| Message ID | E1sBsyH-00E8w6-Vu@rmk-PC.armlinux.org.uk |
|---|---|
| State | New |
| Headers | show |
| Series | wifi: TI wilink8 updates | expand |
diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h index 7fed96d71b27..de6c671c4be6 100644 --- a/drivers/net/wireless/ti/wl18xx/wl18xx.h +++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h @@ -13,7 +13,7 @@ /* minimum FW required for driver */ #define WL18XX_CHIP_VER 8 #define WL18XX_IFTYPE_VER 9 -#define WL18XX_MAJOR_VER WLCORE_FW_VER_IGNORE +#define WL18XX_MAJOR_VER 0 #define WL18XX_SUBTYPE_VER WLCORE_FW_VER_IGNORE #define WL18XX_MINOR_VER 58
wlcore firmware versions are structured thusly: chip.if-type.major.sub-type.minor e.g. 8 9 0 0 58 With WL18xx ignoring the major firmware version, looking for a firmware version that conforms to: chip >= 8 if-type >= 9 major (don't care) sub-type (don't care) minor >= 58 Each test is satisfied if the value read from the firmware is greater than the minimum, but if it is equal (or we don't care about the field), then the next field is checked. Thus it doesn't recognise 8.9.1.x.0 as being newer than 8.9.0.x.58 since the major and sub-type numbers are "don't care" and the minor needs to be greater or equal to 58. We need to change the major version from "ignore" to "0" for this later firmware to be correctly detected, and allow the dual-firmware version support to work. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- drivers/net/wireless/ti/wl18xx/wl18xx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)