| Message ID | 20190325083501.8088-1-kishon@ti.com |
|---|---|
| Headers | show |
| Series | Add support for PCIe RC and EP mode in TI's AM654 SoC | expand |
Hi, On 25/03/19 2:04 PM, Kishon Vijay Abraham I wrote: > Add PCIe RC support for TI's AM654 SoC. The PCIe controller in AM654 > uses Synopsys core revision 4.90a and uses the same TI wrapper as used > in keystone2 with certain modification. Hence AM654 will use the same > pci wrapper driver pci-keystone.c > > This series was initially part of [1]. This series only includes patches > that has to be merged via Lorenzo's tree. The PHY patches and dt patches > will be sent separately. > > This series is created over keystone MSI cleanup series [2]. > > This series: > *) Cleanup pci-keystone driver so that both RC mode and EP mode of > AM654 can be supported > *) Modify epc-core to support allocation of aligned buffers required for > AM654 > *) Fix ATU unroll identification > *) Add support for both host mode and device mode in AM654 > > Changes from v1: > *) Support for legacy interrupt in AM654 is removed (see backgrond here [3]) > *) Allow of_pci_get_max_link_speed to be used by Endpoint controller > driver > *) Add support to set max-link-speed from DT in pci-keystone driver > *) Update "Reviewed-by: Rob Herring <robh@kernel.org>" tags. Looks like I've missed updating the tags in the version that was sent out. I'll resend the series. Sorry for the noise. Thanks Kishon > > [1] -> https://lore.kernel.org/patchwork/cover/989487/ > [2] -> https://lkml.org/lkml/2019/3/21/193 > [3] -> https://lkml.org/lkml/2019/3/19/235 > > Kishon Vijay Abraham I (26): > PCI: keystone: Add start_link/stop_link dw_pcie_ops > PCI: keystone: Cleanup error_irq configuration > dt-bindings: PCI: keystone: Add "reg-names" binding information > PCI: keystone: Perform host initialization in a single function > PCI: keystone: Use platform_get_resource_byname to get memory > resources > PCI: keystone: Move initializations to appropriate places > dt-bindings: PCI: Add dt-binding to configure PCIe mode > PCI: keystone: Explicitly set the PCIe mode > dt-bindings: PCI: Document "atu" reg-names > PCI: dwc: Enable iATU unroll for endpoint too > PCI: dwc: Fix ATU identification for designware version >= 4.80 > PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64 > dt-bindings: PCI: Add PCI RC dt binding documentation for AM654 > PCI: keystone: Add support for PCIe RC in AM654x Platforms > PCI: keystone: Invoke phy_reset API before enabling PHY > PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint > drivers > PCI: keystone: Add support to set the max link speed from DT > PCI: endpoint: Add support to allocate aligned buffers to be mapped in > BARs > PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops > PCI: dwc: Fix dw_pcie_ep_find_capability to return correct capability > offset > PCI: dwc: Add callbacks for accessing dbi2 address space > PCI: keystone: Add support for PCIe EP in AM654x Platforms > PCI: designware-ep: Configure RESBAR to advertise the smallest size > PCI: designware-ep: Use aligned ATU window for raising MSI interrupts > misc: pci_endpoint_test: Add support to test PCI EP in AM654x > misc: pci_endpoint_test: Fix test_reg_bar to be updated in > pci_endpoint_test > > .../bindings/pci/designware-pcie.txt | 7 +- > .../devicetree/bindings/pci/pci-keystone.txt | 14 +- > drivers/misc/pci_endpoint_test.c | 18 + > drivers/pci/Makefile | 2 +- > drivers/pci/controller/dwc/Kconfig | 25 +- > drivers/pci/controller/dwc/pci-dra7xx.c | 2 +- > drivers/pci/controller/dwc/pci-keystone.c | 577 +++++++++++++++--- > drivers/pci/controller/dwc/pcie-artpec6.c | 2 +- > .../pci/controller/dwc/pcie-designware-ep.c | 55 +- > .../pci/controller/dwc/pcie-designware-host.c | 19 - > .../pci/controller/dwc/pcie-designware-plat.c | 2 +- > drivers/pci/controller/dwc/pcie-designware.c | 52 ++ > drivers/pci/controller/dwc/pcie-designware.h | 15 +- > drivers/pci/endpoint/functions/pci-epf-test.c | 5 +- > drivers/pci/endpoint/pci-epf-core.c | 10 +- > drivers/pci/of.c | 44 +- > include/linux/pci-epc.h | 2 + > include/linux/pci-epf.h | 3 +- > 18 files changed, 682 insertions(+), 172 deletions(-) >
Add PCIe RC support for TI's AM654 SoC. The PCIe controller in AM654 uses Synopsys core revision 4.90a and uses the same TI wrapper as used in keystone2 with certain modification. Hence AM654 will use the same pci wrapper driver pci-keystone.c This series was initially part of [1]. This series only includes patches that has to be merged via Lorenzo's tree. The PHY patches and dt patches will be sent separately. This series is created over keystone MSI cleanup series [2]. This series: *) Cleanup pci-keystone driver so that both RC mode and EP mode of AM654 can be supported *) Modify epc-core to support allocation of aligned buffers required for AM654 *) Fix ATU unroll identification *) Add support for both host mode and device mode in AM654 Changes from v1: *) Support for legacy interrupt in AM654 is removed (see backgrond here [3]) *) Allow of_pci_get_max_link_speed to be used by Endpoint controller driver *) Add support to set max-link-speed from DT in pci-keystone driver *) Update "Reviewed-by: Rob Herring <robh@kernel.org>" tags. [1] -> https://lore.kernel.org/patchwork/cover/989487/ [2] -> https://lkml.org/lkml/2019/3/21/193 [3] -> https://lkml.org/lkml/2019/3/19/235 Kishon Vijay Abraham I (26): PCI: keystone: Add start_link/stop_link dw_pcie_ops PCI: keystone: Cleanup error_irq configuration dt-bindings: PCI: keystone: Add "reg-names" binding information PCI: keystone: Perform host initialization in a single function PCI: keystone: Use platform_get_resource_byname to get memory resources PCI: keystone: Move initializations to appropriate places dt-bindings: PCI: Add dt-binding to configure PCIe mode PCI: keystone: Explicitly set the PCIe mode dt-bindings: PCI: Document "atu" reg-names PCI: dwc: Enable iATU unroll for endpoint too PCI: dwc: Fix ATU identification for designware version >= 4.80 PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64 dt-bindings: PCI: Add PCI RC dt binding documentation for AM654 PCI: keystone: Add support for PCIe RC in AM654x Platforms PCI: keystone: Invoke phy_reset API before enabling PHY PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers PCI: keystone: Add support to set the max link speed from DT PCI: endpoint: Add support to allocate aligned buffers to be mapped in BARs PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops PCI: dwc: Fix dw_pcie_ep_find_capability to return correct capability offset PCI: dwc: Add callbacks for accessing dbi2 address space PCI: keystone: Add support for PCIe EP in AM654x Platforms PCI: designware-ep: Configure RESBAR to advertise the smallest size PCI: designware-ep: Use aligned ATU window for raising MSI interrupts misc: pci_endpoint_test: Add support to test PCI EP in AM654x misc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test .../bindings/pci/designware-pcie.txt | 7 +- .../devicetree/bindings/pci/pci-keystone.txt | 14 +- drivers/misc/pci_endpoint_test.c | 18 + drivers/pci/Makefile | 2 +- drivers/pci/controller/dwc/Kconfig | 25 +- drivers/pci/controller/dwc/pci-dra7xx.c | 2 +- drivers/pci/controller/dwc/pci-keystone.c | 577 +++++++++++++++--- drivers/pci/controller/dwc/pcie-artpec6.c | 2 +- .../pci/controller/dwc/pcie-designware-ep.c | 55 +- .../pci/controller/dwc/pcie-designware-host.c | 19 - .../pci/controller/dwc/pcie-designware-plat.c | 2 +- drivers/pci/controller/dwc/pcie-designware.c | 52 ++ drivers/pci/controller/dwc/pcie-designware.h | 15 +- drivers/pci/endpoint/functions/pci-epf-test.c | 5 +- drivers/pci/endpoint/pci-epf-core.c | 10 +- drivers/pci/of.c | 44 +- include/linux/pci-epc.h | 2 + include/linux/pci-epf.h | 3 +- 18 files changed, 682 insertions(+), 172 deletions(-) -- 2.17.1