From patchwork Tue Jan 26 01:37:51 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: John Stultz X-Patchwork-Id: 60432 Delivered-To: patches@linaro.org Received: by 10.112.130.2 with SMTP id oa2csp1690268lbb; Mon, 25 Jan 2016 17:38:04 -0800 (PST) X-Received: by 10.67.15.2 with SMTP id fk2mr29230275pad.99.1453772282228; Mon, 25 Jan 2016 17:38:02 -0800 (PST) Return-Path: Received: from mail-pf0-x235.google.com (mail-pf0-x235.google.com. [2607:f8b0:400e:c00::235]) by mx.google.com with ESMTPS id o6si37504063pfa.166.2016.01.25.17.38.01 for (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Mon, 25 Jan 2016 17:38:02 -0800 (PST) Received-SPF: pass (google.com: domain of john.stultz@linaro.org designates 2607:f8b0:400e:c00::235 as permitted sender) client-ip=2607:f8b0:400e:c00::235; Authentication-Results: mx.google.com; spf=pass (google.com: domain of john.stultz@linaro.org designates 2607:f8b0:400e:c00::235 as permitted sender) smtp.mailfrom=john.stultz@linaro.org; dkim=pass header.i=@linaro.org Received: by mail-pf0-x235.google.com with SMTP id e65so91358371pfe.0 for ; Mon, 25 Jan 2016 17:38:01 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=JY2kBaneJfKVZSRpbhbvAIPq2eeDv/d5kESsd8DtE6o=; b=BGR1g6JWvvo9zDYkeyEpwk6Zk6nv8nyUsqt6ffYVvnaOD8LM5pI9Migwlb2bPv8sZb aE2/N+JdDOJHMi4pbC7TJaQBPv+iEgyKlGjMcX0uB9Pi4mywyZrBmEIF1aQFVLjaOuNo qs9o9msWS0dpRySh5IGXddBv8x4l37+PORIA4= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=JY2kBaneJfKVZSRpbhbvAIPq2eeDv/d5kESsd8DtE6o=; b=OaWv2stRBGruEU4n9OIlrOBFZdDqH8SVLErPLYUbgzXqOjdg+Vxh0ouvIuqKaIN9AD p9TMlQZFFXd1jd/F8CtDKybV5Ve00Kl/vS/vEukyYM22J/pjkoWthJo71oUjVhjjPrLb u+RTU7YsnpN8GzVfI8j1wxhOmZrMSeTk9C99YK2S52gMvoZZP1onRiI0QHeNmxBBy22b Y06HxA2VwIKMhWK2u8yGmJmU5cmQNENdRRsV+djm196zYYAWyHulSKJLv1QiBOK0yIF6 8a8Bpn1S+5RayXRflGdnMmlxvM+/MmhMvx59orMEy1dREqZ3YjOFxTF0z+b7lqEZfwKk Y+hA== X-Gm-Message-State: AG10YOT5eKoiHveVzntEUmhzpE2OxGLgzb0rpoAp7gLJreBaPUmF9mF0c4uCAdgUxwK/3YWuGNo= X-Received: by 10.98.9.220 with SMTP id 89mr30480906pfj.17.1453772281825; Mon, 25 Jan 2016 17:38:01 -0800 (PST) Return-Path: Received: from localhost.localdomain (c-76-115-103-22.hsd1.or.comcast.net. [76.115.103.22]) by smtp.gmail.com with ESMTPSA id e82sm31418600pfb.76.2016.01.25.17.38.00 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Mon, 25 Jan 2016 17:38:01 -0800 (PST) From: John Stultz To: lkml Cc: John Stultz , Rob Herring , Arnd Bergmann , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Andy Gross , Russell King , Vinay Simha BN , Bjorn Andersson , devicetree@vger.kernel.org Subject: [RESEND][PATCH 2/2] devicetree: Add DTS file to support the Nexus7 2013 (flo) device. Date: Mon, 25 Jan 2016 17:37:51 -0800 Message-Id: <1453772271-15339-2-git-send-email-john.stultz@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1453772271-15339-1-git-send-email-john.stultz@linaro.org> References: <1453772271-15339-1-git-send-email-john.stultz@linaro.org> This patch adds a dts file to support the Nexus7 2013 device. Its based off of the qcom-apq8064-ifc6410.dts which is similar hardware. Also includes some comments and context folded in from Vinay Simha BN Cc: Rob Herring Cc: Arnd Bergmann Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Andy Gross Cc: Russell King Cc: Vinay Simha BN Cc: Bjorn Andersson Cc: devicetree@vger.kernel.org Signed-off-by: John Stultz --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 276 +++++++++++++++++++++ 2 files changed, 277 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts -- 1.9.1 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a4a6d70..5b16715 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -524,6 +524,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8064-sony-xperia-yuga.dtb \ + qcom-apq8064-asus-nexus7-flo.dts \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts new file mode 100644 index 0000000..c535b3f --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -0,0 +1,276 @@ +#include "qcom-apq8064-v2.0.dtsi" +#include +#include +#include +/ { + model = "Asus Nexus7(flo)"; + compatible = "asus,nexus7-flo", "qcom,apq8064"; + + aliases { + serial0 = &gsbi7_serial; + serial1 = &gsbi6_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_3p3v: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + regulator-type = "voltage"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + power { + label = "Power"; + gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + linux,code = ; + gpio-key,wakeup; + }; + volume_up { + label = "Volume Up"; + gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + volume_down { + label = "Volume Down"; + gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; + + soc { + rpm@108000 { + regulators { + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vin_lvs2-supply = <&pm8921_s1>; + + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + vdd_ncp-supply = <&pm8921_l6>; + + /* Buck SMPS */ + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + /* msm otg HSUSB_VDDCX */ + s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + }; + + /* + * msm_sdcc.1-sdc-vdd_io + * tabla2x-slim-CDC_VDDA_RX + * tabla2x-slim-CDC_VDDA_TX + * tabla2x-slim-CDC_VDD_CP + * tabla2x-slim-VDDIO_CDC + */ + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + regulator-always-on; + }; + + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + /* mipi_dsi.1-dsi1_pll_vdda */ + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + /* msm_otg-HSUSB_3p3 */ + l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + /* msm_otg-HSUSB_1p8 */ + l4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + /* msm_sdcc.1-sdc_vdd */ + l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + bias-pull-down; + }; + + l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + /* mipi_dsi.1-dsi1_avdd */ + l11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + /* pwm_power for backlight */ + l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + bias-pull-down; + }; + + /* camera, qdsp6 */ + l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + /* + * tabla2x-slim-CDC_VDDA_A_1P2V + * tabla2x-slim-VDDD_CDC_D + */ + l25 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + lvs1 { + bias-pull-down; + }; + + lvs4 { + bias-pull-down; + }; + + lvs5 { + bias-pull-down; + }; + + lvs6 { + bias-pull-down; + }; + /* + * mipi_dsi.1-dsi1_vddio + * pil_riva-pll_vdd + */ + lvs7 { + bias-pull-down; + }; + }; + }; + + gsbi@16200000 { + status = "okay"; + qcom,mode = ; + i2c@16280000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + trackpad@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&tlmm_pinmux>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + }; + }; + }; + + + gsbi@12440000 { + status = "okay"; + qcom,mode = ; + + i2c@12460000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; + }; + }; + + gsbi@16500000 { + status = "ok"; + qcom,mode = ; + + serial@16540000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&gsbi6_uart_4pins>; + }; + }; + + gsbi@16600000 { + status = "ok"; + qcom,mode = ; + serial@16640000 { + status = "ok"; + }; + }; + + /* OTG */ + phy@12500000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + gadget@12500000 { + status = "okay"; + }; + + /* OTG */ + usb@12500000 { + status = "okay"; + }; + + amba { + /* eMMC */ + sdcc@12400000 { + status = "okay"; + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + }; + }; + }; +};