@@ -125,7 +125,7 @@ static int qpnp_tm_get_temp(void *data, int *temp)
if (!temp)
return -EINVAL;
- if (IS_ERR(chip->adc)) {
+ if (!chip->adc) {
ret = qpnp_tm_update_temp_no_adc(chip);
if (ret < 0)
return ret;
@@ -224,67 +224,53 @@ static int qpnp_tm_probe(struct platform_device *pdev)
return irq;
/* ADC based measurements are optional */
- chip->adc = iio_channel_get(&pdev->dev, "thermal");
- if (PTR_ERR(chip->adc) == -EPROBE_DEFER)
- return PTR_ERR(chip->adc);
+ chip->adc = devm_iio_channel_get(&pdev->dev, "thermal");
+ if (IS_ERR(chip->adc)) {
+ ret = PTR_ERR(chip->adc);
+ chip->adc = NULL;
+ if (ret == -EPROBE_DEFER)
+ return ret;
+ }
chip->base = res;
ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type);
if (ret < 0) {
dev_err(&pdev->dev, "could not read type\n");
- goto fail;
+ return ret;
}
ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype);
if (ret < 0) {
dev_err(&pdev->dev, "could not read subtype\n");
- goto fail;
+ return ret;
}
if (type != QPNP_TM_TYPE || subtype != QPNP_TM_SUBTYPE) {
dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n",
type, subtype);
- ret = -ENODEV;
- goto fail;
+ return -ENODEV;
}
ret = qpnp_tm_init(chip);
if (ret < 0) {
dev_err(&pdev->dev, "init failed\n");
- goto fail;
+ return ret;
}
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, qpnp_tm_isr,
IRQF_ONESHOT, node->name, chip);
if (ret < 0)
- goto fail;
+ return ret;
chip->tz_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, chip,
&qpnp_tm_sensor_ops);
if (IS_ERR(chip->tz_dev)) {
dev_err(&pdev->dev, "failed to register sensor\n");
- ret = PTR_ERR(chip->tz_dev);
- goto fail;
+ return PTR_ERR(chip->tz_dev);
}
return 0;
-
-fail:
- if (!IS_ERR(chip->adc))
- iio_channel_release(chip->adc);
-
- return ret;
-}
-
-static int qpnp_tm_remove(struct platform_device *pdev)
-{
- struct qpnp_tm_chip *chip = dev_get_drvdata(&pdev->dev);
-
- if (!IS_ERR(chip->adc))
- iio_channel_release(chip->adc);
-
- return 0;
}
static const struct of_device_id qpnp_tm_match_table[] = {
@@ -299,7 +285,6 @@ static struct platform_driver qpnp_tm_driver = {
.of_match_table = qpnp_tm_match_table,
},
.probe = qpnp_tm_probe,
- .remove = qpnp_tm_remove,
};
module_platform_driver(qpnp_tm_driver);
The iio_channel_get() function has now its devm_ version. Use it and remove all the rollback code for iio_channel_release() as well as the .remove ops. [Compiled tested only] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> --- drivers/thermal/qcom-spmi-temp-alarm.c | 43 +++++++++++----------------------- 1 file changed, 14 insertions(+), 29 deletions(-) -- 2.7.4