From patchwork Mon Jun 5 23:21:49 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Masahiro Yamada X-Patchwork-Id: 103115 Delivered-To: patch@linaro.org Received: by 10.182.29.35 with SMTP id g3csp1009455obh; Mon, 5 Jun 2017 16:29:04 -0700 (PDT) X-Received: by 10.84.217.11 with SMTP id o11mr17854289pli.299.1496705344354; Mon, 05 Jun 2017 16:29:04 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1496705344; cv=none; d=google.com; s=arc-20160816; b=Oj/yKVvX1WeVCdrAA+cAQnELf7qgja6TMYMWI9WgFKtOekKFqXhFGvVqu4R2fZqtYB GjM4NjKj0eOo7Sob3iN+vUQ/ZVanCLjHuyYBvOqevlHd6f5aSwmcjLwyiUmO7efXK3Gt hpUgFjTlPXoJX0o61HdBm8inqRa8AoD3/DjoADKh1x8yYpJ7nolNw/x1ljf09cbcVTLB k833SXy5gKDh2xrJg4NCUhxDmQxnO5LzVBLNsvzqFMGQvcC0rYg3EmoogpOsSa+PR5gT xttoDSv5VS5rcqL7uJmJObbvXrj41Ki7Lb2VlLOrFZhRMzRP9am91SDN2lOkK+FTst76 859Q== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:message-id:date :subject:cc:to:from:dkim-signature:dkim-filter :arc-authentication-results; bh=Yv2ttUKu/e5roGaKNaZ0vIp08ZxY9w4jhuSnNzS5/WQ=; b=N8mhUy4XAElVEM2vcxzv5gYi7dNWYr4WU4taA3/CJ2HgoufVK3dKu62E0S4iGhMxUL jLQmSt7jWXFGvoURUiorpdzO/RRJKdWa5WS1wv9EEuLwuzmle7WyiWy9DwmjCsM3W6w4 DQopTbJCUgB3g7lFisQTPdQxQ3idLC/aWSwtJ6b8Qk3TY6wJgQn5Y34JCFgJwJ8+XTes uk7qkqd4TD6HUu55neopkRQ/EToJwrl049RR4mXpG/MRtewFN2tfDtFT+E72NIuWDPl8 5g3oH9YQW9p/0RZdruXZAIZjQvMOYWurEtJahW9OpfTntbsYntZ3zYaUdYtsI49wx+Oa tYXQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@nifty.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id b1si8302122pll.359.2017.06.05.16.29.04; Mon, 05 Jun 2017 16:29:04 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@nifty.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751511AbdFEX2I (ORCPT + 25 others); Mon, 5 Jun 2017 19:28:08 -0400 Received: from conuserg-10.nifty.com ([210.131.2.77]:32182 "EHLO conuserg-10.nifty.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751294AbdFEXZS (ORCPT ); Mon, 5 Jun 2017 19:25:18 -0400 Received: from grover.sesame (FL1-118-110-19-204.osk.mesh.ad.jp [118.110.19.204]) (authenticated) by conuserg-10.nifty.com with ESMTP id v55NMD5k004412; Tue, 6 Jun 2017 08:22:39 +0900 DKIM-Filter: OpenDKIM Filter v2.10.3 conuserg-10.nifty.com v55NMD5k004412 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=nifty.com; s=dec2015msa; t=1496704960; bh=Yv2ttUKu/e5roGaKNaZ0vIp08ZxY9w4jhuSnNzS5/WQ=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=Zndek0uo9rwJRFgMw6u7LDuvFRDvUydAkpbOXe0x8mD2d/KSF12Z4BjrpQXfJYtx1 w4bE5kLt+pv9B1Y8YPa59xTLkpaylwGMDz57NuwXAvb9VdBoIp4kvFUgk+18247wRA l7DsBahTdwN1tlMeAitnNnkmR+GRlmRpFzNZLtkCnzLJ9bIc2iGnwLLK4N0s73lCjo JJkTJp652Si1wRthROqVLXsnQ/p2ALWiCvAb9rdw80RjfxTmI60cR3yGJrLoxQ3XRG oKTQH3NMTrOSrGUy/pFt6S1NFWCEKJalYxEPIhQwIsZjf2ZwJaWhZFVhZ6Syl1QCKJ 94F4UWaEUliCg== X-Nifty-SrcIP: [118.110.19.204] From: Masahiro Yamada To: linux-mtd@lists.infradead.org Cc: Enrico Jorns , Artem Bityutskiy , Dinh Nguyen , Boris Brezillon , Marek Vasut , Graham Moore , David Woodhouse , Masami Hiramatsu , Chuanxiao Dong , Jassi Brar , Masahiro Yamada , Cyrille Pitchen , linux-kernel@vger.kernel.org, Brian Norris , Richard Weinberger Subject: [PATCH v4 10/23] mtd: nand: denali: handle timing parameters by setup_data_interface() Date: Tue, 6 Jun 2017 08:21:49 +0900 Message-Id: <1496704922-12261-11-git-send-email-yamada.masahiro@socionext.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1496704922-12261-1-git-send-email-yamada.masahiro@socionext.com> References: <1496704922-12261-1-git-send-email-yamada.masahiro@socionext.com> Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Handling timing parameters in a driver's own way should be avoided because it duplicates efforts of drivers/mtd/nand/nand_timings.c Besides, this driver hard-codes Intel specific parameters such as CLK_X=5, CLK_MULTI=4. Taking a certain device (Samsung K9WAG08U1A) into account by get_samsung_nand_para() is weird as well. Now, the core framework provides .setup_data_interface() hook, which handles timing parameters in a generic manner. While I am working on this, I found even more issues in the current code, so fixed the following as well: - In recent IP versions, WE_2_RE and TWHR2 share the same register. Likewise for ADDR_2_DATA and TCWAW, CS_SETUP_CNT and TWB. When updating one, the other must be masked. Otherwise, the other will be set to 0, then timing settings will be broken. - The recent IP release expanded the ADDR_2_DATA to 7-bit wide. This register is related to tADL. As commit 74a332e78e8f ("mtd: nand: timings: Fix tADL_min for ONFI 4.0 chips") addressed, the ONFi 4.0 increased the minimum of tADL to 400 nsec. This may not fit in the 6-bit ADDR_2_DATA in older versions. Check the IP revision and handle this correctly, otherwise the register value would wrap around. Signed-off-by: Masahiro Yamada --- Changes in v4: None Changes in v3: None Changes in v2: - Newly added drivers/mtd/nand/denali.c | 351 +++++++++++++++--------------------------- drivers/mtd/nand/denali.h | 26 ++-- drivers/mtd/nand/denali_dt.c | 3 +- drivers/mtd/nand/denali_pci.c | 6 +- 4 files changed, 142 insertions(+), 244 deletions(-) -- 2.7.4 diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index a289011..1bb57de 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -28,17 +28,6 @@ MODULE_LICENSE("GPL"); -/* - * We define a module parameter that allows the user to override - * the hardware and decide what timing mode should be used. - */ -#define NAND_DEFAULT_TIMINGS -1 - -static int onfi_timing_mode = NAND_DEFAULT_TIMINGS; -module_param(onfi_timing_mode, int, S_IRUGO); -MODULE_PARM_DESC(onfi_timing_mode, - "Overrides default ONFI setting. -1 indicates use default timings"); - #define DENALI_NAND_NAME "denali-nand" /* @@ -63,12 +52,6 @@ MODULE_PARM_DESC(onfi_timing_mode, #define CHIP_SELECT_INVALID -1 /* - * This macro divides two integers and rounds fractional values up - * to the nearest integer value. - */ -#define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y))) - -/* * this macro allows us to convert from an MTD structure to our own * device context (denali) structure. */ @@ -103,6 +86,14 @@ static void denali_irq_enable(struct denali_nand_info *denali, static uint32_t read_interrupt_status(struct denali_nand_info *denali); /* + * The bus interface clock, clk_x, is phase aligned with the core clock. The + * clk_x is an integral multiple N of the core clk. The value N is configured + * at IP delivery time, and its available value is 4, 5, or 6. We need to align + * to the largest value to make it work with any possible configuration. + */ +#define DENALI_CLK_X_MULT 6 + +/* * Certain operations for the denali NAND controller use an indexed mode to * read/write data. The operation is performed by writing the address value * of the command to the device memory followed by the data. This function @@ -196,148 +187,6 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali) } /* - * this routine calculates the ONFI timing values for a given mode and - * programs the clocking register accordingly. The mode is determined by - * the get_onfi_nand_para routine. - */ -static void nand_onfi_timing_set(struct denali_nand_info *denali, - uint16_t mode) -{ - uint16_t Trea[6] = {40, 30, 25, 20, 20, 16}; - uint16_t Trp[6] = {50, 25, 17, 15, 12, 10}; - uint16_t Treh[6] = {30, 15, 15, 10, 10, 7}; - uint16_t Trc[6] = {100, 50, 35, 30, 25, 20}; - uint16_t Trhoh[6] = {0, 15, 15, 15, 15, 15}; - uint16_t Trloh[6] = {0, 0, 0, 0, 5, 5}; - uint16_t Tcea[6] = {100, 45, 30, 25, 25, 25}; - uint16_t Tadl[6] = {200, 100, 100, 100, 70, 70}; - uint16_t Trhw[6] = {200, 100, 100, 100, 100, 100}; - uint16_t Trhz[6] = {200, 100, 100, 100, 100, 100}; - uint16_t Twhr[6] = {120, 80, 80, 60, 60, 60}; - uint16_t Tcs[6] = {70, 35, 25, 25, 20, 15}; - - uint16_t data_invalid_rhoh, data_invalid_rloh, data_invalid; - uint16_t dv_window = 0; - uint16_t en_lo, en_hi; - uint16_t acc_clks; - uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt; - - en_lo = CEIL_DIV(Trp[mode], CLK_X); - en_hi = CEIL_DIV(Treh[mode], CLK_X); -#if ONFI_BLOOM_TIME - if ((en_hi * CLK_X) < (Treh[mode] + 2)) - en_hi++; -#endif - - if ((en_lo + en_hi) * CLK_X < Trc[mode]) - en_lo += CEIL_DIV((Trc[mode] - (en_lo + en_hi) * CLK_X), CLK_X); - - if ((en_lo + en_hi) < CLK_MULTI) - en_lo += CLK_MULTI - en_lo - en_hi; - - while (dv_window < 8) { - data_invalid_rhoh = en_lo * CLK_X + Trhoh[mode]; - - data_invalid_rloh = (en_lo + en_hi) * CLK_X + Trloh[mode]; - - data_invalid = data_invalid_rhoh < data_invalid_rloh ? - data_invalid_rhoh : data_invalid_rloh; - - dv_window = data_invalid - Trea[mode]; - - if (dv_window < 8) - en_lo++; - } - - acc_clks = CEIL_DIV(Trea[mode], CLK_X); - - while (acc_clks * CLK_X - Trea[mode] < 3) - acc_clks++; - - if (data_invalid - acc_clks * CLK_X < 2) - dev_warn(denali->dev, "%s, Line %d: Warning!\n", - __FILE__, __LINE__); - - addr_2_data = CEIL_DIV(Tadl[mode], CLK_X); - re_2_we = CEIL_DIV(Trhw[mode], CLK_X); - re_2_re = CEIL_DIV(Trhz[mode], CLK_X); - we_2_re = CEIL_DIV(Twhr[mode], CLK_X); - cs_cnt = CEIL_DIV((Tcs[mode] - Trp[mode]), CLK_X); - if (cs_cnt == 0) - cs_cnt = 1; - - if (Tcea[mode]) { - while (cs_cnt * CLK_X + Trea[mode] < Tcea[mode]) - cs_cnt++; - } - -#if MODE5_WORKAROUND - if (mode == 5) - acc_clks = 5; -#endif - - /* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */ - if (ioread32(denali->flash_reg + MANUFACTURER_ID) == 0 && - ioread32(denali->flash_reg + DEVICE_ID) == 0x88) - acc_clks = 6; - - iowrite32(acc_clks, denali->flash_reg + ACC_CLKS); - iowrite32(re_2_we, denali->flash_reg + RE_2_WE); - iowrite32(re_2_re, denali->flash_reg + RE_2_RE); - iowrite32(we_2_re, denali->flash_reg + WE_2_RE); - iowrite32(addr_2_data, denali->flash_reg + ADDR_2_DATA); - iowrite32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT); - iowrite32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT); - iowrite32(cs_cnt, denali->flash_reg + CS_SETUP_CNT); -} - -/* queries the NAND device to see what ONFI modes it supports. */ -static uint16_t get_onfi_nand_para(struct denali_nand_info *denali) -{ - int i; - - /* - * we needn't to do a reset here because driver has already - * reset all the banks before - */ - if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) & - ONFI_TIMING_MODE__VALUE)) - return FAIL; - - for (i = 5; i > 0; i--) { - if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) & - (0x01 << i)) - break; - } - - nand_onfi_timing_set(denali, i); - - /* - * By now, all the ONFI devices we know support the page cache - * rw feature. So here we enable the pipeline_rw_ahead feature - */ - /* iowrite32(1, denali->flash_reg + CACHE_WRITE_ENABLE); */ - /* iowrite32(1, denali->flash_reg + CACHE_READ_ENABLE); */ - - return PASS; -} - -static void get_samsung_nand_para(struct denali_nand_info *denali, - uint8_t device_id) -{ - if (device_id == 0xd3) { /* Samsung K9WAG08U1A */ - /* Set timing register values according to datasheet */ - iowrite32(5, denali->flash_reg + ACC_CLKS); - iowrite32(20, denali->flash_reg + RE_2_WE); - iowrite32(12, denali->flash_reg + WE_2_RE); - iowrite32(14, denali->flash_reg + ADDR_2_DATA); - iowrite32(3, denali->flash_reg + RDWR_EN_LO_CNT); - iowrite32(2, denali->flash_reg + RDWR_EN_HI_CNT); - iowrite32(2, denali->flash_reg + CS_SETUP_CNT); - } -} - -/* * Use the configuration feature register to determine the maximum number of * banks that the hardware supports. */ @@ -352,58 +201,6 @@ static void detect_max_banks(struct denali_nand_info *denali) denali->max_banks <<= 1; } -static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) -{ - uint16_t status = PASS; - uint32_t id_bytes[8], addr; - uint8_t maf_id, device_id; - int i; - - /* - * Use read id method to get device ID and other params. - * For some NAND chips, controller can't report the correct - * device ID by reading from DEVICE_ID register - */ - addr = MODE_11 | BANK(denali->flash_bank); - index_addr(denali, addr | 0, 0x90); - index_addr(denali, addr | 1, 0); - for (i = 0; i < 8; i++) - index_addr_read_data(denali, addr | 2, &id_bytes[i]); - maf_id = id_bytes[0]; - device_id = id_bytes[1]; - - if (ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) & - ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */ - if (FAIL == get_onfi_nand_para(denali)) - return FAIL; - } else if (maf_id == 0xEC) { /* Samsung NAND */ - get_samsung_nand_para(denali, device_id); - } - - dev_info(denali->dev, - "Dump timing register values:\n" - "acc_clks: %d, re_2_we: %d, re_2_re: %d\n" - "we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n" - "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n", - ioread32(denali->flash_reg + ACC_CLKS), - ioread32(denali->flash_reg + RE_2_WE), - ioread32(denali->flash_reg + RE_2_RE), - ioread32(denali->flash_reg + WE_2_RE), - ioread32(denali->flash_reg + ADDR_2_DATA), - ioread32(denali->flash_reg + RDWR_EN_LO_CNT), - ioread32(denali->flash_reg + RDWR_EN_HI_CNT), - ioread32(denali->flash_reg + CS_SETUP_CNT)); - - /* - * If the user specified to override the default timings - * with a specific ONFI mode, we apply those changes here. - */ - if (onfi_timing_mode != NAND_DEFAULT_TIMINGS) - nand_onfi_timing_set(denali, onfi_timing_mode); - - return status; -} - static void denali_set_intr_modes(struct denali_nand_info *denali, uint16_t INT_ENABLE) { @@ -1209,7 +1006,122 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, break; } } -/* end NAND core entry points */ + +#define DIV_ROUND_DOWN_ULL(ll, d) \ + ({ unsigned long long _tmp = (ll); do_div(_tmp, d); _tmp; }) + +static int denali_setup_data_interface(struct mtd_info *mtd, + const struct nand_data_interface *conf, + bool check_only) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + const struct nand_sdr_timings *timings; + unsigned long t_clk; + int acc_clks, re_2_we, re_2_re, we_2_re, addr_2_data; + int rdwr_en_lo, rdwr_en_hi, rdwr_en_lo_hi, cs_setup; + int addr_2_data_mask; + uint32_t tmp; + + timings = nand_get_sdr_timings(conf); + if (IS_ERR(timings)) + return PTR_ERR(timings); + + /* clk_x period in picoseconds */ + t_clk = DIV_ROUND_DOWN_ULL(1000000000000ULL, denali->clk_x_rate); + if (!t_clk) + return -EINVAL; + + if (check_only) + return 0; + + /* tREA -> ACC_CLKS */ + acc_clks = DIV_ROUND_UP(timings->tREA_max, t_clk); + acc_clks = min_t(int, acc_clks, ACC_CLKS__VALUE); + + tmp = ioread32(denali->flash_reg + ACC_CLKS); + tmp &= ~ACC_CLKS__VALUE; + tmp |= acc_clks; + iowrite32(tmp, denali->flash_reg + ACC_CLKS); + + /* tRWH -> RE_2_WE */ + re_2_we = DIV_ROUND_UP(timings->tRHW_min, t_clk); + re_2_we = min_t(int, re_2_we, RE_2_WE__VALUE); + + tmp = ioread32(denali->flash_reg + RE_2_WE); + tmp &= ~RE_2_WE__VALUE; + tmp |= re_2_we; + iowrite32(tmp, denali->flash_reg + RE_2_WE); + + /* tRHZ -> RE_2_RE */ + re_2_re = DIV_ROUND_UP(timings->tRHZ_max, t_clk); + re_2_re = min_t(int, re_2_re, RE_2_RE__VALUE); + + tmp = ioread32(denali->flash_reg + RE_2_RE); + tmp &= ~RE_2_RE__VALUE; + tmp |= re_2_re; + iowrite32(tmp, denali->flash_reg + RE_2_RE); + + /* tWHR -> WE_2_RE */ + we_2_re = DIV_ROUND_UP(timings->tWHR_min, t_clk); + we_2_re = min_t(int, we_2_re, TWHR2_AND_WE_2_RE__WE_2_RE); + + tmp = ioread32(denali->flash_reg + TWHR2_AND_WE_2_RE); + tmp &= ~TWHR2_AND_WE_2_RE__WE_2_RE; + tmp |= we_2_re; + iowrite32(tmp, denali->flash_reg + TWHR2_AND_WE_2_RE); + + /* tADL -> ADDR_2_DATA */ + + /* for older versions, ADDR_2_DATA is only 6 bit wide */ + addr_2_data_mask = TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA; + if (denali->revision < 0x0501) + addr_2_data_mask >>= 1; + + addr_2_data = DIV_ROUND_UP(timings->tADL_min, t_clk); + addr_2_data = min_t(int, addr_2_data, addr_2_data_mask); + + tmp = ioread32(denali->flash_reg + TCWAW_AND_ADDR_2_DATA); + tmp &= ~addr_2_data_mask; + tmp |= addr_2_data; + iowrite32(tmp, denali->flash_reg + TCWAW_AND_ADDR_2_DATA); + + /* tREH, tWH -> RDWR_EN_HI_CNT */ + rdwr_en_hi = DIV_ROUND_UP(max(timings->tREH_min, timings->tWH_min), + t_clk); + rdwr_en_hi = min_t(int, rdwr_en_hi, RDWR_EN_HI_CNT__VALUE); + + tmp = ioread32(denali->flash_reg + RDWR_EN_HI_CNT); + tmp &= ~RDWR_EN_HI_CNT__VALUE; + tmp |= rdwr_en_hi; + iowrite32(tmp, denali->flash_reg + RDWR_EN_HI_CNT); + + /* tRP, tWP -> RDWR_EN_LO_CNT */ + rdwr_en_lo = DIV_ROUND_UP(max(timings->tRP_min, timings->tWP_min), + t_clk); + rdwr_en_lo_hi = DIV_ROUND_UP(max(timings->tRC_min, timings->tWC_min), + t_clk); + rdwr_en_lo_hi = max(rdwr_en_lo_hi, DENALI_CLK_X_MULT); + rdwr_en_lo = max(rdwr_en_lo, rdwr_en_lo_hi - rdwr_en_hi); + rdwr_en_lo = min_t(int, rdwr_en_lo, RDWR_EN_LO_CNT__VALUE); + + tmp = ioread32(denali->flash_reg + RDWR_EN_LO_CNT); + tmp &= ~RDWR_EN_LO_CNT__VALUE; + tmp |= rdwr_en_lo; + iowrite32(tmp, denali->flash_reg + RDWR_EN_LO_CNT); + + /* tCS, tCEA -> CS_SETUP_CNT */ + cs_setup = max3((int)DIV_ROUND_UP(timings->tCS_min, t_clk) - rdwr_en_lo, + (int)DIV_ROUND_UP(timings->tCEA_max, t_clk) - acc_clks, + 0); + cs_setup = min_t(int, cs_setup, CS_SETUP_CNT__VALUE); + + tmp = ioread32(denali->flash_reg + CS_SETUP_CNT); + tmp &= ~CS_SETUP_CNT__VALUE; + tmp |= cs_setup; + iowrite32(tmp, denali->flash_reg + CS_SETUP_CNT); + + return 0; +} /* Initialization code to bring the device up to a known good state */ static void denali_hw_init(struct denali_nand_info *denali) @@ -1241,7 +1153,6 @@ static void denali_hw_init(struct denali_nand_info *denali) /* Should set value for these registers when init */ iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES); iowrite32(1, denali->flash_reg + ECC_ENABLE); - denali_nand_timing_set(denali); denali_irq_init(denali); } @@ -1432,17 +1343,6 @@ int denali_init(struct denali_nand_info *denali) struct mtd_info *mtd = nand_to_mtd(chip); int ret; - if (denali->platform == INTEL_CE4100) { - /* - * Due to a silicon limitation, we can only support - * ONFI timing mode 1 and below. - */ - if (onfi_timing_mode < -1 || onfi_timing_mode > 1) { - pr_err("Intel CE4100 only supports ONFI timing mode 1 or below\n"); - return -EINVAL; - } - } - /* allocate a temporary buffer for nand_scan_ident() */ denali->buf.buf = devm_kzalloc(denali->dev, PAGE_SIZE, GFP_DMA | GFP_KERNEL); @@ -1473,6 +1373,9 @@ int denali_init(struct denali_nand_info *denali) chip->cmdfunc = denali_cmdfunc; chip->read_byte = denali_read_byte; chip->waitfunc = denali_waitfunc; + /* clk rate info is needed for setup_data_interface */ + if (denali->clk_x_rate) + chip->setup_data_interface = denali_setup_data_interface; /* * scan for NAND devices attached to the controller diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index 80767cf..f0f4d75 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -72,11 +72,14 @@ #define GLOBAL_INT_ENABLE 0xf0 #define GLOBAL_INT_EN_FLAG BIT(0) -#define WE_2_RE 0x100 -#define WE_2_RE__VALUE GENMASK(5, 0) +#define TWHR2_AND_WE_2_RE 0x100 +#define TWHR2_AND_WE_2_RE__WE_2_RE GENMASK(5, 0) +#define TWHR2_AND_WE_2_RE__TWHR2 GENMASK(13, 8) -#define ADDR_2_DATA 0x110 -#define ADDR_2_DATA__VALUE GENMASK(5, 0) +#define TCWAW_AND_ADDR_2_DATA 0x110 +/* The width of ADDR_2_DATA is 6 bit for old IP, 7 bit for new IP */ +#define TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA GENMASK(6, 0) +#define TCWAW_AND_ADDR_2_DATA__TCWAW GENMASK(13, 8) #define RE_2_WE 0x120 #define RE_2_WE__VALUE GENMASK(5, 0) @@ -128,6 +131,7 @@ #define CS_SETUP_CNT 0x220 #define CS_SETUP_CNT__VALUE GENMASK(4, 0) +#define CS_SETUP_CNT__TWB GENMASK(17, 12) #define SPARE_AREA_SKIP_BYTES 0x230 #define SPARE_AREA_SKIP_BYTES__VALUE GENMASK(5, 0) @@ -294,16 +298,8 @@ #define CHNL_ACTIVE__CHANNEL2 BIT(2) #define CHNL_ACTIVE__CHANNEL3 BIT(3) -#define FAIL 1 /*failed flag*/ #define PASS 0 /*success flag*/ -#define CLK_X 5 -#define CLK_MULTI 4 - -#define ONFI_BLOOM_TIME 1 -#define MODE5_WORKAROUND 0 - - #define MODE_00 0x00000000 #define MODE_01 0x04000000 #define MODE_10 0x08000000 @@ -316,14 +312,10 @@ struct nand_buf { dma_addr_t dma_buf; }; -#define INTEL_CE4100 1 -#define INTEL_MRST 2 -#define DT 3 - struct denali_nand_info { struct nand_chip nand; + unsigned long clk_x_rate; /* bus interface clock rate */ int flash_bank; /* currently selected chip */ - int platform; struct nand_buf buf; struct device *dev; int page; diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c index 38800ae..56bfff0 100644 --- a/drivers/mtd/nand/denali_dt.c +++ b/drivers/mtd/nand/denali_dt.c @@ -105,7 +105,6 @@ static int denali_dt_probe(struct platform_device *pdev) denali->stepinfo = &data->stepinfo; } - denali->platform = DT; denali->dev = &pdev->dev; denali->irq = platform_get_irq(pdev, 0); if (denali->irq < 0) { @@ -130,6 +129,8 @@ static int denali_dt_probe(struct platform_device *pdev) } clk_prepare_enable(dt->clk); + denali->clk_x_rate = clk_get_rate(dt->clk); + ret = denali_init(denali); if (ret) goto out_disable_clk; diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c index e0d50b6..8a66254 100644 --- a/drivers/mtd/nand/denali_pci.c +++ b/drivers/mtd/nand/denali_pci.c @@ -19,6 +19,9 @@ #define DENALI_NAND_NAME "denali-nand-pci" +#define INTEL_CE4100 1 +#define INTEL_MRST 2 + /* List of platforms this NAND controller has be integrated into */ static const struct pci_device_id denali_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 }, @@ -52,13 +55,11 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } if (id->driver_data == INTEL_CE4100) { - denali->platform = INTEL_CE4100; mem_base = pci_resource_start(dev, 0); mem_len = pci_resource_len(dev, 1); csr_base = pci_resource_start(dev, 1); csr_len = pci_resource_len(dev, 1); } else { - denali->platform = INTEL_MRST; csr_base = pci_resource_start(dev, 0); csr_len = pci_resource_len(dev, 0); mem_base = pci_resource_start(dev, 1); @@ -74,6 +75,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) denali->irq = dev->irq; denali->stepinfo = &denali_pci_stepinfo; denali->nand.ecc.options |= NAND_ECC_MAXIMIZE; + denali->clk_x_rate = 200000000; /* 200 MHz */ ret = pci_request_regions(dev, DENALI_NAND_NAME); if (ret) {