mbox series

[v4,0/9] Prereqs for HiKey960 USB support

Message ID 20191028215919.83697-1-john.stultz@linaro.org
Headers show
Series Prereqs for HiKey960 USB support | expand

Message

John Stultz Oct. 28, 2019, 9:59 p.m. UTC
Just another round here trying to push forward a patch series
submitted previously by Yu Chen to get HiKey960 dev-board's USB
functionality working.

This series focuses on just the dwc3 changes and bindings
needed.

The current full patchset can be found here:
  https://git.linaro.org/people/john.stultz/android-dev.git/log/?id=ce013895404bd4a5b6487df0ac30ed2dbea43f5d

NOTE: I unfortunately don't have any deep knowledge of the
hardware other then the previously submitted code  and what I
can intuit from testing, but I tried to document the previously
undocumented bindings as best I could, fixed up a few minor
checkpatch issues and tried to address previous feedback as best
I could.

I'd greatly appreciate any feedback or thoughts!

thanks
-john

New in v4:
* Just added a few Reviewed-by: lines from Rob Herring


Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
CC: ShuFan Lee <shufan_lee@richtek.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Yu Chen <chenyu56@huawei.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org

John Stultz (6):
  dt-bindings: usb: rt1711h: Add connector bindings
  dt-bindings: usb: dwc3: Allow clock list & resets to be more flexible
  usb: dwc3: Rework clock initialization to be more flexible
  usb: dwc3: Rework resets initialization to be more flexible
  dt-bindings: usb: generic: Add role-switch-default-host binding
  usb: dwc3: Add host-mode as default support

Yu Chen (3):
  usb: dwc3: Execute GCTL Core Soft Reset while switch modes
  usb: dwc3: Increase timeout for CmdAct cleared by device controller
  usb: dwc3: Registering a role switch in the DRD code.

 .../devicetree/bindings/usb/dwc3.txt          |  5 +-
 .../devicetree/bindings/usb/generic.txt       |  5 ++
 .../bindings/usb/richtek,rt1711h.txt          | 29 +++++++
 drivers/usb/dwc3/Kconfig                      |  1 +
 drivers/usb/dwc3/core.c                       | 38 +++++----
 drivers/usb/dwc3/core.h                       |  6 ++
 drivers/usb/dwc3/drd.c                        | 78 ++++++++++++++++++-
 drivers/usb/dwc3/gadget.c                     |  2 +-
 8 files changed, 144 insertions(+), 20 deletions(-)

-- 
2.17.1