| Message ID | 1487164699-30708-1-git-send-email-kishon@ti.com |
|---|---|
| Headers | show |
| Series | PCI: dwc: Rework and cleanup designware driver | expand |
On Wed, Feb 15, 2017 at 06:48:09PM +0530, Kishon Vijay Abraham I wrote: > This series reworks designware driver in preparation for adding endpoint > mode support to designware driver. > > This series was previously sent as part of endpoint support series > https://lkml.org/lkml/2017/1/13/562 > > Validate pci host only in pci-dra7xx. Any help in validating other > platforms would be highly appreciated. > > This series is created after cherrypicking the following patch and > then applying pci/host-designware. > > commit a782b5f986c3fa1cfa7f2b57941200c6a5809242 > Author: Murali Karicheri <m-karicheri2@ti.com> > Date: Wed Jan 4 14:32:30 2017 -0500 > > PCI: designware: Check for iATU unroll only on platforms that use ATU > > The patches has been pushed to > git://git.ti.com/linux-phy/linux-phy.git dwc-rework > > Kishon Vijay Abraham I (10): > PCI: dwc: designware: Move the register defines to designware header > file > PCI: dwc: *all*: Add platform_set_drvdata > PCI: dwc: *all*: Rename cfg_read/cfg_write to read/write > PCI: dwc: designware: Get device pointer at the start of > dw_pcie_host_init > PCI: dwc: *all*: Split *struct pcie_port* into host only and core > structures > PCI: dwc: designware: Parse *num-lanes* property in dw_pcie_setup_rc > PCI: dwc: designware: Fix style errors in pcie-designware.c > PCI: dwc: Split pcie-designware.c into host and core files > PCI: dwc: Create a new config symbol to enable pci dwc host > PCI: dwc: Remove dependency of designware to CONFIG_PCI > > drivers/Makefile | 3 + > drivers/pci/Makefile | 3 - > drivers/pci/dwc/Kconfig | 39 +- > drivers/pci/dwc/Makefile | 1 + > drivers/pci/dwc/pci-dra7xx.c | 91 ++-- > drivers/pci/dwc/pci-exynos.c | 81 ++-- > drivers/pci/dwc/pci-imx6.c | 131 ++--- > drivers/pci/dwc/pci-keystone-dw.c | 87 ++-- > drivers/pci/dwc/pci-keystone.c | 56 ++- > drivers/pci/dwc/pci-keystone.h | 4 +- > drivers/pci/dwc/pci-layerscape.c | 93 ++-- > drivers/pci/dwc/pcie-armada8k.c | 87 ++-- > drivers/pci/dwc/pcie-artpec6.c | 50 +- > drivers/pci/dwc/pcie-designware-host.c | 635 ++++++++++++++++++++++++ > drivers/pci/dwc/pcie-designware-plat.c | 29 +- > drivers/pci/dwc/pcie-designware.c | 823 +++----------------------------- > drivers/pci/dwc/pcie-designware.h | 170 +++++-- > drivers/pci/dwc/pcie-hisi.c | 57 ++- > drivers/pci/dwc/pcie-qcom.c | 72 ++- > drivers/pci/dwc/pcie-spear13xx.c | 85 ++-- > 20 files changed, 1434 insertions(+), 1163 deletions(-) > create mode 100644 drivers/pci/dwc/pcie-designware-host.c I applied these to pci/host-designware with the intent of merging them for v4.11. They're not in -next yet; I'll merge them into -next after the autobuilder completes. Bjorn
This series reworks designware driver in preparation for adding endpoint mode support to designware driver. This series was previously sent as part of endpoint support series https://lkml.org/lkml/2017/1/13/562 Validate pci host only in pci-dra7xx. Any help in validating other platforms would be highly appreciated. This series is created after cherrypicking the following patch and then applying pci/host-designware. commit a782b5f986c3fa1cfa7f2b57941200c6a5809242 Author: Murali Karicheri <m-karicheri2@ti.com> Date: Wed Jan 4 14:32:30 2017 -0500 PCI: designware: Check for iATU unroll only on platforms that use ATU The patches has been pushed to git://git.ti.com/linux-phy/linux-phy.git dwc-rework Kishon Vijay Abraham I (10): PCI: dwc: designware: Move the register defines to designware header file PCI: dwc: *all*: Add platform_set_drvdata PCI: dwc: *all*: Rename cfg_read/cfg_write to read/write PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init PCI: dwc: *all*: Split *struct pcie_port* into host only and core structures PCI: dwc: designware: Parse *num-lanes* property in dw_pcie_setup_rc PCI: dwc: designware: Fix style errors in pcie-designware.c PCI: dwc: Split pcie-designware.c into host and core files PCI: dwc: Create a new config symbol to enable pci dwc host PCI: dwc: Remove dependency of designware to CONFIG_PCI drivers/Makefile | 3 + drivers/pci/Makefile | 3 - drivers/pci/dwc/Kconfig | 39 +- drivers/pci/dwc/Makefile | 1 + drivers/pci/dwc/pci-dra7xx.c | 91 ++-- drivers/pci/dwc/pci-exynos.c | 81 ++-- drivers/pci/dwc/pci-imx6.c | 131 ++--- drivers/pci/dwc/pci-keystone-dw.c | 87 ++-- drivers/pci/dwc/pci-keystone.c | 56 ++- drivers/pci/dwc/pci-keystone.h | 4 +- drivers/pci/dwc/pci-layerscape.c | 93 ++-- drivers/pci/dwc/pcie-armada8k.c | 87 ++-- drivers/pci/dwc/pcie-artpec6.c | 50 +- drivers/pci/dwc/pcie-designware-host.c | 635 ++++++++++++++++++++++++ drivers/pci/dwc/pcie-designware-plat.c | 29 +- drivers/pci/dwc/pcie-designware.c | 823 +++----------------------------- drivers/pci/dwc/pcie-designware.h | 170 +++++-- drivers/pci/dwc/pcie-hisi.c | 57 ++- drivers/pci/dwc/pcie-qcom.c | 72 ++- drivers/pci/dwc/pcie-spear13xx.c | 85 ++-- 20 files changed, 1434 insertions(+), 1163 deletions(-) create mode 100644 drivers/pci/dwc/pcie-designware-host.c -- 1.7.9.5