@@ -30,6 +30,8 @@
#define TEMP0_TH (0x4)
#define TEMP0_RST_TH (0x8)
#define TEMP0_CFG (0xC)
+#define TEMP0_CFG_SS_MSK (0xF000)
+#define TEMP0_CFG_HDAK_MSK (0x30)
#define TEMP0_EN (0x10)
#define TEMP0_INT_EN (0x14)
#define TEMP0_INT_CLR (0x18)
@@ -132,19 +134,41 @@ static inline void hisi_thermal_enable(void __iomem *addr, int value)
writel(value, addr + TEMP0_EN);
}
-static inline void hisi_thermal_sensor_select(void __iomem *addr, int sensor)
+static inline int hisi_thermal_get_temperature(void __iomem *addr)
{
- writel((sensor << 12), addr + TEMP0_CFG);
+ return hisi_thermal_step_to_temp(readl(addr + TEMP0_VALUE));
}
-static inline int hisi_thermal_get_temperature(void __iomem *addr)
+/*
+ * Temperature configuration register - Sensor selection
+ *
+ * Bits [19:12]
+ *
+ * 0x0: local sensor (default)
+ * 0x1: remote sensor 1 (ACPU cluster 1)
+ * 0x2: remote sensor 2 (ACPU cluster 0)
+ * 0x3: remote sensor 3 (G3D)
+ */
+static inline void hisi_thermal_sensor_select(void __iomem *addr, int sensor)
{
- return hisi_thermal_step_to_temp(readl(addr + TEMP0_VALUE));
+ writel((readl(addr + TEMP0_CFG) & ~TEMP0_CFG_SS_MSK ) |
+ (sensor << 12), addr + TEMP0_CFG);
}
+/*
+ * Temperature configuration register - Hdak conversion polling interval
+ *
+ * Bits [5:4]
+ *
+ * 0x0 : 0.768 ms
+ * 0x1 : 6.144 ms
+ * 0x2 : 49.152 ms
+ * 0x3 : 393.216 ms
+ */
static inline void hisi_thermal_hdak_set(void __iomem *addr, int value)
{
- writel(value, addr + TEMP0_CFG);
+ writel((readl(addr + TEMP0_CFG) & ~TEMP0_CFG_HDAK_MSK) |
+ (value << 4), addr + TEMP0_CFG);
}
static long hisi_thermal_get_sensor_temp(struct hisi_thermal_data *data,
The TEMP0_CFG configuration register contains different field to set up the temperature controller. However in the code, nothing prevents a setup to overwrite the previous one: eg. writing the hdak value overwrites the sensor selection, the sensor selection overwrites the hdak value. In order to prevent such thing, use a regmap-like mechanism by reading the value before, set the corresponding bits and write the result. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> --- drivers/thermal/hisi_thermal.c | 34 +++++++++++++++++++++++++++++----- 1 file changed, 29 insertions(+), 5 deletions(-) -- 2.7.4