diff mbox series

[v2,4/8] scsi: hisi_sas: fix the issue of setting linkrate register

Message ID 1520003182-26277-5-git-send-email-john.garry@huawei.com
State Superseded
Headers show
Series hisi_sas: support x6000 board and some misc changes | expand

Commit Message

John Garry March 2, 2018, 3:06 p.m. UTC 
From: Xiaofei Tan <tanxiaofei@huawei.com>


It is not right to set the register PROG_PHY_LINK_RATE while PHY
is still enabled. So if we want to change PHY linkrate, we need to
disable PHY before setting the register PROG_PHY_LINK_RATE, and then
start-up PHY. This patch is to fix this issue.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>

Signed-off-by: John Garry <john.garry@huawei.com>

---
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 5 +++--
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 5 +++--
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 5 +++--
 3 files changed, 9 insertions(+), 6 deletions(-)

-- 
1.9.1
diff mbox series

Patch

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 38bbda9..2eb8980 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -881,10 +881,11 @@  static void phy_set_linkrate_v1_hw(struct hisi_hba *hisi_hba, int phy_no,
 	prog_phy_link_rate &= ~0xff;
 	prog_phy_link_rate |= rate_mask;
 
+	disable_phy_v1_hw(hisi_hba, phy_no);
+	msleep(100);
 	hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
 			prog_phy_link_rate);
-
-	phy_hard_reset_v1_hw(hisi_hba, phy_no);
+	start_phy_v1_hw(hisi_hba, phy_no);
 }
 
 static int get_wideport_bitmap_v1_hw(struct hisi_hba *hisi_hba, int port_id)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index edd0c89..80fd4f4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -1611,10 +1611,11 @@  static void phy_set_linkrate_v2_hw(struct hisi_hba *hisi_hba, int phy_no,
 	prog_phy_link_rate &= ~0xff;
 	prog_phy_link_rate |= rate_mask;
 
+	disable_phy_v2_hw(hisi_hba, phy_no);
+	msleep(100);
 	hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
 			prog_phy_link_rate);
-
-	phy_hard_reset_v2_hw(hisi_hba, phy_no);
+	start_phy_v2_hw(hisi_hba, phy_no);
 }
 
 static int get_wideport_bitmap_v2_hw(struct hisi_hba *hisi_hba, int port_id)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 1ee95ab..8da9de7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1862,10 +1862,11 @@  static void phy_set_linkrate_v3_hw(struct hisi_hba *hisi_hba, int phy_no,
 	prog_phy_link_rate &= ~0xff;
 	prog_phy_link_rate |= rate_mask;
 
+	disable_phy_v3_hw(hisi_hba, phy_no);
+	msleep(100);
 	hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
 			prog_phy_link_rate);
-
-	phy_hard_reset_v3_hw(hisi_hba, phy_no);
+	start_phy_v3_hw(hisi_hba, phy_no);
 }
 
 static void interrupt_disable_v3_hw(struct hisi_hba *hisi_hba)