diff mbox series

[RESEND,v3,7/7] PCI: dwc: dra7xx: Push request_irq call to the bottom of probe

Message ID 1489041545-15730-8-git-send-email-kishon@ti.com
State Superseded
Headers show
Series [RESEND,v3,1/7] PCI: dwc: designware: Add new *ops* for cpu addr fixup | expand

Commit Message

Kishon Vijay Abraham I March 9, 2017, 6:39 a.m. UTC 
From: Keerthy <j-keerthy@ti.com>


Currently devm_request_irq is being called before base, pci fields
of dra7xx_pcie structure are populated. It is called even before
pm_runtime_enable and pm_runtime_get_sync are called. This will
lead to exceptions if in case an interrupt is triggered before
the all of the above are done. Hence push the devm_request_irq
call to the end of the probe.

Signed-off-by: Keerthy <j-keerthy@ti.com>

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

---
 drivers/pci/dwc/pci-dra7xx.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

-- 
1.7.9.5
diff mbox series

Patch

diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index c6fef0a..8c53233 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -410,13 +410,6 @@  static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	ret = devm_request_irq(dev, irq, dra7xx_pcie_irq_handler,
-			       IRQF_SHARED, "dra7xx-pcie-main", dra7xx);
-	if (ret) {
-		dev_err(dev, "failed to request irq\n");
-		return ret;
-	}
-
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ti_conf");
 	base = devm_ioremap_nocache(dev, res->start, resource_size(res));
 	if (!base)
@@ -478,6 +471,13 @@  static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_gpio;
 
+	ret = devm_request_irq(dev, irq, dra7xx_pcie_irq_handler,
+			       IRQF_SHARED, "dra7xx-pcie-main", dra7xx);
+	if (ret) {
+		dev_err(dev, "failed to request irq\n");
+		goto err_gpio;
+	}
+
 	return 0;
 
 err_gpio: