mbox series

[v2,0/5] DTS changes to support cpufreq on QCS404

Message ID 20191125142511.681149-1-niklas.cassel@linaro.org
Headers show
Series DTS changes to support cpufreq on QCS404 | expand

Message

Niklas Cassel Nov. 25, 2019, 2:25 p.m. UTC 
The following DTS changes are required to enable cpufreq support on
the QCS404.

Changes since v1:
-Added a cover-letter.
-Swapped order of "pll" and "aux" clocks, in order to not break DT
backwards compatibility. (In case no clock-names are given, "pll" still
has to be the first clock).
-Removed incorrect newline in the middle of the cpu0 DT node.
(This extra newline must have been added by mistake, since no other
cpuX node in the same cluster had this extra newline added.)

Jorge Ramirez-Ortiz (5):
  arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider
  arm64: dts: qcom: qcs404: Add HFPLL node
  arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider
  arm64: dts: qcom: qcs404: Add DVFS support
  arm64: defconfig: Enable HFPLL

 arch/arm64/boot/dts/qcom/msm8916.dtsi |  3 +-
 arch/arm64/boot/dts/qcom/qcs404.dtsi  | 42 +++++++++++++++++++++++++++
 arch/arm64/configs/defconfig          |  1 +
 3 files changed, 45 insertions(+), 1 deletion(-)

-- 
2.23.0