(dev, "could not map memory\n");
+ return PTR_ERR(csiphy->base_clk_mux);
+ }
+
+ /* Interrupt */
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
+ res->interrupt[0]);
+ if (!r) {
+ dev_err(dev, "missing IRQ\n");
+ return -EINVAL;
+ }
+
+ csiphy->irq = r->start;
+ snprintf(csiphy->irq_name, sizeof(csiphy->irq_name), "%s_%s%d",
+ dev_name(dev), MSM_CSIPHY_NAME, csiphy->id);
+ ret = devm_request_irq(dev, csiphy->irq, csiphy_isr,
+ IRQF_TRIGGER_RISING, csiphy->irq_name, csiphy);
+ if (ret < 0) {
+ dev_err(dev, "request_irq failed: %d\n", ret);
+ return ret;
+ }
+
+ disable_irq(csiphy->irq);
+
+ /* Clocks */
+
+ csiphy->nclocks = 0;
+ while (res->clock[csiphy->nclocks])
+ csiphy->nclocks++;
+
+ csiphy->clock = devm_kcalloc(dev,
+ csiphy->nclocks, sizeof(*csiphy->clock),
+ GFP_KERNEL);
+ if (!csiphy->clock)
+ return -ENOMEM;
+
+ for (i = 0; i < csiphy->nclocks; i++) {
+ struct camss_clock *clock = &csiphy->clock[i];
+
+ clock->clk = devm_clk_get(dev, res->clock[i]);
+ if (IS_ERR(clock->clk))
+ return PTR_ERR(clock->clk);
+
+ clock->name = res->clock[i];
+
+ clock->nfreqs = 0;
+ while (res->clock_rate[i][clock->nfreqs])
+ clock->nfreqs++;
+
+ if (!clock->nfreqs) {
+ clock->freq = NULL;
+ continue;
+ }
+
+ clock->freq = devm_kcalloc(dev,
+ clock->nfreqs,
+ sizeof(*clock->freq),
+ GFP_KERNEL);
+ if (!clock->freq)
+ return -ENOMEM;
+
+ for (j = 0; j < clock->nfreqs; j++)
+ clock->freq[j] = res->clock_rate[i][j];
+ }
+
+ return 0;
+}
+
+/*
+ * csiphy_link_setup - Setup CSIPHY connections
+ * @entity: Pointer to media entity structure
+ * @local: Pointer to local pad
+ * @remote: Pointer to remote pad
+ * @flags: Link flags
+ *
+ * Rreturn 0 on success
+ */
+static int csiphy_link_setup(struct media_entity *entity,
+ const struct media_pad *local,
+ const struct media_pad *remote, u32 flags)
+{
+ if ((local->flags & MEDIA_PAD_FL_SOURCE) &&
+ (flags & MEDIA_LNK_FL_ENABLED)) {
+ struct v4l2_subdev *sd;
+ struct csiphy_device *csiphy;
+ struct csid_device *csid;
+
+ if (media_entity_remote_pad(local))
+ return -EBUSY;
+
+ sd = media_entity_to_v4l2_subdev(entity);
+ csiphy = v4l2_get_subdevdata(sd);
+
+ sd = media_entity_to_v4l2_subdev(remote->entity);
+ csid = v4l2_get_subdevdata(sd);
+
+ csiphy->cfg.csid_id = csid->id;
+ }
+
+ return 0;
+}
+
+static const struct v4l2_subdev_core_ops csiphy_core_ops = {
+ .s_power = csiphy_set_power,
+};
+
+static const struct v4l2_subdev_video_ops csiphy_video_ops = {
+ .s_stream = csiphy_set_stream,
+};
+
+static const struct v4l2_subdev_pad_ops csiphy_pad_ops = {
+ .enum_mbus_code = csiphy_enum_mbus_code,
+ .enum_frame_size = csiphy_enum_frame_size,
+ .get_fmt = csiphy_get_format,
+ .set_fmt = csiphy_set_format,
+};
+
+static const struct v4l2_subdev_ops csiphy_v4l2_ops = {
+ .core = &csiphy_core_ops,
+ .video = &csiphy_video_ops,
+ .pad = &csiphy_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops csiphy_v4l2_internal_ops = {
+ .open = csiphy_init_formats,
+};
+
+static const struct media_entity_operations csiphy_media_ops = {
+ .link_setup = csiphy_link_setup,
+ .link_validate = v4l2_subdev_link_validate,
+};
+
+/*
+ * msm_csiphy_register_entity - Register subdev node for CSIPHY module
+ * @csiphy: CSIPHY device
+ * @v4l2_dev: V4L2 device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int msm_csiphy_register_entity(struct csiphy_device *csiphy,
+ struct v4l2_device *v4l2_dev)
+{
+ struct v4l2_subdev *sd = &csiphy->subdev;
+ struct media_pad *pads = csiphy->pads;
+ struct device *dev = to_device_index(csiphy, csiphy->id);
+ int ret;
+
+ v4l2_subdev_init(sd, &csiphy_v4l2_ops);
+ sd->internal_ops = &csiphy_v4l2_internal_ops;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d",
+ MSM_CSIPHY_NAME, csiphy->id);
+ v4l2_set_subdevdata(sd, csiphy);
+
+ ret = csiphy_init_formats(sd, NULL);
+ if (ret < 0) {
+ dev_err(dev, "Failed to init format: %d\n", ret);
+ return ret;
+ }
+
+ pads[MSM_CSIPHY_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+ pads[MSM_CSIPHY_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
+
+ sd->entity.function = MEDIA_ENT_F_IO_V4L;
+ sd->entity.ops = &csiphy_media_ops;
+ ret = media_entity_pads_init(&sd->entity, MSM_CSIPHY_PADS_NUM, pads);
+ if (ret < 0) {
+ dev_err(dev, "Failed to init media entity: %d\n", ret);
+ return ret;
+ }
+
+ ret = v4l2_device_register_subdev(v4l2_dev, sd);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register subdev: %d\n", ret);
+ media_entity_cleanup(&sd->entity);
+ }
+
+ return ret;
+}
+
+/*
+ * msm_csiphy_unregister_entity - Unregister CSIPHY module subdev node
+ * @csiphy: CSIPHY device
+ */
+void msm_csiphy_unregister_entity(struct csiphy_device *csiphy)
+{
+ v4l2_device_unregister_subdev(&csiphy->subdev);
+ media_entity_cleanup(&csiphy->subdev.entity);
+}
new file mode 100644
@@ -0,0 +1,77 @@
+/*
+ * camss-csiphy.h
+ *
+ * Qualcomm MSM Camera Subsystem - CSIPHY Module
+ *
+ * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2016-2018 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef QC_MSM_CAMSS_CSIPHY_H
+#define QC_MSM_CAMSS_CSIPHY_H
+
+#include <linux/clk.h>
+#include <media/media-entity.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-mediabus.h>
+#include <media/v4l2-subdev.h>
+
+#define MSM_CSIPHY_PAD_SINK 0
+#define MSM_CSIPHY_PAD_SRC 1
+#define MSM_CSIPHY_PADS_NUM 2
+
+struct csiphy_lane {
+ u8 pos;
+ u8 pol;
+};
+
+struct csiphy_lanes_cfg {
+ int num_data;
+ struct csiphy_lane *data;
+ struct csiphy_lane clk;
+};
+
+struct csiphy_csi2_cfg {
+ struct csiphy_lanes_cfg lane_cfg;
+};
+
+struct csiphy_config {
+ u8 combo_mode;
+ u8 csid_id;
+ struct csiphy_csi2_cfg *csi2;
+};
+
+struct csiphy_device {
+ u8 id;
+ struct v4l2_subdev subdev;
+ struct media_pad pads[MSM_CSIPHY_PADS_NUM];
+ void __iomem *base;
+ void __iomem *base_clk_mux;
+ u32 irq;
+ char irq_name[30];
+ struct camss_clock *clock;
+ int nclocks;
+ u32 timer_clk_rate;
+ struct csiphy_config cfg;
+ struct v4l2_mbus_framefmt fmt[MSM_CSIPHY_PADS_NUM];
+};
+
+struct resources;
+
+int msm_csiphy_subdev_init(struct csiphy_device *csiphy,
+ const struct resources *res, u8 id);
+
+int msm_csiphy_register_entity(struct csiphy_device *csiphy,
+ struct v4l2_device *v4l2_dev);
+
+void msm_csiphy_unregister_entity(struct csiphy_device *csiphy);
+
+#endif /* QC_MSM_CAMSS_CSIPHY_H */
new file mode 100644
@@ -0,0 +1,1178 @@
+/*
+ * camss-ispif.c
+ *
+ * Qualcomm MSM Camera Subsystem - ISPIF (ISP Interface) Module
+ *
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015-2018 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <media/media-entity.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+#include "camss-ispif.h"
+#include "camss.h"
+
+#define MSM_ISPIF_NAME "msm_ispif"
+
+#define ispif_line_array(ptr_line) \
+ ((const struct ispif_line (*)[]) &(ptr_line[-(ptr_line->id)]))
+
+#define to_ispif(ptr_line) \
+ container_of(ispif_line_array(ptr_line), struct ispif_device, ptr_line)
+
+#define ISPIF_RST_CMD_0 0x008
+#define ISPIF_RST_CMD_0_STROBED_RST_EN (1 << 0)
+#define ISPIF_RST_CMD_0_MISC_LOGIC_RST (1 << 1)
+#define ISPIF_RST_CMD_0_SW_REG_RST (1 << 2)
+#define ISPIF_RST_CMD_0_PIX_INTF_0_CSID_RST (1 << 3)
+#define ISPIF_RST_CMD_0_PIX_INTF_0_VFE_RST (1 << 4)
+#define ISPIF_RST_CMD_0_PIX_INTF_1_CSID_RST (1 << 5)
+#define ISPIF_RST_CMD_0_PIX_INTF_1_VFE_RST (1 << 6)
+#define ISPIF_RST_CMD_0_RDI_INTF_0_CSID_RST (1 << 7)
+#define ISPIF_RST_CMD_0_RDI_INTF_0_VFE_RST (1 << 8)
+#define ISPIF_RST_CMD_0_RDI_INTF_1_CSID_RST (1 << 9)
+#define ISPIF_RST_CMD_0_RDI_INTF_1_VFE_RST (1 << 10)
+#define ISPIF_RST_CMD_0_RDI_INTF_2_CSID_RST (1 << 11)
+#define ISPIF_RST_CMD_0_RDI_INTF_2_VFE_RST (1 << 12)
+#define ISPIF_RST_CMD_0_PIX_OUTPUT_0_MISR_RST (1 << 16)
+#define ISPIF_RST_CMD_0_RDI_OUTPUT_0_MISR_RST (1 << 17)
+#define ISPIF_RST_CMD_0_RDI_OUTPUT_1_MISR_RST (1 << 18)
+#define ISPIF_RST_CMD_0_RDI_OUTPUT_2_MISR_RST (1 << 19)
+#define ISPIF_IRQ_GLOBAL_CLEAR_CMD 0x01c
+#define ISPIF_VFE_m_CTRL_0(m) (0x200 + 0x200 * (m))
+#define ISPIF_VFE_m_CTRL_0_PIX0_LINE_BUF_EN (1 << 6)
+#define ISPIF_VFE_m_IRQ_MASK_0(m) (0x208 + 0x200 * (m))
+#define ISPIF_VFE_m_IRQ_MASK_0_PIX0_ENABLE 0x00001249
+#define ISPIF_VFE_m_IRQ_MASK_0_PIX0_MASK 0x00001fff
+#define ISPIF_VFE_m_IRQ_MASK_0_RDI0_ENABLE 0x02492000
+#define ISPIF_VFE_m_IRQ_MASK_0_RDI0_MASK 0x03ffe000
+#define ISPIF_VFE_m_IRQ_MASK_1(m) (0x20c + 0x200 * (m))
+#define ISPIF_VFE_m_IRQ_MASK_1_PIX1_ENABLE 0x00001249
+#define ISPIF_VFE_m_IRQ_MASK_1_PIX1_MASK 0x00001fff
+#define ISPIF_VFE_m_IRQ_MASK_1_RDI1_ENABLE 0x02492000
+#define ISPIF_VFE_m_IRQ_MASK_1_RDI1_MASK 0x03ffe000
+#define ISPIF_VFE_m_IRQ_MASK_2(m) (0x210 + 0x200 * (m))
+#define ISPIF_VFE_m_IRQ_MASK_2_RDI2_ENABLE 0x00001249
+#define ISPIF_VFE_m_IRQ_MASK_2_RDI2_MASK 0x00001fff
+#define ISPIF_VFE_m_IRQ_STATUS_0(m) (0x21c + 0x200 * (m))
+#define ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW (1 << 12)
+#define ISPIF_VFE_m_IRQ_STATUS_0_RDI0_OVERFLOW (1 << 25)
+#define ISPIF_VFE_m_IRQ_STATUS_1(m) (0x220 + 0x200 * (m))
+#define ISPIF_VFE_m_IRQ_STATUS_1_PIX1_OVERFLOW (1 << 12)
+#define ISPIF_VFE_m_IRQ_STATUS_1_RDI1_OVERFLOW (1 << 25)
+#define ISPIF_VFE_m_IRQ_STATUS_2(m) (0x224 + 0x200 * (m))
+#define ISPIF_VFE_m_IRQ_STATUS_2_RDI2_OVERFLOW (1 << 12)
+#define ISPIF_VFE_m_IRQ_CLEAR_0(m) (0x230 + 0x200 * (m))
+#define ISPIF_VFE_m_IRQ_CLEAR_1(m) (0x234 + 0x200 * (m))
+#define ISPIF_VFE_m_IRQ_CLEAR_2(m) (0x238 + 0x200 * (m))
+#define ISPIF_VFE_m_INTF_INPUT_SEL(m) (0x244 + 0x200 * (m))
+#define ISPIF_VFE_m_INTF_CMD_0(m) (0x248 + 0x200 * (m))
+#define ISPIF_VFE_m_INTF_CMD_1(m) (0x24c + 0x200 * (m))
+#define ISPIF_VFE_m_PIX_INTF_n_CID_MASK(m, n) \
+ (0x254 + 0x200 * (m) + 0x4 * (n))
+#define ISPIF_VFE_m_RDI_INTF_n_CID_MASK(m, n) \
+ (0x264 + 0x200 * (m) + 0x4 * (n))
+#define ISPIF_VFE_m_PIX_INTF_n_STATUS(m, n) \
+ (0x2c0 + 0x200 * (m) + 0x4 * (n))
+#define ISPIF_VFE_m_RDI_INTF_n_STATUS(m, n) \
+ (0x2d0 + 0x200 * (m) + 0x4 * (n))
+
+#define CSI_PIX_CLK_MUX_SEL 0x000
+#define CSI_RDI_CLK_MUX_SEL 0x008
+
+#define ISPIF_TIMEOUT_SLEEP_US 1000
+#define ISPIF_TIMEOUT_ALL_US 1000000
+#define ISPIF_RESET_TIMEOUT_MS 500
+
+enum ispif_intf_cmd {
+ CMD_DISABLE_FRAME_BOUNDARY = 0x0,
+ CMD_ENABLE_FRAME_BOUNDARY = 0x1,
+ CMD_DISABLE_IMMEDIATELY = 0x2,
+ CMD_ALL_DISABLE_IMMEDIATELY = 0xaaaaaaaa,
+ CMD_ALL_NO_CHANGE = 0xffffffff,
+};
+
+static const u32 ispif_formats[] = {
+ MEDIA_BUS_FMT_UYVY8_2X8,
+ MEDIA_BUS_FMT_VYUY8_2X8,
+ MEDIA_BUS_FMT_YUYV8_2X8,
+ MEDIA_BUS_FMT_YVYU8_2X8,
+ MEDIA_BUS_FMT_SBGGR8_1X8,
+ MEDIA_BUS_FMT_SGBRG8_1X8,
+ MEDIA_BUS_FMT_SGRBG8_1X8,
+ MEDIA_BUS_FMT_SRGGB8_1X8,
+ MEDIA_BUS_FMT_SBGGR10_1X10,
+ MEDIA_BUS_FMT_SGBRG10_1X10,
+ MEDIA_BUS_FMT_SGRBG10_1X10,
+ MEDIA_BUS_FMT_SRGGB10_1X10,
+ MEDIA_BUS_FMT_SBGGR12_1X12,
+ MEDIA_BUS_FMT_SGBRG12_1X12,
+ MEDIA_BUS_FMT_SGRBG12_1X12,
+ MEDIA_BUS_FMT_SRGGB12_1X12,
+};
+
+/*
+ * ispif_isr - ISPIF module interrupt handler
+ * @irq: Interrupt line
+ * @dev: ISPIF device
+ *
+ * Return IRQ_HANDLED on success
+ */
+static irqreturn_t ispif_isr(int irq, void *dev)
+{
+ struct ispif_device *ispif = dev;
+ u32 value0, value1, value2;
+
+ value0 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_0(0));
+ value1 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_1(0));
+ value2 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_2(0));
+
+ writel_relaxed(value0, ispif->base + ISPIF_VFE_m_IRQ_CLEAR_0(0));
+ writel_relaxed(value1, ispif->base + ISPIF_VFE_m_IRQ_CLEAR_1(0));
+ writel_relaxed(value2, ispif->base + ISPIF_VFE_m_IRQ_CLEAR_2(0));
+
+ writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
+
+ if ((value0 >> 27) & 0x1)
+ complete(&ispif->reset_complete);
+
+ if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
+ dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
+
+ if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_RDI0_OVERFLOW))
+ dev_err_ratelimited(to_device(ispif), "VFE0 rdi0 overflow\n");
+
+ if (unlikely(value1 & ISPIF_VFE_m_IRQ_STATUS_1_PIX1_OVERFLOW))
+ dev_err_ratelimited(to_device(ispif), "VFE0 pix1 overflow\n");
+
+ if (unlikely(value1 & ISPIF_VFE_m_IRQ_STATUS_1_RDI1_OVERFLOW))
+ dev_err_ratelimited(to_device(ispif), "VFE0 rdi1 overflow\n");
+
+ if (unlikely(value2 & ISPIF_VFE_m_IRQ_STATUS_2_RDI2_OVERFLOW))
+ dev_err_ratelimited(to_device(ispif), "VFE0 rdi2 overflow\n");
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * ispif_reset - Trigger reset on ISPIF module and wait to complete
+ * @ispif: ISPIF device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int ispif_reset(struct ispif_device *ispif)
+{
+ unsigned long time;
+ u32 val;
+ int ret;
+
+ ret = camss_enable_clocks(ispif->nclocks_for_reset,
+ ispif->clock_for_reset,
+ to_device(ispif));
+ if (ret < 0)
+ return ret;
+
+ reinit_completion(&ispif->reset_complete);
+
+ val = ISPIF_RST_CMD_0_STROBED_RST_EN |
+ ISPIF_RST_CMD_0_MISC_LOGIC_RST |
+ ISPIF_RST_CMD_0_SW_REG_RST |
+ ISPIF_RST_CMD_0_PIX_INTF_0_CSID_RST |
+ ISPIF_RST_CMD_0_PIX_INTF_0_VFE_RST |
+ ISPIF_RST_CMD_0_PIX_INTF_1_CSID_RST |
+ ISPIF_RST_CMD_0_PIX_INTF_1_VFE_RST |
+ ISPIF_RST_CMD_0_RDI_INTF_0_CSID_RST |
+ ISPIF_RST_CMD_0_RDI_INTF_0_VFE_RST |
+ ISPIF_RST_CMD_0_RDI_INTF_1_CSID_RST |
+ ISPIF_RST_CMD_0_RDI_INTF_1_VFE_RST |
+ ISPIF_RST_CMD_0_RDI_INTF_2_CSID_RST |
+ ISPIF_RST_CMD_0_RDI_INTF_2_VFE_RST |
+ ISPIF_RST_CMD_0_PIX_OUTPUT_0_MISR_RST |
+ ISPIF_RST_CMD_0_RDI_OUTPUT_0_MISR_RST |
+ ISPIF_RST_CMD_0_RDI_OUTPUT_1_MISR_RST |
+ ISPIF_RST_CMD_0_RDI_OUTPUT_2_MISR_RST;
+
+ writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
+
+ time = wait_for_completion_timeout(&ispif->reset_complete,
+ msecs_to_jiffies(ISPIF_RESET_TIMEOUT_MS));
+ if (!time) {
+ dev_err(to_device(ispif), "ISPIF reset timeout\n");
+ return -EIO;
+ }
+
+ camss_disable_clocks(ispif->nclocks_for_reset, ispif->clock_for_reset);
+
+ return 0;
+}
+
+/*
+ * ispif_set_power - Power on/off ISPIF module
+ * @sd: ISPIF V4L2 subdevice
+ * @on: Requested power state
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int ispif_set_power(struct v4l2_subdev *sd, int on)
+{
+ struct ispif_line *line = v4l2_get_subdevdata(sd);
+ struct ispif_device *ispif = to_ispif(line);
+ struct device *dev = to_device(ispif);
+ int ret = 0;
+
+ mutex_lock(&ispif->power_lock);
+
+ if (on) {
+ if (ispif->power_count) {
+ /* Power is already on */
+ ispif->power_count++;
+ goto exit;
+ }
+
+ ret = camss_enable_clocks(ispif->nclocks, ispif->clock, dev);
+ if (ret < 0)
+ goto exit;
+
+ ret = ispif_reset(ispif);
+ if (ret < 0) {
+ camss_disable_clocks(ispif->nclocks, ispif->clock);
+ goto exit;
+ }
+
+ ispif->intf_cmd[line->vfe_id].cmd_0 = CMD_ALL_NO_CHANGE;
+ ispif->intf_cmd[line->vfe_id].cmd_1 = CMD_ALL_NO_CHANGE;
+
+ ispif->power_count++;
+ } else {
+ if (ispif->power_count == 0) {
+ dev_err(dev, "ispif power off on power_count == 0\n");
+ goto exit;
+ } else if (ispif->power_count == 1) {
+ camss_disable_clocks(ispif->nclocks, ispif->clock);
+ }
+
+ ispif->power_count--;
+ }
+
+exit:
+ mutex_unlock(&ispif->power_lock);
+
+ return ret;
+}
+
+/*
+ * ispif_select_clk_mux - Select clock for PIX/RDI interface
+ * @ispif: ISPIF device
+ * @intf: VFE interface
+ * @csid: CSID HW module id
+ * @vfe: VFE HW module id
+ * @enable: enable or disable the selected clock
+ */
+static void ispif_select_clk_mux(struct ispif_device *ispif,
+ enum ispif_intf intf, u8 csid,
+ u8 vfe, u8 enable)
+{
+ u32 val;
+
+ switch (intf) {
+ case PIX0:
+ val = readl_relaxed(ispif->base_clk_mux + CSI_PIX_CLK_MUX_SEL);
+ val &= ~(0xf << (vfe * 8));
+ if (enable)
+ val |= (csid << (vfe * 8));
+ writel_relaxed(val, ispif->base_clk_mux + CSI_PIX_CLK_MUX_SEL);
+ break;
+
+ case RDI0:
+ val = readl_relaxed(ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
+ val &= ~(0xf << (vfe * 12));
+ if (enable)
+ val |= (csid << (vfe * 12));
+ writel_relaxed(val, ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
+ break;
+
+ case PIX1:
+ val = readl_relaxed(ispif->base_clk_mux + CSI_PIX_CLK_MUX_SEL);
+ val &= ~(0xf << (4 + (vfe * 8)));
+ if (enable)
+ val |= (csid << (4 + (vfe * 8)));
+ writel_relaxed(val, ispif->base_clk_mux + CSI_PIX_CLK_MUX_SEL);
+ break;
+
+ case RDI1:
+ val = readl_relaxed(ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
+ val &= ~(0xf << (4 + (vfe * 12)));
+ if (enable)
+ val |= (csid << (4 + (vfe * 12)));
+ writel_relaxed(val, ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
+ break;
+
+ case RDI2:
+ val = readl_relaxed(ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
+ val &= ~(0xf << (8 + (vfe * 12)));
+ if (enable)
+ val |= (csid << (8 + (vfe * 12)));
+ writel_relaxed(val, ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
+ break;
+ }
+
+ mb();
+}
+
+/*
+ * ispif_validate_intf_status - Validate current status of PIX/RDI interface
+ * @ispif: ISPIF device
+ * @intf: VFE interface
+ * @vfe: VFE HW module id
+ *
+ * Return 0 when interface is idle or -EBUSY otherwise
+ */
+static int ispif_validate_intf_status(struct ispif_device *ispif,
+ enum ispif_intf intf, u8 vfe)
+{
+ int ret = 0;
+ u32 val = 0;
+
+ switch (intf) {
+ case PIX0:
+ val = readl_relaxed(ispif->base +
+ ISPIF_VFE_m_PIX_INTF_n_STATUS(vfe, 0));
+ break;
+ case RDI0:
+ val = readl_relaxed(ispif->base +
+ ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 0));
+ break;
+ case PIX1:
+ val = readl_relaxed(ispif->base +
+ ISPIF_VFE_m_PIX_INTF_n_STATUS(vfe, 1));
+ break;
+ case RDI1:
+ val = readl_relaxed(ispif->base +
+ ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 1));
+ break;
+ case RDI2:
+ val = readl_relaxed(ispif->base +
+ ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 2));
+ break;
+ }
+
+ if ((val & 0xf) != 0xf) {
+ dev_err(to_device(ispif), "%s: ispif is busy: 0x%x\n",
+ __func__, val);
+ ret = -EBUSY;
+ }
+
+ return ret;
+}
+
+/*
+ * ispif_wait_for_stop - Wait for PIX/RDI interface to stop
+ * @ispif: ISPIF device
+ * @intf: VFE interface
+ * @vfe: VFE HW module id
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int ispif_wait_for_stop(struct ispif_device *ispif,
+ enum ispif_intf intf, u8 vfe)
+{
+ u32 addr = 0;
+ u32 stop_flag = 0;
+ int ret;
+
+ switch (intf) {
+ case PIX0:
+ addr = ISPIF_VFE_m_PIX_INTF_n_STATUS(vfe, 0);
+ break;
+ case RDI0:
+ addr = ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 0);
+ break;
+ case PIX1:
+ addr = ISPIF_VFE_m_PIX_INTF_n_STATUS(vfe, 1);
+ break;
+ case RDI1:
+ addr = ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 1);
+ break;
+ case RDI2:
+ addr = ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 2);
+ break;
+ }
+
+ ret = readl_poll_timeout(ispif->base + addr,
+ stop_flag,
+ (stop_flag & 0xf) == 0xf,
+ ISPIF_TIMEOUT_SLEEP_US,
+ ISPIF_TIMEOUT_ALL_US);
+ if (ret < 0)
+ dev_err(to_device(ispif), "%s: ispif stop timeout\n",
+ __func__);
+
+ return ret;
+}
+
+/*
+ * ispif_select_csid - Select CSID HW module for input from
+ * @ispif: ISPIF device
+ * @intf: VFE interface
+ * @csid: CSID HW module id
+ * @vfe: VFE HW module id
+ * @enable: enable or disable the selected input
+ */
+static void ispif_select_csid(struct ispif_device *ispif, enum ispif_intf intf,
+ u8 csid, u8 vfe, u8 enable)
+{
+ u32 val;
+
+ val = readl_relaxed(ispif->base + ISPIF_VFE_m_INTF_INPUT_SEL(vfe));
+ switch (intf) {
+ case PIX0:
+ val &= ~(BIT(1) | BIT(0));
+ if (enable)
+ val |= csid;
+ break;
+ case RDI0:
+ val &= ~(BIT(5) | BIT(4));
+ if (enable)
+ val |= (csid << 4);
+ break;
+ case PIX1:
+ val &= ~(BIT(9) | BIT(8));
+ if (enable)
+ val |= (csid << 8);
+ break;
+ case RDI1:
+ val &= ~(BIT(13) | BIT(12));
+ if (enable)
+ val |= (csid << 12);
+ break;
+ case RDI2:
+ val &= ~(BIT(21) | BIT(20));
+ if (enable)
+ val |= (csid << 20);
+ break;
+ }
+
+ writel(val, ispif->base + ISPIF_VFE_m_INTF_INPUT_SEL(vfe));
+}
+
+/*
+ * ispif_select_cid - Enable/disable desired CID
+ * @ispif: ISPIF device
+ * @intf: VFE interface
+ * @cid: desired CID to enable/disable
+ * @vfe: VFE HW module id
+ * @enable: enable or disable the desired CID
+ */
+static void ispif_select_cid(struct ispif_device *ispif, enum ispif_intf intf,
+ u8 cid, u8 vfe, u8 enable)
+{
+ u32 cid_mask = 1 << cid;
+ u32 addr = 0;
+ u32 val;
+
+ switch (intf) {
+ case PIX0:
+ addr = ISPIF_VFE_m_PIX_INTF_n_CID_MASK(vfe, 0);
+ break;
+ case RDI0:
+ addr = ISPIF_VFE_m_RDI_INTF_n_CID_MASK(vfe, 0);
+ break;
+ case PIX1:
+ addr = ISPIF_VFE_m_PIX_INTF_n_CID_MASK(vfe, 1);
+ break;
+ case RDI1:
+ addr = ISPIF_VFE_m_RDI_INTF_n_CID_MASK(vfe, 1);
+ break;
+ case RDI2:
+ addr = ISPIF_VFE_m_RDI_INTF_n_CID_MASK(vfe, 2);
+ break;
+ }
+
+ val = readl_relaxed(ispif->base + addr);
+ if (enable)
+ val |= cid_mask;
+ else
+ val &= ~cid_mask;
+
+ writel(val, ispif->base + addr);
+}
+
+/*
+ * ispif_config_irq - Enable/disable interrupts for PIX/RDI interface
+ * @ispif: ISPIF device
+ * @intf: VFE interface
+ * @vfe: VFE HW module id
+ * @enable: enable or disable
+ */
+static void ispif_config_irq(struct ispif_device *ispif, enum ispif_intf intf,
+ u8 vfe, u8 enable)
+{
+ u32 val;
+
+ switch (intf) {
+ case PIX0:
+ val = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_MASK_0(vfe));
+ val &= ~ISPIF_VFE_m_IRQ_MASK_0_PIX0_MASK;
+ if (enable)
+ val |= ISPIF_VFE_m_IRQ_MASK_0_PIX0_ENABLE;
+ writel_relaxed(val, ispif->base + ISPIF_VFE_m_IRQ_MASK_0(vfe));
+ writel_relaxed(ISPIF_VFE_m_IRQ_MASK_0_PIX0_ENABLE,
+ ispif->base + ISPIF_VFE_m_IRQ_CLEAR_0(vfe));
+ break;
+ case RDI0:
+ val = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_MASK_0(vfe));
+ val &= ~ISPIF_VFE_m_IRQ_MASK_0_RDI0_MASK;
+ if (enable)
+ val |= ISPIF_VFE_m_IRQ_MASK_0_RDI0_ENABLE;
+ writel_relaxed(val, ispif->base + ISPIF_VFE_m_IRQ_MASK_0(vfe));
+ writel_relaxed(ISPIF_VFE_m_IRQ_MASK_0_RDI0_ENABLE,
+ ispif->base + ISPIF_VFE_m_IRQ_CLEAR_0(vfe));
+ break;
+ case PIX1:
+ val = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_MASK_1(vfe));
+ val &= ~ISPIF_VFE_m_IRQ_MASK_1_PIX1_MASK;
+ if (enable)
+ val |= ISPIF_VFE_m_IRQ_MASK_1_PIX1_ENABLE;
+ writel_relaxed(val, ispif->base + ISPIF_VFE_m_IRQ_MASK_1(vfe));
+ writel_relaxed(ISPIF_VFE_m_IRQ_MASK_1_PIX1_ENABLE,
+ ispif->base + ISPIF_VFE_m_IRQ_CLEAR_1(vfe));
+ break;
+ case RDI1:
+ val = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_MASK_1(vfe));
+ val &= ~ISPIF_VFE_m_IRQ_MASK_1_RDI1_MASK;
+ if (enable)
+ val |= ISPIF_VFE_m_IRQ_MASK_1_RDI1_ENABLE;
+ writel_relaxed(val, ispif->base + ISPIF_VFE_m_IRQ_MASK_1(vfe));
+ writel_relaxed(ISPIF_VFE_m_IRQ_MASK_1_RDI1_ENABLE,
+ ispif->base + ISPIF_VFE_m_IRQ_CLEAR_1(vfe));
+ break;
+ case RDI2:
+ val = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_MASK_2(vfe));
+ val &= ~ISPIF_VFE_m_IRQ_MASK_2_RDI2_MASK;
+ if (enable)
+ val |= ISPIF_VFE_m_IRQ_MASK_2_RDI2_ENABLE;
+ writel_relaxed(val, ispif->base + ISPIF_VFE_m_IRQ_MASK_2(vfe));
+ writel_relaxed(ISPIF_VFE_m_IRQ_MASK_2_RDI2_ENABLE,
+ ispif->base + ISPIF_VFE_m_IRQ_CLEAR_2(vfe));
+ break;
+ }
+
+ writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
+}
+
+/*
+ * ispif_set_intf_cmd - Set command to enable/disable interface
+ * @ispif: ISPIF device
+ * @cmd: interface command
+ * @intf: VFE interface
+ * @vfe: VFE HW module id
+ * @vc: virtual channel
+ */
+static void ispif_set_intf_cmd(struct ispif_device *ispif, u8 cmd,
+ enum ispif_intf intf, u8 vfe, u8 vc)
+{
+ u32 *val;
+
+ if (intf == RDI2) {
+ val = &ispif->intf_cmd[vfe].cmd_1;
+ *val &= ~(0x3 << (vc * 2 + 8));
+ *val |= (cmd << (vc * 2 + 8));
+ wmb();
+ writel_relaxed(*val, ispif->base + ISPIF_VFE_m_INTF_CMD_1(vfe));
+ wmb();
+ } else {
+ val = &ispif->intf_cmd[vfe].cmd_0;
+ *val &= ~(0x3 << (vc * 2 + intf * 8));
+ *val |= (cmd << (vc * 2 + intf * 8));
+ wmb();
+ writel_relaxed(*val, ispif->base + ISPIF_VFE_m_INTF_CMD_0(vfe));
+ wmb();
+ }
+}
+
+/*
+ * ispif_set_stream - Enable/disable streaming on ISPIF module
+ * @sd: ISPIF V4L2 subdevice
+ * @enable: Requested streaming state
+ *
+ * Main configuration of ISPIF module is also done here.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int ispif_set_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct ispif_line *line = v4l2_get_subdevdata(sd);
+ struct ispif_device *ispif = to_ispif(line);
+ enum ispif_intf intf = line->interface;
+ u8 csid = line->csid_id;
+ u8 vfe = line->vfe_id;
+ u8 vc = 0; /* Virtual Channel 0 */
+ u8 cid = vc * 4; /* id of Virtual Channel and Data Type set */
+ int ret;
+
+ if (enable) {
+ if (!media_entity_remote_pad(&line->pads[MSM_ISPIF_PAD_SINK]))
+ return -ENOLINK;
+
+ /* Config */
+
+ mutex_lock(&ispif->config_lock);
+ ispif_select_clk_mux(ispif, intf, csid, vfe, 1);
+
+ ret = ispif_validate_intf_status(ispif, intf, vfe);
+ if (ret < 0) {
+ mutex_unlock(&ispif->config_lock);
+ return ret;
+ }
+
+ ispif_select_csid(ispif, intf, csid, vfe, 1);
+ ispif_select_cid(ispif, intf, cid, vfe, 1);
+ ispif_config_irq(ispif, intf, vfe, 1);
+ ispif_set_intf_cmd(ispif, CMD_ENABLE_FRAME_BOUNDARY,
+ intf, vfe, vc);
+ } else {
+ mutex_lock(&ispif->config_lock);
+ ispif_set_intf_cmd(ispif, CMD_DISABLE_FRAME_BOUNDARY,
+ intf, vfe, vc);
+ mutex_unlock(&ispif->config_lock);
+
+ ret = ispif_wait_for_stop(ispif, intf, vfe);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&ispif->config_lock);
+ ispif_config_irq(ispif, intf, vfe, 0);
+ ispif_select_cid(ispif, intf, cid, vfe, 0);
+ ispif_select_csid(ispif, intf, csid, vfe, 0);
+ ispif_select_clk_mux(ispif, intf, csid, vfe, 0);
+ }
+
+ mutex_unlock(&ispif->config_lock);
+
+ return 0;
+}
+
+/*
+ * __ispif_get_format - Get pointer to format structure
+ * @ispif: ISPIF line
+ * @cfg: V4L2 subdev pad configuration
+ * @pad: pad from which format is requested
+ * @which: TRY or ACTIVE format
+ *
+ * Return pointer to TRY or ACTIVE format structure
+ */
+static struct v4l2_mbus_framefmt *
+__ispif_get_format(struct ispif_line *line,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad,
+ enum v4l2_subdev_format_whence which)
+{
+ if (which == V4L2_SUBDEV_FORMAT_TRY)
+ return v4l2_subdev_get_try_format(&line->subdev, cfg, pad);
+
+ return &line->fmt[pad];
+}
+
+/*
+ * ispif_try_format - Handle try format by pad subdev method
+ * @ispif: ISPIF line
+ * @cfg: V4L2 subdev pad configuration
+ * @pad: pad on which format is requested
+ * @fmt: pointer to v4l2 format structure
+ * @which: wanted subdev format
+ */
+static void ispif_try_format(struct ispif_line *line,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad,
+ struct v4l2_mbus_framefmt *fmt,
+ enum v4l2_subdev_format_whence which)
+{
+ unsigned int i;
+
+ switch (pad) {
+ case MSM_ISPIF_PAD_SINK:
+ /* Set format on sink pad */
+
+ for (i = 0; i < ARRAY_SIZE(ispif_formats); i++)
+ if (fmt->code == ispif_formats[i])
+ break;
+
+ /* If not found, use UYVY as default */
+ if (i >= ARRAY_SIZE(ispif_formats))
+ fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
+
+ fmt->width = clamp_t(u32, fmt->width, 1, 8191);
+ fmt->height = clamp_t(u32, fmt->height, 1, 8191);
+
+ fmt->field = V4L2_FIELD_NONE;
+ fmt->colorspace = V4L2_COLORSPACE_SRGB;
+
+ break;
+
+ case MSM_ISPIF_PAD_SRC:
+ /* Set and return a format same as sink pad */
+
+ *fmt = *__ispif_get_format(line, cfg, MSM_ISPIF_PAD_SINK,
+ which);
+
+ break;
+ }
+
+ fmt->colorspace = V4L2_COLORSPACE_SRGB;
+}
+
+/*
+ * ispif_enum_mbus_code - Handle pixel format enumeration
+ * @sd: ISPIF V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @code: pointer to v4l2_subdev_mbus_code_enum structure
+ * return -EINVAL or zero on success
+ */
+static int ispif_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ struct ispif_line *line = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ if (code->pad == MSM_ISPIF_PAD_SINK) {
+ if (code->index >= ARRAY_SIZE(ispif_formats))
+ return -EINVAL;
+
+ code->code = ispif_formats[code->index];
+ } else {
+ if (code->index > 0)
+ return -EINVAL;
+
+ format = __ispif_get_format(line, cfg, MSM_ISPIF_PAD_SINK,
+ code->which);
+
+ code->code = format->code;
+ }
+
+ return 0;
+}
+
+/*
+ * ispif_enum_frame_size - Handle frame size enumeration
+ * @sd: ISPIF V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @fse: pointer to v4l2_subdev_frame_size_enum structure
+ * return -EINVAL or zero on success
+ */
+static int ispif_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ struct ispif_line *line = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt format;
+
+ if (fse->index != 0)
+ return -EINVAL;
+
+ format.code = fse->code;
+ format.width = 1;
+ format.height = 1;
+ ispif_try_format(line, cfg, fse->pad, &format, fse->which);
+ fse->min_width = format.width;
+ fse->min_height = format.height;
+
+ if (format.code != fse->code)
+ return -EINVAL;
+
+ format.code = fse->code;
+ format.width = -1;
+ format.height = -1;
+ ispif_try_format(line, cfg, fse->pad, &format, fse->which);
+ fse->max_width = format.width;
+ fse->max_height = format.height;
+
+ return 0;
+}
+
+/*
+ * ispif_get_format - Handle get format by pads subdev method
+ * @sd: ISPIF V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @fmt: pointer to v4l2 subdev format structure
+ *
+ * Return -EINVAL or zero on success
+ */
+static int ispif_get_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct ispif_line *line = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ format = __ispif_get_format(line, cfg, fmt->pad, fmt->which);
+ if (format == NULL)
+ return -EINVAL;
+
+ fmt->format = *format;
+
+ return 0;
+}
+
+/*
+ * ispif_set_format - Handle set format by pads subdev method
+ * @sd: ISPIF V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @fmt: pointer to v4l2 subdev format structure
+ *
+ * Return -EINVAL or zero on success
+ */
+static int ispif_set_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct ispif_line *line = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ format = __ispif_get_format(line, cfg, fmt->pad, fmt->which);
+ if (format == NULL)
+ return -EINVAL;
+
+ ispif_try_format(line, cfg, fmt->pad, &fmt->format, fmt->which);
+ *format = fmt->format;
+
+ /* Propagate the format from sink to source */
+ if (fmt->pad == MSM_ISPIF_PAD_SINK) {
+ format = __ispif_get_format(line, cfg, MSM_ISPIF_PAD_SRC,
+ fmt->which);
+
+ *format = fmt->format;
+ ispif_try_format(line, cfg, MSM_ISPIF_PAD_SRC, format,
+ fmt->which);
+ }
+
+ return 0;
+}
+
+/*
+ * ispif_init_formats - Initialize formats on all pads
+ * @sd: ISPIF V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ *
+ * Initialize all pad formats with default values.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int ispif_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_subdev_format format = {
+ .pad = MSM_ISPIF_PAD_SINK,
+ .which = fh ? V4L2_SUBDEV_FORMAT_TRY :
+ V4L2_SUBDEV_FORMAT_ACTIVE,
+ .format = {
+ .code = MEDIA_BUS_FMT_UYVY8_2X8,
+ .width = 1920,
+ .height = 1080
+ }
+ };
+
+ return ispif_set_format(sd, fh ? fh->pad : NULL, &format);
+}
+
+/*
+ * msm_ispif_subdev_init - Initialize ISPIF device structure and resources
+ * @ispif: ISPIF device
+ * @res: ISPIF module resources table
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int msm_ispif_subdev_init(struct ispif_device *ispif,
+ const struct resources_ispif *res)
+{
+ struct device *dev = to_device(ispif);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *r;
+ int i;
+ int ret;
+
+ /* Memory */
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[0]);
+ ispif->base = devm_ioremap_resource(dev, r);
+ if (IS_ERR(ispif->base)) {
+ dev_err(dev, "could not map memory\n");
+ return PTR_ERR(ispif->base);
+ }
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[1]);
+ ispif->base_clk_mux = devm_ioremap_resource(dev, r);
+ if (IS_ERR(ispif->base_clk_mux)) {
+ dev_err(dev, "could not map memory\n");
+ return PTR_ERR(ispif->base_clk_mux);
+ }
+
+ /* Interrupt */
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res->interrupt);
+
+ if (!r) {
+ dev_err(dev, "missing IRQ\n");
+ return -EINVAL;
+ }
+
+ ispif->irq = r->start;
+ snprintf(ispif->irq_name, sizeof(ispif->irq_name), "%s_%s",
+ dev_name(dev), MSM_ISPIF_NAME);
+ ret = devm_request_irq(dev, ispif->irq, ispif_isr,
+ IRQF_TRIGGER_RISING, ispif->irq_name, ispif);
+ if (ret < 0) {
+ dev_err(dev, "request_irq failed: %d\n", ret);
+ return ret;
+ }
+
+ /* Clocks */
+
+ ispif->nclocks = 0;
+ while (res->clock[ispif->nclocks])
+ ispif->nclocks++;
+
+ ispif->clock = devm_kcalloc(dev,
+ ispif->nclocks, sizeof(*ispif->clock),
+ GFP_KERNEL);
+ if (!ispif->clock)
+ return -ENOMEM;
+
+ for (i = 0; i < ispif->nclocks; i++) {
+ struct camss_clock *clock = &ispif->clock[i];
+
+ clock->clk = devm_clk_get(dev, res->clock[i]);
+ if (IS_ERR(clock->clk))
+ return PTR_ERR(clock->clk);
+
+ clock->freq = NULL;
+ clock->nfreqs = 0;
+ }
+
+ ispif->nclocks_for_reset = 0;
+ while (res->clock_for_reset[ispif->nclocks_for_reset])
+ ispif->nclocks_for_reset++;
+
+ ispif->clock_for_reset = devm_kcalloc(dev,
+ ispif->nclocks_for_reset,
+ sizeof(*ispif->clock_for_reset),
+ GFP_KERNEL);
+ if (!ispif->clock_for_reset)
+ return -ENOMEM;
+
+ for (i = 0; i < ispif->nclocks_for_reset; i++) {
+ struct camss_clock *clock = &ispif->clock_for_reset[i];
+
+ clock->clk = devm_clk_get(dev, res->clock_for_reset[i]);
+ if (IS_ERR(clock->clk))
+ return PTR_ERR(clock->clk);
+
+ clock->freq = NULL;
+ clock->nfreqs = 0;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(ispif->line); i++)
+ ispif->line[i].id = i;
+
+ mutex_init(&ispif->power_lock);
+ ispif->power_count = 0;
+
+ mutex_init(&ispif->config_lock);
+
+ init_completion(&ispif->reset_complete);
+
+ return 0;
+}
+
+/*
+ * ispif_get_intf - Get ISPIF interface to use by VFE line id
+ * @line_id: VFE line id that the ISPIF line is connected to
+ *
+ * Return ISPIF interface to use
+ */
+static enum ispif_intf ispif_get_intf(enum vfe_line_id line_id)
+{
+ switch (line_id) {
+ case (VFE_LINE_RDI0):
+ return RDI0;
+ case (VFE_LINE_RDI1):
+ return RDI1;
+ case (VFE_LINE_RDI2):
+ return RDI2;
+ case (VFE_LINE_PIX):
+ return PIX0;
+ default:
+ return RDI0;
+ }
+}
+
+/*
+ * ispif_link_setup - Setup ISPIF connections
+ * @entity: Pointer to media entity structure
+ * @local: Pointer to local pad
+ * @remote: Pointer to remote pad
+ * @flags: Link flags
+ *
+ * Return 0 on success
+ */
+static int ispif_link_setup(struct media_entity *entity,
+ const struct media_pad *local,
+ const struct media_pad *remote, u32 flags)
+{
+ if (flags & MEDIA_LNK_FL_ENABLED) {
+ if (media_entity_remote_pad(local))
+ return -EBUSY;
+
+ if (local->flags & MEDIA_PAD_FL_SINK) {
+ struct v4l2_subdev *sd;
+ struct ispif_line *line;
+
+ sd = media_entity_to_v4l2_subdev(entity);
+ line = v4l2_get_subdevdata(sd);
+
+ msm_csid_get_csid_id(remote->entity, &line->csid_id);
+ } else { /* MEDIA_PAD_FL_SOURCE */
+ struct v4l2_subdev *sd;
+ struct ispif_line *line;
+ enum vfe_line_id id;
+
+ sd = media_entity_to_v4l2_subdev(entity);
+ line = v4l2_get_subdevdata(sd);
+
+ msm_vfe_get_vfe_id(remote->entity, &line->vfe_id);
+ msm_vfe_get_vfe_line_id(remote->entity, &id);
+ line->interface = ispif_get_intf(id);
+ }
+ }
+
+ return 0;
+}
+
+static const struct v4l2_subdev_core_ops ispif_core_ops = {
+ .s_power = ispif_set_power,
+};
+
+static const struct v4l2_subdev_video_ops ispif_video_ops = {
+ .s_stream = ispif_set_stream,
+};
+
+static const struct v4l2_subdev_pad_ops ispif_pad_ops = {
+ .enum_mbus_code = ispif_enum_mbus_code,
+ .enum_frame_size = ispif_enum_frame_size,
+ .get_fmt = ispif_get_format,
+ .set_fmt = ispif_set_format,
+};
+
+static const struct v4l2_subdev_ops ispif_v4l2_ops = {
+ .core = &ispif_core_ops,
+ .video = &ispif_video_ops,
+ .pad = &ispif_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops ispif_v4l2_internal_ops = {
+ .open = ispif_init_formats,
+};
+
+static const struct media_entity_operations ispif_media_ops = {
+ .link_setup = ispif_link_setup,
+ .link_validate = v4l2_subdev_link_validate,
+};
+
+/*
+ * msm_ispif_register_entities - Register subdev node for ISPIF module
+ * @ispif: ISPIF device
+ * @v4l2_dev: V4L2 device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int msm_ispif_register_entities(struct ispif_device *ispif,
+ struct v4l2_device *v4l2_dev)
+{
+ struct device *dev = to_device(ispif);
+ int ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ispif->line); i++) {
+ struct v4l2_subdev *sd = &ispif->line[i].subdev;
+ struct media_pad *pads = ispif->line[i].pads;
+
+ v4l2_subdev_init(sd, &ispif_v4l2_ops);
+ sd->internal_ops = &ispif_v4l2_internal_ops;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d",
+ MSM_ISPIF_NAME, i);
+ v4l2_set_subdevdata(sd, &ispif->line[i]);
+
+ ret = ispif_init_formats(sd, NULL);
+ if (ret < 0) {
+ dev_err(dev, "Failed to init format: %d\n", ret);
+ goto error;
+ }
+
+ pads[MSM_ISPIF_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+ pads[MSM_ISPIF_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
+
+ sd->entity.function = MEDIA_ENT_F_IO_V4L;
+ sd->entity.ops = &ispif_media_ops;
+ ret = media_entity_pads_init(&sd->entity, MSM_ISPIF_PADS_NUM,
+ pads);
+ if (ret < 0) {
+ dev_err(dev, "Failed to init media entity: %d\n", ret);
+ goto error;
+ }
+
+ ret = v4l2_device_register_subdev(v4l2_dev, sd);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register subdev: %d\n", ret);
+ media_entity_cleanup(&sd->entity);
+ goto error;
+ }
+ }
+
+ return 0;
+
+error:
+ for (i--; i >= 0; i--) {
+ struct v4l2_subdev *sd = &ispif->line[i].subdev;
+
+ v4l2_device_unregister_subdev(sd);
+ media_entity_cleanup(&sd->entity);
+ }
+
+ return ret;
+}
+
+/*
+ * msm_ispif_unregister_entities - Unregister ISPIF module subdev node
+ * @ispif: ISPIF device
+ */
+void msm_ispif_unregister_entities(struct ispif_device *ispif)
+{
+ int i;
+
+ mutex_destroy(&ispif->power_lock);
+ mutex_destroy(&ispif->config_lock);
+
+ for (i = 0; i < ARRAY_SIZE(ispif->line); i++) {
+ struct v4l2_subdev *sd = &ispif->line[i].subdev;
+
+ v4l2_device_unregister_subdev(sd);
+ media_entity_cleanup(&sd->entity);
+ }
+}
new file mode 100644
@@ -0,0 +1,85 @@
+/*
+ * camss-ispif.h
+ *
+ * Qualcomm MSM Camera Subsystem - ISPIF (ISP Interface) Module
+ *
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015-2018 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef QC_MSM_CAMSS_ISPIF_H
+#define QC_MSM_CAMSS_ISPIF_H
+
+#include <linux/clk.h>
+#include <media/media-entity.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+/* Number of ISPIF lines - same as number of CSID hardware modules */
+#define MSM_ISPIF_LINE_NUM 2
+
+#define MSM_ISPIF_PAD_SINK 0
+#define MSM_ISPIF_PAD_SRC 1
+#define MSM_ISPIF_PADS_NUM 2
+
+#define MSM_ISPIF_VFE_NUM 1
+
+enum ispif_intf {
+ PIX0,
+ RDI0,
+ PIX1,
+ RDI1,
+ RDI2
+};
+
+struct ispif_intf_cmd_reg {
+ u32 cmd_0;
+ u32 cmd_1;
+};
+
+struct ispif_line {
+ u8 id;
+ u8 csid_id;
+ u8 vfe_id;
+ enum ispif_intf interface;
+ struct v4l2_subdev subdev;
+ struct media_pad pads[MSM_ISPIF_PADS_NUM];
+ struct v4l2_mbus_framefmt fmt[MSM_ISPIF_PADS_NUM];
+};
+
+struct ispif_device {
+ void __iomem *base;
+ void __iomem *base_clk_mux;
+ u32 irq;
+ char irq_name[30];
+ struct camss_clock *clock;
+ int nclocks;
+ struct camss_clock *clock_for_reset;
+ int nclocks_for_reset;
+ struct completion reset_complete;
+ int power_count;
+ struct mutex power_lock;
+ struct ispif_intf_cmd_reg intf_cmd[MSM_ISPIF_VFE_NUM];
+ struct mutex config_lock;
+ struct ispif_line line[MSM_ISPIF_LINE_NUM];
+};
+
+struct resources_ispif;
+
+int msm_ispif_subdev_init(struct ispif_device *ispif,
+ const struct resources_ispif *res);
+
+int msm_ispif_register_entities(struct ispif_device *ispif,
+ struct v4l2_device *v4l2_dev);
+
+void msm_ispif_unregister_entities(struct ispif_device *ispif);
+
+#endif /* QC_MSM_CAMSS_ISPIF_H */
new file mode 100644
@@ -0,0 +1,3093 @@
+/*
+ * camss-vfe.c
+ *
+ * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module
+ *
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015-2018 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/iommu.h>
+#include <linux/iopoll.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock_types.h>
+#include <linux/spinlock.h>
+#include <media/media-entity.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+#include "camss-vfe.h"
+#include "camss.h"
+
+#define MSM_VFE_NAME "msm_vfe"
+
+#define vfe_line_array(ptr_line) \
+ ((const struct vfe_line (*)[]) &(ptr_line[-(ptr_line->id)]))
+
+#define to_vfe(ptr_line) \
+ container_of(vfe_line_array(ptr_line), struct vfe_device, ptr_line)
+
+#define VFE_0_HW_VERSION 0x000
+
+#define VFE_0_GLOBAL_RESET_CMD 0x00c
+#define VFE_0_GLOBAL_RESET_CMD_CORE (1 << 0)
+#define VFE_0_GLOBAL_RESET_CMD_CAMIF (1 << 1)
+#define VFE_0_GLOBAL_RESET_CMD_BUS (1 << 2)
+#define VFE_0_GLOBAL_RESET_CMD_BUS_BDG (1 << 3)
+#define VFE_0_GLOBAL_RESET_CMD_REGISTER (1 << 4)
+#define VFE_0_GLOBAL_RESET_CMD_TIMER (1 << 5)
+#define VFE_0_GLOBAL_RESET_CMD_PM (1 << 6)
+#define VFE_0_GLOBAL_RESET_CMD_BUS_MISR (1 << 7)
+#define VFE_0_GLOBAL_RESET_CMD_TESTGEN (1 << 8)
+
+#define VFE_0_MODULE_CFG 0x018
+#define VFE_0_MODULE_CFG_DEMUX (1 << 2)
+#define VFE_0_MODULE_CFG_CHROMA_UPSAMPLE (1 << 3)
+#define VFE_0_MODULE_CFG_SCALE_ENC (1 << 23)
+#define VFE_0_MODULE_CFG_CROP_ENC (1 << 27)
+
+#define VFE_0_CORE_CFG 0x01c
+#define VFE_0_CORE_CFG_PIXEL_PATTERN_YCBYCR 0x4
+#define VFE_0_CORE_CFG_PIXEL_PATTERN_YCRYCB 0x5
+#define VFE_0_CORE_CFG_PIXEL_PATTERN_CBYCRY 0x6
+#define VFE_0_CORE_CFG_PIXEL_PATTERN_CRYCBY 0x7
+
+#define VFE_0_IRQ_CMD 0x024
+#define VFE_0_IRQ_CMD_GLOBAL_CLEAR (1 << 0)
+
+#define VFE_0_IRQ_MASK_0 0x028
+#define VFE_0_IRQ_MASK_0_CAMIF_SOF (1 << 0)
+#define VFE_0_IRQ_MASK_0_CAMIF_EOF (1 << 1)
+#define VFE_0_IRQ_MASK_0_RDIn_REG_UPDATE(n) (1 << ((n) + 5))
+#define VFE_0_IRQ_MASK_0_line_n_REG_UPDATE(n) \
+ ((n) == VFE_LINE_PIX ? (1 << 4) : VFE_0_IRQ_MASK_0_RDIn_REG_UPDATE(n))
+#define VFE_0_IRQ_MASK_0_IMAGE_MASTER_n_PING_PONG(n) (1 << ((n) + 8))
+#define VFE_0_IRQ_MASK_0_IMAGE_COMPOSITE_DONE_n(n) (1 << ((n) + 25))
+#define VFE_0_IRQ_MASK_0_RESET_ACK (1 << 31)
+#define VFE_0_IRQ_MASK_1 0x02c
+#define VFE_0_IRQ_MASK_1_CAMIF_ERROR (1 << 0)
+#define VFE_0_IRQ_MASK_1_VIOLATION (1 << 7)
+#define VFE_0_IRQ_MASK_1_BUS_BDG_HALT_ACK (1 << 8)
+#define VFE_0_IRQ_MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(n) (1 << ((n) + 9))
+#define VFE_0_IRQ_MASK_1_RDIn_SOF(n) (1 << ((n) + 29))
+
+#define VFE_0_IRQ_CLEAR_0 0x030
+#define VFE_0_IRQ_CLEAR_1 0x034
+
+#define VFE_0_IRQ_STATUS_0 0x038
+#define VFE_0_IRQ_STATUS_0_CAMIF_SOF (1 << 0)
+#define VFE_0_IRQ_STATUS_0_RDIn_REG_UPDATE(n) (1 << ((n) + 5))
+#define VFE_0_IRQ_STATUS_0_line_n_REG_UPDATE(n) \
+ ((n) == VFE_LINE_PIX ? (1 << 4) : VFE_0_IRQ_STATUS_0_RDIn_REG_UPDATE(n))
+#define VFE_0_IRQ_STATUS_0_IMAGE_MASTER_n_PING_PONG(n) (1 << ((n) + 8))
+#define VFE_0_IRQ_STATUS_0_IMAGE_COMPOSITE_DONE_n(n) (1 << ((n) + 25))
+#define VFE_0_IRQ_STATUS_0_RESET_ACK (1 << 31)
+#define VFE_0_IRQ_STATUS_1 0x03c
+#define VFE_0_IRQ_STATUS_1_VIOLATION (1 << 7)
+#define VFE_0_IRQ_STATUS_1_BUS_BDG_HALT_ACK (1 << 8)
+#define VFE_0_IRQ_STATUS_1_RDIn_SOF(n) (1 << ((n) + 29))
+
+#define VFE_0_IRQ_COMPOSITE_MASK_0 0x40
+#define VFE_0_VIOLATION_STATUS 0x48
+
+#define VFE_0_BUS_CMD 0x4c
+#define VFE_0_BUS_CMD_Mx_RLD_CMD(x) (1 << (x))
+
+#define VFE_0_BUS_CFG 0x050
+
+#define VFE_0_BUS_XBAR_CFG_x(x) (0x58 + 0x4 * ((x) / 2))
+#define VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_EN (1 << 1)
+#define VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTER_INTRA (0x3 << 4)
+#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT 8
+#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_LUMA 0
+#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI0 5
+#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI1 6
+#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI2 7
+
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_CFG(n) (0x06c + 0x24 * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_WR_PATH_SHIFT 0
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_FRM_BASED_SHIFT 1
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_PING_ADDR(n) (0x070 + 0x24 * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_PONG_ADDR(n) (0x074 + 0x24 * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG(n) (0x078 + 0x24 * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_DROP_PER_SHIFT 2
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_DROP_PER_MASK (0x1F << 2)
+
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_UB_CFG(n) (0x07c + 0x24 * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_UB_CFG_OFFSET_SHIFT 16
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_IMAGE_SIZE(n) (0x080 + 0x24 * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_BUFFER_CFG(n) (0x084 + 0x24 * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_FRAMEDROP_PATTERN(n) \
+ (0x088 + 0x24 * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_IRQ_SUBSAMPLE_PATTERN(n) \
+ (0x08c + 0x24 * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_IRQ_SUBSAMPLE_PATTERN_DEF 0xffffffff
+
+#define VFE_0_BUS_PING_PONG_STATUS 0x268
+
+#define VFE_0_BUS_BDG_CMD 0x2c0
+#define VFE_0_BUS_BDG_CMD_HALT_REQ 1
+
+#define VFE_0_BUS_BDG_QOS_CFG_0 0x2c4
+#define VFE_0_BUS_BDG_QOS_CFG_0_CFG 0xaaa5aaa5
+#define VFE_0_BUS_BDG_QOS_CFG_1 0x2c8
+#define VFE_0_BUS_BDG_QOS_CFG_2 0x2cc
+#define VFE_0_BUS_BDG_QOS_CFG_3 0x2d0
+#define VFE_0_BUS_BDG_QOS_CFG_4 0x2d4
+#define VFE_0_BUS_BDG_QOS_CFG_5 0x2d8
+#define VFE_0_BUS_BDG_QOS_CFG_6 0x2dc
+#define VFE_0_BUS_BDG_QOS_CFG_7 0x2e0
+#define VFE_0_BUS_BDG_QOS_CFG_7_CFG 0x0001aaa5
+
+#define VFE_0_RDI_CFG_x(x) (0x2e8 + (0x4 * (x)))
+#define VFE_0_RDI_CFG_x_RDI_STREAM_SEL_SHIFT 28
+#define VFE_0_RDI_CFG_x_RDI_STREAM_SEL_MASK (0xf << 28)
+#define VFE_0_RDI_CFG_x_RDI_M0_SEL_SHIFT 4
+#define VFE_0_RDI_CFG_x_RDI_M0_SEL_MASK (0xf << 4)
+#define VFE_0_RDI_CFG_x_RDI_EN_BIT (1 << 2)
+#define VFE_0_RDI_CFG_x_MIPI_EN_BITS 0x3
+#define VFE_0_RDI_CFG_x_RDI_Mr_FRAME_BASED_EN(r) (1 << (16 + (r)))
+
+#define VFE_0_CAMIF_CMD 0x2f4
+#define VFE_0_CAMIF_CMD_DISABLE_FRAME_BOUNDARY 0
+#define VFE_0_CAMIF_CMD_ENABLE_FRAME_BOUNDARY 1
+#define VFE_0_CAMIF_CMD_CLEAR_CAMIF_STATUS (1 << 2)
+#define VFE_0_CAMIF_CFG 0x2f8
+#define VFE_0_CAMIF_CFG_VFE_OUTPUT_EN (1 << 6)
+#define VFE_0_CAMIF_FRAME_CFG 0x300
+#define VFE_0_CAMIF_WINDOW_WIDTH_CFG 0x304
+#define VFE_0_CAMIF_WINDOW_HEIGHT_CFG 0x308
+#define VFE_0_CAMIF_SUBSAMPLE_CFG_0 0x30c
+#define VFE_0_CAMIF_IRQ_SUBSAMPLE_PATTERN 0x314
+#define VFE_0_CAMIF_STATUS 0x31c
+#define VFE_0_CAMIF_STATUS_HALT (1 << 31)
+
+#define VFE_0_REG_UPDATE 0x378
+#define VFE_0_REG_UPDATE_RDIn(n) (1 << (1 + (n)))
+#define VFE_0_REG_UPDATE_line_n(n) \
+ ((n) == VFE_LINE_PIX ? 1 : VFE_0_REG_UPDATE_RDIn(n))
+
+#define VFE_0_DEMUX_CFG 0x424
+#define VFE_0_DEMUX_CFG_PERIOD 0x3
+#define VFE_0_DEMUX_GAIN_0 0x428
+#define VFE_0_DEMUX_GAIN_0_CH0_EVEN (0x80 << 0)
+#define VFE_0_DEMUX_GAIN_0_CH0_ODD (0x80 << 16)
+#define VFE_0_DEMUX_GAIN_1 0x42c
+#define VFE_0_DEMUX_GAIN_1_CH1 (0x80 << 0)
+#define VFE_0_DEMUX_GAIN_1_CH2 (0x80 << 16)
+#define VFE_0_DEMUX_EVEN_CFG 0x438
+#define VFE_0_DEMUX_EVEN_CFG_PATTERN_YUYV 0x9cac
+#define VFE_0_DEMUX_EVEN_CFG_PATTERN_YVYU 0xac9c
+#define VFE_0_DEMUX_EVEN_CFG_PATTERN_UYVY 0xc9ca
+#define VFE_0_DEMUX_EVEN_CFG_PATTERN_VYUY 0xcac9
+#define VFE_0_DEMUX_ODD_CFG 0x43c
+#define VFE_0_DEMUX_ODD_CFG_PATTERN_YUYV 0x9cac
+#define VFE_0_DEMUX_ODD_CFG_PATTERN_YVYU 0xac9c
+#define VFE_0_DEMUX_ODD_CFG_PATTERN_UYVY 0xc9ca
+#define VFE_0_DEMUX_ODD_CFG_PATTERN_VYUY 0xcac9
+
+#define VFE_0_SCALE_ENC_Y_CFG 0x75c
+#define VFE_0_SCALE_ENC_Y_H_IMAGE_SIZE 0x760
+#define VFE_0_SCALE_ENC_Y_H_PHASE 0x764
+#define VFE_0_SCALE_ENC_Y_V_IMAGE_SIZE 0x76c
+#define VFE_0_SCALE_ENC_Y_V_PHASE 0x770
+#define VFE_0_SCALE_ENC_CBCR_CFG 0x778
+#define VFE_0_SCALE_ENC_CBCR_H_IMAGE_SIZE 0x77c
+#define VFE_0_SCALE_ENC_CBCR_H_PHASE 0x780
+#define VFE_0_SCALE_ENC_CBCR_V_IMAGE_SIZE 0x790
+#define VFE_0_SCALE_ENC_CBCR_V_PHASE 0x794
+
+#define VFE_0_CROP_ENC_Y_WIDTH 0x854
+#define VFE_0_CROP_ENC_Y_HEIGHT 0x858
+#define VFE_0_CROP_ENC_CBCR_WIDTH 0x85c
+#define VFE_0_CROP_ENC_CBCR_HEIGHT 0x860
+
+#define VFE_0_CLAMP_ENC_MAX_CFG 0x874
+#define VFE_0_CLAMP_ENC_MAX_CFG_CH0 (0xff << 0)
+#define VFE_0_CLAMP_ENC_MAX_CFG_CH1 (0xff << 8)
+#define VFE_0_CLAMP_ENC_MAX_CFG_CH2 (0xff << 16)
+#define VFE_0_CLAMP_ENC_MIN_CFG 0x878
+#define VFE_0_CLAMP_ENC_MIN_CFG_CH0 (0x0 << 0)
+#define VFE_0_CLAMP_ENC_MIN_CFG_CH1 (0x0 << 8)
+#define VFE_0_CLAMP_ENC_MIN_CFG_CH2 (0x0 << 16)
+
+#define VFE_0_CGC_OVERRIDE_1 0x974
+#define VFE_0_CGC_OVERRIDE_1_IMAGE_Mx_CGC_OVERRIDE(x) (1 << (x))
+
+/* VFE reset timeout */
+#define VFE_RESET_TIMEOUT_MS 50
+/* VFE halt timeout */
+#define VFE_HALT_TIMEOUT_MS 100
+/* Max number of frame drop updates per frame */
+#define VFE_FRAME_DROP_UPDATES 5
+/* Frame drop value. NOTE: VAL + UPDATES should not exceed 31 */
+#define VFE_FRAME_DROP_VAL 20
+
+#define VFE_NEXT_SOF_MS 500
+
+#define CAMIF_TIMEOUT_SLEEP_US 1000
+#define CAMIF_TIMEOUT_ALL_US 1000000
+
+#define SCALER_RATIO_MAX 16
+
+static const struct {
+ u32 code;
+ u8 bpp;
+} vfe_formats[] = {
+ {
+ MEDIA_BUS_FMT_UYVY8_2X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_VYUY8_2X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_YUYV8_2X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_YVYU8_2X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR8_1X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG8_1X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG8_1X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB8_1X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR10_1X10,
+ 10,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG10_1X10,
+ 10,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG10_1X10,
+ 10,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB10_1X10,
+ 10,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR12_1X12,
+ 12,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG12_1X12,
+ 12,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG12_1X12,
+ 12,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB12_1X12,
+ 12,
+ }
+};
+
+/*
+ * vfe_get_bpp - map media bus format to bits per pixel
+ * @code: media bus format code
+ *
+ * Return number of bits per pixel
+ */
+static u8 vfe_get_bpp(u32 code)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(vfe_formats); i++)
+ if (code == vfe_formats[i].code)
+ return vfe_formats[i].bpp;
+
+ WARN(1, "Unknown format\n");
+
+ return vfe_formats[0].bpp;
+}
+
+static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
+{
+ u32 bits = readl_relaxed(vfe->base + reg);
+
+ writel_relaxed(bits & ~clr_bits, vfe->base + reg);
+}
+
+static inline void vfe_reg_set(struct vfe_device *vfe, u32 reg, u32 set_bits)
+{
+ u32 bits = readl_relaxed(vfe->base + reg);
+
+ writel_relaxed(bits | set_bits, vfe->base + reg);
+}
+
+static void vfe_global_reset(struct vfe_device *vfe)
+{
+ u32 reset_bits = VFE_0_GLOBAL_RESET_CMD_TESTGEN |
+ VFE_0_GLOBAL_RESET_CMD_BUS_MISR |
+ VFE_0_GLOBAL_RESET_CMD_PM |
+ VFE_0_GLOBAL_RESET_CMD_TIMER |
+ VFE_0_GLOBAL_RESET_CMD_REGISTER |
+ VFE_0_GLOBAL_RESET_CMD_BUS_BDG |
+ VFE_0_GLOBAL_RESET_CMD_BUS |
+ VFE_0_GLOBAL_RESET_CMD_CAMIF |
+ VFE_0_GLOBAL_RESET_CMD_CORE;
+
+ writel_relaxed(reset_bits, vfe->base + VFE_0_GLOBAL_RESET_CMD);
+}
+
+static void vfe_wm_enable(struct vfe_device *vfe, u8 wm, u8 enable)
+{
+ if (enable)
+ vfe_reg_set(vfe, VFE_0_BUS_IMAGE_MASTER_n_WR_CFG(wm),
+ 1 << VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_WR_PATH_SHIFT);
+ else
+ vfe_reg_clr(vfe, VFE_0_BUS_IMAGE_MASTER_n_WR_CFG(wm),
+ 1 << VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_WR_PATH_SHIFT);
+}
+
+static void vfe_wm_frame_based(struct vfe_device *vfe, u8 wm, u8 enable)
+{
+ if (enable)
+ vfe_reg_set(vfe, VFE_0_BUS_IMAGE_MASTER_n_WR_CFG(wm),
+ 1 << VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_FRM_BASED_SHIFT);
+ else
+ vfe_reg_clr(vfe, VFE_0_BUS_IMAGE_MASTER_n_WR_CFG(wm),
+ 1 << VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_FRM_BASED_SHIFT);
+}
+
+#define CALC_WORD(width, M, N) (((width) * (M) + (N) - 1) / (N))
+
+static int vfe_word_per_line(uint32_t format, uint32_t pixel_per_line)
+{
+ int val = 0;
+
+ switch (format) {
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_NV21:
+ case V4L2_PIX_FMT_NV16:
+ case V4L2_PIX_FMT_NV61:
+ val = CALC_WORD(pixel_per_line, 1, 8);
+ break;
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_YVYU:
+ case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_VYUY:
+ val = CALC_WORD(pixel_per_line, 2, 8);
+ break;
+ }
+
+ return val;
+}
+
+static void vfe_get_wm_sizes(struct v4l2_pix_format_mplane *pix, u8 plane,
+ u16 *width, u16 *height, u16 *bytesperline)
+{
+ switch (pix->pixelformat) {
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_NV21:
+ *width = pix->width;
+ *height = pix->height;
+ *bytesperline = pix->plane_fmt[0].bytesperline;
+ if (plane == 1)
+ *height /= 2;
+ break;
+ case V4L2_PIX_FMT_NV16:
+ case V4L2_PIX_FMT_NV61:
+ *width = pix->width;
+ *height = pix->height;
+ *bytesperline = pix->plane_fmt[0].bytesperline;
+ break;
+ }
+}
+
+static void vfe_wm_line_based(struct vfe_device *vfe, u32 wm,
+ struct v4l2_pix_format_mplane *pix,
+ u8 plane, u32 enable)
+{
+ u32 reg;
+
+ if (enable) {
+ u16 width = 0, height = 0, bytesperline = 0, wpl;
+
+ vfe_get_wm_sizes(pix, plane, &width, &height, &bytesperline);
+
+ wpl = vfe_word_per_line(pix->pixelformat, width);
+
+ reg = height - 1;
+ reg |= ((wpl + 1) / 2 - 1) << 16;
+
+ writel_relaxed(reg, vfe->base +
+ VFE_0_BUS_IMAGE_MASTER_n_WR_IMAGE_SIZE(wm));
+
+ wpl = vfe_word_per_line(pix->pixelformat, bytesperline);
+
+ reg = 0x3;
+ reg |= (height - 1) << 4;
+ reg |= wpl << 16;
+
+ writel_relaxed(reg, vfe->base +
+ VFE_0_BUS_IMAGE_MASTER_n_WR_BUFFER_CFG(wm));
+ } else {
+ writel_relaxed(0, vfe->base +
+ VFE_0_BUS_IMAGE_MASTER_n_WR_IMAGE_SIZE(wm));
+ writel_relaxed(0, vfe->base +
+ VFE_0_BUS_IMAGE_MASTER_n_WR_BUFFER_CFG(wm));
+ }
+}
+
+static void vfe_wm_set_framedrop_period(struct vfe_device *vfe, u8 wm, u8 per)
+{
+ u32 reg;
+
+ reg = readl_relaxed(vfe->base +
+ VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG(wm));
+
+ reg &= ~(VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_DROP_PER_MASK);
+
+ reg |= (per << VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_DROP_PER_SHIFT)
+ & VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_DROP_PER_MASK;
+
+ writel_relaxed(reg,
+ vfe->base + VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG(wm));
+}
+
+static void vfe_wm_set_framedrop_pattern(struct vfe_device *vfe, u8 wm,
+ u32 pattern)
+{
+ writel_relaxed(pattern,
+ vfe->base + VFE_0_BUS_IMAGE_MASTER_n_WR_FRAMEDROP_PATTERN(wm));
+}
+
+static void vfe_wm_set_ub_cfg(struct vfe_device *vfe, u8 wm, u16 offset,
+ u16 depth)
+{
+ u32 reg;
+
+ reg = (offset << VFE_0_BUS_IMAGE_MASTER_n_WR_UB_CFG_OFFSET_SHIFT) |
+ depth;
+ writel_relaxed(reg, vfe->base + VFE_0_BUS_IMAGE_MASTER_n_WR_UB_CFG(wm));
+}
+
+static void vfe_bus_reload_wm(struct vfe_device *vfe, u8 wm)
+{
+ wmb();
+ writel_relaxed(VFE_0_BUS_CMD_Mx_RLD_CMD(wm), vfe->base + VFE_0_BUS_CMD);
+ wmb();
+}
+
+static void vfe_wm_set_ping_addr(struct vfe_device *vfe, u8 wm, u32 addr)
+{
+ writel_relaxed(addr,
+ vfe->base + VFE_0_BUS_IMAGE_MASTER_n_WR_PING_ADDR(wm));
+}
+
+static void vfe_wm_set_pong_addr(struct vfe_device *vfe, u8 wm, u32 addr)
+{
+ writel_relaxed(addr,
+ vfe->base + VFE_0_BUS_IMAGE_MASTER_n_WR_PONG_ADDR(wm));
+}
+
+static int vfe_wm_get_ping_pong_status(struct vfe_device *vfe, u8 wm)
+{
+ u32 reg;
+
+ reg = readl_relaxed(vfe->base + VFE_0_BUS_PING_PONG_STATUS);
+
+ return (reg >> wm) & 0x1;
+}
+
+static void vfe_bus_enable_wr_if(struct vfe_device *vfe, u8 enable)
+{
+ if (enable)
+ writel_relaxed(0x10000009, vfe->base + VFE_0_BUS_CFG);
+ else
+ writel_relaxed(0, vfe->base + VFE_0_BUS_CFG);
+}
+
+static void vfe_bus_connect_wm_to_rdi(struct vfe_device *vfe, u8 wm,
+ enum vfe_line_id id)
+{
+ u32 reg;
+
+ reg = VFE_0_RDI_CFG_x_MIPI_EN_BITS;
+ reg |= VFE_0_RDI_CFG_x_RDI_Mr_FRAME_BASED_EN(id);
+ vfe_reg_set(vfe, VFE_0_RDI_CFG_x(0), reg);
+
+ reg = VFE_0_RDI_CFG_x_RDI_EN_BIT;
+ reg |= ((3 * id) << VFE_0_RDI_CFG_x_RDI_STREAM_SEL_SHIFT) &
+ VFE_0_RDI_CFG_x_RDI_STREAM_SEL_MASK;
+ vfe_reg_set(vfe, VFE_0_RDI_CFG_x(id), reg);
+
+ switch (id) {
+ case VFE_LINE_RDI0:
+ default:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI0 <<
+ VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
+ break;
+ case VFE_LINE_RDI1:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI1 <<
+ VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
+ break;
+ case VFE_LINE_RDI2:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI2 <<
+ VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
+ break;
+ }
+
+ if (wm % 2 == 1)
+ reg <<= 16;
+
+ vfe_reg_set(vfe, VFE_0_BUS_XBAR_CFG_x(wm), reg);
+}
+
+static void vfe_wm_set_subsample(struct vfe_device *vfe, u8 wm)
+{
+ writel_relaxed(VFE_0_BUS_IMAGE_MASTER_n_WR_IRQ_SUBSAMPLE_PATTERN_DEF,
+ vfe->base +
+ VFE_0_BUS_IMAGE_MASTER_n_WR_IRQ_SUBSAMPLE_PATTERN(wm));
+}
+
+static void vfe_bus_disconnect_wm_from_rdi(struct vfe_device *vfe, u8 wm,
+ enum vfe_line_id id)
+{
+ u32 reg;
+
+ reg = VFE_0_RDI_CFG_x_RDI_Mr_FRAME_BASED_EN(id);
+ vfe_reg_clr(vfe, VFE_0_RDI_CFG_x(0), reg);
+
+ reg = VFE_0_RDI_CFG_x_RDI_EN_BIT;
+ vfe_reg_clr(vfe, VFE_0_RDI_CFG_x(id), reg);
+
+ switch (id) {
+ case VFE_LINE_RDI0:
+ default:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI0 <<
+ VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
+ break;
+ case VFE_LINE_RDI1:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI1 <<
+ VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
+ break;
+ case VFE_LINE_RDI2:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI2 <<
+ VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
+ break;
+ }
+
+ if (wm % 2 == 1)
+ reg <<= 16;
+
+ vfe_reg_clr(vfe, VFE_0_BUS_XBAR_CFG_x(wm), reg);
+}
+
+static void vfe_set_xbar_cfg(struct vfe_device *vfe, struct vfe_output *output,
+ u8 enable)
+{
+ struct vfe_line *line = container_of(output, struct vfe_line, output);
+ u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
+ u32 reg;
+ unsigned int i;
+
+ for (i = 0; i < output->wm_num; i++) {
+ if (i == 0) {
+ reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_LUMA <<
+ VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
+ } else if (i == 1) {
+ reg = VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_EN;
+ if (p == V4L2_PIX_FMT_NV12 || p == V4L2_PIX_FMT_NV16)
+ reg |= VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTER_INTRA;
+ } else {
+ /* On current devices output->wm_num is always <= 2 */
+ break;
+ }
+
+ if (output->wm_idx[i] % 2 == 1)
+ reg <<= 16;
+
+ if (enable)
+ vfe_reg_set(vfe,
+ VFE_0_BUS_XBAR_CFG_x(output->wm_idx[i]),
+ reg);
+ else
+ vfe_reg_clr(vfe,
+ VFE_0_BUS_XBAR_CFG_x(output->wm_idx[i]),
+ reg);
+ }
+}
+
+static void vfe_set_rdi_cid(struct vfe_device *vfe, enum vfe_line_id id, u8 cid)
+{
+ vfe_reg_clr(vfe, VFE_0_RDI_CFG_x(id),
+ VFE_0_RDI_CFG_x_RDI_M0_SEL_MASK);
+
+ vfe_reg_set(vfe, VFE_0_RDI_CFG_x(id),
+ cid << VFE_0_RDI_CFG_x_RDI_M0_SEL_SHIFT);
+}
+
+static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+ vfe->reg_update |= VFE_0_REG_UPDATE_line_n(line_id);
+ wmb();
+ writel_relaxed(vfe->reg_update, vfe->base + VFE_0_REG_UPDATE);
+ wmb();
+}
+
+static void vfe_enable_irq_wm_line(struct vfe_device *vfe, u8 wm,
+ enum vfe_line_id line_id, u8 enable)
+{
+ u32 irq_en0 = VFE_0_IRQ_MASK_0_IMAGE_MASTER_n_PING_PONG(wm) |
+ VFE_0_IRQ_MASK_0_line_n_REG_UPDATE(line_id);
+ u32 irq_en1 = VFE_0_IRQ_MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(wm) |
+ VFE_0_IRQ_MASK_1_RDIn_SOF(line_id);
+
+ if (enable) {
+ vfe_reg_set(vfe, VFE_0_IRQ_MASK_0, irq_en0);
+ vfe_reg_set(vfe, VFE_0_IRQ_MASK_1, irq_en1);
+ } else {
+ vfe_reg_clr(vfe, VFE_0_IRQ_MASK_0, irq_en0);
+ vfe_reg_clr(vfe, VFE_0_IRQ_MASK_1, irq_en1);
+ }
+}
+
+static void vfe_enable_irq_pix_line(struct vfe_device *vfe, u8 comp,
+ enum vfe_line_id line_id, u8 enable)
+{
+ struct vfe_output *output = &vfe->line[line_id].output;
+ unsigned int i;
+ u32 irq_en0;
+ u32 irq_en1;
+ u32 comp_mask = 0;
+
+ irq_en0 = VFE_0_IRQ_MASK_0_CAMIF_SOF;
+ irq_en0 |= VFE_0_IRQ_MASK_0_CAMIF_EOF;
+ irq_en0 |= VFE_0_IRQ_MASK_0_IMAGE_COMPOSITE_DONE_n(comp);
+ irq_en0 |= VFE_0_IRQ_MASK_0_line_n_REG_UPDATE(line_id);
+ irq_en1 = VFE_0_IRQ_MASK_1_CAMIF_ERROR;
+ for (i = 0; i < output->wm_num; i++) {
+ irq_en1 |= VFE_0_IRQ_MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(
+ output->wm_idx[i]);
+ comp_mask |= (1 << output->wm_idx[i]) << comp * 8;
+ }
+
+ if (enable) {
+ vfe_reg_set(vfe, VFE_0_IRQ_MASK_0, irq_en0);
+ vfe_reg_set(vfe, VFE_0_IRQ_MASK_1, irq_en1);
+ vfe_reg_set(vfe, VFE_0_IRQ_COMPOSITE_MASK_0, comp_mask);
+ } else {
+ vfe_reg_clr(vfe, VFE_0_IRQ_MASK_0, irq_en0);
+ vfe_reg_clr(vfe, VFE_0_IRQ_MASK_1, irq_en1);
+ vfe_reg_clr(vfe, VFE_0_IRQ_COMPOSITE_MASK_0, comp_mask);
+ }
+}
+
+static void vfe_enable_irq_common(struct vfe_device *vfe)
+{
+ u32 irq_en0 = VFE_0_IRQ_MASK_0_RESET_ACK;
+ u32 irq_en1 = VFE_0_IRQ_MASK_1_VIOLATION |
+ VFE_0_IRQ_MASK_1_BUS_BDG_HALT_ACK;
+
+ vfe_reg_set(vfe, VFE_0_IRQ_MASK_0, irq_en0);
+ vfe_reg_set(vfe, VFE_0_IRQ_MASK_1, irq_en1);
+}
+
+static void vfe_set_demux_cfg(struct vfe_device *vfe, struct vfe_line *line)
+{
+ u32 val, even_cfg, odd_cfg;
+
+ writel_relaxed(VFE_0_DEMUX_CFG_PERIOD, vfe->base + VFE_0_DEMUX_CFG);
+
+ val = VFE_0_DEMUX_GAIN_0_CH0_EVEN | VFE_0_DEMUX_GAIN_0_CH0_ODD;
+ writel_relaxed(val, vfe->base + VFE_0_DEMUX_GAIN_0);
+
+ val = VFE_0_DEMUX_GAIN_1_CH1 | VFE_0_DEMUX_GAIN_1_CH2;
+ writel_relaxed(val, vfe->base + VFE_0_DEMUX_GAIN_1);
+
+ switch (line->fmt[MSM_VFE_PAD_SINK].code) {
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ even_cfg = VFE_0_DEMUX_EVEN_CFG_PATTERN_YUYV;
+ odd_cfg = VFE_0_DEMUX_ODD_CFG_PATTERN_YUYV;
+ break;
+ case MEDIA_BUS_FMT_YVYU8_2X8:
+ even_cfg = VFE_0_DEMUX_EVEN_CFG_PATTERN_YVYU;
+ odd_cfg = VFE_0_DEMUX_ODD_CFG_PATTERN_YVYU;
+ break;
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ default:
+ even_cfg = VFE_0_DEMUX_EVEN_CFG_PATTERN_UYVY;
+ odd_cfg = VFE_0_DEMUX_ODD_CFG_PATTERN_UYVY;
+ break;
+ case MEDIA_BUS_FMT_VYUY8_2X8:
+ even_cfg = VFE_0_DEMUX_EVEN_CFG_PATTERN_VYUY;
+ odd_cfg = VFE_0_DEMUX_ODD_CFG_PATTERN_VYUY;
+ break;
+ }
+
+ writel_relaxed(even_cfg, vfe->base + VFE_0_DEMUX_EVEN_CFG);
+ writel_relaxed(odd_cfg, vfe->base + VFE_0_DEMUX_ODD_CFG);
+}
+
+static inline u8 vfe_calc_interp_reso(u16 input, u16 output)
+{
+ if (input / output >= 16)
+ return 0;
+
+ if (input / output >= 8)
+ return 1;
+
+ if (input / output >= 4)
+ return 2;
+
+ return 3;
+}
+
+static void vfe_set_scale_cfg(struct vfe_device *vfe, struct vfe_line *line)
+{
+ u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
+ u32 reg;
+ u16 input, output;
+ u8 interp_reso;
+ u32 phase_mult;
+
+ writel_relaxed(0x3, vfe->base + VFE_0_SCALE_ENC_Y_CFG);
+
+ input = line->fmt[MSM_VFE_PAD_SINK].width;
+ output = line->compose.width;
+ reg = (output << 16) | input;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_H_IMAGE_SIZE);
+
+ interp_reso = vfe_calc_interp_reso(input, output);
+ phase_mult = input * (1 << (13 + interp_reso)) / output;
+ reg = (interp_reso << 20) | phase_mult;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_H_PHASE);
+
+ input = line->fmt[MSM_VFE_PAD_SINK].height;
+ output = line->compose.height;
+ reg = (output << 16) | input;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_V_IMAGE_SIZE);
+
+ interp_reso = vfe_calc_interp_reso(input, output);
+ phase_mult = input * (1 << (13 + interp_reso)) / output;
+ reg = (interp_reso << 20) | phase_mult;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_V_PHASE);
+
+ writel_relaxed(0x3, vfe->base + VFE_0_SCALE_ENC_CBCR_CFG);
+
+ input = line->fmt[MSM_VFE_PAD_SINK].width;
+ output = line->compose.width / 2;
+ reg = (output << 16) | input;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_H_IMAGE_SIZE);
+
+ interp_reso = vfe_calc_interp_reso(input, output);
+ phase_mult = input * (1 << (13 + interp_reso)) / output;
+ reg = (interp_reso << 20) | phase_mult;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_H_PHASE);
+
+ input = line->fmt[MSM_VFE_PAD_SINK].height;
+ output = line->compose.height;
+ if (p == V4L2_PIX_FMT_NV12 || p == V4L2_PIX_FMT_NV21)
+ output = line->compose.height / 2;
+ reg = (output << 16) | input;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_V_IMAGE_SIZE);
+
+ interp_reso = vfe_calc_interp_reso(input, output);
+ phase_mult = input * (1 << (13 + interp_reso)) / output;
+ reg = (interp_reso << 20) | phase_mult;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_V_PHASE);
+}
+
+static void vfe_set_crop_cfg(struct vfe_device *vfe, struct vfe_line *line)
+{
+ u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
+ u32 reg;
+ u16 first, last;
+
+ first = line->crop.left;
+ last = line->crop.left + line->crop.width - 1;
+ reg = (first << 16) | last;
+ writel_relaxed(reg, vfe->base + VFE_0_CROP_ENC_Y_WIDTH);
+
+ first = line->crop.top;
+ last = line->crop.top + line->crop.height - 1;
+ reg = (first << 16) | last;
+ writel_relaxed(reg, vfe->base + VFE_0_CROP_ENC_Y_HEIGHT);
+
+ first = line->crop.left / 2;
+ last = line->crop.left / 2 + line->crop.width / 2 - 1;
+ reg = (first << 16) | last;
+ writel_relaxed(reg, vfe->base + VFE_0_CROP_ENC_CBCR_WIDTH);
+
+ first = line->crop.top;
+ last = line->crop.top + line->crop.height - 1;
+ if (p == V4L2_PIX_FMT_NV12 || p == V4L2_PIX_FMT_NV21) {
+ first = line->crop.top / 2;
+ last = line->crop.top / 2 + line->crop.height / 2 - 1;
+ }
+ reg = (first << 16) | last;
+ writel_relaxed(reg, vfe->base + VFE_0_CROP_ENC_CBCR_HEIGHT);
+}
+
+static void vfe_set_clamp_cfg(struct vfe_device *vfe)
+{
+ u32 val = VFE_0_CLAMP_ENC_MAX_CFG_CH0 |
+ VFE_0_CLAMP_ENC_MAX_CFG_CH1 |
+ VFE_0_CLAMP_ENC_MAX_CFG_CH2;
+
+ writel_relaxed(val, vfe->base + VFE_0_CLAMP_ENC_MAX_CFG);
+
+ val = VFE_0_CLAMP_ENC_MIN_CFG_CH0 |
+ VFE_0_CLAMP_ENC_MIN_CFG_CH1 |
+ VFE_0_CLAMP_ENC_MIN_CFG_CH2;
+
+ writel_relaxed(val, vfe->base + VFE_0_CLAMP_ENC_MIN_CFG);
+}
+
+/*
+ * vfe_reset - Trigger reset on VFE module and wait to complete
+ * @vfe: VFE device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_reset(struct vfe_device *vfe)
+{
+ unsigned long time;
+
+ reinit_completion(&vfe->reset_complete);
+
+ vfe_global_reset(vfe);
+
+ time = wait_for_completion_timeout(&vfe->reset_complete,
+ msecs_to_jiffies(VFE_RESET_TIMEOUT_MS));
+ if (!time) {
+ dev_err(to_device(vfe), "VFE reset timeout\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/*
+ * vfe_halt - Trigger halt on VFE module and wait to complete
+ * @vfe: VFE device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_halt(struct vfe_device *vfe)
+{
+ unsigned long time;
+
+ reinit_completion(&vfe->halt_complete);
+
+ writel_relaxed(VFE_0_BUS_BDG_CMD_HALT_REQ,
+ vfe->base + VFE_0_BUS_BDG_CMD);
+
+ time = wait_for_completion_timeout(&vfe->halt_complete,
+ msecs_to_jiffies(VFE_HALT_TIMEOUT_MS));
+ if (!time) {
+ dev_err(to_device(vfe), "VFE halt timeout\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void vfe_init_outputs(struct vfe_device *vfe)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(vfe->line); i++) {
+ struct vfe_output *output = &vfe->line[i].output;
+
+ output->state = VFE_OUTPUT_OFF;
+ output->buf[0] = NULL;
+ output->buf[1] = NULL;
+ INIT_LIST_HEAD(&output->pending_bufs);
+
+ output->wm_num = 1;
+ if (vfe->line[i].id == VFE_LINE_PIX)
+ output->wm_num = 2;
+ }
+}
+
+static void vfe_reset_output_maps(struct vfe_device *vfe)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(vfe->wm_output_map); i++)
+ vfe->wm_output_map[i] = VFE_LINE_NONE;
+}
+
+static void vfe_set_qos(struct vfe_device *vfe)
+{
+ u32 val = VFE_0_BUS_BDG_QOS_CFG_0_CFG;
+ u32 val7 = VFE_0_BUS_BDG_QOS_CFG_7_CFG;
+
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_0);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_1);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_2);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_3);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_4);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_5);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_6);
+ writel_relaxed(val7, vfe->base + VFE_0_BUS_BDG_QOS_CFG_7);
+}
+
+static void vfe_set_cgc_override(struct vfe_device *vfe, u8 wm, u8 enable)
+{
+ u32 val = VFE_0_CGC_OVERRIDE_1_IMAGE_Mx_CGC_OVERRIDE(wm);
+
+ if (enable)
+ vfe_reg_set(vfe, VFE_0_CGC_OVERRIDE_1, val);
+ else
+ vfe_reg_clr(vfe, VFE_0_CGC_OVERRIDE_1, val);
+
+ wmb();
+}
+
+static void vfe_set_module_cfg(struct vfe_device *vfe, u8 enable)
+{
+ u32 val = VFE_0_MODULE_CFG_DEMUX |
+ VFE_0_MODULE_CFG_CHROMA_UPSAMPLE |
+ VFE_0_MODULE_CFG_SCALE_ENC |
+ VFE_0_MODULE_CFG_CROP_ENC;
+
+ if (enable)
+ writel_relaxed(val, vfe->base + VFE_0_MODULE_CFG);
+ else
+ writel_relaxed(0x0, vfe->base + VFE_0_MODULE_CFG);
+}
+
+static void vfe_set_camif_cfg(struct vfe_device *vfe, struct vfe_line *line)
+{
+ u32 val;
+
+ switch (line->fmt[MSM_VFE_PAD_SINK].code) {
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ val = VFE_0_CORE_CFG_PIXEL_PATTERN_YCBYCR;
+ break;
+ case MEDIA_BUS_FMT_YVYU8_2X8:
+ val = VFE_0_CORE_CFG_PIXEL_PATTERN_YCRYCB;
+ break;
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ default:
+ val = VFE_0_CORE_CFG_PIXEL_PATTERN_CBYCRY;
+ break;
+ case MEDIA_BUS_FMT_VYUY8_2X8:
+ val = VFE_0_CORE_CFG_PIXEL_PATTERN_CRYCBY;
+ break;
+ }
+
+ writel_relaxed(val, vfe->base + VFE_0_CORE_CFG);
+
+ val = line->fmt[MSM_VFE_PAD_SINK].width * 2;
+ val |= line->fmt[MSM_VFE_PAD_SINK].height << 16;
+ writel_relaxed(val, vfe->base + VFE_0_CAMIF_FRAME_CFG);
+
+ val = line->fmt[MSM_VFE_PAD_SINK].width * 2 - 1;
+ writel_relaxed(val, vfe->base + VFE_0_CAMIF_WINDOW_WIDTH_CFG);
+
+ val = line->fmt[MSM_VFE_PAD_SINK].height - 1;
+ writel_relaxed(val, vfe->base + VFE_0_CAMIF_WINDOW_HEIGHT_CFG);
+
+ val = 0xffffffff;
+ writel_relaxed(val, vfe->base + VFE_0_CAMIF_SUBSAMPLE_CFG_0);
+
+ val = 0xffffffff;
+ writel_relaxed(val, vfe->base + VFE_0_CAMIF_IRQ_SUBSAMPLE_PATTERN);
+
+ val = VFE_0_RDI_CFG_x_MIPI_EN_BITS;
+ vfe_reg_set(vfe, VFE_0_RDI_CFG_x(0), val);
+
+ val = VFE_0_CAMIF_CFG_VFE_OUTPUT_EN;
+ writel_relaxed(val, vfe->base + VFE_0_CAMIF_CFG);
+}
+
+static void vfe_set_camif_cmd(struct vfe_device *vfe, u32 cmd)
+{
+ writel_relaxed(VFE_0_CAMIF_CMD_CLEAR_CAMIF_STATUS,
+ vfe->base + VFE_0_CAMIF_CMD);
+
+ writel_relaxed(cmd, vfe->base + VFE_0_CAMIF_CMD);
+}
+
+static int vfe_camif_wait_for_stop(struct vfe_device *vfe)
+{
+ u32 val;
+ int ret;
+
+ ret = readl_poll_timeout(vfe->base + VFE_0_CAMIF_STATUS,
+ val,
+ (val & VFE_0_CAMIF_STATUS_HALT),
+ CAMIF_TIMEOUT_SLEEP_US,
+ CAMIF_TIMEOUT_ALL_US);
+ if (ret < 0)
+ dev_err(to_device(vfe), "%s: camif stop timeout\n", __func__);
+
+ return ret;
+}
+
+static void vfe_output_init_addrs(struct vfe_device *vfe,
+ struct vfe_output *output, u8 sync)
+{
+ u32 ping_addr;
+ u32 pong_addr;
+ unsigned int i;
+
+ output->active_buf = 0;
+
+ for (i = 0; i < output->wm_num; i++) {
+ if (output->buf[0])
+ ping_addr = output->buf[0]->addr[i];
+ else
+ ping_addr = 0;
+
+ if (output->buf[1])
+ pong_addr = output->buf[1]->addr[i];
+ else
+ pong_addr = ping_addr;
+
+ vfe_wm_set_ping_addr(vfe, output->wm_idx[i], ping_addr);
+ vfe_wm_set_pong_addr(vfe, output->wm_idx[i], pong_addr);
+ if (sync)
+ vfe_bus_reload_wm(vfe, output->wm_idx[i]);
+ }
+}
+
+static void vfe_output_update_ping_addr(struct vfe_device *vfe,
+ struct vfe_output *output, u8 sync)
+{
+ u32 addr;
+ unsigned int i;
+
+ for (i = 0; i < output->wm_num; i++) {
+ if (output->buf[0])
+ addr = output->buf[0]->addr[i];
+ else
+ addr = 0;
+
+ vfe_wm_set_ping_addr(vfe, output->wm_idx[i], addr);
+ if (sync)
+ vfe_bus_reload_wm(vfe, output->wm_idx[i]);
+ }
+}
+
+static void vfe_output_update_pong_addr(struct vfe_device *vfe,
+ struct vfe_output *output, u8 sync)
+{
+ u32 addr;
+ unsigned int i;
+
+ for (i = 0; i < output->wm_num; i++) {
+ if (output->buf[1])
+ addr = output->buf[1]->addr[i];
+ else
+ addr = 0;
+
+ vfe_wm_set_pong_addr(vfe, output->wm_idx[i], addr);
+ if (sync)
+ vfe_bus_reload_wm(vfe, output->wm_idx[i]);
+ }
+
+}
+
+static int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+ int ret = -EBUSY;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(vfe->wm_output_map); i++) {
+ if (vfe->wm_output_map[i] == VFE_LINE_NONE) {
+ vfe->wm_output_map[i] = line_id;
+ ret = i;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int vfe_release_wm(struct vfe_device *vfe, u8 wm)
+{
+ if (wm >= ARRAY_SIZE(vfe->wm_output_map))
+ return -EINVAL;
+
+ vfe->wm_output_map[wm] = VFE_LINE_NONE;
+
+ return 0;
+}
+
+static void vfe_output_frame_drop(struct vfe_device *vfe,
+ struct vfe_output *output,
+ u32 drop_pattern)
+{
+ u8 drop_period;
+ unsigned int i;
+
+ /* We need to toggle update period to be valid on next frame */
+ output->drop_update_idx++;
+ output->drop_update_idx %= VFE_FRAME_DROP_UPDATES;
+ drop_period = VFE_FRAME_DROP_VAL + output->drop_update_idx;
+
+ for (i = 0; i < output->wm_num; i++) {
+ vfe_wm_set_framedrop_period(vfe, output->wm_idx[i],
+ drop_period);
+ vfe_wm_set_framedrop_pattern(vfe, output->wm_idx[i],
+ drop_pattern);
+ }
+ vfe_reg_update(vfe, container_of(output, struct vfe_line, output)->id);
+}
+
+static struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output)
+{
+ struct camss_buffer *buffer = NULL;
+
+ if (!list_empty(&output->pending_bufs)) {
+ buffer = list_first_entry(&output->pending_bufs,
+ struct camss_buffer,
+ queue);
+ list_del(&buffer->queue);
+ }
+
+ return buffer;
+}
+
+/*
+ * vfe_buf_add_pending - Add output buffer to list of pending
+ * @output: VFE output
+ * @buffer: Video buffer
+ */
+static void vfe_buf_add_pending(struct vfe_output *output,
+ struct camss_buffer *buffer)
+{
+ INIT_LIST_HEAD(&buffer->queue);
+ list_add_tail(&buffer->queue, &output->pending_bufs);
+}
+
+/*
+ * vfe_buf_flush_pending - Flush all pending buffers.
+ * @output: VFE output
+ * @state: vb2 buffer state
+ */
+static void vfe_buf_flush_pending(struct vfe_output *output,
+ enum vb2_buffer_state state)
+{
+ struct camss_buffer *buf;
+ struct camss_buffer *t;
+
+ list_for_each_entry_safe(buf, t, &output->pending_bufs, queue) {
+ vb2_buffer_done(&buf->vb.vb2_buf, state);
+ list_del(&buf->queue);
+ }
+}
+
+static void vfe_buf_update_wm_on_next(struct vfe_device *vfe,
+ struct vfe_output *output)
+{
+ switch (output->state) {
+ case VFE_OUTPUT_CONTINUOUS:
+ vfe_output_frame_drop(vfe, output, 3);
+ break;
+ case VFE_OUTPUT_SINGLE:
+ default:
+ dev_err_ratelimited(to_device(vfe),
+ "Next buf in wrong state! %d\n",
+ output->state);
+ break;
+ }
+}
+
+static void vfe_buf_update_wm_on_last(struct vfe_device *vfe,
+ struct vfe_output *output)
+{
+ switch (output->state) {
+ case VFE_OUTPUT_CONTINUOUS:
+ output->state = VFE_OUTPUT_SINGLE;
+ vfe_output_frame_drop(vfe, output, 1);
+ break;
+ case VFE_OUTPUT_SINGLE:
+ output->state = VFE_OUTPUT_STOPPING;
+ vfe_output_frame_drop(vfe, output, 0);
+ break;
+ default:
+ dev_err_ratelimited(to_device(vfe),
+ "Last buff in wrong state! %d\n",
+ output->state);
+ break;
+ }
+}
+
+static void vfe_buf_update_wm_on_new(struct vfe_device *vfe,
+ struct vfe_output *output,
+ struct camss_buffer *new_buf)
+{
+ int inactive_idx;
+
+ switch (output->state) {
+ case VFE_OUTPUT_SINGLE:
+ inactive_idx = !output->active_buf;
+
+ if (!output->buf[inactive_idx]) {
+ output->buf[inactive_idx] = new_buf;
+
+ if (inactive_idx)
+ vfe_output_update_pong_addr(vfe, output, 0);
+ else
+ vfe_output_update_ping_addr(vfe, output, 0);
+
+ vfe_output_frame_drop(vfe, output, 3);
+ output->state = VFE_OUTPUT_CONTINUOUS;
+ } else {
+ vfe_buf_add_pending(output, new_buf);
+ dev_err_ratelimited(to_device(vfe),
+ "Inactive buffer is busy\n");
+ }
+ break;
+
+ case VFE_OUTPUT_IDLE:
+ if (!output->buf[0]) {
+ output->buf[0] = new_buf;
+
+ vfe_output_init_addrs(vfe, output, 1);
+
+ vfe_output_frame_drop(vfe, output, 1);
+ output->state = VFE_OUTPUT_SINGLE;
+ } else {
+ vfe_buf_add_pending(output, new_buf);
+ dev_err_ratelimited(to_device(vfe),
+ "Output idle with buffer set!\n");
+ }
+ break;
+
+ case VFE_OUTPUT_CONTINUOUS:
+ default:
+ vfe_buf_add_pending(output, new_buf);
+ break;
+ }
+}
+
+static int vfe_get_output(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output;
+ unsigned long flags;
+ int i;
+ int wm_idx;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ output = &line->output;
+ if (output->state != VFE_OUTPUT_OFF) {
+ dev_err(to_device(vfe), "Output is running\n");
+ goto error;
+ }
+ output->state = VFE_OUTPUT_RESERVED;
+
+ output->active_buf = 0;
+
+ for (i = 0; i < output->wm_num; i++) {
+ wm_idx = vfe_reserve_wm(vfe, line->id);
+ if (wm_idx < 0) {
+ dev_err(to_device(vfe), "Can not reserve wm\n");
+ goto error_get_wm;
+ }
+ output->wm_idx[i] = wm_idx;
+ }
+
+ output->drop_update_idx = 0;
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return 0;
+
+error_get_wm:
+ for (i--; i >= 0; i--)
+ vfe_release_wm(vfe, output->wm_idx[i]);
+ output->state = VFE_OUTPUT_OFF;
+error:
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return -EINVAL;
+}
+
+static int vfe_put_output(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output = &line->output;
+ unsigned long flags;
+ unsigned int i;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ for (i = 0; i < output->wm_num; i++)
+ vfe_release_wm(vfe, output->wm_idx[i]);
+
+ output->state = VFE_OUTPUT_OFF;
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+ return 0;
+}
+
+static int vfe_enable_output(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output = &line->output;
+ unsigned long flags;
+ unsigned int i;
+ u16 ub_size;
+
+ switch (vfe->id) {
+ case 0:
+ ub_size = MSM_VFE_VFE0_UB_SIZE_RDI;
+ break;
+ case 1:
+ ub_size = MSM_VFE_VFE1_UB_SIZE_RDI;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ vfe->reg_update &= ~VFE_0_REG_UPDATE_line_n(line->id);
+
+ if (output->state != VFE_OUTPUT_RESERVED) {
+ dev_err(to_device(vfe), "Output is not in reserved state %d\n",
+ output->state);
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+ return -EINVAL;
+ }
+ output->state = VFE_OUTPUT_IDLE;
+
+ output->buf[0] = vfe_buf_get_pending(output);
+ output->buf[1] = vfe_buf_get_pending(output);
+
+ if (!output->buf[0] && output->buf[1]) {
+ output->buf[0] = output->buf[1];
+ output->buf[1] = NULL;
+ }
+
+ if (output->buf[0])
+ output->state = VFE_OUTPUT_SINGLE;
+
+ if (output->buf[1])
+ output->state = VFE_OUTPUT_CONTINUOUS;
+
+ switch (output->state) {
+ case VFE_OUTPUT_SINGLE:
+ vfe_output_frame_drop(vfe, output, 1);
+ break;
+ case VFE_OUTPUT_CONTINUOUS:
+ vfe_output_frame_drop(vfe, output, 3);
+ break;
+ default:
+ vfe_output_frame_drop(vfe, output, 0);
+ break;
+ }
+
+ output->sequence = 0;
+ output->wait_sof = 0;
+ output->wait_reg_update = 0;
+ reinit_completion(&output->sof);
+ reinit_completion(&output->reg_update);
+
+ vfe_output_init_addrs(vfe, output, 0);
+
+ if (line->id != VFE_LINE_PIX) {
+ vfe_set_cgc_override(vfe, output->wm_idx[0], 1);
+ vfe_enable_irq_wm_line(vfe, output->wm_idx[0], line->id, 1);
+ vfe_bus_connect_wm_to_rdi(vfe, output->wm_idx[0], line->id);
+ vfe_wm_set_subsample(vfe, output->wm_idx[0]);
+ vfe_set_rdi_cid(vfe, line->id, 0);
+ vfe_wm_set_ub_cfg(vfe, output->wm_idx[0],
+ (ub_size + 1) * output->wm_idx[0], ub_size);
+ vfe_wm_frame_based(vfe, output->wm_idx[0], 1);
+ vfe_wm_enable(vfe, output->wm_idx[0], 1);
+ vfe_bus_reload_wm(vfe, output->wm_idx[0]);
+ } else {
+ ub_size /= output->wm_num;
+ for (i = 0; i < output->wm_num; i++) {
+ vfe_set_cgc_override(vfe, output->wm_idx[i], 1);
+ vfe_wm_set_subsample(vfe, output->wm_idx[i]);
+ vfe_wm_set_ub_cfg(vfe, output->wm_idx[i],
+ (ub_size + 1) * output->wm_idx[i],
+ ub_size);
+ vfe_wm_line_based(vfe, output->wm_idx[i],
+ &line->video_out.active_fmt.fmt.pix_mp,
+ i, 1);
+ vfe_wm_enable(vfe, output->wm_idx[i], 1);
+ vfe_bus_reload_wm(vfe, output->wm_idx[i]);
+ }
+ vfe_enable_irq_pix_line(vfe, 0, line->id, 1);
+ vfe_set_module_cfg(vfe, 1);
+ vfe_set_camif_cfg(vfe, line);
+ vfe_set_xbar_cfg(vfe, output, 1);
+ vfe_set_demux_cfg(vfe, line);
+ vfe_set_scale_cfg(vfe, line);
+ vfe_set_crop_cfg(vfe, line);
+ vfe_set_clamp_cfg(vfe);
+ vfe_set_camif_cmd(vfe, VFE_0_CAMIF_CMD_ENABLE_FRAME_BOUNDARY);
+ }
+
+ vfe_reg_update(vfe, line->id);
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return 0;
+}
+
+static int vfe_disable_output(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output = &line->output;
+ unsigned long flags;
+ unsigned long time;
+ unsigned int i;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ output->wait_sof = 1;
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ time = wait_for_completion_timeout(&output->sof,
+ msecs_to_jiffies(VFE_NEXT_SOF_MS));
+ if (!time)
+ dev_err(to_device(vfe), "VFE sof timeout\n");
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+ for (i = 0; i < output->wm_num; i++)
+ vfe_wm_enable(vfe, output->wm_idx[i], 0);
+
+ vfe_reg_update(vfe, line->id);
+ output->wait_reg_update = 1;
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ time = wait_for_completion_timeout(&output->reg_update,
+ msecs_to_jiffies(VFE_NEXT_SOF_MS));
+ if (!time)
+ dev_err(to_device(vfe), "VFE reg update timeout\n");
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ if (line->id != VFE_LINE_PIX) {
+ vfe_wm_frame_based(vfe, output->wm_idx[0], 0);
+ vfe_bus_disconnect_wm_from_rdi(vfe, output->wm_idx[0], line->id);
+ vfe_enable_irq_wm_line(vfe, output->wm_idx[0], line->id, 0);
+ vfe_set_cgc_override(vfe, output->wm_idx[0], 0);
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+ } else {
+ for (i = 0; i < output->wm_num; i++) {
+ vfe_wm_line_based(vfe, output->wm_idx[i], NULL, i, 0);
+ vfe_set_cgc_override(vfe, output->wm_idx[i], 0);
+ }
+
+ vfe_enable_irq_pix_line(vfe, 0, line->id, 0);
+ vfe_set_module_cfg(vfe, 0);
+ vfe_set_xbar_cfg(vfe, output, 0);
+
+ vfe_set_camif_cmd(vfe, VFE_0_CAMIF_CMD_DISABLE_FRAME_BOUNDARY);
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ vfe_camif_wait_for_stop(vfe);
+ }
+
+ return 0;
+}
+
+/*
+ * vfe_enable - Enable streaming on VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_enable(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ int ret;
+
+ mutex_lock(&vfe->stream_lock);
+
+ if (!vfe->stream_count) {
+ vfe_enable_irq_common(vfe);
+
+ vfe_bus_enable_wr_if(vfe, 1);
+
+ vfe_set_qos(vfe);
+ }
+
+ vfe->stream_count++;
+
+ mutex_unlock(&vfe->stream_lock);
+
+ ret = vfe_get_output(line);
+ if (ret < 0)
+ goto error_get_output;
+
+ ret = vfe_enable_output(line);
+ if (ret < 0)
+ goto error_enable_output;
+
+ vfe->was_streaming = 1;
+
+ return 0;
+
+
+error_enable_output:
+ vfe_put_output(line);
+
+error_get_output:
+ mutex_lock(&vfe->stream_lock);
+
+ if (vfe->stream_count == 1)
+ vfe_bus_enable_wr_if(vfe, 0);
+
+ vfe->stream_count--;
+
+ mutex_unlock(&vfe->stream_lock);
+
+ return ret;
+}
+
+/*
+ * vfe_disable - Disable streaming on VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_disable(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+
+ vfe_disable_output(line);
+
+ vfe_put_output(line);
+
+ mutex_lock(&vfe->stream_lock);
+
+ if (vfe->stream_count == 1)
+ vfe_bus_enable_wr_if(vfe, 0);
+
+ vfe->stream_count--;
+
+ mutex_unlock(&vfe->stream_lock);
+
+ return 0;
+}
+
+/*
+ * vfe_isr_sof - Process start of frame interrupt
+ * @vfe: VFE Device
+ * @line_id: VFE line
+ */
+static void vfe_isr_sof(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+ struct vfe_output *output;
+ unsigned long flags;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+ output = &vfe->line[line_id].output;
+ if (output->wait_sof) {
+ output->wait_sof = 0;
+ complete(&output->sof);
+ }
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+}
+
+/*
+ * vfe_isr_reg_update - Process reg update interrupt
+ * @vfe: VFE Device
+ * @line_id: VFE line
+ */
+static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+ struct vfe_output *output;
+ unsigned long flags;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+ vfe->reg_update &= ~VFE_0_REG_UPDATE_line_n(line_id);
+
+ output = &vfe->line[line_id].output;
+
+ if (output->wait_reg_update) {
+ output->wait_reg_update = 0;
+ complete(&output->reg_update);
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+ return;
+ }
+
+ if (output->state == VFE_OUTPUT_STOPPING) {
+ /* Release last buffer when hw is idle */
+ if (output->last_buffer) {
+ vb2_buffer_done(&output->last_buffer->vb.vb2_buf,
+ VB2_BUF_STATE_DONE);
+ output->last_buffer = NULL;
+ }
+ output->state = VFE_OUTPUT_IDLE;
+
+ /* Buffers received in stopping state are queued in */
+ /* dma pending queue, start next capture here */
+
+ output->buf[0] = vfe_buf_get_pending(output);
+ output->buf[1] = vfe_buf_get_pending(output);
+
+ if (!output->buf[0] && output->buf[1]) {
+ output->buf[0] = output->buf[1];
+ output->buf[1] = NULL;
+ }
+
+ if (output->buf[0])
+ output->state = VFE_OUTPUT_SINGLE;
+
+ if (output->buf[1])
+ output->state = VFE_OUTPUT_CONTINUOUS;
+
+ switch (output->state) {
+ case VFE_OUTPUT_SINGLE:
+ vfe_output_frame_drop(vfe, output, 2);
+ break;
+ case VFE_OUTPUT_CONTINUOUS:
+ vfe_output_frame_drop(vfe, output, 3);
+ break;
+ default:
+ vfe_output_frame_drop(vfe, output, 0);
+ break;
+ }
+
+ vfe_output_init_addrs(vfe, output, 1);
+ }
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+}
+
+/*
+ * vfe_isr_wm_done - Process write master done interrupt
+ * @vfe: VFE Device
+ * @wm: Write master id
+ */
+static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
+{
+ struct camss_buffer *ready_buf;
+ struct vfe_output *output;
+ dma_addr_t *new_addr;
+ unsigned long flags;
+ u32 active_index;
+ u64 ts = ktime_get_ns();
+ unsigned int i;
+
+ active_index = vfe_wm_get_ping_pong_status(vfe, wm);
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
+ dev_err_ratelimited(to_device(vfe),
+ "Received wm done for unmapped index\n");
+ goto out_unlock;
+ }
+ output = &vfe->line[vfe->wm_output_map[wm]].output;
+
+ if (output->active_buf == active_index) {
+ dev_err_ratelimited(to_device(vfe),
+ "Active buffer mismatch!\n");
+ goto out_unlock;
+ }
+ output->active_buf = active_index;
+
+ ready_buf = output->buf[!active_index];
+ if (!ready_buf) {
+ dev_err_ratelimited(to_device(vfe),
+ "Missing ready buf %d %d!\n",
+ !active_index, output->state);
+ goto out_unlock;
+ }
+
+ ready_buf->vb.vb2_buf.timestamp = ts;
+ ready_buf->vb.sequence = output->sequence++;
+
+ /* Get next buffer */
+ output->buf[!active_index] = vfe_buf_get_pending(output);
+ if (!output->buf[!active_index]) {
+ /* No next buffer - set same address */
+ new_addr = ready_buf->addr;
+ vfe_buf_update_wm_on_last(vfe, output);
+ } else {
+ new_addr = output->buf[!active_index]->addr;
+ vfe_buf_update_wm_on_next(vfe, output);
+ }
+
+ if (active_index)
+ for (i = 0; i < output->wm_num; i++)
+ vfe_wm_set_ping_addr(vfe, output->wm_idx[i],
+ new_addr[i]);
+ else
+ for (i = 0; i < output->wm_num; i++)
+ vfe_wm_set_pong_addr(vfe, output->wm_idx[i],
+ new_addr[i]);
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ if (output->state == VFE_OUTPUT_STOPPING)
+ output->last_buffer = ready_buf;
+ else
+ vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
+
+ return;
+
+out_unlock:
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+}
+
+/*
+ * vfe_isr_wm_done - Process composite image done interrupt
+ * @vfe: VFE Device
+ * @comp: Composite image id
+ */
+static void vfe_isr_comp_done(struct vfe_device *vfe, u8 comp)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(vfe->wm_output_map); i++)
+ if (vfe->wm_output_map[i] == VFE_LINE_PIX) {
+ vfe_isr_wm_done(vfe, i);
+ break;
+ }
+}
+
+/*
+ * vfe_isr - ISPIF module interrupt handler
+ * @irq: Interrupt line
+ * @dev: VFE device
+ *
+ * Return IRQ_HANDLED on success
+ */
+static irqreturn_t vfe_isr(int irq, void *dev)
+{
+ struct vfe_device *vfe = dev;
+ u32 value0, value1;
+ u32 violation;
+ int i, j;
+
+ value0 = readl_relaxed(vfe->base + VFE_0_IRQ_STATUS_0);
+ value1 = readl_relaxed(vfe->base + VFE_0_IRQ_STATUS_1);
+
+ writel_relaxed(value0, vfe->base + VFE_0_IRQ_CLEAR_0);
+ writel_relaxed(value1, vfe->base + VFE_0_IRQ_CLEAR_1);
+
+ wmb();
+ writel_relaxed(VFE_0_IRQ_CMD_GLOBAL_CLEAR, vfe->base + VFE_0_IRQ_CMD);
+
+ if (value0 & VFE_0_IRQ_STATUS_0_RESET_ACK)
+ complete(&vfe->reset_complete);
+
+ if (value1 & VFE_0_IRQ_STATUS_1_VIOLATION) {
+ violation = readl_relaxed(vfe->base + VFE_0_VIOLATION_STATUS);
+ dev_err_ratelimited(to_device(vfe),
+ "VFE: violation = 0x%08x\n", violation);
+ }
+
+ if (value1 & VFE_0_IRQ_STATUS_1_BUS_BDG_HALT_ACK) {
+ complete(&vfe->halt_complete);
+ writel_relaxed(0x0, vfe->base + VFE_0_BUS_BDG_CMD);
+ }
+
+ for (i = VFE_LINE_RDI0; i <= VFE_LINE_PIX; i++)
+ if (value0 & VFE_0_IRQ_STATUS_0_line_n_REG_UPDATE(i))
+ vfe_isr_reg_update(vfe, i);
+
+ if (value0 & VFE_0_IRQ_STATUS_0_CAMIF_SOF)
+ vfe_isr_sof(vfe, VFE_LINE_PIX);
+
+ for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
+ if (value1 & VFE_0_IRQ_STATUS_1_RDIn_SOF(i))
+ vfe_isr_sof(vfe, i);
+
+ for (i = 0; i < MSM_VFE_COMPOSITE_IRQ_NUM; i++)
+ if (value0 & VFE_0_IRQ_STATUS_0_IMAGE_COMPOSITE_DONE_n(i)) {
+ vfe_isr_comp_done(vfe, i);
+ for (j = 0; j < ARRAY_SIZE(vfe->wm_output_map); j++)
+ if (vfe->wm_output_map[j] == VFE_LINE_PIX)
+ value0 &= ~VFE_0_IRQ_MASK_0_IMAGE_MASTER_n_PING_PONG(j);
+ }
+
+ for (i = 0; i < MSM_VFE_IMAGE_MASTERS_NUM; i++)
+ if (value0 & VFE_0_IRQ_STATUS_0_IMAGE_MASTER_n_PING_PONG(i))
+ vfe_isr_wm_done(vfe, i);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * vfe_set_clock_rates - Calculate and set clock rates on VFE module
+ * @vfe: VFE device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_set_clock_rates(struct vfe_device *vfe)
+{
+ struct device *dev = to_device(vfe);
+ u32 pixel_clock[MSM_VFE_LINE_NUM];
+ int i, j;
+ int ret;
+
+ for (i = VFE_LINE_RDI0; i <= VFE_LINE_PIX; i++) {
+ ret = camss_get_pixel_clock(&vfe->line[i].subdev.entity,
+ &pixel_clock[i]);
+ if (ret)
+ pixel_clock[i] = 0;
+ }
+
+ for (i = 0; i < vfe->nclocks; i++) {
+ struct camss_clock *clock = &vfe->clock[i];
+
+ if (!strcmp(clock->name, "camss_vfe_vfe")) {
+ u64 min_rate = 0;
+ long rate;
+
+ for (j = VFE_LINE_RDI0; j <= VFE_LINE_PIX; j++) {
+ u32 tmp;
+ u8 bpp;
+
+ if (j == VFE_LINE_PIX) {
+ tmp = pixel_clock[j];
+ } else {
+ bpp = vfe_get_bpp(vfe->line[j].
+ fmt[MSM_VFE_PAD_SINK].code);
+ tmp = pixel_clock[j] * bpp / 64;
+ }
+
+ if (min_rate < tmp)
+ min_rate = tmp;
+ }
+
+ camss_add_clock_margin(&min_rate);
+
+ for (j = 0; j < clock->nfreqs; j++)
+ if (min_rate < clock->freq[j])
+ break;
+
+ if (j == clock->nfreqs) {
+ dev_err(dev,
+ "Pixel clock is too high for VFE");
+ return -EINVAL;
+ }
+
+ /* if sensor pixel clock is not available */
+ /* set highest possible VFE clock rate */
+ if (min_rate == 0)
+ j = clock->nfreqs - 1;
+
+ rate = clk_round_rate(clock->clk, clock->freq[j]);
+ if (rate < 0) {
+ dev_err(dev, "clk round rate failed: %ld\n",
+ rate);
+ return -EINVAL;
+ }
+
+ ret = clk_set_rate(clock->clk, rate);
+ if (ret < 0) {
+ dev_err(dev, "clk set rate failed: %d\n", ret);
+ return ret;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * vfe_check_clock_rates - Check current clock rates on VFE module
+ * @vfe: VFE device
+ *
+ * Return 0 if current clock rates are suitable for a new pipeline
+ * or a negative error code otherwise
+ */
+static int vfe_check_clock_rates(struct vfe_device *vfe)
+{
+ u32 pixel_clock[MSM_VFE_LINE_NUM];
+ int i, j;
+ int ret;
+
+ for (i = VFE_LINE_RDI0; i <= VFE_LINE_PIX; i++) {
+ ret = camss_get_pixel_clock(&vfe->line[i].subdev.entity,
+ &pixel_clock[i]);
+ if (ret)
+ pixel_clock[i] = 0;
+ }
+
+ for (i = 0; i < vfe->nclocks; i++) {
+ struct camss_clock *clock = &vfe->clock[i];
+
+ if (!strcmp(clock->name, "camss_vfe_vfe")) {
+ u64 min_rate = 0;
+ unsigned long rate;
+
+ for (j = VFE_LINE_RDI0; j <= VFE_LINE_PIX; j++) {
+ u32 tmp;
+ u8 bpp;
+
+ if (j == VFE_LINE_PIX) {
+ tmp = pixel_clock[j];
+ } else {
+ bpp = vfe_get_bpp(vfe->line[j].
+ fmt[MSM_VFE_PAD_SINK].code);
+ tmp = pixel_clock[j] * bpp / 64;
+ }
+
+ if (min_rate < tmp)
+ min_rate = tmp;
+ }
+
+ camss_add_clock_margin(&min_rate);
+
+ rate = clk_get_rate(clock->clk);
+ if (rate < min_rate)
+ return -EBUSY;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * vfe_get - Power up and reset VFE module
+ * @vfe: VFE Device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_get(struct vfe_device *vfe)
+{
+ int ret;
+
+ mutex_lock(&vfe->power_lock);
+
+ if (vfe->power_count == 0) {
+ ret = vfe_set_clock_rates(vfe);
+ if (ret < 0)
+ goto error_clocks;
+
+ ret = camss_enable_clocks(vfe->nclocks, vfe->clock,
+ to_device(vfe));
+ if (ret < 0)
+ goto error_clocks;
+
+ ret = vfe_reset(vfe);
+ if (ret < 0)
+ goto error_reset;
+
+ vfe_reset_output_maps(vfe);
+
+ vfe_init_outputs(vfe);
+ } else {
+ ret = vfe_check_clock_rates(vfe);
+ if (ret < 0)
+ goto error_clocks;
+ }
+ vfe->power_count++;
+
+ mutex_unlock(&vfe->power_lock);
+
+ return 0;
+
+error_reset:
+ camss_disable_clocks(vfe->nclocks, vfe->clock);
+
+error_clocks:
+ mutex_unlock(&vfe->power_lock);
+
+ return ret;
+}
+
+/*
+ * vfe_put - Power down VFE module
+ * @vfe: VFE Device
+ */
+static void vfe_put(struct vfe_device *vfe)
+{
+ mutex_lock(&vfe->power_lock);
+
+ if (vfe->power_count == 0) {
+ dev_err(to_device(vfe), "vfe power off on power_count == 0\n");
+ goto exit;
+ } else if (vfe->power_count == 1) {
+ if (vfe->was_streaming) {
+ vfe->was_streaming = 0;
+ vfe_halt(vfe);
+ }
+ camss_disable_clocks(vfe->nclocks, vfe->clock);
+ }
+
+ vfe->power_count--;
+
+exit:
+ mutex_unlock(&vfe->power_lock);
+}
+
+/*
+ * vfe_video_pad_to_line - Get pointer to VFE line by media pad
+ * @pad: Media pad
+ *
+ * Return pointer to vfe line structure
+ */
+static struct vfe_line *vfe_video_pad_to_line(struct media_pad *pad)
+{
+ struct media_pad *vfe_pad;
+ struct v4l2_subdev *subdev;
+
+ vfe_pad = media_entity_remote_pad(pad);
+ if (vfe_pad == NULL)
+ return NULL;
+
+ subdev = media_entity_to_v4l2_subdev(vfe_pad->entity);
+
+ return container_of(subdev, struct vfe_line, subdev);
+}
+
+/*
+ * vfe_queue_buffer - Add empty buffer
+ * @vid: Video device structure
+ * @buf: Buffer to be enqueued
+ *
+ * Add an empty buffer - depending on the current number of buffers it will be
+ * put in pending buffer queue or directly given to the hardware to be filled.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_queue_buffer(struct camss_video *vid,
+ struct camss_buffer *buf)
+{
+ struct vfe_device *vfe = &vid->camss->vfe;
+ struct vfe_line *line;
+ struct vfe_output *output;
+ unsigned long flags;
+
+ line = vfe_video_pad_to_line(&vid->pad);
+ if (!line) {
+ dev_err(to_device(vfe), "Can not queue buffer\n");
+ return -1;
+ }
+ output = &line->output;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ vfe_buf_update_wm_on_new(vfe, output, buf);
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return 0;
+}
+
+/*
+ * vfe_flush_buffers - Return all vb2 buffers
+ * @vid: Video device structure
+ * @state: vb2 buffer state of the returned buffers
+ *
+ * Return all buffers to vb2. This includes queued pending buffers (still
+ * unused) and any buffers given to the hardware but again still not used.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_flush_buffers(struct camss_video *vid,
+ enum vb2_buffer_state state)
+{
+ struct vfe_device *vfe = &vid->camss->vfe;
+ struct vfe_line *line;
+ struct vfe_output *output;
+ unsigned long flags;
+
+ line = vfe_video_pad_to_line(&vid->pad);
+ if (!line) {
+ dev_err(to_device(vfe), "Can not flush buffers\n");
+ return -1;
+ }
+ output = &line->output;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ vfe_buf_flush_pending(output, state);
+
+ if (output->buf[0])
+ vb2_buffer_done(&output->buf[0]->vb.vb2_buf, state);
+
+ if (output->buf[1])
+ vb2_buffer_done(&output->buf[1]->vb.vb2_buf, state);
+
+ if (output->last_buffer) {
+ vb2_buffer_done(&output->last_buffer->vb.vb2_buf, state);
+ output->last_buffer = NULL;
+ }
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return 0;
+}
+
+/*
+ * vfe_set_power - Power on/off VFE module
+ * @sd: VFE V4L2 subdevice
+ * @on: Requested power state
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_set_power(struct v4l2_subdev *sd, int on)
+{
+ struct vfe_line *line = v4l2_get_subdevdata(sd);
+ struct vfe_device *vfe = to_vfe(line);
+ int ret;
+
+ if (on) {
+ u32 hw_version;
+
+ ret = vfe_get(vfe);
+ if (ret < 0)
+ return ret;
+
+ hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
+ dev_dbg(to_device(vfe),
+ "VFE HW Version = 0x%08x\n", hw_version);
+ } else {
+ vfe_put(vfe);
+ }
+
+ return 0;
+}
+
+/*
+ * vfe_set_stream - Enable/disable streaming on VFE module
+ * @sd: VFE V4L2 subdevice
+ * @enable: Requested streaming state
+ *
+ * Main configuration of VFE module is triggered here.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_set_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct vfe_line *line = v4l2_get_subdevdata(sd);
+ struct vfe_device *vfe = to_vfe(line);
+ int ret;
+
+ if (enable) {
+ ret = vfe_enable(line);
+ if (ret < 0)
+ dev_err(to_device(vfe),
+ "Failed to enable vfe outputs\n");
+ } else {
+ ret = vfe_disable(line);
+ if (ret < 0)
+ dev_err(to_device(vfe),
+ "Failed to disable vfe outputs\n");
+ }
+
+ return ret;
+}
+
+/*
+ * __vfe_get_format - Get pointer to format structure
+ * @line: VFE line
+ * @cfg: V4L2 subdev pad configuration
+ * @pad: pad from which format is requested
+ * @which: TRY or ACTIVE format
+ *
+ * Return pointer to TRY or ACTIVE format structure
+ */
+static struct v4l2_mbus_framefmt *
+__vfe_get_format(struct vfe_line *line,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad,
+ enum v4l2_subdev_format_whence which)
+{
+ if (which == V4L2_SUBDEV_FORMAT_TRY)
+ return v4l2_subdev_get_try_format(&line->subdev, cfg, pad);
+
+ return &line->fmt[pad];
+}
+
+/*
+ * __vfe_get_compose - Get pointer to compose selection structure
+ * @line: VFE line
+ * @cfg: V4L2 subdev pad configuration
+ * @which: TRY or ACTIVE format
+ *
+ * Return pointer to TRY or ACTIVE compose rectangle structure
+ */
+static struct v4l2_rect *
+__vfe_get_compose(struct vfe_line *line,
+ struct v4l2_subdev_pad_config *cfg,
+ enum v4l2_subdev_format_whence which)
+{
+ if (which == V4L2_SUBDEV_FORMAT_TRY)
+ return v4l2_subdev_get_try_compose(&line->subdev, cfg,
+ MSM_VFE_PAD_SINK);
+
+ return &line->compose;
+}
+
+/*
+ * __vfe_get_crop - Get pointer to crop selection structure
+ * @line: VFE line
+ * @cfg: V4L2 subdev pad configuration
+ * @which: TRY or ACTIVE format
+ *
+ * Return pointer to TRY or ACTIVE crop rectangle structure
+ */
+static struct v4l2_rect *
+__vfe_get_crop(struct vfe_line *line,
+ struct v4l2_subdev_pad_config *cfg,
+ enum v4l2_subdev_format_whence which)
+{
+ if (which == V4L2_SUBDEV_FORMAT_TRY)
+ return v4l2_subdev_get_try_crop(&line->subdev, cfg,
+ MSM_VFE_PAD_SRC);
+
+ return &line->crop;
+}
+
+/*
+ * vfe_try_format - Handle try format by pad subdev method
+ * @line: VFE line
+ * @cfg: V4L2 subdev pad configuration
+ * @pad: pad on which format is requested
+ * @fmt: pointer to v4l2 format structure
+ * @which: wanted subdev format
+ */
+static void vfe_try_format(struct vfe_line *line,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad,
+ struct v4l2_mbus_framefmt *fmt,
+ enum v4l2_subdev_format_whence which)
+{
+ unsigned int i;
+ u32 code;
+
+ switch (pad) {
+ case MSM_VFE_PAD_SINK:
+ /* Set format on sink pad */
+
+ for (i = 0; i < ARRAY_SIZE(vfe_formats); i++)
+ if (fmt->code == vfe_formats[i].code)
+ break;
+
+ /* If not found, use UYVY as default */
+ if (i >= ARRAY_SIZE(vfe_formats))
+ fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
+
+ fmt->width = clamp_t(u32, fmt->width, 1, 8191);
+ fmt->height = clamp_t(u32, fmt->height, 1, 8191);
+
+ fmt->field = V4L2_FIELD_NONE;
+ fmt->colorspace = V4L2_COLORSPACE_SRGB;
+
+ break;
+
+ case MSM_VFE_PAD_SRC:
+ /* Set and return a format same as sink pad */
+
+ code = fmt->code;
+
+ *fmt = *__vfe_get_format(line, cfg, MSM_VFE_PAD_SINK,
+ which);
+
+ if (line->id == VFE_LINE_PIX) {
+ struct v4l2_rect *rect;
+
+ rect = __vfe_get_crop(line, cfg, which);
+
+ fmt->width = rect->width;
+ fmt->height = rect->height;
+
+ switch (fmt->code) {
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ if (code == MEDIA_BUS_FMT_YUYV8_1_5X8)
+ fmt->code = MEDIA_BUS_FMT_YUYV8_1_5X8;
+ else
+ fmt->code = MEDIA_BUS_FMT_YUYV8_2X8;
+ break;
+ case MEDIA_BUS_FMT_YVYU8_2X8:
+ if (code == MEDIA_BUS_FMT_YVYU8_1_5X8)
+ fmt->code = MEDIA_BUS_FMT_YVYU8_1_5X8;
+ else
+ fmt->code = MEDIA_BUS_FMT_YVYU8_2X8;
+ break;
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ default:
+ if (code == MEDIA_BUS_FMT_UYVY8_1_5X8)
+ fmt->code = MEDIA_BUS_FMT_UYVY8_1_5X8;
+ else
+ fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
+ break;
+ case MEDIA_BUS_FMT_VYUY8_2X8:
+ if (code == MEDIA_BUS_FMT_VYUY8_1_5X8)
+ fmt->code = MEDIA_BUS_FMT_VYUY8_1_5X8;
+ else
+ fmt->code = MEDIA_BUS_FMT_VYUY8_2X8;
+ break;
+ }
+ }
+
+ break;
+ }
+
+ fmt->colorspace = V4L2_COLORSPACE_SRGB;
+}
+
+/*
+ * vfe_try_compose - Handle try compose selection by pad subdev method
+ * @line: VFE line
+ * @cfg: V4L2 subdev pad configuration
+ * @rect: pointer to v4l2 rect structure
+ * @which: wanted subdev format
+ */
+static void vfe_try_compose(struct vfe_line *line,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_rect *rect,
+ enum v4l2_subdev_format_whence which)
+{
+ struct v4l2_mbus_framefmt *fmt;
+
+ fmt = __vfe_get_format(line, cfg, MSM_VFE_PAD_SINK, which);
+
+ if (rect->width > fmt->width)
+ rect->width = fmt->width;
+
+ if (rect->height > fmt->height)
+ rect->height = fmt->height;
+
+ if (fmt->width > rect->width * SCALER_RATIO_MAX)
+ rect->width = (fmt->width + SCALER_RATIO_MAX - 1) /
+ SCALER_RATIO_MAX;
+
+ rect->width &= ~0x1;
+
+ if (fmt->height > rect->height * SCALER_RATIO_MAX)
+ rect->height = (fmt->height + SCALER_RATIO_MAX - 1) /
+ SCALER_RATIO_MAX;
+
+ if (rect->width < 16)
+ rect->width = 16;
+
+ if (rect->height < 4)
+ rect->height = 4;
+}
+
+/*
+ * vfe_try_crop - Handle try crop selection by pad subdev method
+ * @line: VFE line
+ * @cfg: V4L2 subdev pad configuration
+ * @rect: pointer to v4l2 rect structure
+ * @which: wanted subdev format
+ */
+static void vfe_try_crop(struct vfe_line *line,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_rect *rect,
+ enum v4l2_subdev_format_whence which)
+{
+ struct v4l2_rect *compose;
+
+ compose = __vfe_get_compose(line, cfg, which);
+
+ if (rect->width > compose->width)
+ rect->width = compose->width;
+
+ if (rect->width + rect->left > compose->width)
+ rect->left = compose->width - rect->width;
+
+ if (rect->height > compose->height)
+ rect->height = compose->height;
+
+ if (rect->height + rect->top > compose->height)
+ rect->top = compose->height - rect->height;
+
+ /* wm in line based mode writes multiple of 16 horizontally */
+ rect->left += (rect->width & 0xf) >> 1;
+ rect->width &= ~0xf;
+
+ if (rect->width < 16) {
+ rect->left = 0;
+ rect->width = 16;
+ }
+
+ if (rect->height < 4) {
+ rect->top = 0;
+ rect->height = 4;
+ }
+}
+
+/*
+ * vfe_enum_mbus_code - Handle pixel format enumeration
+ * @sd: VFE V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @code: pointer to v4l2_subdev_mbus_code_enum structure
+ *
+ * return -EINVAL or zero on success
+ */
+static int vfe_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ struct vfe_line *line = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ if (code->pad == MSM_VFE_PAD_SINK) {
+ if (code->index >= ARRAY_SIZE(vfe_formats))
+ return -EINVAL;
+
+ code->code = vfe_formats[code->index].code;
+ } else {
+ if (code->index > 0)
+ return -EINVAL;
+
+ format = __vfe_get_format(line, cfg, MSM_VFE_PAD_SINK,
+ code->which);
+
+ code->code = format->code;
+ }
+
+ return 0;
+}
+
+/*
+ * vfe_enum_frame_size - Handle frame size enumeration
+ * @sd: VFE V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @fse: pointer to v4l2_subdev_frame_size_enum structure
+ *
+ * Return -EINVAL or zero on success
+ */
+static int vfe_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ struct vfe_line *line = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt format;
+
+ if (fse->index != 0)
+ return -EINVAL;
+
+ format.code = fse->code;
+ format.width = 1;
+ format.height = 1;
+ vfe_try_format(line, cfg, fse->pad, &format, fse->which);
+ fse->min_width = format.width;
+ fse->min_height = format.height;
+
+ if (format.code != fse->code)
+ return -EINVAL;
+
+ format.code = fse->code;
+ format.width = -1;
+ format.height = -1;
+ vfe_try_format(line, cfg, fse->pad, &format, fse->which);
+ fse->max_width = format.width;
+ fse->max_height = format.height;
+
+ return 0;
+}
+
+/*
+ * vfe_get_format - Handle get format by pads subdev method
+ * @sd: VFE V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @fmt: pointer to v4l2 subdev format structure
+ *
+ * Return -EINVAL or zero on success
+ */
+static int vfe_get_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct vfe_line *line = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ format = __vfe_get_format(line, cfg, fmt->pad, fmt->which);
+ if (format == NULL)
+ return -EINVAL;
+
+ fmt->format = *format;
+
+ return 0;
+}
+
+static int vfe_set_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel);
+
+/*
+ * vfe_set_format - Handle set format by pads subdev method
+ * @sd: VFE V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @fmt: pointer to v4l2 subdev format structure
+ *
+ * Return -EINVAL or zero on success
+ */
+static int vfe_set_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct vfe_line *line = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ format = __vfe_get_format(line, cfg, fmt->pad, fmt->which);
+ if (format == NULL)
+ return -EINVAL;
+
+ vfe_try_format(line, cfg, fmt->pad, &fmt->format, fmt->which);
+ *format = fmt->format;
+
+ if (fmt->pad == MSM_VFE_PAD_SINK) {
+ struct v4l2_subdev_selection sel = { 0 };
+ int ret;
+
+ /* Propagate the format from sink to source */
+ format = __vfe_get_format(line, cfg, MSM_VFE_PAD_SRC,
+ fmt->which);
+
+ *format = fmt->format;
+ vfe_try_format(line, cfg, MSM_VFE_PAD_SRC, format,
+ fmt->which);
+
+ if (line->id != VFE_LINE_PIX)
+ return 0;
+
+ /* Reset sink pad compose selection */
+ sel.which = fmt->which;
+ sel.pad = MSM_VFE_PAD_SINK;
+ sel.target = V4L2_SEL_TGT_COMPOSE;
+ sel.r.width = fmt->format.width;
+ sel.r.height = fmt->format.height;
+ ret = vfe_set_selection(sd, cfg, &sel);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * vfe_get_selection - Handle get selection by pads subdev method
+ * @sd: VFE V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @sel: pointer to v4l2 subdev selection structure
+ *
+ * Return -EINVAL or zero on success
+ */
+static int vfe_get_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel)
+{
+ struct vfe_line *line = v4l2_get_subdevdata(sd);
+ struct v4l2_subdev_format fmt = { 0 };
+ struct v4l2_rect *rect;
+ int ret;
+
+ if (line->id != VFE_LINE_PIX)
+ return -EINVAL;
+
+ if (sel->pad == MSM_VFE_PAD_SINK)
+ switch (sel->target) {
+ case V4L2_SEL_TGT_COMPOSE_BOUNDS:
+ fmt.pad = sel->pad;
+ fmt.which = sel->which;
+ ret = vfe_get_format(sd, cfg, &fmt);
+ if (ret < 0)
+ return ret;
+
+ sel->r.left = 0;
+ sel->r.top = 0;
+ sel->r.width = fmt.format.width;
+ sel->r.height = fmt.format.height;
+ break;
+ case V4L2_SEL_TGT_COMPOSE:
+ rect = __vfe_get_compose(line, cfg, sel->which);
+ if (rect == NULL)
+ return -EINVAL;
+
+ sel->r = *rect;
+ break;
+ default:
+ return -EINVAL;
+ }
+ else if (sel->pad == MSM_VFE_PAD_SRC)
+ switch (sel->target) {
+ case V4L2_SEL_TGT_CROP_BOUNDS:
+ rect = __vfe_get_compose(line, cfg, sel->which);
+ if (rect == NULL)
+ return -EINVAL;
+
+ sel->r.left = rect->left;
+ sel->r.top = rect->top;
+ sel->r.width = rect->width;
+ sel->r.height = rect->height;
+ break;
+ case V4L2_SEL_TGT_CROP:
+ rect = __vfe_get_crop(line, cfg, sel->which);
+ if (rect == NULL)
+ return -EINVAL;
+
+ sel->r = *rect;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * vfe_set_selection - Handle set selection by pads subdev method
+ * @sd: VFE V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @sel: pointer to v4l2 subdev selection structure
+ *
+ * Return -EINVAL or zero on success
+ */
+static int vfe_set_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel)
+{
+ struct vfe_line *line = v4l2_get_subdevdata(sd);
+ struct v4l2_rect *rect;
+ int ret;
+
+ if (line->id != VFE_LINE_PIX)
+ return -EINVAL;
+
+ if (sel->target == V4L2_SEL_TGT_COMPOSE &&
+ sel->pad == MSM_VFE_PAD_SINK) {
+ struct v4l2_subdev_selection crop = { 0 };
+
+ rect = __vfe_get_compose(line, cfg, sel->which);
+ if (rect == NULL)
+ return -EINVAL;
+
+ vfe_try_compose(line, cfg, &sel->r, sel->which);
+ *rect = sel->r;
+
+ /* Reset source crop selection */
+ crop.which = sel->which;
+ crop.pad = MSM_VFE_PAD_SRC;
+ crop.target = V4L2_SEL_TGT_CROP;
+ crop.r = *rect;
+ ret = vfe_set_selection(sd, cfg, &crop);
+ } else if (sel->target == V4L2_SEL_TGT_CROP &&
+ sel->pad == MSM_VFE_PAD_SRC) {
+ struct v4l2_subdev_format fmt = { 0 };
+
+ rect = __vfe_get_crop(line, cfg, sel->which);
+ if (rect == NULL)
+ return -EINVAL;
+
+ vfe_try_crop(line, cfg, &sel->r, sel->which);
+ *rect = sel->r;
+
+ /* Reset source pad format width and height */
+ fmt.which = sel->which;
+ fmt.pad = MSM_VFE_PAD_SRC;
+ ret = vfe_get_format(sd, cfg, &fmt);
+ if (ret < 0)
+ return ret;
+
+ fmt.format.width = rect->width;
+ fmt.format.height = rect->height;
+ ret = vfe_set_format(sd, cfg, &fmt);
+ } else {
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+/*
+ * vfe_init_formats - Initialize formats on all pads
+ * @sd: VFE V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ *
+ * Initialize all pad formats with default values.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_subdev_format format = {
+ .pad = MSM_VFE_PAD_SINK,
+ .which = fh ? V4L2_SUBDEV_FORMAT_TRY :
+ V4L2_SUBDEV_FORMAT_ACTIVE,
+ .format = {
+ .code = MEDIA_BUS_FMT_UYVY8_2X8,
+ .width = 1920,
+ .height = 1080
+ }
+ };
+
+ return vfe_set_format(sd, fh ? fh->pad : NULL, &format);
+}
+
+/*
+ * msm_vfe_subdev_init - Initialize VFE device structure and resources
+ * @vfe: VFE device
+ * @res: VFE module resources table
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int msm_vfe_subdev_init(struct vfe_device *vfe, const struct resources *res)
+{
+ struct device *dev = to_device(vfe);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *r;
+ struct camss *camss = to_camss(vfe);
+ int i, j;
+ int ret;
+
+ /* Memory */
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[0]);
+ vfe->base = devm_ioremap_resource(dev, r);
+ if (IS_ERR(vfe->base)) {
+ dev_err(dev, "could not map memory\n");
+ return PTR_ERR(vfe->base);
+ }
+
+ /* Interrupt */
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
+ res->interrupt[0]);
+ if (!r) {
+ dev_err(dev, "missing IRQ\n");
+ return -EINVAL;
+ }
+
+ vfe->irq = r->start;
+ snprintf(vfe->irq_name, sizeof(vfe->irq_name), "%s_%s%d",
+ dev_name(dev), MSM_VFE_NAME, vfe->id);
+ ret = devm_request_irq(dev, vfe->irq, vfe_isr,
+ IRQF_TRIGGER_RISING, vfe->irq_name, vfe);
+ if (ret < 0) {
+ dev_err(dev, "request_irq failed: %d\n", ret);
+ return ret;
+ }
+
+ /* Clocks */
+
+ vfe->nclocks = 0;
+ while (res->clock[vfe->nclocks])
+ vfe->nclocks++;
+
+ vfe->clock = devm_kcalloc(dev, vfe->nclocks, sizeof(*vfe->clock),
+ GFP_KERNEL);
+ if (!vfe->clock)
+ return -ENOMEM;
+
+ for (i = 0; i < vfe->nclocks; i++) {
+ struct camss_clock *clock = &vfe->clock[i];
+
+ clock->clk = devm_clk_get(dev, res->clock[i]);
+ if (IS_ERR(clock->clk))
+ return PTR_ERR(clock->clk);
+
+ clock->name = res->clock[i];
+
+ clock->nfreqs = 0;
+ while (res->clock_rate[i][clock->nfreqs])
+ clock->nfreqs++;
+
+ if (!clock->nfreqs) {
+ clock->freq = NULL;
+ continue;
+ }
+
+ clock->freq = devm_kcalloc(dev,
+ clock->nfreqs,
+ sizeof(*clock->freq),
+ GFP_KERNEL);
+ if (!clock->freq)
+ return -ENOMEM;
+
+ for (j = 0; j < clock->nfreqs; j++)
+ clock->freq[j] = res->clock_rate[i][j];
+ }
+
+ mutex_init(&vfe->power_lock);
+ vfe->power_count = 0;
+
+ mutex_init(&vfe->stream_lock);
+ vfe->stream_count = 0;
+
+ spin_lock_init(&vfe->output_lock);
+
+ vfe->id = 0;
+ vfe->reg_update = 0;
+
+ for (i = VFE_LINE_RDI0; i <= VFE_LINE_PIX; i++) {
+ vfe->line[i].video_out.type =
+ V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+ vfe->line[i].video_out.camss = camss;
+ vfe->line[i].id = i;
+ init_completion(&vfe->line[i].output.sof);
+ init_completion(&vfe->line[i].output.reg_update);
+ }
+
+ init_completion(&vfe->reset_complete);
+ init_completion(&vfe->halt_complete);
+
+ return 0;
+}
+
+/*
+ * msm_vfe_get_vfe_id - Get VFE HW module id
+ * @entity: Pointer to VFE media entity structure
+ * @id: Return CSID HW module id here
+ */
+void msm_vfe_get_vfe_id(struct media_entity *entity, u8 *id)
+{
+ struct v4l2_subdev *sd;
+ struct vfe_line *line;
+ struct vfe_device *vfe;
+
+ sd = media_entity_to_v4l2_subdev(entity);
+ line = v4l2_get_subdevdata(sd);
+ vfe = to_vfe(line);
+
+ *id = vfe->id;
+}
+
+/*
+ * msm_vfe_get_vfe_line_id - Get VFE line id by media entity
+ * @entity: Pointer to VFE media entity structure
+ * @id: Return VFE line id here
+ */
+void msm_vfe_get_vfe_line_id(struct media_entity *entity, enum vfe_line_id *id)
+{
+ struct v4l2_subdev *sd;
+ struct vfe_line *line;
+
+ sd = media_entity_to_v4l2_subdev(entity);
+ line = v4l2_get_subdevdata(sd);
+
+ *id = line->id;
+}
+
+/*
+ * vfe_link_setup - Setup VFE connections
+ * @entity: Pointer to media entity structure
+ * @local: Pointer to local pad
+ * @remote: Pointer to remote pad
+ * @flags: Link flags
+ *
+ * Return 0 on success
+ */
+static int vfe_link_setup(struct media_entity *entity,
+ const struct media_pad *local,
+ const struct media_pad *remote, u32 flags)
+{
+ if (flags & MEDIA_LNK_FL_ENABLED)
+ if (media_entity_remote_pad(local))
+ return -EBUSY;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_core_ops vfe_core_ops = {
+ .s_power = vfe_set_power,
+};
+
+static const struct v4l2_subdev_video_ops vfe_video_ops = {
+ .s_stream = vfe_set_stream,
+};
+
+static const struct v4l2_subdev_pad_ops vfe_pad_ops = {
+ .enum_mbus_code = vfe_enum_mbus_code,
+ .enum_frame_size = vfe_enum_frame_size,
+ .get_fmt = vfe_get_format,
+ .set_fmt = vfe_set_format,
+ .get_selection = vfe_get_selection,
+ .set_selection = vfe_set_selection,
+};
+
+static const struct v4l2_subdev_ops vfe_v4l2_ops = {
+ .core = &vfe_core_ops,
+ .video = &vfe_video_ops,
+ .pad = &vfe_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops vfe_v4l2_internal_ops = {
+ .open = vfe_init_formats,
+};
+
+static const struct media_entity_operations vfe_media_ops = {
+ .link_setup = vfe_link_setup,
+ .link_validate = v4l2_subdev_link_validate,
+};
+
+static const struct camss_video_ops camss_vfe_video_ops = {
+ .queue_buffer = vfe_queue_buffer,
+ .flush_buffers = vfe_flush_buffers,
+};
+
+void msm_vfe_stop_streaming(struct vfe_device *vfe)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(vfe->line); i++)
+ msm_video_stop_streaming(&vfe->line[i].video_out);
+}
+
+/*
+ * msm_vfe_register_entities - Register subdev node for VFE module
+ * @vfe: VFE device
+ * @v4l2_dev: V4L2 device
+ *
+ * Initialize and register a subdev node for the VFE module. Then
+ * call msm_video_register() to register the video device node which
+ * will be connected to this subdev node. Then actually create the
+ * media link between them.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int msm_vfe_register_entities(struct vfe_device *vfe,
+ struct v4l2_device *v4l2_dev)
+{
+ struct device *dev = to_device(vfe);
+ struct v4l2_subdev *sd;
+ struct media_pad *pads;
+ struct camss_video *video_out;
+ int ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(vfe->line); i++) {
+ char name[32];
+
+ sd = &vfe->line[i].subdev;
+ pads = vfe->line[i].pads;
+ video_out = &vfe->line[i].video_out;
+
+ v4l2_subdev_init(sd, &vfe_v4l2_ops);
+ sd->internal_ops = &vfe_v4l2_internal_ops;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ if (i == VFE_LINE_PIX)
+ snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d_%s",
+ MSM_VFE_NAME, vfe->id, "pix");
+ else
+ snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d_%s%d",
+ MSM_VFE_NAME, vfe->id, "rdi", i);
+
+ v4l2_set_subdevdata(sd, &vfe->line[i]);
+
+ ret = vfe_init_formats(sd, NULL);
+ if (ret < 0) {
+ dev_err(dev, "Failed to init format: %d\n", ret);
+ goto error_init;
+ }
+
+ pads[MSM_VFE_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+ pads[MSM_VFE_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
+
+ sd->entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
+ sd->entity.ops = &vfe_media_ops;
+ ret = media_entity_pads_init(&sd->entity, MSM_VFE_PADS_NUM,
+ pads);
+ if (ret < 0) {
+ dev_err(dev, "Failed to init media entity: %d\n", ret);
+ goto error_init;
+ }
+
+ ret = v4l2_device_register_subdev(v4l2_dev, sd);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register subdev: %d\n", ret);
+ goto error_reg_subdev;
+ }
+
+ video_out->ops = &camss_vfe_video_ops;
+ video_out->bpl_alignment = 8;
+ video_out->line_based = 0;
+ if (i == VFE_LINE_PIX) {
+ video_out->bpl_alignment = 16;
+ video_out->line_based = 1;
+ }
+ snprintf(name, ARRAY_SIZE(name), "%s%d_%s%d",
+ MSM_VFE_NAME, vfe->id, "video", i);
+ ret = msm_video_register(video_out, v4l2_dev, name,
+ i == VFE_LINE_PIX ? 1 : 0);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register video node: %d\n",
+ ret);
+ goto error_reg_video;
+ }
+
+ ret = media_create_pad_link(
+ &sd->entity, MSM_VFE_PAD_SRC,
+ &video_out->vdev.entity, 0,
+ MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED);
+ if (ret < 0) {
+ dev_err(dev, "Failed to link %s->%s entities: %d\n",
+ sd->entity.name, video_out->vdev.entity.name,
+ ret);
+ goto error_link;
+ }
+ }
+
+ return 0;
+
+error_link:
+ msm_video_unregister(video_out);
+
+error_reg_video:
+ v4l2_device_unregister_subdev(sd);
+
+error_reg_subdev:
+ media_entity_cleanup(&sd->entity);
+
+error_init:
+ for (i--; i >= 0; i--) {
+ sd = &vfe->line[i].subdev;
+ video_out = &vfe->line[i].video_out;
+
+ msm_video_unregister(video_out);
+ v4l2_device_unregister_subdev(sd);
+ media_entity_cleanup(&sd->entity);
+ }
+
+ return ret;
+}
+
+/*
+ * msm_vfe_unregister_entities - Unregister VFE module subdev node
+ * @vfe: VFE device
+ */
+void msm_vfe_unregister_entities(struct vfe_device *vfe)
+{
+ int i;
+
+ mutex_destroy(&vfe->power_lock);
+ mutex_destroy(&vfe->stream_lock);
+
+ for (i = 0; i < ARRAY_SIZE(vfe->line); i++) {
+ struct v4l2_subdev *sd = &vfe->line[i].subdev;
+ struct camss_video *video_out = &vfe->line[i].video_out;
+
+ msm_video_unregister(video_out);
+ v4l2_device_unregister_subdev(sd);
+ media_entity_cleanup(&sd->entity);
+ }
+}
new file mode 100644
@@ -0,0 +1,123 @@
+/*
+ * camss-vfe.h
+ *
+ * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module
+ *
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015-2018 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef QC_MSM_CAMSS_VFE_H
+#define QC_MSM_CAMSS_VFE_H
+
+#include <linux/clk.h>
+#include <linux/spinlock_types.h>
+#include <media/media-entity.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+#include "camss-video.h"
+
+#define MSM_VFE_PAD_SINK 0
+#define MSM_VFE_PAD_SRC 1
+#define MSM_VFE_PADS_NUM 2
+
+#define MSM_VFE_LINE_NUM 4
+#define MSM_VFE_IMAGE_MASTERS_NUM 7
+#define MSM_VFE_COMPOSITE_IRQ_NUM 4
+
+#define MSM_VFE_VFE0_UB_SIZE 1023
+#define MSM_VFE_VFE0_UB_SIZE_RDI (MSM_VFE_VFE0_UB_SIZE / 3)
+#define MSM_VFE_VFE1_UB_SIZE 1535
+#define MSM_VFE_VFE1_UB_SIZE_RDI (MSM_VFE_VFE1_UB_SIZE / 3)
+
+enum vfe_output_state {
+ VFE_OUTPUT_OFF,
+ VFE_OUTPUT_RESERVED,
+ VFE_OUTPUT_SINGLE,
+ VFE_OUTPUT_CONTINUOUS,
+ VFE_OUTPUT_IDLE,
+ VFE_OUTPUT_STOPPING
+};
+
+enum vfe_line_id {
+ VFE_LINE_NONE = -1,
+ VFE_LINE_RDI0 = 0,
+ VFE_LINE_RDI1 = 1,
+ VFE_LINE_RDI2 = 2,
+ VFE_LINE_PIX = 3
+};
+
+struct vfe_output {
+ u8 wm_num;
+ u8 wm_idx[3];
+
+ int active_buf;
+ struct camss_buffer *buf[2];
+ struct camss_buffer *last_buffer;
+ struct list_head pending_bufs;
+
+ unsigned int drop_update_idx;
+
+ enum vfe_output_state state;
+ unsigned int sequence;
+ int wait_sof;
+ int wait_reg_update;
+ struct completion sof;
+ struct completion reg_update;
+};
+
+struct vfe_line {
+ enum vfe_line_id id;
+ struct v4l2_subdev subdev;
+ struct media_pad pads[MSM_VFE_PADS_NUM];
+ struct v4l2_mbus_framefmt fmt[MSM_VFE_PADS_NUM];
+ struct v4l2_rect compose;
+ struct v4l2_rect crop;
+ struct camss_video video_out;
+ struct vfe_output output;
+};
+
+struct vfe_device {
+ u8 id;
+ void __iomem *base;
+ u32 irq;
+ char irq_name[30];
+ struct camss_clock *clock;
+ int nclocks;
+ struct completion reset_complete;
+ struct completion halt_complete;
+ struct mutex power_lock;
+ int power_count;
+ struct mutex stream_lock;
+ int stream_count;
+ spinlock_t output_lock;
+ enum vfe_line_id wm_output_map[MSM_VFE_IMAGE_MASTERS_NUM];
+ struct vfe_line line[MSM_VFE_LINE_NUM];
+ u32 reg_update;
+ u8 was_streaming;
+};
+
+struct resources;
+
+int msm_vfe_subdev_init(struct vfe_device *vfe, const struct resources *res);
+
+int msm_vfe_register_entities(struct vfe_device *vfe,
+ struct v4l2_device *v4l2_dev);
+
+void msm_vfe_unregister_entities(struct vfe_device *vfe);
+
+void msm_vfe_get_vfe_id(struct media_entity *entity, u8 *id);
+void msm_vfe_get_vfe_line_id(struct media_entity *entity, enum vfe_line_id *id);
+
+void msm_vfe_stop_streaming(struct vfe_device *vfe);
+
+#endif /* QC_MSM_CAMSS_VFE_H */
new file mode 100644
@@ -0,0 +1,859 @@
+/*
+ * camss-video.c
+ *
+ * Qualcomm MSM Camera Subsystem - V4L2 device node
+ *
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015-2018 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/slab.h>
+#include <media/media-entity.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-mc.h>
+#include <media/videobuf2-dma-sg.h>
+
+#include "camss-video.h"
+#include "camss.h"
+
+struct fract {
+ u8 numerator;
+ u8 denominator;
+};
+
+/*
+ * struct camss_format_info - ISP media bus format information
+ * @code: V4L2 media bus format code
+ * @pixelformat: V4L2 pixel format FCC identifier
+ * @planes: Number of planes
+ * @hsub: Horizontal subsampling (for each plane)
+ * @vsub: Vertical subsampling (for each plane)
+ * @bpp: Bits per pixel when stored in memory (for each plane)
+ */
+struct camss_format_info {
+ u32 code;
+ u32 pixelformat;
+ u8 planes;
+ struct fract hsub[3];
+ struct fract vsub[3];
+ unsigned int bpp[3];
+};
+
+static const struct camss_format_info formats_rdi[] = {
+ { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_UYVY, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+ { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_VYUY, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+ { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_YUYV, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+ { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_YVYU, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+ { MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_PIX_FMT_SBGGR8, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 8 } },
+ { MEDIA_BUS_FMT_SGBRG8_1X8, V4L2_PIX_FMT_SGBRG8, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 8 } },
+ { MEDIA_BUS_FMT_SGRBG8_1X8, V4L2_PIX_FMT_SGRBG8, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 8 } },
+ { MEDIA_BUS_FMT_SRGGB8_1X8, V4L2_PIX_FMT_SRGGB8, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 8 } },
+ { MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_SBGGR10P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 10 } },
+ { MEDIA_BUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_SGBRG10P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 10 } },
+ { MEDIA_BUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 10 } },
+ { MEDIA_BUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_SRGGB10P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 10 } },
+ { MEDIA_BUS_FMT_SBGGR12_1X12, V4L2_PIX_FMT_SBGGR12P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 12 } },
+ { MEDIA_BUS_FMT_SGBRG12_1X12, V4L2_PIX_FMT_SGBRG12P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 12 } },
+ { MEDIA_BUS_FMT_SGRBG12_1X12, V4L2_PIX_FMT_SGRBG12P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 12 } },
+ { MEDIA_BUS_FMT_SRGGB12_1X12, V4L2_PIX_FMT_SRGGB12P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 12 } },
+};
+
+static const struct camss_format_info formats_pix[] = {
+ { MEDIA_BUS_FMT_YUYV8_1_5X8, V4L2_PIX_FMT_NV12, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_YVYU8_1_5X8, V4L2_PIX_FMT_NV12, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_UYVY8_1_5X8, V4L2_PIX_FMT_NV12, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_VYUY8_1_5X8, V4L2_PIX_FMT_NV12, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_YUYV8_1_5X8, V4L2_PIX_FMT_NV21, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_YVYU8_1_5X8, V4L2_PIX_FMT_NV21, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_UYVY8_1_5X8, V4L2_PIX_FMT_NV21, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_VYUY8_1_5X8, V4L2_PIX_FMT_NV21, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_NV16, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_NV16, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_NV16, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_NV16, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_NV61, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_NV61, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_NV61, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_NV61, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+};
+
+/* -----------------------------------------------------------------------------
+ * Helper functions
+ */
+
+static int video_find_format(u32 code, u32 pixelformat,
+ const struct camss_format_info *formats,
+ unsigned int nformats)
+{
+ int i;
+
+ for (i = 0; i < nformats; i++) {
+ if (formats[i].code == code &&
+ formats[i].pixelformat == pixelformat)
+ return i;
+ }
+
+ for (i = 0; i < nformats; i++)
+ if (formats[i].code == code)
+ return i;
+
+ WARN_ON(1);
+
+ return -EINVAL;
+}
+
+/*
+ * video_mbus_to_pix_mp - Convert v4l2_mbus_framefmt to v4l2_pix_format_mplane
+ * @mbus: v4l2_mbus_framefmt format (input)
+ * @pix: v4l2_pix_format_mplane format (output)
+ * @f: a pointer to formats array element to be used for the conversion
+ * @alignment: bytesperline alignment value
+ *
+ * Fill the output pix structure with information from the input mbus format.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int video_mbus_to_pix_mp(const struct v4l2_mbus_framefmt *mbus,
+ struct v4l2_pix_format_mplane *pix,
+ const struct camss_format_info *f,
+ unsigned int alignment)
+{
+ unsigned int i;
+ u32 bytesperline;
+
+ memset(pix, 0, sizeof(*pix));
+ v4l2_fill_pix_format_mplane(pix, mbus);
+ pix->pixelformat = f->pixelformat;
+ pix->num_planes = f->planes;
+ for (i = 0; i < pix->num_planes; i++) {
+ bytesperline = pix->width / f->hsub[i].numerator *
+ f->hsub[i].denominator * f->bpp[i] / 8;
+ bytesperline = ALIGN(bytesperline, alignment);
+ pix->plane_fmt[i].bytesperline = bytesperline;
+ pix->plane_fmt[i].sizeimage = pix->height /
+ f->vsub[i].numerator * f->vsub[i].denominator *
+ bytesperline;
+ }
+
+ return 0;
+}
+
+static struct v4l2_subdev *video_remote_subdev(struct camss_video *video,
+ u32 *pad)
+{
+ struct media_pad *remote;
+
+ remote = media_entity_remote_pad(&video->pad);
+
+ if (!remote || !is_media_entity_v4l2_subdev(remote->entity))
+ return NULL;
+
+ if (pad)
+ *pad = remote->index;
+
+ return media_entity_to_v4l2_subdev(remote->entity);
+}
+
+static int video_get_subdev_format(struct camss_video *video,
+ struct v4l2_format *format)
+{
+ struct v4l2_subdev_format fmt;
+ struct v4l2_subdev *subdev;
+ u32 pad;
+ int ret;
+
+ subdev = video_remote_subdev(video, &pad);
+ if (subdev == NULL)
+ return -EPIPE;
+
+ fmt.pad = pad;
+ fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+
+ ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt);
+ if (ret)
+ return ret;
+
+ ret = video_find_format(fmt.format.code,
+ format->fmt.pix_mp.pixelformat,
+ video->formats, video->nformats);
+ if (ret < 0)
+ return ret;
+
+ format->type = video->type;
+
+ return video_mbus_to_pix_mp(&fmt.format, &format->fmt.pix_mp,
+ &video->formats[ret], video->bpl_alignment);
+}
+
+/* -----------------------------------------------------------------------------
+ * Video queue operations
+ */
+
+static int video_queue_setup(struct vb2_queue *q,
+ unsigned int *num_buffers, unsigned int *num_planes,
+ unsigned int sizes[], struct device *alloc_devs[])
+{
+ struct camss_video *video = vb2_get_drv_priv(q);
+ const struct v4l2_pix_format_mplane *format =
+ &video->active_fmt.fmt.pix_mp;
+ unsigned int i;
+
+ if (*num_planes) {
+ if (*num_planes != format->num_planes)
+ return -EINVAL;
+
+ for (i = 0; i < *num_planes; i++)
+ if (sizes[i] < format->plane_fmt[i].sizeimage)
+ return -EINVAL;
+
+ return 0;
+ }
+
+ *num_planes = format->num_planes;
+
+ for (i = 0; i < *num_planes; i++)
+ sizes[i] = format->plane_fmt[i].sizeimage;
+
+ return 0;
+}
+
+static int video_buf_init(struct vb2_buffer *vb)
+{
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct camss_video *video = vb2_get_drv_priv(vb->vb2_queue);
+ struct camss_buffer *buffer = container_of(vbuf, struct camss_buffer,
+ vb);
+ const struct v4l2_pix_format_mplane *format =
+ &video->active_fmt.fmt.pix_mp;
+ struct sg_table *sgt;
+ unsigned int i;
+
+ for (i = 0; i < format->num_planes; i++) {
+ sgt = vb2_dma_sg_plane_desc(vb, i);
+ if (!sgt)
+ return -EFAULT;
+
+ buffer->addr[i] = sg_dma_address(sgt->sgl);
+ }
+
+ if (format->pixelformat == V4L2_PIX_FMT_NV12 ||
+ format->pixelformat == V4L2_PIX_FMT_NV21 ||
+ format->pixelformat == V4L2_PIX_FMT_NV16 ||
+ format->pixelformat == V4L2_PIX_FMT_NV61)
+ buffer->addr[1] = buffer->addr[0] +
+ format->plane_fmt[0].bytesperline *
+ format->height;
+
+ return 0;
+}
+
+static int video_buf_prepare(struct vb2_buffer *vb)
+{
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct camss_video *video = vb2_get_drv_priv(vb->vb2_queue);
+ const struct v4l2_pix_format_mplane *format =
+ &video->active_fmt.fmt.pix_mp;
+ unsigned int i;
+
+ for (i = 0; i < format->num_planes; i++) {
+ if (format->plane_fmt[i].sizeimage > vb2_plane_size(vb, i))
+ return -EINVAL;
+
+ vb2_set_plane_payload(vb, i, format->plane_fmt[i].sizeimage);
+ }
+
+ vbuf->field = V4L2_FIELD_NONE;
+
+ return 0;
+}
+
+static void video_buf_queue(struct vb2_buffer *vb)
+{
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct camss_video *video = vb2_get_drv_priv(vb->vb2_queue);
+ struct camss_buffer *buffer = container_of(vbuf, struct camss_buffer,
+ vb);
+
+ video->ops->queue_buffer(video, buffer);
+}
+
+static int video_check_format(struct camss_video *video)
+{
+ struct v4l2_pix_format_mplane *pix = &video->active_fmt.fmt.pix_mp;
+ struct v4l2_format format;
+ struct v4l2_pix_format_mplane *sd_pix = &format.fmt.pix_mp;
+ int ret;
+
+ sd_pix->pixelformat = pix->pixelformat;
+ ret = video_get_subdev_format(video, &format);
+ if (ret < 0)
+ return ret;
+
+ if (pix->pixelformat != sd_pix->pixelformat ||
+ pix->height != sd_pix->height ||
+ pix->width != sd_pix->width ||
+ pix->num_planes != sd_pix->num_planes ||
+ pix->field != format.fmt.pix_mp.field)
+ return -EPIPE;
+
+ return 0;
+}
+
+static int video_start_streaming(struct vb2_queue *q, unsigned int count)
+{
+ struct camss_video *video = vb2_get_drv_priv(q);
+ struct video_device *vdev = &video->vdev;
+ struct media_entity *entity;
+ struct media_pad *pad;
+ struct v4l2_subdev *subdev;
+ int ret;
+
+ ret = media_pipeline_start(&vdev->entity, &video->pipe);
+ if (ret < 0)
+ return ret;
+
+ ret = video_check_format(video);
+ if (ret < 0)
+ goto error;
+
+ entity = &vdev->entity;
+ while (1) {
+ pad = &entity->pads[0];
+ if (!(pad->flags & MEDIA_PAD_FL_SINK))
+ break;
+
+ pad = media_entity_remote_pad(pad);
+ if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
+ break;
+
+ entity = pad->entity;
+ subdev = media_entity_to_v4l2_subdev(entity);
+
+ ret = v4l2_subdev_call(subdev, video, s_stream, 1);
+ if (ret < 0 && ret != -ENOIOCTLCMD)
+ goto error;
+ }
+
+ return 0;
+
+error:
+ media_pipeline_stop(&vdev->entity);
+
+ video->ops->flush_buffers(video, VB2_BUF_STATE_QUEUED);
+
+ return ret;
+}
+
+static void video_stop_streaming(struct vb2_queue *q)
+{
+ struct camss_video *video = vb2_get_drv_priv(q);
+ struct video_device *vdev = &video->vdev;
+ struct media_entity *entity;
+ struct media_pad *pad;
+ struct v4l2_subdev *subdev;
+
+ entity = &vdev->entity;
+ while (1) {
+ pad = &entity->pads[0];
+ if (!(pad->flags & MEDIA_PAD_FL_SINK))
+ break;
+
+ pad = media_entity_remote_pad(pad);
+ if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
+ break;
+
+ entity = pad->entity;
+ subdev = media_entity_to_v4l2_subdev(entity);
+
+ v4l2_subdev_call(subdev, video, s_stream, 0);
+ }
+
+ media_pipeline_stop(&vdev->entity);
+
+ video->ops->flush_buffers(video, VB2_BUF_STATE_ERROR);
+}
+
+static const struct vb2_ops msm_video_vb2_q_ops = {
+ .queue_setup = video_queue_setup,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+ .buf_init = video_buf_init,
+ .buf_prepare = video_buf_prepare,
+ .buf_queue = video_buf_queue,
+ .start_streaming = video_start_streaming,
+ .stop_streaming = video_stop_streaming,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 ioctls
+ */
+
+static int video_querycap(struct file *file, void *fh,
+ struct v4l2_capability *cap)
+{
+ struct camss_video *video = video_drvdata(file);
+
+ strlcpy(cap->driver, "qcom-camss", sizeof(cap->driver));
+ strlcpy(cap->card, "Qualcomm Camera Subsystem", sizeof(cap->card));
+ snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
+ dev_name(video->camss->dev));
+
+ return 0;
+}
+
+static int video_enum_fmt(struct file *file, void *fh, struct v4l2_fmtdesc *f)
+{
+ struct camss_video *video = video_drvdata(file);
+ int i, j, k;
+
+ if (f->type != video->type)
+ return -EINVAL;
+
+ if (f->index >= video->nformats)
+ return -EINVAL;
+
+ /* find index "i" of "k"th unique pixelformat in formats array */
+ k = -1;
+ for (i = 0; i < video->nformats; i++) {
+ for (j = 0; j < i; j++) {
+ if (video->formats[i].pixelformat ==
+ video->formats[j].pixelformat)
+ break;
+ }
+
+ if (j == i)
+ k++;
+
+ if (k == f->index)
+ break;
+ }
+
+ if (k < f->index)
+ return -EINVAL;
+
+ f->pixelformat = video->formats[i].pixelformat;
+
+ return 0;
+}
+
+static int video_g_fmt(struct file *file, void *fh, struct v4l2_format *f)
+{
+ struct camss_video *video = video_drvdata(file);
+
+ *f = video->active_fmt;
+
+ return 0;
+}
+
+static int __video_try_fmt(struct camss_video *video, struct v4l2_format *f)
+{
+ struct v4l2_pix_format_mplane *pix_mp;
+ const struct camss_format_info *fi;
+ struct v4l2_plane_pix_format *p;
+ u32 bytesperline[3] = { 0 };
+ u32 sizeimage[3] = { 0 };
+ u32 width, height;
+ u32 bpl, lines;
+ int i, j;
+
+ pix_mp = &f->fmt.pix_mp;
+
+ if (video->line_based)
+ for (i = 0; i < pix_mp->num_planes && i < 3; i++) {
+ p = &pix_mp->plane_fmt[i];
+ bytesperline[i] = clamp_t(u32, p->bytesperline,
+ 1, 65528);
+ sizeimage[i] = clamp_t(u32, p->sizeimage,
+ bytesperline[i],
+ bytesperline[i] * 4096);
+ }
+
+ for (j = 0; j < video->nformats; j++)
+ if (pix_mp->pixelformat == video->formats[j].pixelformat)
+ break;
+
+ if (j == video->nformats)
+ j = 0; /* default format */
+
+ fi = &video->formats[j];
+ width = pix_mp->width;
+ height = pix_mp->height;
+
+ memset(pix_mp, 0, sizeof(*pix_mp));
+
+ pix_mp->pixelformat = fi->pixelformat;
+ pix_mp->width = clamp_t(u32, width, 1, 8191);
+ pix_mp->height = clamp_t(u32, height, 1, 8191);
+ pix_mp->num_planes = fi->planes;
+ for (i = 0; i < pix_mp->num_planes; i++) {
+ bpl = pix_mp->width / fi->hsub[i].numerator *
+ fi->hsub[i].denominator * fi->bpp[i] / 8;
+ bpl = ALIGN(bpl, video->bpl_alignment);
+ pix_mp->plane_fmt[i].bytesperline = bpl;
+ pix_mp->plane_fmt[i].sizeimage = pix_mp->height /
+ fi->vsub[i].numerator * fi->vsub[i].denominator * bpl;
+ }
+
+ pix_mp->field = V4L2_FIELD_NONE;
+ pix_mp->colorspace = V4L2_COLORSPACE_SRGB;
+ pix_mp->flags = 0;
+ pix_mp->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pix_mp->colorspace);
+ pix_mp->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
+ pix_mp->colorspace, pix_mp->ycbcr_enc);
+ pix_mp->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix_mp->colorspace);
+
+ if (video->line_based)
+ for (i = 0; i < pix_mp->num_planes; i++) {
+ p = &pix_mp->plane_fmt[i];
+ p->bytesperline = clamp_t(u32, p->bytesperline,
+ 1, 65528);
+ p->sizeimage = clamp_t(u32, p->sizeimage,
+ p->bytesperline,
+ p->bytesperline * 4096);
+ lines = p->sizeimage / p->bytesperline;
+
+ if (p->bytesperline < bytesperline[i])
+ p->bytesperline = ALIGN(bytesperline[i], 8);
+
+ if (p->sizeimage < p->bytesperline * lines)
+ p->sizeimage = p->bytesperline * lines;
+
+ if (p->sizeimage < sizeimage[i])
+ p->sizeimage = sizeimage[i];
+ }
+
+ return 0;
+}
+
+static int video_try_fmt(struct file *file, void *fh, struct v4l2_format *f)
+{
+ struct camss_video *video = video_drvdata(file);
+
+ return __video_try_fmt(video, f);
+}
+
+static int video_s_fmt(struct file *file, void *fh, struct v4l2_format *f)
+{
+ struct camss_video *video = video_drvdata(file);
+ int ret;
+
+ if (vb2_is_busy(&video->vb2_q))
+ return -EBUSY;
+
+ ret = __video_try_fmt(video, f);
+ if (ret < 0)
+ return ret;
+
+ video->active_fmt = *f;
+
+ return 0;
+}
+
+static int video_enum_input(struct file *file, void *fh,
+ struct v4l2_input *input)
+{
+ if (input->index > 0)
+ return -EINVAL;
+
+ strlcpy(input->name, "camera", sizeof(input->name));
+ input->type = V4L2_INPUT_TYPE_CAMERA;
+
+ return 0;
+}
+
+static int video_g_input(struct file *file, void *fh, unsigned int *input)
+{
+ *input = 0;
+
+ return 0;
+}
+
+static int video_s_input(struct file *file, void *fh, unsigned int input)
+{
+ return input == 0 ? 0 : -EINVAL;
+}
+
+static const struct v4l2_ioctl_ops msm_vid_ioctl_ops = {
+ .vidioc_querycap = video_querycap,
+ .vidioc_enum_fmt_vid_cap_mplane = video_enum_fmt,
+ .vidioc_g_fmt_vid_cap_mplane = video_g_fmt,
+ .vidioc_s_fmt_vid_cap_mplane = video_s_fmt,
+ .vidioc_try_fmt_vid_cap_mplane = video_try_fmt,
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+ .vidioc_enum_input = video_enum_input,
+ .vidioc_g_input = video_g_input,
+ .vidioc_s_input = video_s_input,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 file operations
+ */
+
+static int video_open(struct file *file)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct camss_video *video = video_drvdata(file);
+ struct v4l2_fh *vfh;
+ int ret;
+
+ mutex_lock(&video->lock);
+
+ vfh = kzalloc(sizeof(*vfh), GFP_KERNEL);
+ if (vfh == NULL) {
+ ret = -ENOMEM;
+ goto error_alloc;
+ }
+
+ v4l2_fh_init(vfh, vdev);
+ v4l2_fh_add(vfh);
+
+ file->private_data = vfh;
+
+ ret = v4l2_pipeline_pm_use(&vdev->entity, 1);
+ if (ret < 0) {
+ dev_err(video->camss->dev, "Failed to power up pipeline: %d\n",
+ ret);
+ goto error_pm_use;
+ }
+
+ mutex_unlock(&video->lock);
+
+ return 0;
+
+error_pm_use:
+ v4l2_fh_release(file);
+
+error_alloc:
+ mutex_unlock(&video->lock);
+
+ return ret;
+}
+
+static int video_release(struct file *file)
+{
+ struct video_device *vdev = video_devdata(file);
+
+ vb2_fop_release(file);
+
+ v4l2_pipeline_pm_use(&vdev->entity, 0);
+
+ file->private_data = NULL;
+
+ return 0;
+}
+
+static const struct v4l2_file_operations msm_vid_fops = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = video_ioctl2,
+ .open = video_open,
+ .release = video_release,
+ .poll = vb2_fop_poll,
+ .mmap = vb2_fop_mmap,
+ .read = vb2_fop_read,
+};
+
+/* -----------------------------------------------------------------------------
+ * CAMSS video core
+ */
+
+static void msm_video_release(struct video_device *vdev)
+{
+ struct camss_video *video = video_get_drvdata(vdev);
+
+ media_entity_cleanup(&vdev->entity);
+
+ mutex_destroy(&video->q_lock);
+ mutex_destroy(&video->lock);
+
+ if (atomic_dec_and_test(&video->camss->ref_count))
+ camss_delete(video->camss);
+}
+
+/*
+ * msm_video_init_format - Helper function to initialize format
+ * @video: struct camss_video
+ *
+ * Initialize pad format with default value.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int msm_video_init_format(struct camss_video *video)
+{
+ int ret;
+ struct v4l2_format format = {
+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE,
+ .fmt.pix_mp = {
+ .width = 1920,
+ .height = 1080,
+ .pixelformat = video->formats[0].pixelformat,
+ },
+ };
+
+ ret = __video_try_fmt(video, &format);
+ if (ret < 0)
+ return ret;
+
+ video->active_fmt = format;
+
+ return 0;
+}
+
+/*
+ * msm_video_register - Register a video device node
+ * @video: struct camss_video
+ * @v4l2_dev: V4L2 device
+ * @name: name to be used for the video device node
+ *
+ * Initialize and register a video device node to a V4L2 device. Also
+ * initialize the vb2 queue.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+
+int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,
+ const char *name, int is_pix)
+{
+ struct media_pad *pad = &video->pad;
+ struct video_device *vdev;
+ struct vb2_queue *q;
+ int ret;
+
+ vdev = &video->vdev;
+
+ mutex_init(&video->q_lock);
+
+ q = &video->vb2_q;
+ q->drv_priv = video;
+ q->mem_ops = &vb2_dma_sg_memops;
+ q->ops = &msm_video_vb2_q_ops;
+ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+ q->io_modes = VB2_DMABUF | VB2_MMAP | VB2_READ;
+ q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ q->buf_struct_size = sizeof(struct camss_buffer);
+ q->dev = video->camss->dev;
+ q->lock = &video->q_lock;
+ ret = vb2_queue_init(q);
+ if (ret < 0) {
+ dev_err(v4l2_dev->dev, "Failed to init vb2 queue: %d\n", ret);
+ goto error_vb2_init;
+ }
+
+ pad->flags = MEDIA_PAD_FL_SINK;
+ ret = media_entity_pads_init(&vdev->entity, 1, pad);
+ if (ret < 0) {
+ dev_err(v4l2_dev->dev, "Failed to init video entity: %d\n",
+ ret);
+ goto error_media_init;
+ }
+
+ mutex_init(&video->lock);
+
+ video->formats = formats_rdi;
+ video->nformats = ARRAY_SIZE(formats_rdi);
+ if (is_pix) {
+ video->formats = formats_pix;
+ video->nformats = ARRAY_SIZE(formats_pix);
+ }
+
+ ret = msm_video_init_format(video);
+ if (ret < 0) {
+ dev_err(v4l2_dev->dev, "Failed to init format: %d\n", ret);
+ goto error_video_register;
+ }
+
+ vdev->fops = &msm_vid_fops;
+ vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_STREAMING |
+ V4L2_CAP_READWRITE;
+ vdev->ioctl_ops = &msm_vid_ioctl_ops;
+ vdev->release = msm_video_release;
+ vdev->v4l2_dev = v4l2_dev;
+ vdev->vfl_dir = VFL_DIR_RX;
+ vdev->queue = &video->vb2_q;
+ vdev->lock = &video->lock;
+ strlcpy(vdev->name, name, sizeof(vdev->name));
+
+ ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
+ if (ret < 0) {
+ dev_err(v4l2_dev->dev, "Failed to register video device: %d\n",
+ ret);
+ goto error_video_register;
+ }
+
+ video_set_drvdata(vdev, video);
+ atomic_inc(&video->camss->ref_count);
+
+ return 0;
+
+error_video_register:
+ media_entity_cleanup(&vdev->entity);
+ mutex_destroy(&video->lock);
+error_media_init:
+ vb2_queue_release(&video->vb2_q);
+error_vb2_init:
+ mutex_destroy(&video->q_lock);
+
+ return ret;
+}
+
+void msm_video_stop_streaming(struct camss_video *video)
+{
+ if (vb2_is_streaming(&video->vb2_q))
+ vb2_queue_release(&video->vb2_q);
+}
+
+void msm_video_unregister(struct camss_video *video)
+{
+ atomic_inc(&video->camss->ref_count);
+ video_unregister_device(&video->vdev);
+ atomic_dec(&video->camss->ref_count);
+}
new file mode 100644
@@ -0,0 +1,70 @@
+/*
+ * camss-video.h
+ *
+ * Qualcomm MSM Camera Subsystem - V4L2 device node
+ *
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015-2018 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef QC_MSM_CAMSS_VIDEO_H
+#define QC_MSM_CAMSS_VIDEO_H
+
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <media/media-entity.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-mediabus.h>
+#include <media/videobuf2-v4l2.h>
+
+struct camss_buffer {
+ struct vb2_v4l2_buffer vb;
+ dma_addr_t addr[3];
+ struct list_head queue;
+};
+
+struct camss_video;
+
+struct camss_video_ops {
+ int (*queue_buffer)(struct camss_video *vid, struct camss_buffer *buf);
+ int (*flush_buffers)(struct camss_video *vid,
+ enum vb2_buffer_state state);
+};
+
+struct camss_format_info;
+
+struct camss_video {
+ struct camss *camss;
+ struct vb2_queue vb2_q;
+ struct video_device vdev;
+ struct media_pad pad;
+ struct v4l2_format active_fmt;
+ enum v4l2_buf_type type;
+ struct media_pipeline pipe;
+ const struct camss_video_ops *ops;
+ struct mutex lock;
+ struct mutex q_lock;
+ unsigned int bpl_alignment;
+ unsigned int line_based;
+ const struct camss_format_info *formats;
+ unsigned int nformats;
+};
+
+void msm_video_stop_streaming(struct camss_video *video);
+
+int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,
+ const char *name, int is_pix);
+
+void msm_video_unregister(struct camss_video *video);
+
+#endif /* QC_MSM_CAMSS_VIDEO_H */
new file mode 100644
@@ -0,0 +1,751 @@
+/*
+ * camss.c
+ *
+ * Qualcomm MSM Camera Subsystem - Core
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015-2018 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/clk.h>
+#include <linux/media-bus-format.h>
+#include <linux/media.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+
+#include <media/media-device.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-fwnode.h>
+
+#include "camss.h"
+
+#define CAMSS_CLOCK_MARGIN_NUMERATOR 105
+#define CAMSS_CLOCK_MARGIN_DENOMINATOR 100
+
+static const struct resources csiphy_res[] = {
+ /* CSIPHY0 */
+ {
+ .regulator = { NULL },
+ .clock = { "camss_top_ahb", "ispif_ahb",
+ "camss_ahb", "csiphy0_timer" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 0 },
+ { 100000000, 200000000 } },
+ .reg = { "csiphy0", "csiphy0_clk_mux" },
+ .interrupt = { "csiphy0" }
+ },
+
+ /* CSIPHY1 */
+ {
+ .regulator = { NULL },
+ .clock = { "camss_top_ahb", "ispif_ahb",
+ "camss_ahb", "csiphy1_timer" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 0 },
+ { 100000000, 200000000 } },
+ .reg = { "csiphy1", "csiphy1_clk_mux" },
+ .interrupt = { "csiphy1" }
+ }
+};
+
+static const struct resources csid_res[] = {
+ /* CSID0 */
+ {
+ .regulator = { "vdda" },
+ .clock = { "camss_top_ahb", "ispif_ahb",
+ "csi0_ahb", "camss_ahb",
+ "csi0", "csi0_phy", "csi0_pix", "csi0_rdi" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 100000000, 200000000 },
+ { 0 },
+ { 0 },
+ { 0 } },
+ .reg = { "csid0" },
+ .interrupt = { "csid0" }
+ },
+
+ /* CSID1 */
+ {
+ .regulator = { "vdda" },
+ .clock = { "camss_top_ahb", "ispif_ahb",
+ "csi1_ahb", "camss_ahb",
+ "csi1", "csi1_phy", "csi1_pix", "csi1_rdi" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 100000000, 200000000 },
+ { 0 },
+ { 0 },
+ { 0 } },
+ .reg = { "csid1" },
+ .interrupt = { "csid1" }
+ },
+};
+
+static const struct resources_ispif ispif_res = {
+ /* ISPIF */
+ .clock = { "camss_top_ahb", "camss_ahb", "ispif_ahb",
+ "csi0", "csi0_pix", "csi0_rdi",
+ "csi1", "csi1_pix", "csi1_rdi" },
+ .clock_for_reset = { "camss_vfe_vfe", "camss_csi_vfe" },
+ .reg = { "ispif", "csi_clk_mux" },
+ .interrupt = "ispif"
+
+};
+
+static const struct resources vfe_res = {
+ /* VFE0 */
+ .regulator = { NULL },
+ .clock = { "camss_top_ahb", "camss_vfe_vfe", "camss_csi_vfe",
+ "iface", "bus", "camss_ahb" },
+ .clock_rate = { { 0 },
+ { 50000000, 80000000, 100000000, 160000000,
+ 177780000, 200000000, 266670000, 320000000,
+ 400000000, 465000000 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 } },
+ .reg = { "vfe0" },
+ .interrupt = { "vfe0" }
+};
+
+/*
+ * camss_add_clock_margin - Add margin to clock frequency rate
+ * @rate: Clock frequency rate
+ *
+ * When making calculations with physical clock frequency values
+ * some safety margin must be added. Add it.
+ */
+inline void camss_add_clock_margin(u64 *rate)
+{
+ *rate *= CAMSS_CLOCK_MARGIN_NUMERATOR;
+ *rate = div_u64(*rate, CAMSS_CLOCK_MARGIN_DENOMINATOR);
+}
+
+/*
+ * camss_enable_clocks - Enable multiple clocks
+ * @nclocks: Number of clocks in clock array
+ * @clock: Clock array
+ * @dev: Device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int camss_enable_clocks(int nclocks, struct camss_clock *clock,
+ struct device *dev)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < nclocks; i++) {
+ ret = clk_prepare_enable(clock[i].clk);
+ if (ret) {
+ dev_err(dev, "clock enable failed: %d\n", ret);
+ goto error;
+ }
+ }
+
+ return 0;
+
+error:
+ for (i--; i >= 0; i--)
+ clk_disable_unprepare(clock[i].clk);
+
+ return ret;
+}
+
+/*
+ * camss_disable_clocks - Disable multiple clocks
+ * @nclocks: Number of clocks in clock array
+ * @clock: Clock array
+ */
+void camss_disable_clocks(int nclocks, struct camss_clock *clock)
+{
+ int i;
+
+ for (i = nclocks - 1; i >= 0; i--)
+ clk_disable_unprepare(clock[i].clk);
+}
+
+/*
+ * camss_find_sensor - Find a linked media entity which represents a sensor
+ * @entity: Media entity to start searching from
+ *
+ * Return a pointer to sensor media entity or NULL if not found
+ */
+static struct media_entity *camss_find_sensor(struct media_entity *entity)
+{
+ struct media_pad *pad;
+
+ while (1) {
+ pad = &entity->pads[0];
+ if (!(pad->flags & MEDIA_PAD_FL_SINK))
+ return NULL;
+
+ pad = media_entity_remote_pad(pad);
+ if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
+ return NULL;
+
+ entity = pad->entity;
+
+ if (entity->function == MEDIA_ENT_F_CAM_SENSOR)
+ return entity;
+ }
+}
+
+/*
+ * camss_get_pixel_clock - Get pixel clock rate from sensor
+ * @entity: Media entity in the current pipeline
+ * @pixel_clock: Received pixel clock value
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int camss_get_pixel_clock(struct media_entity *entity, u32 *pixel_clock)
+{
+ struct media_entity *sensor;
+ struct v4l2_subdev *subdev;
+ struct v4l2_ctrl *ctrl;
+
+ sensor = camss_find_sensor(entity);
+ if (!sensor)
+ return -ENODEV;
+
+ subdev = media_entity_to_v4l2_subdev(sensor);
+
+ ctrl = v4l2_ctrl_find(subdev->ctrl_handler, V4L2_CID_PIXEL_RATE);
+
+ if (!ctrl)
+ return -EINVAL;
+
+ *pixel_clock = v4l2_ctrl_g_ctrl_int64(ctrl);
+
+ return 0;
+}
+
+/*
+ * camss_of_parse_endpoint_node - Parse port endpoint node
+ * @dev: Device
+ * @node: Device node to be parsed
+ * @csd: Parsed data from port endpoint node
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+static int camss_of_parse_endpoint_node(struct device *dev,
+ struct device_node *node,
+ struct camss_async_subdev *csd)
+{
+ struct csiphy_lanes_cfg *lncfg = &csd->interface.csi2.lane_cfg;
+ struct v4l2_fwnode_bus_mipi_csi2 *mipi_csi2;
+ struct v4l2_fwnode_endpoint vep = { { 0 } };
+ unsigned int i;
+
+ v4l2_fwnode_endpoint_parse(of_fwnode_handle(node), &vep);
+
+ csd->interface.csiphy_id = vep.base.port;
+
+ mipi_csi2 = &vep.bus.mipi_csi2;
+ lncfg->clk.pos = mipi_csi2->clock_lane;
+ lncfg->clk.pol = mipi_csi2->lane_polarities[0];
+ lncfg->num_data = mipi_csi2->num_data_lanes;
+
+ lncfg->data = devm_kcalloc(dev,
+ lncfg->num_data, sizeof(*lncfg->data),
+ GFP_KERNEL);
+ if (!lncfg->data)
+ return -ENOMEM;
+
+ for (i = 0; i < lncfg->num_data; i++) {
+ lncfg->data[i].pos = mipi_csi2->data_lanes[i];
+ lncfg->data[i].pol = mipi_csi2->lane_polarities[i + 1];
+ }
+
+ return 0;
+}
+
+/*
+ * camss_of_parse_ports - Parse ports node
+ * @dev: Device
+ * @notifier: v4l2_device notifier data
+ *
+ * Return number of "port" nodes found in "ports" node
+ */
+static int camss_of_parse_ports(struct device *dev,
+ struct v4l2_async_notifier *notifier)
+{
+ struct device_node *node = NULL;
+ struct device_node *remote = NULL;
+ unsigned int size, i;
+ int ret;
+
+ while ((node = of_graph_get_next_endpoint(dev->of_node, node)))
+ if (of_device_is_available(node))
+ notifier->num_subdevs++;
+
+ size = sizeof(*notifier->subdevs) * notifier->num_subdevs;
+ notifier->subdevs = devm_kzalloc(dev, size, GFP_KERNEL);
+ if (!notifier->subdevs) {
+ dev_err(dev, "Failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ i = 0;
+ while ((node = of_graph_get_next_endpoint(dev->of_node, node))) {
+ struct camss_async_subdev *csd;
+
+ if (!of_device_is_available(node))
+ continue;
+
+ csd = devm_kzalloc(dev, sizeof(*csd), GFP_KERNEL);
+ if (!csd) {
+ of_node_put(node);
+ dev_err(dev, "Failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ notifier->subdevs[i++] = &csd->asd;
+
+ ret = camss_of_parse_endpoint_node(dev, node, csd);
+ if (ret < 0) {
+ of_node_put(node);
+ return ret;
+ }
+
+ remote = of_graph_get_remote_port_parent(node);
+ of_node_put(node);
+
+ if (!remote) {
+ dev_err(dev, "Cannot get remote parent\n");
+ return -EINVAL;
+ }
+
+ csd->asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
+ csd->asd.match.fwnode = of_fwnode_handle(remote);
+ }
+
+ return notifier->num_subdevs;
+}
+
+/*
+ * camss_init_subdevices - Initialize subdev structures and resources
+ * @camss: CAMSS device
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+static int camss_init_subdevices(struct camss *camss)
+{
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(camss->csiphy); i++) {
+ ret = msm_csiphy_subdev_init(&camss->csiphy[i],
+ &csiphy_res[i], i);
+ if (ret < 0) {
+ dev_err(camss->dev,
+ "Failed to init csiphy%d sub-device: %d\n",
+ i, ret);
+ return ret;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(camss->csid); i++) {
+ ret = msm_csid_subdev_init(&camss->csid[i],
+ &csid_res[i], i);
+ if (ret < 0) {
+ dev_err(camss->dev,
+ "Failed to init csid%d sub-device: %d\n",
+ i, ret);
+ return ret;
+ }
+ }
+
+ ret = msm_ispif_subdev_init(&camss->ispif, &ispif_res);
+ if (ret < 0) {
+ dev_err(camss->dev, "Failed to init ispif sub-device: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = msm_vfe_subdev_init(&camss->vfe, &vfe_res);
+ if (ret < 0) {
+ dev_err(camss->dev, "Fail to init vfe sub-device: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * camss_register_entities - Register subdev nodes and create links
+ * @camss: CAMSS device
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+static int camss_register_entities(struct camss *camss)
+{
+ int i, j;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(camss->csiphy); i++) {
+ ret = msm_csiphy_register_entity(&camss->csiphy[i],
+ &camss->v4l2_dev);
+ if (ret < 0) {
+ dev_err(camss->dev,
+ "Failed to register csiphy%d entity: %d\n",
+ i, ret);
+ goto err_reg_csiphy;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(camss->csid); i++) {
+ ret = msm_csid_register_entity(&camss->csid[i],
+ &camss->v4l2_dev);
+ if (ret < 0) {
+ dev_err(camss->dev,
+ "Failed to register csid%d entity: %d\n",
+ i, ret);
+ goto err_reg_csid;
+ }
+ }
+
+ ret = msm_ispif_register_entities(&camss->ispif, &camss->v4l2_dev);
+ if (ret < 0) {
+ dev_err(camss->dev, "Failed to register ispif entities: %d\n",
+ ret);
+ goto err_reg_ispif;
+ }
+
+ ret = msm_vfe_register_entities(&camss->vfe, &camss->v4l2_dev);
+ if (ret < 0) {
+ dev_err(camss->dev, "Failed to register vfe entities: %d\n",
+ ret);
+ goto err_reg_vfe;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(camss->csiphy); i++) {
+ for (j = 0; j < ARRAY_SIZE(camss->csid); j++) {
+ ret = media_create_pad_link(
+ &camss->csiphy[i].subdev.entity,
+ MSM_CSIPHY_PAD_SRC,
+ &camss->csid[j].subdev.entity,
+ MSM_CSID_PAD_SINK,
+ 0);
+ if (ret < 0) {
+ dev_err(camss->dev,
+ "Failed to link %s->%s entities: %d\n",
+ camss->csiphy[i].subdev.entity.name,
+ camss->csid[j].subdev.entity.name,
+ ret);
+ goto err_link;
+ }
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(camss->csid); i++) {
+ for (j = 0; j < ARRAY_SIZE(camss->ispif.line); j++) {
+ ret = media_create_pad_link(
+ &camss->csid[i].subdev.entity,
+ MSM_CSID_PAD_SRC,
+ &camss->ispif.line[j].subdev.entity,
+ MSM_ISPIF_PAD_SINK,
+ 0);
+ if (ret < 0) {
+ dev_err(camss->dev,
+ "Failed to link %s->%s entities: %d\n",
+ camss->csid[i].subdev.entity.name,
+ camss->ispif.line[j].subdev.entity.name,
+ ret);
+ goto err_link;
+ }
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(camss->ispif.line); i++) {
+ for (j = 0; j < ARRAY_SIZE(camss->vfe.line); j++) {
+ ret = media_create_pad_link(
+ &camss->ispif.line[i].subdev.entity,
+ MSM_ISPIF_PAD_SRC,
+ &camss->vfe.line[j].subdev.entity,
+ MSM_VFE_PAD_SINK,
+ 0);
+ if (ret < 0) {
+ dev_err(camss->dev,
+ "Failed to link %s->%s entities: %d\n",
+ camss->ispif.line[i].subdev.entity.name,
+ camss->vfe.line[j].subdev.entity.name,
+ ret);
+ goto err_link;
+ }
+ }
+ }
+
+ return 0;
+
+err_link:
+ msm_vfe_unregister_entities(&camss->vfe);
+err_reg_vfe:
+ msm_ispif_unregister_entities(&camss->ispif);
+err_reg_ispif:
+
+ i = ARRAY_SIZE(camss->csid);
+err_reg_csid:
+ for (i--; i >= 0; i--)
+ msm_csid_unregister_entity(&camss->csid[i]);
+
+ i = ARRAY_SIZE(camss->csiphy);
+err_reg_csiphy:
+ for (i--; i >= 0; i--)
+ msm_csiphy_unregister_entity(&camss->csiphy[i]);
+
+ return ret;
+}
+
+/*
+ * camss_unregister_entities - Unregister subdev nodes
+ * @camss: CAMSS device
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+static void camss_unregister_entities(struct camss *camss)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(camss->csiphy); i++)
+ msm_csiphy_unregister_entity(&camss->csiphy[i]);
+
+ for (i = 0; i < ARRAY_SIZE(camss->csid); i++)
+ msm_csid_unregister_entity(&camss->csid[i]);
+
+ msm_ispif_unregister_entities(&camss->ispif);
+ msm_vfe_unregister_entities(&camss->vfe);
+}
+
+static int camss_subdev_notifier_bound(struct v4l2_async_notifier *async,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct camss *camss = container_of(async, struct camss, notifier);
+ struct camss_async_subdev *csd =
+ container_of(asd, struct camss_async_subdev, asd);
+ u8 id = csd->interface.csiphy_id;
+ struct csiphy_device *csiphy = &camss->csiphy[id];
+
+ csiphy->cfg.csi2 = &csd->interface.csi2;
+ subdev->host_priv = csiphy;
+
+ return 0;
+}
+
+static int camss_subdev_notifier_complete(struct v4l2_async_notifier *async)
+{
+ struct camss *camss = container_of(async, struct camss, notifier);
+ struct v4l2_device *v4l2_dev = &camss->v4l2_dev;
+ struct v4l2_subdev *sd;
+ int ret;
+
+ list_for_each_entry(sd, &v4l2_dev->subdevs, list) {
+ if (sd->host_priv) {
+ struct media_entity *sensor = &sd->entity;
+ struct csiphy_device *csiphy =
+ (struct csiphy_device *) sd->host_priv;
+ struct media_entity *input = &csiphy->subdev.entity;
+ unsigned int i;
+
+ for (i = 0; i < sensor->num_pads; i++) {
+ if (sensor->pads[i].flags & MEDIA_PAD_FL_SOURCE)
+ break;
+ }
+ if (i == sensor->num_pads) {
+ dev_err(camss->dev,
+ "No source pad in external entity\n");
+ return -EINVAL;
+ }
+
+ ret = media_create_pad_link(sensor, i,
+ input, MSM_CSIPHY_PAD_SINK,
+ MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED);
+ if (ret < 0) {
+ dev_err(camss->dev,
+ "Failed to link %s->%s entities: %d\n",
+ sensor->name, input->name, ret);
+ return ret;
+ }
+ }
+ }
+
+ ret = v4l2_device_register_subdev_nodes(&camss->v4l2_dev);
+ if (ret < 0)
+ return ret;
+
+ return media_device_register(&camss->media_dev);
+}
+
+static const struct v4l2_async_notifier_operations camss_subdev_notifier_ops = {
+ .bound = camss_subdev_notifier_bound,
+ .complete = camss_subdev_notifier_complete,
+};
+
+static const struct media_device_ops camss_media_ops = {
+ .link_notify = v4l2_pipeline_link_notify,
+};
+
+/*
+ * camss_probe - Probe CAMSS platform device
+ * @pdev: Pointer to CAMSS platform device
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+static int camss_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct camss *camss;
+ int ret;
+
+ camss = kzalloc(sizeof(*camss), GFP_KERNEL);
+ if (!camss)
+ return -ENOMEM;
+
+ atomic_set(&camss->ref_count, 0);
+ camss->dev = dev;
+ platform_set_drvdata(pdev, camss);
+
+ ret = camss_of_parse_ports(dev, &camss->notifier);
+ if (ret < 0)
+ return ret;
+
+ ret = camss_init_subdevices(camss);
+ if (ret < 0)
+ return ret;
+
+ ret = dma_set_mask_and_coherent(dev, 0xffffffff);
+ if (ret)
+ return ret;
+
+ camss->media_dev.dev = camss->dev;
+ strlcpy(camss->media_dev.model, "Qualcomm Camera Subsystem",
+ sizeof(camss->media_dev.model));
+ camss->media_dev.ops = &camss_media_ops;
+ media_device_init(&camss->media_dev);
+
+ camss->v4l2_dev.mdev = &camss->media_dev;
+ ret = v4l2_device_register(camss->dev, &camss->v4l2_dev);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register V4L2 device: %d\n", ret);
+ return ret;
+ }
+
+ ret = camss_register_entities(camss);
+ if (ret < 0)
+ goto err_register_entities;
+
+ if (camss->notifier.num_subdevs) {
+ camss->notifier.ops = &camss_subdev_notifier_ops;
+
+ ret = v4l2_async_notifier_register(&camss->v4l2_dev,
+ &camss->notifier);
+ if (ret) {
+ dev_err(dev,
+ "Failed to register async subdev nodes: %d\n",
+ ret);
+ goto err_register_subdevs;
+ }
+ } else {
+ ret = v4l2_device_register_subdev_nodes(&camss->v4l2_dev);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register subdev nodes: %d\n",
+ ret);
+ goto err_register_subdevs;
+ }
+
+ ret = media_device_register(&camss->media_dev);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register media device: %d\n",
+ ret);
+ goto err_register_subdevs;
+ }
+ }
+
+ return 0;
+
+err_register_subdevs:
+ camss_unregister_entities(camss);
+err_register_entities:
+ v4l2_device_unregister(&camss->v4l2_dev);
+
+ return ret;
+}
+
+void camss_delete(struct camss *camss)
+{
+ v4l2_device_unregister(&camss->v4l2_dev);
+ media_device_unregister(&camss->media_dev);
+ media_device_cleanup(&camss->media_dev);
+
+ kfree(camss);
+}
+
+/*
+ * camss_remove - Remove CAMSS platform device
+ * @pdev: Pointer to CAMSS platform device
+ *
+ * Always returns 0.
+ */
+static int camss_remove(struct platform_device *pdev)
+{
+ struct camss *camss = platform_get_drvdata(pdev);
+
+ msm_vfe_stop_streaming(&camss->vfe);
+
+ v4l2_async_notifier_unregister(&camss->notifier);
+ camss_unregister_entities(camss);
+
+ if (atomic_read(&camss->ref_count) == 0)
+ camss_delete(camss);
+
+ return 0;
+}
+
+static const struct of_device_id camss_dt_match[] = {
+ { .compatible = "qcom,msm8916-camss" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, camss_dt_match);
+
+static struct platform_driver qcom_camss_driver = {
+ .probe = camss_probe,
+ .remove = camss_remove,
+ .driver = {
+ .name = "qcom-camss",
+ .of_match_table = camss_dt_match,
+ },
+};
+
+module_platform_driver(qcom_camss_driver);
+
+MODULE_ALIAS("platform:qcom-camss");
+MODULE_DESCRIPTION("Qualcomm Camera Subsystem driver");
+MODULE_AUTHOR("Todor Tomov <todor.tomov@linaro.org>");
+MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,106 @@
+/*
+ * camss.h
+ *
+ * Qualcomm MSM Camera Subsystem - Core
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015-2018 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef QC_MSM_CAMSS_H
+#define QC_MSM_CAMSS_H
+
+#include <linux/types.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+#include <media/media-device.h>
+#include <media/media-entity.h>
+#include <linux/device.h>
+
+#include "camss-csid.h"
+#include "camss-csiphy.h"
+#include "camss-ispif.h"
+#include "camss-vfe.h"
+
+#define CAMSS_CSID_NUM 2
+#define CAMSS_CSIPHY_NUM 2
+
+#define to_camss(ptr_module) \
+ container_of(ptr_module, struct camss, ptr_module)
+
+#define to_device(ptr_module) \
+ (to_camss(ptr_module)->dev)
+
+#define module_pointer(ptr_module, index) \
+ ((const struct ptr_module##_device (*)[]) &(ptr_module[-(index)]))
+
+#define to_camss_index(ptr_module, index) \
+ container_of(module_pointer(ptr_module, index), \
+ struct camss, ptr_module)
+
+#define to_device_index(ptr_module, index) \
+ (to_camss_index(ptr_module, index)->dev)
+
+#define CAMSS_RES_MAX 15
+
+struct resources {
+ char *regulator[CAMSS_RES_MAX];
+ char *clock[CAMSS_RES_MAX];
+ u32 clock_rate[CAMSS_RES_MAX][CAMSS_RES_MAX];
+ char *reg[CAMSS_RES_MAX];
+ char *interrupt[CAMSS_RES_MAX];
+};
+
+struct resources_ispif {
+ char *clock[CAMSS_RES_MAX];
+ char *clock_for_reset[CAMSS_RES_MAX];
+ char *reg[CAMSS_RES_MAX];
+ char *interrupt;
+};
+
+struct camss {
+ struct v4l2_device v4l2_dev;
+ struct v4l2_async_notifier notifier;
+ struct media_device media_dev;
+ struct device *dev;
+ struct csiphy_device csiphy[CAMSS_CSIPHY_NUM];
+ struct csid_device csid[CAMSS_CSID_NUM];
+ struct ispif_device ispif;
+ struct vfe_device vfe;
+ atomic_t ref_count;
+};
+
+struct camss_camera_interface {
+ u8 csiphy_id;
+ struct csiphy_csi2_cfg csi2;
+};
+
+struct camss_async_subdev {
+ struct camss_camera_interface interface;
+ struct v4l2_async_subdev asd;
+};
+
+struct camss_clock {
+ struct clk *clk;
+ const char *name;
+ u32 *freq;
+ u32 nfreqs;
+};
+
+void camss_add_clock_margin(u64 *rate);
+int camss_enable_clocks(int nclocks, struct camss_clock *clock,
+ struct device *dev);
+void camss_disable_clocks(int nclocks, struct camss_clock *clock);
+int camss_get_pixel_clock(struct media_entity *entity, u32 *pixel_clock);
+void camss_delete(struct camss *camss);
+
+#endif /* QC_MSM_CAMSS_H */
Support for camera subsystem on QComm MSM8996/APQ8096 is to be added so remove hardware version from CAMSS driver's path. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> --- MAINTAINERS | 2 +- drivers/media/platform/Kconfig | 2 +- drivers/media/platform/Makefile | 2 +- drivers/media/platform/qcom/camss-8x16/Makefile | 11 - .../media/platform/qcom/camss-8x16/camss-csid.c | 1094 ------- .../media/platform/qcom/camss-8x16/camss-csid.h | 82 - .../media/platform/qcom/camss-8x16/camss-csiphy.c | 893 ------ .../media/platform/qcom/camss-8x16/camss-csiphy.h | 77 - .../media/platform/qcom/camss-8x16/camss-ispif.c | 1178 -------- .../media/platform/qcom/camss-8x16/camss-ispif.h | 85 - drivers/media/platform/qcom/camss-8x16/camss-vfe.c | 3093 -------------------- drivers/media/platform/qcom/camss-8x16/camss-vfe.h | 123 - .../media/platform/qcom/camss-8x16/camss-video.c | 859 ------ .../media/platform/qcom/camss-8x16/camss-video.h | 70 - drivers/media/platform/qcom/camss-8x16/camss.c | 751 ----- drivers/media/platform/qcom/camss-8x16/camss.h | 106 - drivers/media/platform/qcom/camss/Makefile | 11 + drivers/media/platform/qcom/camss/camss-csid.c | 1094 +++++++ drivers/media/platform/qcom/camss/camss-csid.h | 82 + drivers/media/platform/qcom/camss/camss-csiphy.c | 893 ++++++ drivers/media/platform/qcom/camss/camss-csiphy.h | 77 + drivers/media/platform/qcom/camss/camss-ispif.c | 1178 ++++++++ drivers/media/platform/qcom/camss/camss-ispif.h | 85 + drivers/media/platform/qcom/camss/camss-vfe.c | 3093 ++++++++++++++++++++ drivers/media/platform/qcom/camss/camss-vfe.h | 123 + drivers/media/platform/qcom/camss/camss-video.c | 859 ++++++ drivers/media/platform/qcom/camss/camss-video.h | 70 + drivers/media/platform/qcom/camss/camss.c | 751 +++++ drivers/media/platform/qcom/camss/camss.h | 106 + 29 files changed, 8425 insertions(+), 8425 deletions(-) delete mode 100644 drivers/media/platform/qcom/camss-8x16/Makefile delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-csid.c delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-csid.h delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-csiphy.c delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-csiphy.h delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-ispif.c delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-ispif.h delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-vfe.c delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-vfe.h delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-video.c delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss-video.h delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss.c delete mode 100644 drivers/media/platform/qcom/camss-8x16/camss.h create mode 100644 drivers/media/platform/qcom/camss/Makefile create mode 100644 drivers/media/platform/qcom/camss/camss-csid.c create mode 100644 drivers/media/platform/qcom/camss/camss-csid.h create mode 100644 drivers/media/platform/qcom/camss/camss-csiphy.c create mode 100644 drivers/media/platform/qcom/camss/camss-csiphy.h create mode 100644 drivers/media/platform/qcom/camss/camss-ispif.c create mode 100644 drivers/media/platform/qcom/camss/camss-ispif.h create mode 100644 drivers/media/platform/qcom/camss/camss-vfe.c create mode 100644 drivers/media/platform/qcom/camss/camss-vfe.h create mode 100644 drivers/media/platform/qcom/camss/camss-video.c create mode 100644 drivers/media/platform/qcom/camss/camss-video.h create mode 100644 drivers/media/platform/qcom/camss/camss.c create mode 100644 drivers/media/platform/qcom/camss/camss.h -- 2.7.4