From patchwork Mon Sep 30 06:36:46 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: David Lin X-Patchwork-Id: 831865 Received: from EUR05-VI1-obe.outbound.protection.outlook.com (mail-vi1eur05on2074.outbound.protection.outlook.com [40.107.21.74]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 41C6C16A395; Mon, 30 Sep 2024 06:38:01 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=fail smtp.client-ip=40.107.21.74 ARC-Seal: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1727678284; cv=fail; b=CpacTZLKpyrRlaUb9Z3ZZxpZCd3U5gSJE4Bwv/mwxd/d+gA4fba5rJmvCTc5QpLGOhNIUYmPvrmGYMrR1EkeJ+yrrg1AZc7/OG1XDz43oEZAiMJ9Yrifh9eg8gJi35/L+AS0Ueho10VWiuVjfqWB5ltXWwXUIKDfBPQsdc0W82s= ARC-Message-Signature: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1727678284; c=relaxed/simple; bh=mRXdyv2IuG4cDFZWG41EDkE7dIhJfYrIj+Ku8U1MoC8=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: Content-Type:MIME-Version; b=foBZyzhQebtgOIh4R/xyOYfz0IPRwJfeN9X6pl1IsX7vq/F9lSBIA93KYF66gt6dRC3phNjSEEc+GHzjMwD4LTdRydBkTBHq4Dxk3Pj+aoy0NlcFpDThrPkbqYtjg/N39pzdO/2xmvRwfBA8/B6yXVEEorCLWxZzwFtqLQpNnqU= ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=nxp.com; spf=pass smtp.mailfrom=nxp.com; dkim=pass (2048-bit key) header.d=nxp.com header.i=@nxp.com header.b=YSsMNIz2; arc=fail smtp.client-ip=40.107.21.74 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=nxp.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=nxp.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=nxp.com header.i=@nxp.com header.b="YSsMNIz2" ARC-Seal: i=1; a=rsa-sha256; s=arcselector10001; d=microsoft.com; cv=none; b=AKjDf9cJ4yoFBp9xTwH9OF2xJU9ly0pdjFXDtZ7u4/Qj6kTJeCK075RAjp7mre7hCOwqJaKl8t7VroZa7AJ6RC2149zshwQHo96ub6vyRPH4+qzlUvIrvpVjVJqwtbt0CV8+TH7UOfpKZCaiHEOn++lBo7HsHk1KxOZHhKxn9ULVo2u+eLoagfy/0x+R89RfK5JpvFN3oIgWasOW37PRbeCR6DHZmwtL6z6btwYrRW7hQFdCicHGEu9TPuHyuuZ2yAmcFhtvz+LjREjuphYaOH5Vr+UPsNvDFLCGMzUj6qJXFgppmNFJvfvok4/FinXF/VHXUMBFi26xOfeGlZm1Mg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector10001; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=nQYIZmNDwm0/heMWKnoupo+5tfIpCdhAw0AwPGin+BI=; b=ZAdJ4yUHUTaEFbE5SsQ0qE5iNvDYZBW/04qOY2+Tfb89W6PMyIwUT/KryGRVtiDrBBG267BZyX2PtPSPU2WEYpzLX7mblmDAax0H9ikqXB1cCAJlyvAtCKUXgG2w14OdtNHzAVEsRivMCg7Hq03CULFbyFUVCrzQnYsarg1otyjcafN37ROYiyEtkz0xTDs8Q/O7xzG/Ode/JU5jV8smafnvb+yLrKiGUqd7D8knyiF4L8pUuDNNfTvTe54TtzBXkIUTQbsGPQGlqNdYxlntDLC8q6ISDmZCMnyrd0CVRu2/jwxB8LZQ5SFbUSRFVsjX7wpLFWYb7DMtEhOrnr2mpg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=nxp.com; dmarc=pass action=none header.from=nxp.com; dkim=pass header.d=nxp.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=nxp.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=nQYIZmNDwm0/heMWKnoupo+5tfIpCdhAw0AwPGin+BI=; b=YSsMNIz2dwWx1iRhmZKaxM5hYb+gb/GBKxKYMsp5YiwyQTSYzMISXmoXMKBeEXuTMJm20pfohOlNYIiWh8z9VoFUjeFAqrbodISBc6Np6UcgMhSQ1D9RyZX4dR4i/HuATj1yuItORe2bWQOLIcIF5I4Wi/XqhUOZflRaj7ashAlmrwDxKH2hQoWZwtpKDUSlKbkyuPKYEFRnQIbwAiIgQfe/BAeSXNMfbNEDQ4cVE5at6ppblnZb/X7NAgiAaua6PdafbUTtXaYRj+363Gjdi/yAFL4WktWBlZcfrgvW50U7GbioMhH6Kq8I/MjznbFAhWgtvB1320vlpvG5+vwybw== Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=nxp.com; Received: from PA4PR04MB9638.eurprd04.prod.outlook.com (2603:10a6:102:273::20) by PAXPR04MB9154.eurprd04.prod.outlook.com (2603:10a6:102:22d::9) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7939.23; Mon, 30 Sep 2024 06:37:50 +0000 Received: from PA4PR04MB9638.eurprd04.prod.outlook.com ([fe80::f950:3bb6:6848:2257]) by PA4PR04MB9638.eurprd04.prod.outlook.com ([fe80::f950:3bb6:6848:2257%3]) with mapi id 15.20.8005.024; Mon, 30 Sep 2024 06:37:50 +0000 From: David Lin To: linux-wireless@vger.kernel.org Cc: linux-kernel@vger.kernel.org, briannorris@chromium.org, kvalo@kernel.org, francesco@dolcini.it, tsung-hsien.hsieh@nxp.com, s.hauer@pengutronix.de, David Lin Subject: [PATCH v3 07/22] wifi: nxpwifi: add join.c Date: Mon, 30 Sep 2024 14:36:46 +0800 Message-Id: <20240930063701.2566520-8-yu-hao.lin@nxp.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240930063701.2566520-1-yu-hao.lin@nxp.com> References: <20240930063701.2566520-1-yu-hao.lin@nxp.com> X-ClientProxiedBy: AM8P190CA0001.EURP190.PROD.OUTLOOK.COM (2603:10a6:20b:219::6) To PA4PR04MB9638.eurprd04.prod.outlook.com (2603:10a6:102:273::20) Precedence: bulk X-Mailing-List: linux-wireless@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: PA4PR04MB9638:EE_|PAXPR04MB9154:EE_ X-MS-Office365-Filtering-Correlation-Id: 8bebc7ab-a214-4dbe-176d-08dce11a6731 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; ARA:13230040|1800799024|52116014|376014|366016|38350700014; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:PA4PR04MB9638.eurprd04.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230040)(1800799024)(52116014)(376014)(366016)(38350700014); DIR:OUT; SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: nxp.com X-MS-Exchange-CrossTenant-Network-Message-Id: 8bebc7ab-a214-4dbe-176d-08dce11a6731 X-MS-Exchange-CrossTenant-AuthSource: PA4PR04MB9638.eurprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 30 Sep 2024 06:37:49.9325 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: CD2CDNTD0Gg/RnLx0ifl6nxngFMVB8CLRU8ubSbFVnRT97U+GeZyaS15nNfPR8CQodFa5QSzqYzWGgEqRQMqiw== X-MS-Exchange-Transport-CrossTenantHeadersStamped: PAXPR04MB9154 File join.c is used to support join porcess. Mostly related association. Signed-off-by: David Lin --- drivers/net/wireless/nxp/nxpwifi/join.c | 910 ++++++++++++++++++++++++ 1 file changed, 910 insertions(+) create mode 100644 drivers/net/wireless/nxp/nxpwifi/join.c diff --git a/drivers/net/wireless/nxp/nxpwifi/join.c b/drivers/net/wireless/nxp/nxpwifi/join.c new file mode 100644 index 000000000000..edc858a12bc7 --- /dev/null +++ b/drivers/net/wireless/nxp/nxpwifi/join.c @@ -0,0 +1,910 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * NXP Wireless LAN device driver: association and ad-hoc start/join + * + * Copyright 2011-2024 NXP + */ + +#include "cfg.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "cmdevt.h" +#include "wmm.h" +#include "11n.h" +#include "11ac.h" +#include "11ax.h" + +#define CAPINFO_MASK (~(BIT(15) | BIT(14) | BIT(12) | BIT(11) | BIT(9))) + +/* Append a generic IE as a pass through TLV to a TLV buffer. + * + * This function is called from the network join command preparation routine. + * + * If the IE buffer has been setup by the application, this routine appends + * the buffer as a pass through TLV type to the request. + */ +static int +nxpwifi_cmd_append_generic_ie(struct nxpwifi_private *priv, u8 **buffer) +{ + int ret_len = 0; + struct nxpwifi_ie_types_header ie_header; + + /* Null Checks */ + if (!buffer) + return 0; + if (!(*buffer)) + return 0; + + /* If there is a generic ie buffer setup, append it to the return + * parameter buffer pointer. + */ + if (priv->gen_ie_buf_len) { + nxpwifi_dbg(priv->adapter, INFO, + "info: %s: append generic ie len %d to %p\n", + __func__, priv->gen_ie_buf_len, *buffer); + + /* Wrap the generic IE buffer with a pass through TLV type */ + ie_header.type = cpu_to_le16(TLV_TYPE_PASSTHROUGH); + ie_header.len = cpu_to_le16(priv->gen_ie_buf_len); + memcpy(*buffer, &ie_header, sizeof(ie_header)); + + /* Increment the return size and the return buffer pointer + * param + */ + *buffer += sizeof(ie_header); + ret_len += sizeof(ie_header); + + /* Copy the generic IE buffer to the output buffer, advance + * pointer + */ + memcpy(*buffer, priv->gen_ie_buf, priv->gen_ie_buf_len); + + /* Increment the return size and the return buffer pointer + * param + */ + *buffer += priv->gen_ie_buf_len; + ret_len += priv->gen_ie_buf_len; + + /* Reset the generic IE buffer */ + priv->gen_ie_buf_len = 0; + } + + /* return the length appended to the buffer */ + return ret_len; +} + +/* Append TSF tracking info from the scan table for the target AP. + * + * This function is called from the network join command preparation routine. + * + * The TSF table TSF sent to the firmware contains two TSF values: + * - The TSF of the target AP from its previous beacon/probe response + * - The TSF timestamp of our local MAC at the time we observed the + * beacon/probe response. + * + * The firmware uses the timestamp values to set an initial TSF value + * in the MAC for the new association after a reassociation attempt. + */ +static int +nxpwifi_cmd_append_tsf_tlv(struct nxpwifi_private *priv, u8 **buffer, + struct nxpwifi_bssdescriptor *bss_desc) +{ + struct nxpwifi_ie_types_tsf_timestamp tsf_tlv; + __le64 tsf_val; + + /* Null Checks */ + if (!buffer) + return 0; + if (!*buffer) + return 0; + + memset(&tsf_tlv, 0x00, sizeof(struct nxpwifi_ie_types_tsf_timestamp)); + + tsf_tlv.header.type = cpu_to_le16(TLV_TYPE_TSFTIMESTAMP); + tsf_tlv.header.len = cpu_to_le16(2 * sizeof(tsf_val)); + + memcpy(*buffer, &tsf_tlv, sizeof(tsf_tlv.header)); + *buffer += sizeof(tsf_tlv.header); + + /* TSF at the time when beacon/probe_response was received */ + tsf_val = cpu_to_le64(bss_desc->fw_tsf); + memcpy(*buffer, &tsf_val, sizeof(tsf_val)); + *buffer += sizeof(tsf_val); + + tsf_val = cpu_to_le64(bss_desc->timestamp); + + nxpwifi_dbg(priv->adapter, INFO, + "info: %s: TSF offset calc: %016llx - %016llx\n", + __func__, bss_desc->timestamp, bss_desc->fw_tsf); + + memcpy(*buffer, &tsf_val, sizeof(tsf_val)); + *buffer += sizeof(tsf_val); + + return sizeof(tsf_tlv.header) + (2 * sizeof(tsf_val)); +} + +/* This function finds out the common rates between rate1 and rate2. + * + * It will fill common rates in rate1 as output if found. + * + * NOTE: Setting the MSB of the basic rates needs to be taken + * care of, either before or after calling this function. + */ +static int nxpwifi_get_common_rates(struct nxpwifi_private *priv, u8 *rate1, + u32 rate1_size, u8 *rate2, u32 rate2_size) +{ + int ret; + u8 *ptr = rate1, *tmp; + u32 i, j; + + tmp = kmemdup(rate1, rate1_size, GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + memset(rate1, 0, rate1_size); + + for (i = 0; i < rate2_size && rate2[i]; i++) { + for (j = 0; j < rate1_size && tmp[j]; j++) { + /* Check common rate, excluding the bit for + * basic rate + */ + if ((rate2[i] & 0x7F) == (tmp[j] & 0x7F)) { + *rate1++ = tmp[j]; + break; + } + } + } + + nxpwifi_dbg(priv->adapter, INFO, "info: Tx data rate set to %#x\n", + priv->data_rate); + + if (!priv->is_data_rate_auto) { + while (*ptr) { + if ((*ptr & 0x7f) == priv->data_rate) { + ret = 0; + goto done; + } + ptr++; + } + nxpwifi_dbg(priv->adapter, ERROR, + "previously set fixed data rate %#x\t" + "is not compatible with the network\n", + priv->data_rate); + + ret = -EPERM; + goto done; + } + + ret = 0; +done: + kfree(tmp); + return ret; +} + +/* This function creates the intersection of the rates supported by a + * target BSS and our adapter settings for use in an assoc/join command. + */ +static int +nxpwifi_setup_rates_from_bssdesc(struct nxpwifi_private *priv, + struct nxpwifi_bssdescriptor *bss_desc, + u8 *out_rates, u32 *out_rates_size) +{ + u8 card_rates[NXPWIFI_SUPPORTED_RATES]; + u32 card_rates_size; + int ret; + + /* Copy AP supported rates */ + memcpy(out_rates, bss_desc->supported_rates, NXPWIFI_SUPPORTED_RATES); + /* Get the STA supported rates */ + card_rates_size = nxpwifi_get_active_data_rates(priv, card_rates); + /* Get the common rates between AP and STA supported rates */ + ret = nxpwifi_get_common_rates(priv, out_rates, NXPWIFI_SUPPORTED_RATES, + card_rates, card_rates_size); + if (ret) { + *out_rates_size = 0; + nxpwifi_dbg(priv->adapter, ERROR, + "%s: cannot get common rates\n", + __func__); + } else { + *out_rates_size = + min_t(size_t, strlen(out_rates), NXPWIFI_SUPPORTED_RATES); + } + + return ret; +} + +/* This function appends a WPS IE. It is called from the network join command + * preparation routine. + * + * If the IE buffer has been setup by the application, this routine appends + * the buffer as a WPS TLV type to the request. + */ +static int +nxpwifi_cmd_append_wps_ie(struct nxpwifi_private *priv, u8 **buffer) +{ + int ret_len = 0; + struct nxpwifi_ie_types_header ie_header; + + if (!buffer || !*buffer) + return 0; + + /* If there is a wps ie buffer setup, append it to the return + * parameter buffer pointer. + */ + if (priv->wps_ie_len) { + nxpwifi_dbg(priv->adapter, CMD, + "cmd: append wps ie %d to %p\n", + priv->wps_ie_len, *buffer); + + /* Wrap the generic IE buffer with a pass through TLV type */ + ie_header.type = cpu_to_le16(TLV_TYPE_PASSTHROUGH); + ie_header.len = cpu_to_le16(priv->wps_ie_len); + memcpy(*buffer, &ie_header, sizeof(ie_header)); + *buffer += sizeof(ie_header); + ret_len += sizeof(ie_header); + + memcpy(*buffer, priv->wps_ie, priv->wps_ie_len); + *buffer += priv->wps_ie_len; + ret_len += priv->wps_ie_len; + } + + kfree(priv->wps_ie); + priv->wps_ie_len = 0; + return ret_len; +} + +/* This function appends rsn ie tlv for wpa/wpa2 security modes. + * It is called from the network join command preparation routine. + */ +static int nxpwifi_append_rsn_ie_wpa_wpa2(struct nxpwifi_private *priv, + u8 **buffer) +{ + struct nxpwifi_ie_types_rsn_param_set *rsn_ie_tlv; + int rsn_ie_len; + + if (!buffer || !(*buffer)) + return 0; + + rsn_ie_tlv = (struct nxpwifi_ie_types_rsn_param_set *)(*buffer); + rsn_ie_tlv->header.type = cpu_to_le16((u16)priv->wpa_ie[0]); + rsn_ie_tlv->header.type = + cpu_to_le16(le16_to_cpu(rsn_ie_tlv->header.type) & 0x00FF); + rsn_ie_tlv->header.len = cpu_to_le16((u16)priv->wpa_ie[1]); + rsn_ie_tlv->header.len = cpu_to_le16(le16_to_cpu(rsn_ie_tlv->header.len) + & 0x00FF); + if (le16_to_cpu(rsn_ie_tlv->header.len) <= (sizeof(priv->wpa_ie) - 2)) + memcpy(rsn_ie_tlv->rsn_ie, &priv->wpa_ie[2], + le16_to_cpu(rsn_ie_tlv->header.len)); + else + return -ENOMEM; + + rsn_ie_len = sizeof(rsn_ie_tlv->header) + + le16_to_cpu(rsn_ie_tlv->header.len); + *buffer += rsn_ie_len; + + return rsn_ie_len; +} + +/* This function prepares command for association. + * + * This sets the following parameters - + * - Peer MAC address + * - Listen interval + * - Beacon interval + * - Capability information + * + * ...and the following TLVs, as required - + * - SSID TLV + * - PHY TLV + * - SS TLV + * - Rates TLV + * - Authentication TLV + * - Channel TLV + * - WPA/WPA2 IE + * - 11n TLV + * - Vendor specific TLV + * - WMM TLV + * - Generic IE + * - TSF TLV + * + * Preparation also includes - + * - Setting command ID and proper size + * - Ensuring correct endian-ness + */ +int nxpwifi_cmd_802_11_associate(struct nxpwifi_private *priv, + struct host_cmd_ds_command *cmd, + struct nxpwifi_bssdescriptor *bss_desc) +{ + struct nxpwifi_adapter *adapter = priv->adapter; + struct host_cmd_ds_802_11_associate *assoc = &cmd->params.associate; + struct nxpwifi_ie_types_host_mlme *host_mlme_tlv; + struct nxpwifi_ie_types_ssid_param_set *ssid_tlv; + struct nxpwifi_ie_types_phy_param_set *phy_tlv; + struct nxpwifi_ie_types_ss_param_set *ss_tlv; + struct nxpwifi_ie_types_rates_param_set *rates_tlv; + struct nxpwifi_ie_types_auth_type *auth_tlv; + struct nxpwifi_ie_types_sae_pwe_mode *sae_pwe_tlv; + struct nxpwifi_ie_types_chan_list_param_set *chan_tlv; + u8 rates[NXPWIFI_SUPPORTED_RATES]; + u32 rates_size; + u16 tmp_cap; + u8 *pos; + int rsn_ie_len = 0; + int ret; + + pos = (u8 *)assoc; + + cmd->command = cpu_to_le16(HOST_CMD_802_11_ASSOCIATE); + + /* Save so we know which BSS Desc to use in the response handler */ + priv->attempted_bss_desc = bss_desc; + + memcpy(assoc->peer_sta_addr, + bss_desc->mac_address, sizeof(assoc->peer_sta_addr)); + pos += sizeof(assoc->peer_sta_addr); + + /* Set the listen interval */ + assoc->listen_interval = cpu_to_le16(priv->listen_interval); + /* Set the beacon period */ + assoc->beacon_period = cpu_to_le16(bss_desc->beacon_period); + + pos += sizeof(assoc->cap_info_bitmap); + pos += sizeof(assoc->listen_interval); + pos += sizeof(assoc->beacon_period); + pos += sizeof(assoc->dtim_period); + + host_mlme_tlv = (struct nxpwifi_ie_types_host_mlme *)pos; + host_mlme_tlv->header.type = cpu_to_le16(TLV_TYPE_HOST_MLME); + host_mlme_tlv->header.len = cpu_to_le16(sizeof(host_mlme_tlv->host_mlme)); + host_mlme_tlv->host_mlme = 1; + pos += sizeof(host_mlme_tlv->header) + sizeof(host_mlme_tlv->host_mlme); + + ssid_tlv = (struct nxpwifi_ie_types_ssid_param_set *)pos; + ssid_tlv->header.type = cpu_to_le16(WLAN_EID_SSID); + ssid_tlv->header.len = cpu_to_le16((u16)bss_desc->ssid.ssid_len); + memcpy(ssid_tlv->ssid, bss_desc->ssid.ssid, + le16_to_cpu(ssid_tlv->header.len)); + pos += sizeof(ssid_tlv->header) + le16_to_cpu(ssid_tlv->header.len); + + phy_tlv = (struct nxpwifi_ie_types_phy_param_set *)pos; + phy_tlv->header.type = cpu_to_le16(WLAN_EID_DS_PARAMS); + phy_tlv->header.len = cpu_to_le16(sizeof(phy_tlv->fh_ds.ds_param_set)); + memcpy(&phy_tlv->fh_ds.ds_param_set, + &bss_desc->phy_param_set.ds_param_set.current_chan, + sizeof(phy_tlv->fh_ds.ds_param_set)); + pos += sizeof(phy_tlv->header) + le16_to_cpu(phy_tlv->header.len); + + ss_tlv = (struct nxpwifi_ie_types_ss_param_set *)pos; + ss_tlv->header.type = cpu_to_le16(WLAN_EID_CF_PARAMS); + ss_tlv->header.len = cpu_to_le16(sizeof(ss_tlv->cf_ibss.cf_param_set)); + pos += sizeof(ss_tlv->header) + le16_to_cpu(ss_tlv->header.len); + + /* Get the common rates supported between the driver and the BSS Desc */ + ret = nxpwifi_setup_rates_from_bssdesc(priv, bss_desc, + rates, &rates_size); + if (ret) + return ret; + + /* Save the data rates into Current BSS state structure */ + priv->curr_bss_params.num_of_rates = rates_size; + memcpy(&priv->curr_bss_params.data_rates, rates, rates_size); + + /* Setup the Rates TLV in the association command */ + rates_tlv = (struct nxpwifi_ie_types_rates_param_set *)pos; + rates_tlv->header.type = cpu_to_le16(WLAN_EID_SUPP_RATES); + rates_tlv->header.len = cpu_to_le16((u16)rates_size); + memcpy(rates_tlv->rates, rates, rates_size); + pos += sizeof(rates_tlv->header) + rates_size; + nxpwifi_dbg(adapter, INFO, "info: ASSOC_CMD: rates size = %d\n", + rates_size); + + /* Add the Authentication type */ + auth_tlv = (struct nxpwifi_ie_types_auth_type *)pos; + auth_tlv->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); + auth_tlv->header.len = cpu_to_le16(sizeof(auth_tlv->auth_type)); + if (priv->sec_info.wep_enabled) + auth_tlv->auth_type = + cpu_to_le16((u16)priv->sec_info.authentication_mode); + else + auth_tlv->auth_type = cpu_to_le16(NL80211_AUTHTYPE_OPEN_SYSTEM); + + pos += sizeof(auth_tlv->header) + le16_to_cpu(auth_tlv->header.len); + + if (priv->sec_info.authentication_mode == WLAN_AUTH_SAE) { + auth_tlv->auth_type = cpu_to_le16(NXPWIFI_AUTHTYPE_SAE); + if (bss_desc->bcn_rsnx_ie && + bss_desc->bcn_rsnx_ie->datalen && + (bss_desc->bcn_rsnx_ie->data[0] & + WLAN_RSNX_CAPA_SAE_H2E)) { + sae_pwe_tlv = + (struct nxpwifi_ie_types_sae_pwe_mode *)pos; + sae_pwe_tlv->header.type = + cpu_to_le16(TLV_TYPE_SAE_PWE_MODE); + sae_pwe_tlv->header.len = + cpu_to_le16(sizeof(sae_pwe_tlv->pwe[0])); + sae_pwe_tlv->pwe[0] = bss_desc->bcn_rsnx_ie->data[0]; + pos += sizeof(sae_pwe_tlv->header) + + sizeof(sae_pwe_tlv->pwe[0]); + } + } + + if (IS_SUPPORT_MULTI_BANDS(adapter) && + !(ISSUPP_11NENABLED(adapter->fw_cap_info) && + !bss_desc->disable_11n && + (priv->config_bands & BAND_GN || + priv->config_bands & BAND_AN) && + bss_desc->bcn_ht_cap)) { + /* Append a channel TLV for the channel the attempted AP was + * found on + */ + chan_tlv = (struct nxpwifi_ie_types_chan_list_param_set *)pos; + chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); + chan_tlv->header.len = + cpu_to_le16(sizeof(struct nxpwifi_chan_scan_param_set)); + + memset(chan_tlv->chan_scan_param, 0x00, + sizeof(struct nxpwifi_chan_scan_param_set)); + chan_tlv->chan_scan_param[0].chan_number = + (bss_desc->phy_param_set.ds_param_set.current_chan); + nxpwifi_dbg(adapter, INFO, "info: Assoc: TLV Chan = %d\n", + chan_tlv->chan_scan_param[0].chan_number); + + chan_tlv->chan_scan_param[0].radio_type = + nxpwifi_band_to_radio_type((u8)bss_desc->bss_band); + + nxpwifi_dbg(adapter, INFO, "info: Assoc: TLV Band = %d\n", + chan_tlv->chan_scan_param[0].radio_type); + pos += sizeof(chan_tlv->header) + + sizeof(struct nxpwifi_chan_scan_param_set); + } + + if (!priv->wps.session_enable) { + if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled) + rsn_ie_len = nxpwifi_append_rsn_ie_wpa_wpa2(priv, &pos); + + if (rsn_ie_len == -ENOMEM) + return -ENOMEM; + } + + if (ISSUPP_11NENABLED(adapter->fw_cap_info) && + !bss_desc->disable_11n && + (priv->config_bands & BAND_GN || + priv->config_bands & BAND_AN)) + nxpwifi_cmd_append_11n_tlv(priv, bss_desc, &pos); + + if (ISSUPP_11ACENABLED(adapter->fw_cap_info) && + !bss_desc->disable_11n && !bss_desc->disable_11ac && + priv->config_bands & BAND_AAC) + nxpwifi_cmd_append_11ac_tlv(priv, bss_desc, &pos); + + if (ISSUPP_11AXENABLED(adapter->fw_cap_ext) && + nxpwifi_11ax_bandconfig_allowed(priv, bss_desc)) + nxpwifi_cmd_append_11ax_tlv(priv, bss_desc, &pos); + + /* Append vendor specific IE TLV */ + nxpwifi_cmd_append_vsie_tlv(priv, NXPWIFI_VSIE_MASK_ASSOC, &pos); + + nxpwifi_wmm_process_association_req(priv, &pos, &bss_desc->wmm_ie, + bss_desc->bcn_ht_cap); + + if (priv->wps.session_enable && priv->wps_ie_len) + nxpwifi_cmd_append_wps_ie(priv, &pos); + + nxpwifi_cmd_append_generic_ie(priv, &pos); + + nxpwifi_cmd_append_tsf_tlv(priv, &pos, bss_desc); + + nxpwifi_11h_process_join(priv, &pos, bss_desc); + + cmd->size = cpu_to_le16((u16)(pos - (u8 *)assoc) + S_DS_GEN); + + /* Set the Capability info at last */ + tmp_cap = bss_desc->cap_info_bitmap; + + if (priv->config_bands == BAND_B) + tmp_cap &= ~WLAN_CAPABILITY_SHORT_SLOT_TIME; + + tmp_cap &= CAPINFO_MASK; + nxpwifi_dbg(adapter, INFO, + "info: ASSOC_CMD: tmp_cap=%4X CAPINFO_MASK=%4lX\n", + tmp_cap, CAPINFO_MASK); + assoc->cap_info_bitmap = cpu_to_le16(tmp_cap); + + return ret; +} + +static const char *assoc_failure_reason_to_str(u16 cap_info) +{ + switch (cap_info) { + case CONNECT_ERR_AUTH_ERR_STA_FAILURE: + return "CONNECT_ERR_AUTH_ERR_STA_FAILURE"; + case CONNECT_ERR_AUTH_MSG_UNHANDLED: + return "CONNECT_ERR_AUTH_MSG_UNHANDLED"; + case CONNECT_ERR_ASSOC_ERR_TIMEOUT: + return "CONNECT_ERR_ASSOC_ERR_TIMEOUT"; + case CONNECT_ERR_ASSOC_ERR_AUTH_REFUSED: + return "CONNECT_ERR_ASSOC_ERR_AUTH_REFUSED"; + case CONNECT_ERR_STA_FAILURE: + return "CONNECT_ERR_STA_FAILURE"; + } + + return "Unknown connect failure"; +} + +/* Association firmware command response handler + * + * The response buffer for the association command has the following + * memory layout. + * + * For cases where an association response was not received (indicated + * by the CapInfo and AId field): + * + * .------------------------------------------------------------. + * | Header(4 * sizeof(t_u16)): Standard command response hdr | + * .------------------------------------------------------------. + * | cap_info/Error Return(t_u16): | + * | 0xFFFF(-1): Internal error | + * | 0xFFFE(-2): Authentication unhandled message | + * | 0xFFFD(-3): Authentication refused | + * | 0xFFFC(-4): Timeout waiting for AP response | + * .------------------------------------------------------------. + * | status_code(t_u16): | + * | If cap_info is -1: | + * | An internal firmware failure prevented the | + * | command from being processed. The status_code | + * | will be set to 1. | + * | | + * | If cap_info is -2: | + * | An authentication frame was received but was | + * | not handled by the firmware. IEEE Status | + * | code for the failure is returned. | + * | | + * | If cap_info is -3: | + * | An authentication frame was received and the | + * | status_code is the IEEE Status reported in the | + * | response. | + * | | + * | If cap_info is -4: | + * | (1) Association response timeout | + * | (2) Authentication response timeout | + * .------------------------------------------------------------. + * | a_id(t_u16): 0xFFFF | + * .------------------------------------------------------------. + * + * + * For cases where an association response was received, the IEEE + * standard association response frame is returned: + * + * .------------------------------------------------------------. + * | Header(4 * sizeof(t_u16)): Standard command response hdr | + * .------------------------------------------------------------. + * | cap_info(t_u16): IEEE Capability | + * .------------------------------------------------------------. + * | status_code(t_u16): IEEE Status Code | + * .------------------------------------------------------------. + * | a_id(t_u16): IEEE Association ID | + * .------------------------------------------------------------. + * | IEEE IEs(variable): Any received IEs comprising the | + * | remaining portion of a received | + * | association response frame. | + * .------------------------------------------------------------. + * + * For simplistic handling, the status_code field can be used to determine + * an association success (0) or failure (non-zero). + */ +int nxpwifi_ret_802_11_associate(struct nxpwifi_private *priv, + struct host_cmd_ds_command *resp) +{ + struct nxpwifi_adapter *adapter = priv->adapter; + int ret = 0; + struct ieee_types_assoc_rsp *assoc_rsp; + struct nxpwifi_bssdescriptor *bss_desc; + bool enable_data = true; + u16 cap_info, status_code, aid; + const u8 *ie_ptr; + struct ieee80211_ht_operation *assoc_resp_ht_oper; + struct ieee80211_mgmt *hdr; + + if (!priv->attempted_bss_desc) { + nxpwifi_dbg(adapter, ERROR, + "%s: failed, association terminated by host\n", + __func__); + goto done; + } + + hdr = (struct ieee80211_mgmt *)&resp->params; + if (!memcmp(hdr->bssid, priv->attempted_bss_desc->mac_address, + ETH_ALEN)) + assoc_rsp = (struct ieee_types_assoc_rsp *)&hdr->u.assoc_resp; + else + assoc_rsp = (struct ieee_types_assoc_rsp *)&resp->params; + + cap_info = le16_to_cpu(assoc_rsp->cap_info_bitmap); + status_code = le16_to_cpu(assoc_rsp->status_code); + aid = le16_to_cpu(assoc_rsp->a_id); + + if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14))) + dev_err(adapter->dev, + "invalid AID value 0x%x; bits 15:14 not set\n", + aid); + + aid &= ~(BIT(15) | BIT(14)); + + priv->assoc_rsp_size = min(le16_to_cpu(resp->size) - S_DS_GEN, + sizeof(priv->assoc_rsp_buf)); + + assoc_rsp->a_id = cpu_to_le16(aid); + memcpy(priv->assoc_rsp_buf, &resp->params, priv->assoc_rsp_size); + + if (status_code) { + adapter->dbg.num_cmd_assoc_failure++; + nxpwifi_dbg(adapter, ERROR, + "ASSOC_RESP: failed,\t" + "status code=%d err=%#x a_id=%#x\n", + status_code, cap_info, + le16_to_cpu(assoc_rsp->a_id)); + + nxpwifi_dbg(adapter, ERROR, "assoc failure: reason %s\n", + assoc_failure_reason_to_str(cap_info)); + if (cap_info == CONNECT_ERR_ASSOC_ERR_TIMEOUT) { + if (status_code == NXPWIFI_ASSOC_CMD_FAILURE_AUTH) { + ret = WLAN_STATUS_AUTH_TIMEOUT; + nxpwifi_dbg(adapter, ERROR, + "ASSOC_RESP: AUTH timeout\n"); + } else { + ret = WLAN_STATUS_UNSPECIFIED_FAILURE; + nxpwifi_dbg(adapter, ERROR, + "ASSOC_RESP: UNSPECIFIED failure\n"); + } + + priv->assoc_rsp_size = 0; + } else { + ret = status_code; + } + + goto done; + } + + /* Send a Media Connected event, according to the Spec */ + priv->media_connected = true; + + adapter->ps_state = PS_STATE_AWAKE; + adapter->pps_uapsd_mode = false; + adapter->tx_lock_flag = false; + + /* Set the attempted BSSID Index to current */ + bss_desc = priv->attempted_bss_desc; + + nxpwifi_dbg(adapter, INFO, "info: ASSOC_RESP: %s\n", + bss_desc->ssid.ssid); + + /* Make a copy of current BSSID descriptor */ + memcpy(&priv->curr_bss_params.bss_descriptor, + bss_desc, sizeof(struct nxpwifi_bssdescriptor)); + + /* Update curr_bss_params */ + priv->curr_bss_params.bss_descriptor.channel = + bss_desc->phy_param_set.ds_param_set.current_chan; + + priv->curr_bss_params.band = (u8)bss_desc->bss_band; + + if (bss_desc->wmm_ie.element_id == WLAN_EID_VENDOR_SPECIFIC) + priv->curr_bss_params.wmm_enabled = true; + else + priv->curr_bss_params.wmm_enabled = false; + + if ((priv->wmm_required || bss_desc->bcn_ht_cap) && + priv->curr_bss_params.wmm_enabled) + priv->wmm_enabled = true; + else + priv->wmm_enabled = false; + + priv->curr_bss_params.wmm_uapsd_enabled = false; + + if (priv->wmm_enabled) + priv->curr_bss_params.wmm_uapsd_enabled = + ((bss_desc->wmm_ie.qos_info & + IEEE80211_WMM_IE_AP_QOSINFO_UAPSD) ? 1 : 0); + + /* Store the bandwidth information from assoc response */ + ie_ptr = cfg80211_find_ie(WLAN_EID_HT_OPERATION, assoc_rsp->ie_buffer, + priv->assoc_rsp_size + - sizeof(struct ieee_types_assoc_rsp)); + if (ie_ptr) { + assoc_resp_ht_oper = (struct ieee80211_ht_operation *)(ie_ptr + + sizeof(struct element)); + priv->assoc_resp_ht_param = assoc_resp_ht_oper->ht_param; + priv->ht_param_present = true; + } else { + priv->ht_param_present = false; + } + + nxpwifi_dbg(adapter, INFO, + "info: ASSOC_RESP: curr_pkt_filter is %#x\n", + priv->curr_pkt_filter); + if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled) + priv->wpa_is_gtk_set = false; + + if (priv->wmm_enabled) { + /* Don't re-enable carrier until we get the WMM_GET_STATUS + * event + */ + enable_data = false; + } else { + /* Since WMM is not enabled, setup the queues with the + * defaults + */ + nxpwifi_wmm_setup_queue_priorities(priv, NULL); + nxpwifi_wmm_setup_ac_downgrade(priv); + } + + if (enable_data) + nxpwifi_dbg(adapter, INFO, + "info: post association, re-enabling data flow\n"); + + /* Reset SNR/NF/RSSI values */ + priv->data_rssi_last = 0; + priv->data_nf_last = 0; + priv->data_rssi_avg = 0; + priv->data_nf_avg = 0; + priv->bcn_rssi_last = 0; + priv->bcn_nf_last = 0; + priv->bcn_rssi_avg = 0; + priv->bcn_nf_avg = 0; + priv->rxpd_rate = 0; + priv->rxpd_htinfo = 0; + + nxpwifi_save_curr_bcn(priv); + + adapter->dbg.num_cmd_assoc_success++; + + nxpwifi_dbg(adapter, MSG, "assoc: associated with %pM\n", + priv->attempted_bss_desc->mac_address); + + /* Add the ra_list here for infra mode as there will be only 1 ra + * always + */ + nxpwifi_ralist_add(priv, + priv->curr_bss_params.bss_descriptor.mac_address); + + netif_carrier_on(priv->netdev); + nxpwifi_wake_up_net_dev_queue(priv->netdev, adapter); + + if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled) + priv->scan_block = true; + else + priv->port_open = true; + +done: + /* Need to indicate IOCTL complete */ + if (adapter->curr_cmd->wait_q_enabled) { + if (ret) + adapter->cmd_wait_q.status = -1; + else + adapter->cmd_wait_q.status = 0; + } + + return ret; +} + +/* This function associates to a specific BSS discovered in a scan. + * + * It clears any past association response stored for application + * retrieval and calls the command preparation routine to send the + * command to firmware. + */ +int nxpwifi_associate(struct nxpwifi_private *priv, + struct nxpwifi_bssdescriptor *bss_desc) +{ + /* Return error if the adapter is not STA role or table entry + * is not marked as infra. + */ + if ((GET_BSS_ROLE(priv) != NXPWIFI_BSS_ROLE_STA) || + bss_desc->bss_mode != NL80211_IFTYPE_STATION) + return -EINVAL; + + if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info) && + !bss_desc->disable_11n && !bss_desc->disable_11ac && + priv->config_bands & BAND_AAC) + nxpwifi_set_11ac_ba_params(priv); + else + nxpwifi_set_ba_params(priv); + + /* Clear any past association response stored for application + * retrieval + */ + priv->assoc_rsp_size = 0; + + return nxpwifi_send_cmd(priv, HOST_CMD_802_11_ASSOCIATE, + HOST_ACT_GEN_SET, 0, bss_desc, true); +} + +/* This function deauthenticates/disconnects from infra network by sending + * deauthentication request. + */ +static int nxpwifi_deauthenticate_infra(struct nxpwifi_private *priv, u8 *mac) +{ + u8 mac_address[ETH_ALEN]; + int ret; + + if (!mac || is_zero_ether_addr(mac)) + memcpy(mac_address, + priv->curr_bss_params.bss_descriptor.mac_address, + ETH_ALEN); + else + memcpy(mac_address, mac, ETH_ALEN); + + ret = nxpwifi_send_cmd(priv, HOST_CMD_802_11_DEAUTHENTICATE, + HOST_ACT_GEN_SET, 0, mac_address, true); + + return ret; +} + +/* This function deauthenticates/disconnects from a BSS. + * + * In case of infra made, it sends deauthentication request, and + * in case of ad-hoc mode, a stop network request is sent to the firmware. + * In AP mode, a command to stop bss is sent to firmware. + */ +int nxpwifi_deauthenticate(struct nxpwifi_private *priv, u8 *mac) +{ + int ret = 0; + + if (!priv->media_connected) + return 0; + + priv->auth_flag = 0; + priv->auth_alg = WLAN_AUTH_NONE; + priv->host_mlme_reg = false; + priv->mgmt_frame_mask = 0; + + ret = nxpwifi_send_cmd(priv, HOST_CMD_MGMT_FRAME_REG, + HOST_ACT_GEN_SET, 0, + &priv->mgmt_frame_mask, false); + if (ret) { + nxpwifi_dbg(priv->adapter, ERROR, + "could not unregister mgmt frame rx\n"); + return ret; + } + + switch (priv->bss_mode) { + case NL80211_IFTYPE_STATION: + ret = nxpwifi_deauthenticate_infra(priv, mac); + if (ret) + cfg80211_disconnected(priv->netdev, 0, NULL, 0, + true, GFP_KERNEL); + break; + case NL80211_IFTYPE_AP: + ret = nxpwifi_send_cmd(priv, HOST_CMD_UAP_BSS_STOP, + HOST_ACT_GEN_SET, 0, NULL, true); + default: + break; + } + + return ret; +} + +/* This function deauthenticates/disconnects from all BSS. */ +void nxpwifi_deauthenticate_all(struct nxpwifi_adapter *adapter) +{ + struct nxpwifi_private *priv; + int i; + + for (i = 0; i < adapter->priv_num; i++) { + priv = adapter->priv[i]; + nxpwifi_deauthenticate(priv, NULL); + } +} +EXPORT_SYMBOL_GPL(nxpwifi_deauthenticate_all); + +/* This function converts band to radio type used in channel TLV. + */ +u8 nxpwifi_band_to_radio_type(u16 config_bands) +{ + if (config_bands & BAND_A || config_bands & BAND_AN || + config_bands & BAND_AAC || config_bands & BAND_AAX) + return HOST_SCAN_RADIO_TYPE_A; + + return HOST_SCAN_RADIO_TYPE_BG; +}