From patchwork Mon May 30 14:52:19 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Shawn Guo X-Patchwork-Id: 1672 Return-Path: Delivered-To: unknown Received: from imap.gmail.com (74.125.159.109) by localhost6.localdomain6 with IMAP4-SSL; 08 Jun 2011 14:54:13 -0000 Delivered-To: patches@linaro.org Received: by 10.52.110.9 with SMTP id hw9cs241824vdb; Mon, 30 May 2011 07:44:57 -0700 (PDT) Received: by 10.42.223.4 with SMTP id ii4mr9401043icb.132.1306766697036; Mon, 30 May 2011 07:44:57 -0700 (PDT) Received: from mail-pv0-f178.google.com (mail-pv0-f178.google.com [74.125.83.178]) by mx.google.com with ESMTPS id g4si22043582ick.148.2011.05.30.07.44.56 (version=TLSv1/SSLv3 cipher=OTHER); Mon, 30 May 2011 07:44:57 -0700 (PDT) Received-SPF: neutral (google.com: 74.125.83.178 is neither permitted nor denied by best guess record for domain of shawn.guo@linaro.org) client-ip=74.125.83.178; Authentication-Results: mx.google.com; spf=neutral (google.com: 74.125.83.178 is neither permitted nor denied by best guess record for domain of shawn.guo@linaro.org) smtp.mail=shawn.guo@linaro.org Received: by pvg7 with SMTP id 7so1883401pvg.37 for ; Mon, 30 May 2011 07:44:56 -0700 (PDT) Received: by 10.68.17.164 with SMTP id p4mr1936567pbd.328.1306766696144; Mon, 30 May 2011 07:44:56 -0700 (PDT) Received: from localhost.localdomain ([114.219.82.203]) by mx.google.com with ESMTPS id i7sm2926678pbj.42.2011.05.30.07.44.43 (version=TLSv1/SSLv3 cipher=OTHER); Mon, 30 May 2011 07:44:55 -0700 (PDT) From: Shawn Guo To: linux-kernel@vger.kernel.org Cc: grant.likely@secretlab.ca, arnd@arndb.de, kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org, patches@linaro.org, Shawn Guo Subject: [PATCH 4/4] ARM: mxc: remove plat-mxc/gpio driver Date: Mon, 30 May 2011 22:52:19 +0800 Message-Id: <1306767139-24763-5-git-send-email-shawn.guo@linaro.org> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1306767139-24763-1-git-send-email-shawn.guo@linaro.org> References: <1306767139-24763-1-git-send-email-shawn.guo@linaro.org> With all users of plat-mxc/gpio migrated to drivers/gpio/gpio-mxc, plat-mxc/gpio can be removed now. And plat-mxc/include/mach/gpio.h can also be cleaned up as below. * Remove the helper macros for gpio ports definition * Move "struct mxc_gpio_port" into drivers/gpio/gpio-mxc.c, as it's not needed to be public at all Signed-off-by: Shawn Guo --- arch/arm/plat-mxc/Makefile | 2 +- arch/arm/plat-mxc/gpio.c | 361 --------------------------------- arch/arm/plat-mxc/include/mach/gpio.h | 29 --- drivers/gpio/gpio-mxc.c | 12 + 4 files changed, 13 insertions(+), 391 deletions(-) delete mode 100644 arch/arm/plat-mxc/gpio.c diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index a138787..d53c35f 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o gpio.o time.o devices.o cpu.o system.o irq-common.o +obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o # MX51 uses the TZIC interrupt controller, older platforms use AVIC obj-$(CONFIG_MXC_TZIC) += tzic.o diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c deleted file mode 100644 index 6cd6d7f..0000000 --- a/arch/arm/plat-mxc/gpio.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * MXC GPIO support. (c) 2008 Daniel Mack - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * Based on code from Freescale, - * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include -#include - -static struct mxc_gpio_port *mxc_gpio_ports; -static int gpio_table_size; - -#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2()) - -#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00) -#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04) -#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08) -#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C) -#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10) -#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14) -#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18) - -#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0) -#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1) -#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2) -#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3) -#define GPIO_INT_NONE 0x4 - -/* Note: This driver assumes 32 GPIOs are handled in one register */ - -static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index) -{ - __raw_writel(1 << index, port->base + GPIO_ISR); -} - -static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index, - int enable) -{ - u32 l; - - l = __raw_readl(port->base + GPIO_IMR); - l = (l & (~(1 << index))) | (!!enable << index); - __raw_writel(l, port->base + GPIO_IMR); -} - -static void gpio_ack_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f); -} - -static void gpio_mask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0); -} - -static void gpio_unmask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1); -} - -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset); - -static int gpio_set_irq_type(struct irq_data *d, u32 type) -{ - u32 gpio = irq_to_gpio(d->irq); - struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; - u32 bit, val; - int edge; - void __iomem *reg = port->base; - - port->both_edges &= ~(1 << (gpio & 31)); - switch (type) { - case IRQ_TYPE_EDGE_RISING: - edge = GPIO_INT_RISE_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - edge = GPIO_INT_FALL_EDGE; - break; - case IRQ_TYPE_EDGE_BOTH: - val = mxc_gpio_get(&port->chip, gpio & 31); - if (val) { - edge = GPIO_INT_LOW_LEV; - pr_debug("mxc: set GPIO %d to low trigger\n", gpio); - } else { - edge = GPIO_INT_HIGH_LEV; - pr_debug("mxc: set GPIO %d to high trigger\n", gpio); - } - port->both_edges |= 1 << (gpio & 31); - break; - case IRQ_TYPE_LEVEL_LOW: - edge = GPIO_INT_LOW_LEV; - break; - case IRQ_TYPE_LEVEL_HIGH: - edge = GPIO_INT_HIGH_LEV; - break; - default: - return -EINVAL; - } - - reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ - bit = gpio & 0xf; - val = __raw_readl(reg) & ~(0x3 << (bit << 1)); - __raw_writel(val | (edge << (bit << 1)), reg); - _clear_gpio_irqstatus(port, gpio & 0x1f); - - return 0; -} - -static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) -{ - void __iomem *reg = port->base; - u32 bit, val; - int edge; - - reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ - bit = gpio & 0xf; - val = __raw_readl(reg); - edge = (val >> (bit << 1)) & 3; - val &= ~(0x3 << (bit << 1)); - if (edge == GPIO_INT_HIGH_LEV) { - edge = GPIO_INT_LOW_LEV; - pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); - } else if (edge == GPIO_INT_LOW_LEV) { - edge = GPIO_INT_HIGH_LEV; - pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); - } else { - pr_err("mxc: invalid configuration for GPIO %d: %x\n", - gpio, edge); - return; - } - __raw_writel(val | (edge << (bit << 1)), reg); -} - -/* handle 32 interrupts in one status register */ -static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) -{ - u32 gpio_irq_no_base = port->virtual_irq_start; - - while (irq_stat != 0) { - int irqoffset = fls(irq_stat) - 1; - - if (port->both_edges & (1 << irqoffset)) - mxc_flip_edge(port, irqoffset); - - generic_handle_irq(gpio_irq_no_base + irqoffset); - - irq_stat &= ~(1 << irqoffset); - } -} - -/* MX1 and MX3 has one interrupt *per* gpio port */ -static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - u32 irq_stat; - struct mxc_gpio_port *port = irq_get_handler_data(irq); - - irq_stat = __raw_readl(port->base + GPIO_ISR) & - __raw_readl(port->base + GPIO_IMR); - - mxc_gpio_irq_handler(port, irq_stat); -} - -/* MX2 has one interrupt *for all* gpio ports */ -static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - int i; - u32 irq_msk, irq_stat; - struct mxc_gpio_port *port = irq_get_handler_data(irq); - - /* walk through all interrupt status registers */ - for (i = 0; i < gpio_table_size; i++) { - irq_msk = __raw_readl(port[i].base + GPIO_IMR); - if (!irq_msk) - continue; - - irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk; - if (irq_stat) - mxc_gpio_irq_handler(&port[i], irq_stat); - } -} - -/* - * Set interrupt number "irq" in the GPIO as a wake-up source. - * While system is running, all registered GPIO interrupts need to have - * wake-up enabled. When system is suspended, only selected GPIO interrupts - * need to have wake-up enabled. - * @param irq interrupt source number - * @param enable enable as wake-up if equal to non-zero - * @return This function returns 0 on success. - */ -static int gpio_set_wake_irq(struct irq_data *d, u32 enable) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 gpio_idx = gpio & 0x1F; - struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; - - if (enable) { - if (port->irq_high && (gpio_idx >= 16)) - enable_irq_wake(port->irq_high); - else - enable_irq_wake(port->irq); - } else { - if (port->irq_high && (gpio_idx >= 16)) - disable_irq_wake(port->irq_high); - else - disable_irq_wake(port->irq); - } - - return 0; -} - -static struct irq_chip gpio_irq_chip = { - .name = "GPIO", - .irq_ack = gpio_ack_irq, - .irq_mask = gpio_mask_irq, - .irq_unmask = gpio_unmask_irq, - .irq_set_type = gpio_set_irq_type, - .irq_set_wake = gpio_set_wake_irq, -}; - -static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, - int dir) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - u32 l; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - l = __raw_readl(port->base + GPIO_GDIR); - if (dir) - l |= 1 << offset; - else - l &= ~(1 << offset); - __raw_writel(l, port->base + GPIO_GDIR); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - void __iomem *reg = port->base + GPIO_DR; - u32 l; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset); - __raw_writel(l, reg); - spin_unlock_irqrestore(&port->lock, flags); -} - -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - - return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1; -} - -static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - _set_gpio_direction(chip, offset, 0); - return 0; -} - -static int mxc_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - mxc_gpio_set(chip, offset, value); - _set_gpio_direction(chip, offset, 1); - return 0; -} - -/* - * This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) -{ - int i, j; - - /* save for local usage */ - mxc_gpio_ports = port; - gpio_table_size = cnt; - - printk(KERN_INFO "MXC GPIO hardware\n"); - - for (i = 0; i < cnt; i++) { - /* disable the interrupt and clear the status */ - __raw_writel(0, port[i].base + GPIO_IMR); - __raw_writel(~0, port[i].base + GPIO_ISR); - for (j = port[i].virtual_irq_start; - j < port[i].virtual_irq_start + 32; j++) { - irq_set_lockdep_class(j, &gpio_lock_class); - irq_set_chip_and_handler(j, &gpio_irq_chip, - handle_level_irq); - set_irq_flags(j, IRQF_VALID); - } - - /* register gpio chip */ - port[i].chip.direction_input = mxc_gpio_direction_input; - port[i].chip.direction_output = mxc_gpio_direction_output; - port[i].chip.get = mxc_gpio_get; - port[i].chip.set = mxc_gpio_set; - port[i].chip.base = i * 32; - port[i].chip.ngpio = 32; - - spin_lock_init(&port[i].lock); - - /* its a serious configuration bug when it fails */ - BUG_ON( gpiochip_add(&port[i].chip) < 0 ); - - if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) { - /* setup one handler for each entry */ - irq_set_chained_handler(port[i].irq, - mx3_gpio_irq_handler); - irq_set_handler_data(port[i].irq, &port[i]); - if (port[i].irq_high) { - /* setup handler for GPIO 16 to 31 */ - irq_set_chained_handler(port[i].irq_high, - mx3_gpio_irq_handler); - irq_set_handler_data(port[i].irq_high, - &port[i]); - } - } - } - - if (cpu_is_mx2()) { - /* setup one handler for all GPIO interrupts */ - irq_set_chained_handler(port[0].irq, mx2_gpio_irq_handler); - irq_set_handler_data(port[0].irq, port); - } - - return 0; -} diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index 87bd4ef..31c820c 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -36,33 +36,4 @@ #define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio)) #define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START) -struct mxc_gpio_port { - struct list_head node; - void __iomem *base; - int id; - int irq; - int irq_high; - int virtual_irq_start; - struct gpio_chip chip; - u32 both_edges; - spinlock_t lock; -}; - -#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high) \ - { \ - .chip.label = "gpio-" #_id, \ - .irq = _irq, \ - .irq_high = _irq_high, \ - .base = soc ## _IO_ADDRESS( \ - soc ## _GPIO ## _hwid ## _BASE_ADDR), \ - .virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32, \ - } - -#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq) \ - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0) -#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid) \ - DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0) - -int mxc_gpio_init(struct mxc_gpio_port*, int); - #endif diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index df3df3f..065b5c0 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -29,6 +29,18 @@ #include #include +struct mxc_gpio_port { + struct list_head node; + void __iomem *base; + int id; + int irq; + int irq_high; + int virtual_irq_start; + struct gpio_chip chip; + u32 both_edges; + spinlock_t lock; +}; + /* * MX2 has one interrupt *for all* gpio ports. The list is used * to save the references to all ports, so that mx2_gpio_irq_handler