mbox series

[v2,0/2] usb: dwc3: Add dual-role support using OTG core

Message ID 1519730952-2102-1-git-send-email-rogerq@ti.com
Headers show
Series usb: dwc3: Add dual-role support using OTG core | expand

Message

Roger Quadros Feb. 27, 2018, 11:29 a.m. UTC 
Hi Felipe,

Some platforms (e.g. TI's AM437x) don't have USB ID pin state available
over GPIO/extcon but need to rely on the DWC3 core's OTG block to
get the ID pin state instead.

This series implements simple dual-role functionality using DWC3's OTG block.
Debugfs 'mode' override is also functional so user can switch
between "otg", "host" or "device" modes for debug.

Although system suspend/resume isn't working yet in mainline for AM437x,
I've tested this series for system suspend/resume using a local tree.

Roger Quadros (2):
  usb: dwc3: core.h: add some register definitions
  usb: dwc3: add dual role support using OTG block

 drivers/usb/dwc3/core.c |  67 ++++++-
 drivers/usb/dwc3/core.h | 111 +++++++++++
 drivers/usb/dwc3/drd.c  | 489 ++++++++++++++++++++++++++++++++++++++++++++++--
 3 files changed, 639 insertions(+), 28 deletions(-)

-- 
cheers,
-roger

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki