mbox series

[RFC,0/2] Initial BT serdev support

Message ID 20170118180500.7791-1-robh@kernel.org
Headers show
Series Initial BT serdev support | expand

Message

Rob Herring Jan. 18, 2017, 6:04 p.m. UTC 
This is initial attempt for BT LL protocol using the new serdev bus[1]. 
I initially had been hacking up the TI-ST driver which newer TI chips 
use, but only recently figured out the LL protocol is the same (thanks 
to John Stultz). As the TI-ST driver is a bit of a mess, I've instead 
modified the LL protocol to use serdev and added firmware loading.

I've tested this on a HiKey board which has TI WL1835 combo chip.

Rob

[1] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1311650.html

Rob Herring (2):
  bluetooth: hci_uart: add serdev driver support library
  bluetooth: hci_uart: add LL protocol serdev driver support

 drivers/bluetooth/Makefile     |   2 +-
 drivers/bluetooth/hci_ll.c     | 248 ++++++++++++++++++++++++++-
 drivers/bluetooth/hci_serdev.c | 370 +++++++++++++++++++++++++++++++++++++++++
 drivers/bluetooth/hci_uart.h   |   4 +
 4 files changed, 622 insertions(+), 2 deletions(-)
 create mode 100644 drivers/bluetooth/hci_serdev.c

-- 
2.10.1