From patchwork Fri Jun 21 07:51:51 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: David Lin X-Patchwork-Id: 806682 Received: from EUR04-HE1-obe.outbound.protection.outlook.com (mail-he1eur04on2046.outbound.protection.outlook.com [40.107.7.46]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id F25221741F6; Fri, 21 Jun 2024 07:54:08 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=fail smtp.client-ip=40.107.7.46 ARC-Seal: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718956453; cv=fail; b=cmf9MWk6Z2uoBqsFBKp9wj/rFGhCYDEeToVAmUcn5USTXcMIJWvMRpjHD91/CfzY6Ur+96LpV/NVf6X/K6If7J2x9azH9sz2suRop1O+uE+ln6XZriumE6++QarkUw4/gK+UK/3oLjxOin+T43+JVAivWNaBvsUUi8JNL7M+7xI= ARC-Message-Signature: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718956453; c=relaxed/simple; bh=P/mcp5L22eMSTulZxW7iFABO0Fr0mWuczcx9Kc4oej8=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: Content-Type:MIME-Version; b=sCCSsJoGK4DMaFhR19CplXw7KvwxrK2++iLpnIuL4W/TmmQ4aldJonhe7DTajZja9XoK61Zjf42cfG7NwhI1SsTjfGBF7N1zp9x3iA/XE5idUDzpkVavw/ftGmyyjPKrwGTADbV0eEVYYyuK0ytAmra27KxIP03FXkjU+Co7kf8= ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=nxp.com; spf=pass smtp.mailfrom=nxp.com; dkim=pass (1024-bit key) header.d=nxp.com header.i=@nxp.com header.b=Dl4qd9Oy; arc=fail smtp.client-ip=40.107.7.46 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=nxp.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=nxp.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=nxp.com header.i=@nxp.com header.b="Dl4qd9Oy" ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=RKqPC5fJlIAZ3Wk/q6qj04R3vQZ2C0GlPAJgAEZuQntU/6XN86AuR0SvWJ1mZGxuo/n7knsF9JYxnZFBGMDGliVtgFOuH2ycenaK2cCFwGQqjIDTkLSvustCqY5bklRG00a+DxWdvngd2/2SB1K3Rfwq0QmIvETK40M+EEa+63qD7yXaZpgtc/weThUBXGuBCTJfLreRMYAvWy8dqRSs693H3M/G+wRgrfdqCOBAeqmMvdUVBfG1PMyqi5Ybi+iAKvvJcSJGZiRQK+tvuMyVEgCYTg/Ot1qX4Zka2VaL74UBqt3t61MhFpbNOgWMDwOqenAeu1DJWhRSLs3droXw1A== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=vszfFQY6HkZ2cM0O92DsJHkJ6U5K1ANyHXF2RgX4OFQ=; b=hcIb0jRE22xQCWbQm1tG9hkJn1bDw/BaaKclJXZ25OF5BR7MKdFSbu/oMqi2KMqtg0gTsfD9cTpqRbM70zGqIduzNs0cRp+9MJUgzw8P09aAO6rWOIBuZ6y2Bz/5iwIZoTfJJiC3MQnwuLjyJoCU7hsq5FkLnv5GEye0QNdi5fCXt+bx+NT+T/DHaFxOEPDl+R0nQI3JfK75/LKC7qKDyKKnfJjHA5aK9zdmS35FVoToqU506ZBOnGxErjahF/gnbuUfVLPACFWYRj/7VSWBR6aDZfJLQEL+Yr4aN53NUyWicyOh1+nKwMrBhSO7wUcZSBzAxaw9RsCFjcE8RI9cUw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=nxp.com; dmarc=pass action=none header.from=nxp.com; dkim=pass header.d=nxp.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=nxp.com; s=selector2; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=vszfFQY6HkZ2cM0O92DsJHkJ6U5K1ANyHXF2RgX4OFQ=; b=Dl4qd9OyOvR91Ah5CYZwg66aa4LQMDYOe7o9j5WLkbvQlCGXdOUKJRr21lr3d9W/OlpNHsZ0i6/u9zRFpG29onRKPY/HQCjg5NpxZAr91B9thVpTg6x3mlIZxEzZahIoU5xT1Wj81ETvyGqQmRescckdUzT2aIBbFODIA3LH8ak= Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=nxp.com; Received: from PA4PR04MB9638.eurprd04.prod.outlook.com (2603:10a6:102:273::20) by AS8PR04MB9190.eurprd04.prod.outlook.com (2603:10a6:20b:44d::21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7698.22; Fri, 21 Jun 2024 07:54:01 +0000 Received: from PA4PR04MB9638.eurprd04.prod.outlook.com ([fe80::f950:3bb6:6848:2257]) by PA4PR04MB9638.eurprd04.prod.outlook.com ([fe80::f950:3bb6:6848:2257%4]) with mapi id 15.20.7677.030; Fri, 21 Jun 2024 07:54:01 +0000 From: David Lin To: linux-wireless@vger.kernel.org Cc: linux-kernel@vger.kernel.org, briannorris@chromium.org, kvalo@kernel.org, francesco@dolcini.it, tsung-hsien.hsieh@nxp.com, David Lin Subject: [PATCH 26/43] wifi: nxpwifi: add sdio.c Date: Fri, 21 Jun 2024 15:51:51 +0800 Message-Id: <20240621075208.513497-27-yu-hao.lin@nxp.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240621075208.513497-1-yu-hao.lin@nxp.com> References: <20240621075208.513497-1-yu-hao.lin@nxp.com> X-ClientProxiedBy: AM0PR02CA0115.eurprd02.prod.outlook.com (2603:10a6:20b:28c::12) To PA4PR04MB9638.eurprd04.prod.outlook.com (2603:10a6:102:273::20) Precedence: bulk X-Mailing-List: linux-wireless@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: PA4PR04MB9638:EE_|AS8PR04MB9190:EE_ X-MS-Office365-Filtering-Correlation-Id: 793aa944-07f5-46fc-76b5-08dc91c7500c X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; ARA:13230037|1800799021|52116011|376011|366013|38350700011; X-Microsoft-Antispam-Message-Info: n13wZDTgMULy1WeseyjyAUrNWSyjbT8BWg/dfC2TM5+USYFi7uS27flT4AEQvQBoEoxiqTMdAr9QSLNRW6V+tBBfj/y9bqozhqzkITllGr00cWKwIJcExZIsbHJCZ4704PF3OcRwy/dO+SCLHtYIRabQPu3lAftzfgQPdU3eP2iwQBn5PN2sliHIiejFZFDCvOvg5HoLjrwZ6kpQDsF+KOoeFxViisgAzcbPoNznJvaWzwl0fb0rEJy2nW+WKSfkUxM4mswZlQS7ujcHGigfuH6dGmKkC7lTYRW9OqjxJLtfRxWsLj0SvEcrjGhOPzx/1yc5h8i5en37EjQTu+I6xANUsuLp11hGUgEdao9ToX7Ylyk5+zwKBp429LqLIM7DM4Cw6Z+xPAenpNk68rIsj8YCHdFMxyF0fS3oc7Ye79NBHsK9zJdPiW0i+ByVnFWqf04YogVw20vDFhSdJqMECYBwH5Gy0lB1WQtHDg1eE9R2Lm/VWtqDWGIMuHtYHIpglbtJ6zWn/RQ9qAbncJFjEDX2w2tMIoHZTPI6a48cWHeKk7w4zohZp2m8LGKmgmzYW+B2nM6iegmcCbcvuwNrbObWNx3zTzkRHEe9r91+vl8whYACdYEnKtbLQ5EhLRYJXsKjywtfODfDaeY6XtaqC/ZhuMwXO1UvKeZ3dVJTSmpvqFMfqfornZNKippXz+jqFkwIloG47YKrUW9ubUHE63kJctKH9RgDob6JN5lMRjs3GcJ8p0Ct1bhKbISmkgPB1RDlwsiietUQ3eNTi87eI1R8hB4Boq/sPKObiB3X54MLIOBj/EiRS0VHMDX537Xts5CCuO1cQhb6YZQlL+ZgS5aE4V1UdjDz4eWsBKmeUmAUiBrOxML4l0puGIxC3QUts2rtJbhchPRT0md3ZB16T92JyRyqV2Ni82U1bw+W+sYTq93Tq3tiYePSbLT01dH1JmC4sfCXB7Ej2RI0N1ioB7P/L/dJt4Or5bh9xADuahahsHAqiVkc9wVfO852g9ch5mo9pEM5wP4sRZSeeGG3KQKDXxs44TtJEF1BibnCWcqJNDfZin75KISicDADXdfJO0sM/wAOvUvYmEarHYsfk5dZFvmzgmMyufblMJHzEAypcXVkHN4+uiLAEdvDnSXN25DXmnSBQS4VBoV44lvacJuuncufFbz+FAHpx2fBtn7+y8ZjZGiSsWA1L2l9+tIpRIQD+YZSrqD/SLk/c1axLOu9bKA8JyLR9HkM0ZN5jfz3Xof9mAF8mB65795AdEfuPapFeU6wg2BkVUfyDxSwDbAlQwTNxcVfgE6HRtIp4e3whloCFRpr7D8qIpE7xXAtg3lPu3vcIQGNx/XdA1CXyvuPFLsiYZTkV7WFDqkgLRw= X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:PA4PR04MB9638.eurprd04.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230037)(1800799021)(52116011)(376011)(366013)(38350700011); DIR:OUT; SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: nxp.com X-MS-Exchange-CrossTenant-Network-Message-Id: 793aa944-07f5-46fc-76b5-08dc91c7500c X-MS-Exchange-CrossTenant-AuthSource: PA4PR04MB9638.eurprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 21 Jun 2024 07:54:01.8493 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: faUp+gmldIZbXIsLyhK8cgfhbFa8MT6Za8nKeKDPztxoQ6guY1LoJlLPQ+chQsWGzS/UXngNfyeY3CSgTrYcEw== X-MS-Exchange-Transport-CrossTenantHeadersStamped: AS8PR04MB9190 Signed-off-by: David Lin --- drivers/net/wireless/nxp/nxpwifi/sdio.c | 2646 +++++++++++++++++++++++ 1 file changed, 2646 insertions(+) create mode 100644 drivers/net/wireless/nxp/nxpwifi/sdio.c diff --git a/drivers/net/wireless/nxp/nxpwifi/sdio.c b/drivers/net/wireless/nxp/nxpwifi/sdio.c new file mode 100644 index 000000000000..962c9b2f7db2 --- /dev/null +++ b/drivers/net/wireless/nxp/nxpwifi/sdio.c @@ -0,0 +1,2646 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * NXP Wireless LAN device driver: SDIO specific handling + * + * Copyright 2011-2024 NXP + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" +#include "11n.h" +#include "sdio.h" + +#define SDIO_VERSION "1.0" + +static void nxpwifi_sdio_work(struct work_struct *work); + +static struct nxpwifi_if_ops sdio_ops; + +static const struct nxpwifi_sdio_card_reg nxpwifi_reg_iw61x = { + .start_rd_port = 0, + .start_wr_port = 0, + .base_0_reg = 0xF8, + .base_1_reg = 0xF9, + .poll_reg = 0x5C, + .host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK | + CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK, + .host_int_rsr_reg = 0x4, + .host_int_status_reg = 0x0C, + .host_int_mask_reg = 0x08, + .host_strap_reg = 0xF4, + .host_strap_mask = 0x01, + .host_strap_value = 0x00, + .status_reg_0 = 0xE8, + .status_reg_1 = 0xE9, + .sdio_int_mask = 0xff, + .data_port_mask = 0xffffffff, + .io_port_0_reg = 0xE4, + .io_port_1_reg = 0xE5, + .io_port_2_reg = 0xE6, + .max_mp_regs = 196, + .rd_bitmap_l = 0x10, + .rd_bitmap_u = 0x11, + .rd_bitmap_1l = 0x12, + .rd_bitmap_1u = 0x13, + .wr_bitmap_l = 0x14, + .wr_bitmap_u = 0x15, + .wr_bitmap_1l = 0x16, + .wr_bitmap_1u = 0x17, + .rd_len_p0_l = 0x18, + .rd_len_p0_u = 0x19, + .card_misc_cfg_reg = 0xd8, + .card_cfg_2_1_reg = 0xd9, + .cmd_rd_len_0 = 0xc0, + .cmd_rd_len_1 = 0xc1, + .cmd_rd_len_2 = 0xc2, + .cmd_rd_len_3 = 0xc3, + .cmd_cfg_0 = 0xc4, + .cmd_cfg_1 = 0xc5, + .cmd_cfg_2 = 0xc6, + .cmd_cfg_3 = 0xc7, + .fw_dump_host_ready = 0xcc, + .fw_dump_ctrl = 0xf9, + .fw_dump_start = 0xf1, + .fw_dump_end = 0xf8, + .func1_dump_reg_start = 0x10, + .func1_dump_reg_end = 0x17, + .func1_scratch_reg = 0xE8, + .func1_spec_reg_num = 13, + .func1_spec_reg_table = {0x08, 0x58, 0x5C, 0x5D, 0x60, + 0x61, 0x62, 0x64, 0x65, 0x66, + 0x68, 0x69, 0x6a}, +}; + +static const struct nxpwifi_sdio_device nxpwifi_sdio_iw61x = { + .firmware = IW61X_SDIO_FW_NAME, + .reg = &nxpwifi_reg_iw61x, + .max_ports = 32, + .mp_agg_pkt_limit = 16, + .tx_buf_size = NXPWIFI_TX_DATA_BUF_SIZE_4K, + .mp_tx_agg_buf_size = NXPWIFI_MP_AGGR_BSIZE_MAX, + .mp_rx_agg_buf_size = NXPWIFI_MP_AGGR_BSIZE_MAX, + .can_dump_fw = true, + .fw_dump_enh = true, + .can_ext_scan = true, +}; + +static struct memory_type_mapping generic_mem_type_map[] = { + {"DUMP", NULL, 0, 0xDD}, +}; + +static struct memory_type_mapping mem_type_mapping_tbl[] = { + {"ITCM", NULL, 0, 0xF0}, + {"DTCM", NULL, 0, 0xF1}, + {"SQRAM", NULL, 0, 0xF2}, + {"APU", NULL, 0, 0xF3}, + {"CIU", NULL, 0, 0xF4}, + {"ICU", NULL, 0, 0xF5}, + {"MAC", NULL, 0, 0xF6}, + {"EXT7", NULL, 0, 0xF7}, + {"EXT8", NULL, 0, 0xF8}, + {"EXT9", NULL, 0, 0xF9}, + {"EXT10", NULL, 0, 0xFA}, + {"EXT11", NULL, 0, 0xFB}, + {"EXT12", NULL, 0, 0xFC}, + {"EXT13", NULL, 0, 0xFD}, + {"EXTLAST", NULL, 0, 0xFE}, +}; + +static const struct of_device_id nxpwifi_sdio_of_match_table[] __maybe_unused = { + { } +}; + +/* This function parse device tree node using mmc subnode devicetree API. + * The device node is saved in card->plt_of_node. + * if the device tree node exist and include interrupts attributes, this + * function will also request platform specific wakeup interrupt. + */ +static int nxpwifi_sdio_probe_of(struct device *dev) +{ + if (!of_match_node(nxpwifi_sdio_of_match_table, dev->of_node)) { + dev_err(dev, "required compatible string missing\n"); + return -EINVAL; + } + + return 0; +} + +/* SDIO probe. + * + * This function probes an nxpwifi device and registers it. It allocates + * the card structure, enables SDIO function number and initiates the + * device registration and initialization procedure by adding a logical + * interface. + */ +static int +nxpwifi_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id) +{ + int ret; + struct sdio_mmc_card *card = NULL; + + pr_debug("info: vendor=0x%4.04X device=0x%4.04X class=%d function=%d\n", + func->vendor, func->device, func->class, func->num); + + card = devm_kzalloc(&func->dev, sizeof(*card), GFP_KERNEL); + if (!card) + return -ENOMEM; + + init_completion(&card->fw_done); + + card->func = func; + + func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; + + if (id->driver_data) { + struct nxpwifi_sdio_device *data = (void *)id->driver_data; + + card->firmware = data->firmware; + card->firmware_sdiouart = data->firmware_sdiouart; + card->reg = data->reg; + card->max_ports = data->max_ports; + card->mp_agg_pkt_limit = data->mp_agg_pkt_limit; + card->tx_buf_size = data->tx_buf_size; + card->mp_tx_agg_buf_size = data->mp_tx_agg_buf_size; + card->mp_rx_agg_buf_size = data->mp_rx_agg_buf_size; + card->can_dump_fw = data->can_dump_fw; + card->fw_dump_enh = data->fw_dump_enh; + card->can_ext_scan = data->can_ext_scan; + INIT_WORK(&card->work, nxpwifi_sdio_work); + } + + sdio_claim_host(func); + ret = sdio_enable_func(func); + sdio_release_host(func); + + if (ret) { + dev_err(&func->dev, "failed to enable function\n"); + return ret; + } + + /* device tree node parsing and platform specific configuration*/ + if (func->dev.of_node) { + ret = nxpwifi_sdio_probe_of(&func->dev); + if (ret) + goto err_disable; + } + + ret = nxpwifi_add_card(card, &card->fw_done, &sdio_ops, + NXPWIFI_SDIO, &func->dev); + if (ret) { + dev_err(&func->dev, "add card failed\n"); + goto err_disable; + } + + return 0; + +err_disable: + sdio_claim_host(func); + sdio_disable_func(func); + sdio_release_host(func); + + return ret; +} + +/* SDIO resume. + * + * Kernel needs to suspend all functions separately. Therefore all + * registered functions must have drivers with suspend and resume + * methods. Failing that the kernel simply removes the whole card. + * + * If already not resumed, this function turns on the traffic and + * sends a host sleep cancel request to the firmware. + */ +static int nxpwifi_sdio_resume(struct device *dev) +{ + struct sdio_func *func = dev_to_sdio_func(dev); + struct sdio_mmc_card *card; + struct nxpwifi_adapter *adapter; + + card = sdio_get_drvdata(func); + if (!card || !card->adapter) { + dev_err(dev, "resume: invalid card or adapter\n"); + return 0; + } + + adapter = card->adapter; + + if (!test_bit(NXPWIFI_IS_SUSPENDED, &adapter->work_flags)) { + nxpwifi_dbg(adapter, WARN, + "device already resumed\n"); + return 0; + } + + clear_bit(NXPWIFI_IS_SUSPENDED, &adapter->work_flags); + + /* Disable Host Sleep */ + nxpwifi_cancel_hs(nxpwifi_get_priv(adapter, NXPWIFI_BSS_ROLE_STA), + NXPWIFI_SYNC_CMD); + + nxpwifi_disable_wake(adapter); + + return 0; +} + +/* Write data into SDIO card register. Caller claims SDIO device. */ +static int +nxpwifi_write_reg_locked(struct sdio_func *func, u32 reg, u8 data) +{ + int ret = -1; + + sdio_writeb(func, data, reg, &ret); + return ret; +} + +/* This function writes data into SDIO card register. + */ +static int +nxpwifi_write_reg(struct nxpwifi_adapter *adapter, u32 reg, u8 data) +{ + struct sdio_mmc_card *card = adapter->card; + int ret; + + sdio_claim_host(card->func); + ret = nxpwifi_write_reg_locked(card->func, reg, data); + sdio_release_host(card->func); + + return ret; +} + +/* This function reads data from SDIO card register. + */ +static int +nxpwifi_read_reg(struct nxpwifi_adapter *adapter, u32 reg, u8 *data) +{ + struct sdio_mmc_card *card = adapter->card; + int ret = -1; + u8 val; + + sdio_claim_host(card->func); + val = sdio_readb(card->func, reg, &ret); + sdio_release_host(card->func); + + *data = val; + + return ret; +} + +/* This function writes multiple data into SDIO card memory. + * + * This does not work in suspended mode. + */ +static int +nxpwifi_write_data_sync(struct nxpwifi_adapter *adapter, + u8 *buffer, u32 pkt_len, u32 port) +{ + struct sdio_mmc_card *card = adapter->card; + int ret; + u8 blk_mode = + (port & NXPWIFI_SDIO_BYTE_MODE_MASK) ? BYTE_MODE : BLOCK_MODE; + u32 blk_size = (blk_mode == BLOCK_MODE) ? NXPWIFI_SDIO_BLOCK_SIZE : 1; + u32 blk_cnt = + (blk_mode == + BLOCK_MODE) ? (pkt_len / + NXPWIFI_SDIO_BLOCK_SIZE) : pkt_len; + u32 ioport = (port & NXPWIFI_SDIO_IO_PORT_MASK); + + if (test_bit(NXPWIFI_IS_SUSPENDED, &adapter->work_flags)) { + nxpwifi_dbg(adapter, ERROR, + "%s: not allowed while suspended\n", __func__); + return -1; + } + + sdio_claim_host(card->func); + + ret = sdio_writesb(card->func, ioport, buffer, blk_cnt * blk_size); + + sdio_release_host(card->func); + + return ret; +} + +/* This function reads multiple data from SDIO card memory. + */ +static int nxpwifi_read_data_sync(struct nxpwifi_adapter *adapter, u8 *buffer, + u32 len, u32 port, u8 claim) +{ + struct sdio_mmc_card *card = adapter->card; + int ret; + u8 blk_mode = (port & NXPWIFI_SDIO_BYTE_MODE_MASK) ? BYTE_MODE + : BLOCK_MODE; + u32 blk_size = (blk_mode == BLOCK_MODE) ? NXPWIFI_SDIO_BLOCK_SIZE : 1; + u32 blk_cnt = (blk_mode == BLOCK_MODE) ? (len / NXPWIFI_SDIO_BLOCK_SIZE) + : len; + u32 ioport = (port & NXPWIFI_SDIO_IO_PORT_MASK); + + if (claim) + sdio_claim_host(card->func); + + ret = sdio_readsb(card->func, buffer, ioport, blk_cnt * blk_size); + + if (claim) + sdio_release_host(card->func); + + return ret; +} + +/* This function reads the firmware status. + */ +static int +nxpwifi_sdio_read_fw_status(struct nxpwifi_adapter *adapter, u16 *dat) +{ + struct sdio_mmc_card *card = adapter->card; + const struct nxpwifi_sdio_card_reg *reg = card->reg; + u8 fws0, fws1; + + if (nxpwifi_read_reg(adapter, reg->status_reg_0, &fws0)) + return -1; + + if (nxpwifi_read_reg(adapter, reg->status_reg_1, &fws1)) + return -1; + + *dat = (u16)((fws1 << 8) | fws0); + return 0; +} + +/* This function checks the firmware status in card. + */ +static int nxpwifi_check_fw_status(struct nxpwifi_adapter *adapter, + u32 poll_num) +{ + int ret = 0; + u16 firmware_stat = 0; + u32 tries; + + for (tries = 0; tries < poll_num; tries++) { + ret = nxpwifi_sdio_read_fw_status(adapter, &firmware_stat); + if (ret) + continue; + if (firmware_stat == FIRMWARE_READY_SDIO) { + ret = 0; + break; + } + + msleep(100); + ret = -1; + } + + if (firmware_stat == FIRMWARE_READY_SDIO) + /* firmware might pretend to be ready, when it's not. + * Wait a little bit more as a workaround. + */ + msleep(100); + + return ret; +} + +/* This function checks if WLAN is the winner. + */ +static int nxpwifi_check_winner_status(struct nxpwifi_adapter *adapter) +{ + int ret = 0; + u8 winner = 0; + struct sdio_mmc_card *card = adapter->card; + + if (nxpwifi_read_reg(adapter, card->reg->status_reg_0, &winner)) + return -1; + + if (winner) + adapter->winner = 0; + else + adapter->winner = 1; + + return ret; +} + +/* SDIO remove. + * + * This function removes the interface and frees up the card structure. + */ +static void +nxpwifi_sdio_remove(struct sdio_func *func) +{ + struct sdio_mmc_card *card; + struct nxpwifi_adapter *adapter; + struct nxpwifi_private *priv; + int ret = 0; + u16 firmware_stat; + + card = sdio_get_drvdata(func); + if (!card) + return; + + wait_for_completion(&card->fw_done); + + adapter = card->adapter; + if (!adapter || !adapter->priv_num) + return; + + nxpwifi_dbg(adapter, INFO, "info: SDIO func num=%d\n", func->num); + + ret = nxpwifi_sdio_read_fw_status(adapter, &firmware_stat); + if (!ret && firmware_stat == FIRMWARE_READY_SDIO) { + nxpwifi_deauthenticate_all(adapter); + + priv = nxpwifi_get_priv(adapter, NXPWIFI_BSS_ROLE_ANY); + nxpwifi_disable_auto_ds(priv); + nxpwifi_init_shutdown_fw(priv, NXPWIFI_FUNC_SHUTDOWN); + } + + nxpwifi_remove_card(adapter); +} + +/* SDIO suspend. + * + * Kernel needs to suspend all functions separately. Therefore all + * registered functions must have drivers with suspend and resume + * methods. Failing that the kernel simply removes the whole card. + * + * If already not suspended, this function allocates and sends a host + * sleep activate request to the firmware and turns off the traffic. + */ +static int nxpwifi_sdio_suspend(struct device *dev) +{ + struct sdio_func *func = dev_to_sdio_func(dev); + struct sdio_mmc_card *card; + struct nxpwifi_adapter *adapter; + mmc_pm_flag_t pm_flag = 0; + int ret = 0; + + pm_flag = sdio_get_host_pm_caps(func); + pr_debug("cmd: %s: suspend: PM flag = 0x%x\n", + sdio_func_id(func), pm_flag); + if (!(pm_flag & MMC_PM_KEEP_POWER)) { + dev_err(dev, + "%s: cannot remain alive while host is suspended\n", + sdio_func_id(func)); + return -EPERM; + } + + card = sdio_get_drvdata(func); + if (!card) { + dev_err(dev, "suspend: invalid card\n"); + return 0; + } + + /* Might still be loading firmware */ + wait_for_completion(&card->fw_done); + + adapter = card->adapter; + if (!adapter) { + dev_err(dev, "adapter is not valid\n"); + return 0; + } + + if (!adapter->is_up) + return -EBUSY; + + nxpwifi_enable_wake(adapter); + + /* Enable the Host Sleep */ + if (!nxpwifi_enable_hs(adapter)) { + nxpwifi_dbg(adapter, ERROR, + "cmd: failed to suspend\n"); + clear_bit(NXPWIFI_IS_HS_ENABLING, &adapter->work_flags); + nxpwifi_disable_wake(adapter); + return -EFAULT; + } + + nxpwifi_dbg(adapter, INFO, + "cmd: suspend with MMC_PM_KEEP_POWER\n"); + ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); + + /* Indicate device suspended */ + set_bit(NXPWIFI_IS_SUSPENDED, &adapter->work_flags); + clear_bit(NXPWIFI_IS_HS_ENABLING, &adapter->work_flags); + + return ret; +} + +static void nxpwifi_sdio_coredump(struct device *dev) +{ + struct sdio_func *func = dev_to_sdio_func(dev); + struct sdio_mmc_card *card; + + card = sdio_get_drvdata(func); + if (!test_and_set_bit(NXPWIFI_IFACE_WORK_DEVICE_DUMP, + &card->work_flags)) + schedule_work(&card->work); +} + +/* WLAN IDs */ +static const struct sdio_device_id nxpwifi_ids[] = { + {SDIO_DEVICE(SDIO_VENDOR_ID_NXP, SDIO_DEVICE_ID_NXP_IW61X), + .driver_data = (unsigned long)&nxpwifi_sdio_iw61x}, + {}, +}; + +MODULE_DEVICE_TABLE(sdio, nxpwifi_ids); + +static const struct dev_pm_ops nxpwifi_sdio_pm_ops = { + .suspend = nxpwifi_sdio_suspend, + .resume = nxpwifi_sdio_resume, +}; + +static struct sdio_driver nxpwifi_sdio = { + .name = "nxpwifi_sdio", + .id_table = nxpwifi_ids, + .probe = nxpwifi_sdio_probe, + .remove = nxpwifi_sdio_remove, + .drv = { + .owner = THIS_MODULE, + .coredump = nxpwifi_sdio_coredump, + .pm = &nxpwifi_sdio_pm_ops, + } +}; + +/* This function wakes up the card. + * + * A host power up command is written to the card configuration + * register to wake up the card. + */ +static int nxpwifi_pm_wakeup_card(struct nxpwifi_adapter *adapter) +{ + nxpwifi_dbg(adapter, EVENT, + "event: wakeup device...\n"); + + return nxpwifi_write_reg(adapter, CONFIGURATION_REG, HOST_POWER_UP); +} + +/* This function is called after the card has woken up. + * + * The card configuration register is reset. + */ +static int nxpwifi_pm_wakeup_card_complete(struct nxpwifi_adapter *adapter) +{ + nxpwifi_dbg(adapter, EVENT, + "cmd: wakeup device completed\n"); + + return nxpwifi_write_reg(adapter, CONFIGURATION_REG, 0); +} + +static int nxpwifi_sdio_dnld_fw(struct nxpwifi_adapter *adapter, + struct nxpwifi_fw_image *fw) +{ + struct sdio_mmc_card *card = adapter->card; + int ret; + + sdio_claim_host(card->func); + ret = nxpwifi_dnld_fw(adapter, fw); + sdio_release_host(card->func); + + return ret; +} + +/* This function is used to initialize IO ports for the + * chipsets supporting SDIO new mode. + */ +static int nxpwifi_init_sdio_new_mode(struct nxpwifi_adapter *adapter) +{ + u8 reg; + struct sdio_mmc_card *card = adapter->card; + + adapter->ioport = MEM_PORT; + + /* enable sdio new mode */ + if (nxpwifi_read_reg(adapter, card->reg->card_cfg_2_1_reg, ®)) + return -1; + if (nxpwifi_write_reg(adapter, card->reg->card_cfg_2_1_reg, + reg | CMD53_NEW_MODE)) + return -1; + + /* Configure cmd port and enable reading rx length from the register */ + if (nxpwifi_read_reg(adapter, card->reg->cmd_cfg_0, ®)) + return -1; + if (nxpwifi_write_reg(adapter, card->reg->cmd_cfg_0, + reg | CMD_PORT_RD_LEN_EN)) + return -1; + + /* Enable Dnld/Upld ready auto reset for cmd port after cmd53 is + * completed + */ + if (nxpwifi_read_reg(adapter, card->reg->cmd_cfg_1, ®)) + return -1; + if (nxpwifi_write_reg(adapter, card->reg->cmd_cfg_1, + reg | CMD_PORT_AUTO_EN)) + return -1; + + return 0; +} + +/* This function initializes the IO ports. + * + * The following operations are performed - + * - Read the IO ports (0, 1 and 2) + * - Set host interrupt Reset-To-Read to clear + * - Set auto re-enable interrupt + */ +static int nxpwifi_init_sdio_ioport(struct nxpwifi_adapter *adapter) +{ + u8 reg; + struct sdio_mmc_card *card = adapter->card; + + if (nxpwifi_init_sdio_new_mode(adapter)) + return -1; + + nxpwifi_dbg(adapter, INFO, + "info: SDIO FUNC1 IO port: %#x\n", adapter->ioport); + + /* Set Host interrupt reset to read to clear */ + if (nxpwifi_read_reg(adapter, card->reg->host_int_rsr_reg, ®)) + return -1; + if (nxpwifi_write_reg(adapter, card->reg->host_int_rsr_reg, + reg | card->reg->sdio_int_mask)) + return -1; + + /* Dnld/Upld ready set to auto reset */ + if (nxpwifi_read_reg(adapter, card->reg->card_misc_cfg_reg, ®)) + return -1; + if (nxpwifi_write_reg(adapter, card->reg->card_misc_cfg_reg, + reg | AUTO_RE_ENABLE_INT)) + return -1; + + return 0; +} + +/* This function sends data to the card. + */ +static int nxpwifi_write_data_to_card(struct nxpwifi_adapter *adapter, + u8 *payload, u32 pkt_len, u32 port) +{ + u32 i = 0; + int ret; + + do { + ret = nxpwifi_write_data_sync(adapter, payload, pkt_len, port); + if (ret) { + i++; + nxpwifi_dbg(adapter, ERROR, + "host_to_card, write iomem\t" + "(%d) failed: %d\n", i, ret); + if (nxpwifi_write_reg(adapter, CONFIGURATION_REG, 0x04)) + nxpwifi_dbg(adapter, ERROR, + "write CFG reg failed\n"); + + ret = -1; + if (i > MAX_WRITE_IOMEM_RETRY) + return ret; + } + } while (ret == -1); + + return ret; +} + +/* This function gets the read port. + * + * If control port bit is set in MP read bitmap, the control port + * is returned, otherwise the current read port is returned and + * the value is increased (provided it does not reach the maximum + * limit, in which case it is reset to 1) + */ +static int nxpwifi_get_rd_port(struct nxpwifi_adapter *adapter, u8 *port) +{ + struct sdio_mmc_card *card = adapter->card; + const struct nxpwifi_sdio_card_reg *reg = card->reg; + u32 rd_bitmap = card->mp_rd_bitmap; + + nxpwifi_dbg(adapter, DATA, + "data: mp_rd_bitmap=0x%08x\n", rd_bitmap); + + if (!(rd_bitmap & reg->data_port_mask)) + return -1; + + if (!(card->mp_rd_bitmap & (1 << card->curr_rd_port))) + return -1; + + /* We are now handling the SDIO data ports */ + card->mp_rd_bitmap &= (u32)(~(1 << card->curr_rd_port)); + *port = card->curr_rd_port; + + if (++card->curr_rd_port == card->max_ports) + card->curr_rd_port = reg->start_rd_port; + + nxpwifi_dbg(adapter, DATA, + "data: port=%d mp_rd_bitmap=0x%08x -> 0x%08x\n", + *port, rd_bitmap, card->mp_rd_bitmap); + + return 0; +} + +/* This function gets the write port for data. + * + * The current write port is returned if available and the value is + * increased (provided it does not reach the maximum limit, in which + * case it is reset to 1) + */ +static int nxpwifi_get_wr_port_data(struct nxpwifi_adapter *adapter, u32 *port) +{ + struct sdio_mmc_card *card = adapter->card; + const struct nxpwifi_sdio_card_reg *reg = card->reg; + u32 wr_bitmap = card->mp_wr_bitmap; + + nxpwifi_dbg(adapter, DATA, + "data: mp_wr_bitmap=0x%08x\n", wr_bitmap); + + if (!(wr_bitmap & card->mp_data_port_mask)) { + adapter->data_sent = true; + return -EBUSY; + } + + if (card->mp_wr_bitmap & (1 << card->curr_wr_port)) { + card->mp_wr_bitmap &= (u32)(~(1 << card->curr_wr_port)); + *port = card->curr_wr_port; + if (++card->curr_wr_port == card->mp_end_port) + card->curr_wr_port = reg->start_wr_port; + } else { + adapter->data_sent = true; + return -EBUSY; + } + + nxpwifi_dbg(adapter, DATA, + "data: port=%d mp_wr_bitmap=0x%08x -> 0x%08x\n", + *port, wr_bitmap, card->mp_wr_bitmap); + + return 0; +} + +/* This function polls the card status. + */ +static int +nxpwifi_sdio_poll_card_status(struct nxpwifi_adapter *adapter, u8 bits) +{ + struct sdio_mmc_card *card = adapter->card; + u32 tries; + u8 cs; + + for (tries = 0; tries < MAX_POLL_TRIES; tries++) { + if (nxpwifi_read_reg(adapter, card->reg->poll_reg, &cs)) + break; + else if ((cs & bits) == bits) + return 0; + + usleep_range(10, 20); + } + + nxpwifi_dbg(adapter, ERROR, + "poll card status failed, tries = %d\n", tries); + + return -1; +} + +/* This function disables the host interrupt. + * + * The host interrupt mask is read, the disable bit is reset and + * written back to the card host interrupt mask register. + */ +static void nxpwifi_sdio_disable_host_int(struct nxpwifi_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + struct sdio_func *func = card->func; + + sdio_claim_host(func); + nxpwifi_write_reg_locked(func, card->reg->host_int_mask_reg, 0); + sdio_release_irq(func); + sdio_release_host(func); +} + +/* This function reads the interrupt status from card. + */ +static void nxpwifi_interrupt_status(struct nxpwifi_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + u8 sdio_ireg; + unsigned long flags; + + if (nxpwifi_read_data_sync(adapter, card->mp_regs, + card->reg->max_mp_regs, + REG_PORT | NXPWIFI_SDIO_BYTE_MODE_MASK, 0)) { + nxpwifi_dbg(adapter, ERROR, "read mp_regs failed\n"); + return; + } + + sdio_ireg = card->mp_regs[card->reg->host_int_status_reg]; + if (sdio_ireg) { + /* DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS + * For SDIO new mode CMD port interrupts + * DN_LD_CMD_PORT_HOST_INT_STATUS and/or + * UP_LD_CMD_PORT_HOST_INT_STATUS + * Clear the interrupt status register + */ + nxpwifi_dbg(adapter, INTR, + "int: sdio_ireg = %#x\n", sdio_ireg); + spin_lock_irqsave(&adapter->int_lock, flags); + adapter->int_status |= sdio_ireg; + spin_unlock_irqrestore(&adapter->int_lock, flags); + } +} + +/* SDIO interrupt handler. + * + * This function reads the interrupt status from firmware and handles + * the interrupt in current thread (ksdioirqd) right away. + */ +static void +nxpwifi_sdio_interrupt(struct sdio_func *func) +{ + struct nxpwifi_adapter *adapter; + struct sdio_mmc_card *card; + + card = sdio_get_drvdata(func); + if (!card || !card->adapter) { + pr_err("int: func=%p card=%p adapter=%p\n", + func, card, card ? card->adapter : NULL); + return; + } + adapter = card->adapter; + + if (!adapter->pps_uapsd_mode && adapter->ps_state == PS_STATE_SLEEP) + adapter->ps_state = PS_STATE_AWAKE; + + nxpwifi_interrupt_status(adapter); + nxpwifi_main_process(adapter); +} + +/* This function enables the host interrupt. + * + * The host interrupt enable mask is written to the card + * host interrupt mask register. + */ +static int nxpwifi_sdio_enable_host_int(struct nxpwifi_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + struct sdio_func *func = card->func; + int ret; + + sdio_claim_host(func); + + /* Request the SDIO IRQ */ + ret = sdio_claim_irq(func, nxpwifi_sdio_interrupt); + if (ret) { + nxpwifi_dbg(adapter, ERROR, + "claim irq failed: ret=%d\n", ret); + goto out; + } + + /* Simply write the mask to the register */ + ret = nxpwifi_write_reg_locked(func, card->reg->host_int_mask_reg, + card->reg->host_int_enable); + if (ret) { + nxpwifi_dbg(adapter, ERROR, + "enable host interrupt failed\n"); + sdio_release_irq(func); + } + +out: + sdio_release_host(func); + return ret; +} + +/* This function gets a data buffer from the card. + */ +static int nxpwifi_sdio_card_to_host(struct nxpwifi_adapter *adapter, + u32 *type, u8 *buffer, + u32 npayload, u32 ioport) +{ + int ret; + u32 nb; + + if (!buffer) { + nxpwifi_dbg(adapter, ERROR, + "%s: buffer is NULL\n", __func__); + return -1; + } + + ret = nxpwifi_read_data_sync(adapter, buffer, npayload, ioport, 1); + + if (ret) { + nxpwifi_dbg(adapter, ERROR, + "%s: read iomem failed: %d\n", __func__, + ret); + return -1; + } + + nb = get_unaligned_le16((buffer)); + if (nb > npayload) { + nxpwifi_dbg(adapter, ERROR, + "%s: invalid packet, nb=%d npayload=%d\n", + __func__, nb, npayload); + return -1; + } + + *type = get_unaligned_le16((buffer + 2)); + + return ret; +} + +/* This function downloads the firmware to the card. + * + * Firmware is downloaded to the card in blocks. Every block download + * is tested for CRC errors, and retried a number of times before + * returning failure. + */ +static int nxpwifi_prog_fw_w_helper(struct nxpwifi_adapter *adapter, + struct nxpwifi_fw_image *fw) +{ + struct sdio_mmc_card *card = adapter->card; + const struct nxpwifi_sdio_card_reg *reg = card->reg; + int ret; + u8 *firmware = fw->fw_buf; + u32 firmware_len = fw->fw_len; + u32 offset = 0; + u8 base0, base1; + u8 *fwbuf; + u16 len = 0; + u32 txlen, tx_blocks = 0, tries; + u32 i = 0; + + if (!firmware_len) { + nxpwifi_dbg(adapter, ERROR, + "firmware image not found! Terminating download\n"); + return -1; + } + + nxpwifi_dbg(adapter, INFO, + "info: downloading FW image (%d bytes)\n", + firmware_len); + + /* Assume that the allocated buffer is 8-byte aligned */ + fwbuf = kzalloc(NXPWIFI_UPLD_SIZE, GFP_KERNEL); + if (!fwbuf) + return -ENOMEM; + + sdio_claim_host(card->func); + + /* Perform firmware data transfer */ + do { + /* The host polls for the DN_LD_CARD_RDY and CARD_IO_READY + * bits + */ + ret = nxpwifi_sdio_poll_card_status(adapter, CARD_IO_READY | + DN_LD_CARD_RDY); + if (ret) { + nxpwifi_dbg(adapter, ERROR, + "FW download with helper:\t" + "poll status timeout @ %d\n", offset); + goto done; + } + + /* More data? */ + if (offset >= firmware_len) + break; + + for (tries = 0; tries < MAX_POLL_TRIES; tries++) { + ret = nxpwifi_read_reg(adapter, reg->base_0_reg, + &base0); + if (ret) { + nxpwifi_dbg(adapter, ERROR, + "dev BASE0 register read failed:\t" + "base0=%#04X(%d). Terminating dnld\n", + base0, base0); + goto done; + } + ret = nxpwifi_read_reg(adapter, reg->base_1_reg, + &base1); + if (ret) { + nxpwifi_dbg(adapter, ERROR, + "dev BASE1 register read failed:\t" + "base1=%#04X(%d). Terminating dnld\n", + base1, base1); + goto done; + } + len = (u16)(((base1 & 0xff) << 8) | (base0 & 0xff)); + + if (len) + break; + + usleep_range(10, 20); + } + + if (!len) { + break; + } else if (len > NXPWIFI_UPLD_SIZE) { + nxpwifi_dbg(adapter, ERROR, + "FW dnld failed @ %d, invalid length %d\n", + offset, len); + ret = -1; + goto done; + } + + txlen = len; + + if (len & BIT(0)) { + i++; + if (i > MAX_WRITE_IOMEM_RETRY) { + nxpwifi_dbg(adapter, ERROR, + "FW dnld failed @ %d, over max retry\n", + offset); + ret = -1; + goto done; + } + nxpwifi_dbg(adapter, ERROR, + "CRC indicated by the helper:\t" + "len = 0x%04X, txlen = %d\n", len, txlen); + len &= ~BIT(0); + /* Setting this to 0 to resend from same offset */ + txlen = 0; + } else { + i = 0; + + /* Set blocksize to transfer - checking for last + * block + */ + if (firmware_len - offset < txlen) + txlen = firmware_len - offset; + + tx_blocks = (txlen + NXPWIFI_SDIO_BLOCK_SIZE - 1) + / NXPWIFI_SDIO_BLOCK_SIZE; + + /* Copy payload to buffer */ + memmove(fwbuf, &firmware[offset], txlen); + } + + ret = nxpwifi_write_data_sync(adapter, fwbuf, tx_blocks * + NXPWIFI_SDIO_BLOCK_SIZE, + adapter->ioport); + if (ret) { + nxpwifi_dbg(adapter, ERROR, + "FW download, write iomem (%d) failed @ %d\n", + i, offset); + if (nxpwifi_write_reg(adapter, CONFIGURATION_REG, 0x04)) + nxpwifi_dbg(adapter, ERROR, + "write CFG reg failed\n"); + + ret = -1; + goto done; + } + + offset += txlen; + } while (true); + + nxpwifi_dbg(adapter, MSG, + "info: FW download over, size %d bytes\n", offset); + + ret = 0; +done: + sdio_release_host(card->func); + kfree(fwbuf); + return ret; +} + +/* This function decodes sdio aggregation pkt. + * + * Based on the data block size and pkt_len, + * skb data will be decoded to few packets. + */ +static void nxpwifi_deaggr_sdio_pkt(struct nxpwifi_adapter *adapter, + struct sk_buff *skb) +{ + u32 total_pkt_len, pkt_len; + struct sk_buff *skb_deaggr; + u16 blk_size; + u8 blk_num; + u8 *data; + + data = skb->data; + total_pkt_len = skb->len; + + while (total_pkt_len >= (SDIO_HEADER_OFFSET + adapter->intf_hdr_len)) { + if (total_pkt_len < adapter->sdio_rx_block_size) + break; + blk_num = *(data + BLOCK_NUMBER_OFFSET); + blk_size = adapter->sdio_rx_block_size * blk_num; + if (blk_size > total_pkt_len) { + nxpwifi_dbg(adapter, ERROR, + "%s: error in blk_size,\t" + "blk_num=%d, blk_size=%d, total_pkt_len=%d\n", + __func__, blk_num, blk_size, total_pkt_len); + break; + } + pkt_len = get_unaligned_le16((data + + SDIO_HEADER_OFFSET)); + if ((pkt_len + SDIO_HEADER_OFFSET) > blk_size) { + nxpwifi_dbg(adapter, ERROR, + "%s: error in pkt_len,\t" + "pkt_len=%d, blk_size=%d\n", + __func__, pkt_len, blk_size); + break; + } + + skb_deaggr = nxpwifi_alloc_dma_align_buf(pkt_len, GFP_KERNEL); + if (!skb_deaggr) + break; + skb_put(skb_deaggr, pkt_len); + memcpy(skb_deaggr->data, data + SDIO_HEADER_OFFSET, pkt_len); + skb_pull(skb_deaggr, adapter->intf_hdr_len); + + nxpwifi_handle_rx_packet(adapter, skb_deaggr); + data += blk_size; + total_pkt_len -= blk_size; + } +} + +/* This function decodes a received packet. + * + * Based on the type, the packet is treated as either a data, or + * a command response, or an event, and the correct handler + * function is invoked. + */ +static int nxpwifi_decode_rx_packet(struct nxpwifi_adapter *adapter, + struct sk_buff *skb, u32 upld_typ) +{ + u8 *cmd_buf; + u16 pkt_len; + struct nxpwifi_rxinfo *rx_info; + + pkt_len = get_unaligned_le16(skb->data); + + if (upld_typ != NXPWIFI_TYPE_AGGR_DATA) { + skb_trim(skb, pkt_len); + skb_pull(skb, adapter->intf_hdr_len); + } + + switch (upld_typ) { + case NXPWIFI_TYPE_AGGR_DATA: + nxpwifi_dbg(adapter, INFO, + "info: --- Rx: Aggr Data packet ---\n"); + rx_info = NXPWIFI_SKB_RXCB(skb); + rx_info->buf_type = NXPWIFI_TYPE_AGGR_DATA; + if (adapter->rx_work_enabled) { + skb_queue_tail(&adapter->rx_data_q, skb); + atomic_inc(&adapter->rx_pending); + adapter->data_received = true; + } else { + nxpwifi_deaggr_sdio_pkt(adapter, skb); + dev_kfree_skb_any(skb); + } + break; + + case NXPWIFI_TYPE_DATA: + nxpwifi_dbg(adapter, DATA, + "info: --- Rx: Data packet ---\n"); + if (adapter->rx_work_enabled) { + skb_queue_tail(&adapter->rx_data_q, skb); + adapter->data_received = true; + atomic_inc(&adapter->rx_pending); + } else { + nxpwifi_handle_rx_packet(adapter, skb); + } + break; + + case NXPWIFI_TYPE_CMD: + nxpwifi_dbg(adapter, CMD, + "info: --- Rx: Cmd Response ---\n"); + /* take care of curr_cmd = NULL case */ + if (!adapter->curr_cmd) { + cmd_buf = adapter->upld_buf; + + if (adapter->ps_state == PS_STATE_SLEEP_CFM) + nxpwifi_process_sleep_confirm_resp(adapter, + skb->data, + skb->len); + + memcpy(cmd_buf, skb->data, + min_t(u32, NXPWIFI_SIZE_OF_CMD_BUFFER, + skb->len)); + + dev_kfree_skb_any(skb); + } else { + adapter->cmd_resp_received = true; + adapter->curr_cmd->resp_skb = skb; + } + break; + + case NXPWIFI_TYPE_EVENT: + nxpwifi_dbg(adapter, EVENT, + "info: --- Rx: Event ---\n"); + adapter->event_cause = get_unaligned_le32(skb->data); + + if (skb->len > 0 && skb->len < MAX_EVENT_SIZE) + memcpy(adapter->event_body, + skb->data + NXPWIFI_EVENT_HEADER_LEN, + skb->len); + + /* event cause has been saved to adapter->event_cause */ + adapter->event_received = true; + adapter->event_skb = skb; + + break; + + default: + nxpwifi_dbg(adapter, ERROR, + "unknown upload type %#x\n", upld_typ); + dev_kfree_skb_any(skb); + break; + } + + return 0; +} + +/* This function transfers received packets from card to driver, performing + * aggregation if required. + * + * For data received on control port, or if aggregation is disabled, the + * received buffers are uploaded as separate packets. However, if aggregation + * is enabled and required, the buffers are copied onto an aggregation buffer, + * provided there is space left, processed and finally uploaded. + */ +static int nxpwifi_sdio_card_to_host_mp_aggr(struct nxpwifi_adapter *adapter, + u16 rx_len, u8 port) +{ + struct sdio_mmc_card *card = adapter->card; + s32 f_do_rx_aggr = 0; + s32 f_do_rx_cur = 0; + s32 f_aggr_cur = 0; + s32 f_post_aggr_cur = 0; + struct sk_buff *skb_deaggr; + struct sk_buff *skb = NULL; + u32 pkt_len, pkt_type, mport, pind; + u8 *curr_ptr; + + if (!card->mpa_rx.enabled) { + nxpwifi_dbg(adapter, WARN, + "info: %s: rx aggregation disabled\n", + __func__); + + f_do_rx_cur = 1; + goto rx_curr_single; + } + + if (card->mp_rd_bitmap & card->reg->data_port_mask) { + /* Some more data RX pending */ + nxpwifi_dbg(adapter, INFO, + "info: %s: not last packet\n", __func__); + + if (MP_RX_AGGR_IN_PROGRESS(card)) { + if (MP_RX_AGGR_BUF_HAS_ROOM(card, rx_len)) { + f_aggr_cur = 1; + } else { + /* No room in Aggr buf, do rx aggr now */ + f_do_rx_aggr = 1; + f_post_aggr_cur = 1; + } + } else { + /* Rx aggr not in progress */ + f_aggr_cur = 1; + } + + } else { + /* No more data RX pending */ + nxpwifi_dbg(adapter, INFO, + "info: %s: last packet\n", __func__); + + if (MP_RX_AGGR_IN_PROGRESS(card)) { + f_do_rx_aggr = 1; + if (MP_RX_AGGR_BUF_HAS_ROOM(card, rx_len)) + f_aggr_cur = 1; + else + /* No room in Aggr buf, do rx aggr now */ + f_do_rx_cur = 1; + } else { + f_do_rx_cur = 1; + } + } + + if (f_aggr_cur) { + nxpwifi_dbg(adapter, INFO, + "info: current packet aggregation\n"); + /* Curr pkt can be aggregated */ + mp_rx_aggr_setup(card, rx_len, port); + + if (MP_RX_AGGR_PKT_LIMIT_REACHED(card) || + mp_rx_aggr_port_limit_reached(card)) { + nxpwifi_dbg(adapter, INFO, + "info: %s: aggregated packet\t" + "limit reached\n", __func__); + /* No more pkts allowed in Aggr buf, rx it */ + f_do_rx_aggr = 1; + } + } + + if (f_do_rx_aggr) { + u32 port_count; + int i; + + /* do aggr RX now */ + nxpwifi_dbg(adapter, DATA, + "info: do_rx_aggr: num of packets: %d\n", + card->mpa_rx.pkt_cnt); + + for (i = 0, port_count = 0; i < card->max_ports; i++) + if (card->mpa_rx.ports & BIT(i)) + port_count++; + + /* Reading data from "start_port + 0" to "start_port + + * port_count -1", so decrease the count by 1 + */ + port_count--; + mport = (adapter->ioport | SDIO_MPA_ADDR_BASE | + (port_count << 8)) + card->mpa_rx.start_port; + + if (card->mpa_rx.pkt_cnt == 1) + mport = adapter->ioport + card->mpa_rx.start_port; + + if (nxpwifi_read_data_sync(adapter, card->mpa_rx.buf, + card->mpa_rx.buf_len, mport, 1)) + goto error; + + curr_ptr = card->mpa_rx.buf; + + for (pind = 0; pind < card->mpa_rx.pkt_cnt; pind++) { + u32 *len_arr = card->mpa_rx.len_arr; + + /* get curr PKT len & type */ + pkt_len = get_unaligned_le16(&curr_ptr[0]); + pkt_type = get_unaligned_le16(&curr_ptr[2]); + + /* copy pkt to deaggr buf */ + skb_deaggr = nxpwifi_alloc_dma_align_buf(len_arr[pind], + GFP_KERNEL); + if (!skb_deaggr) { + nxpwifi_dbg(adapter, ERROR, "skb allocation failure\t" + "drop pkt len=%d type=%d\n", + pkt_len, pkt_type); + curr_ptr += len_arr[pind]; + continue; + } + + skb_put(skb_deaggr, len_arr[pind]); + + if ((pkt_type == NXPWIFI_TYPE_DATA || + (pkt_type == NXPWIFI_TYPE_AGGR_DATA && + adapter->sdio_rx_aggr_enable)) && + pkt_len <= len_arr[pind]) { + memcpy(skb_deaggr->data, curr_ptr, pkt_len); + + skb_trim(skb_deaggr, pkt_len); + + /* Process de-aggr packet */ + nxpwifi_decode_rx_packet(adapter, skb_deaggr, + pkt_type); + } else { + nxpwifi_dbg(adapter, ERROR, + "drop wrong aggr pkt:\t" + "sdio_single_port_rx_aggr=%d\t" + "type=%d len=%d max_len=%d\n", + adapter->sdio_rx_aggr_enable, + pkt_type, pkt_len, len_arr[pind]); + dev_kfree_skb_any(skb_deaggr); + } + curr_ptr += len_arr[pind]; + } + MP_RX_AGGR_BUF_RESET(card); + } + +rx_curr_single: + if (f_do_rx_cur) { + nxpwifi_dbg(adapter, INFO, "info: RX: port: %d, rx_len: %d\n", + port, rx_len); + + skb = nxpwifi_alloc_dma_align_buf(rx_len, GFP_KERNEL); + if (!skb) { + nxpwifi_dbg(adapter, ERROR, + "single skb allocated fail,\t" + "drop pkt port=%d len=%d\n", port, rx_len); + if (nxpwifi_sdio_card_to_host(adapter, &pkt_type, + card->mpa_rx.buf, rx_len, + adapter->ioport + port)) + goto error; + return 0; + } + + skb_put(skb, rx_len); + + if (nxpwifi_sdio_card_to_host(adapter, &pkt_type, + skb->data, skb->len, + adapter->ioport + port)) + goto error; + if (!adapter->sdio_rx_aggr_enable && + pkt_type == NXPWIFI_TYPE_AGGR_DATA) { + nxpwifi_dbg(adapter, ERROR, "drop wrong pkt type %d\t" + "current SDIO RX Aggr not enabled\n", + pkt_type); + dev_kfree_skb_any(skb); + return 0; + } + + nxpwifi_decode_rx_packet(adapter, skb, pkt_type); + } + if (f_post_aggr_cur) { + nxpwifi_dbg(adapter, INFO, + "info: current packet aggregation\n"); + /* Curr pkt can be aggregated */ + mp_rx_aggr_setup(card, rx_len, port); + } + + return 0; +error: + if (MP_RX_AGGR_IN_PROGRESS(card)) + MP_RX_AGGR_BUF_RESET(card); + + if (f_do_rx_cur && skb) + /* Single transfer pending. Free curr buff also */ + dev_kfree_skb_any(skb); + + return -1; +} + +/* This function checks the current interrupt status. + * + * The following interrupts are checked and handled by this function - + * - Data sent + * - Command sent + * - Packets received + * + * Since the firmware does not generate download ready interrupt if the + * port updated is command port only, command sent interrupt checking + * should be done manually, and for every SDIO interrupt. + * + * In case of Rx packets received, the packets are uploaded from card to + * host and processed accordingly. + */ +static int nxpwifi_process_int_status(struct nxpwifi_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + const struct nxpwifi_sdio_card_reg *reg = card->reg; + int ret = 0; + u8 sdio_ireg; + struct sk_buff *skb; + u8 port; + u32 len_reg_l, len_reg_u; + u32 rx_blocks; + u16 rx_len; + unsigned long flags; + u32 bitmap; + u8 cr; + + spin_lock_irqsave(&adapter->int_lock, flags); + sdio_ireg = adapter->int_status; + adapter->int_status = 0; + spin_unlock_irqrestore(&adapter->int_lock, flags); + + if (!sdio_ireg) + return ret; + + /* Following interrupt is only for SDIO new mode */ + if (sdio_ireg & DN_LD_CMD_PORT_HOST_INT_STATUS && adapter->cmd_sent) + adapter->cmd_sent = false; + + /* Following interrupt is only for SDIO new mode */ + if (sdio_ireg & UP_LD_CMD_PORT_HOST_INT_STATUS) { + u32 pkt_type; + + /* read the len of control packet */ + rx_len = card->mp_regs[reg->cmd_rd_len_1] << 8; + rx_len |= (u16)card->mp_regs[reg->cmd_rd_len_0]; + rx_blocks = DIV_ROUND_UP(rx_len, NXPWIFI_SDIO_BLOCK_SIZE); + if (rx_len <= adapter->intf_hdr_len || + (rx_blocks * NXPWIFI_SDIO_BLOCK_SIZE) > + NXPWIFI_RX_DATA_BUF_SIZE) + return -1; + rx_len = (u16)(rx_blocks * NXPWIFI_SDIO_BLOCK_SIZE); + nxpwifi_dbg(adapter, INFO, "info: rx_len = %d\n", rx_len); + + skb = nxpwifi_alloc_dma_align_buf(rx_len, GFP_KERNEL); + if (!skb) + return -1; + + skb_put(skb, rx_len); + + if (nxpwifi_sdio_card_to_host(adapter, &pkt_type, skb->data, + skb->len, adapter->ioport | + CMD_PORT_SLCT)) { + nxpwifi_dbg(adapter, ERROR, + "%s: failed to card_to_host", __func__); + dev_kfree_skb_any(skb); + goto term_cmd; + } + + if (pkt_type != NXPWIFI_TYPE_CMD && + pkt_type != NXPWIFI_TYPE_EVENT) + nxpwifi_dbg(adapter, ERROR, + "%s:Received wrong packet on cmd port", + __func__); + + nxpwifi_decode_rx_packet(adapter, skb, pkt_type); + } + + if (sdio_ireg & DN_LD_HOST_INT_STATUS) { + bitmap = (u32)card->mp_regs[reg->wr_bitmap_l]; + bitmap |= ((u32)card->mp_regs[reg->wr_bitmap_u]) << 8; + bitmap |= ((u32)card->mp_regs[reg->wr_bitmap_1l]) << 16; + bitmap |= ((u32)card->mp_regs[reg->wr_bitmap_1u]) << 24; + card->mp_wr_bitmap = bitmap; + + nxpwifi_dbg(adapter, INTR, + "int: DNLD: wr_bitmap=0x%x\n", + card->mp_wr_bitmap); + if (adapter->data_sent && + (card->mp_wr_bitmap & card->mp_data_port_mask)) { + nxpwifi_dbg(adapter, INTR, + "info: <--- Tx DONE Interrupt --->\n"); + adapter->data_sent = false; + } + } + + nxpwifi_dbg(adapter, INTR, "info: cmd_sent=%d data_sent=%d\n", + adapter->cmd_sent, adapter->data_sent); + if (sdio_ireg & UP_LD_HOST_INT_STATUS) { + bitmap = (u32)card->mp_regs[reg->rd_bitmap_l]; + bitmap |= ((u32)card->mp_regs[reg->rd_bitmap_u]) << 8; + bitmap |= ((u32)card->mp_regs[reg->rd_bitmap_1l]) << 16; + bitmap |= ((u32)card->mp_regs[reg->rd_bitmap_1u]) << 24; + card->mp_rd_bitmap = bitmap; + nxpwifi_dbg(adapter, INTR, + "int: UPLD: rd_bitmap=0x%x\n", + card->mp_rd_bitmap); + + while (true) { + ret = nxpwifi_get_rd_port(adapter, &port); + if (ret) { + nxpwifi_dbg(adapter, INFO, + "info: no more rd_port available\n"); + break; + } + len_reg_l = reg->rd_len_p0_l + (port << 1); + len_reg_u = reg->rd_len_p0_u + (port << 1); + rx_len = ((u16)card->mp_regs[len_reg_u]) << 8; + rx_len |= (u16)card->mp_regs[len_reg_l]; + nxpwifi_dbg(adapter, INFO, + "info: RX: port=%d rx_len=%u\n", + port, rx_len); + rx_blocks = + (rx_len + NXPWIFI_SDIO_BLOCK_SIZE - + 1) / NXPWIFI_SDIO_BLOCK_SIZE; + if (rx_len <= adapter->intf_hdr_len || + (card->mpa_rx.enabled && + ((rx_blocks * NXPWIFI_SDIO_BLOCK_SIZE) > + card->mpa_rx.buf_size))) { + nxpwifi_dbg(adapter, ERROR, + "invalid rx_len=%d\n", + rx_len); + return -1; + } + + rx_len = (u16)(rx_blocks * NXPWIFI_SDIO_BLOCK_SIZE); + nxpwifi_dbg(adapter, INFO, "info: rx_len = %d\n", + rx_len); + + if (nxpwifi_sdio_card_to_host_mp_aggr(adapter, rx_len, + port)) { + nxpwifi_dbg(adapter, ERROR, + "card_to_host_mpa failed: int status=%#x\n", + sdio_ireg); + goto term_cmd; + } + } + } + + return 0; + +term_cmd: + /* terminate cmd */ + if (nxpwifi_read_reg(adapter, CONFIGURATION_REG, &cr)) + nxpwifi_dbg(adapter, ERROR, "read CFG reg failed\n"); + else + nxpwifi_dbg(adapter, INFO, + "info: CFG reg val = %d\n", cr); + + if (nxpwifi_write_reg(adapter, CONFIGURATION_REG, (cr | 0x04))) + nxpwifi_dbg(adapter, ERROR, + "write CFG reg failed\n"); + else + nxpwifi_dbg(adapter, INFO, "info: write success\n"); + + if (nxpwifi_read_reg(adapter, CONFIGURATION_REG, &cr)) + nxpwifi_dbg(adapter, ERROR, + "read CFG reg failed\n"); + else + nxpwifi_dbg(adapter, INFO, + "info: CFG reg val =%x\n", cr); + + return -1; +} + +/* This function aggregates transmission buffers in driver and downloads + * the aggregated packet to card. + * + * The individual packets are aggregated by copying into an aggregation + * buffer and then downloaded to the card. Previous unsent packets in the + * aggregation buffer are pre-copied first before new packets are added. + * Aggregation is done till there is space left in the aggregation buffer, + * or till new packets are available. + * + * The function will only download the packet to the card when aggregation + * stops, otherwise it will just aggregate the packet in aggregation buffer + * and return. + */ +static int nxpwifi_host_to_card_mp_aggr(struct nxpwifi_adapter *adapter, + u8 *payload, u32 pkt_len, u32 port, + u32 next_pkt_len) +{ + struct sdio_mmc_card *card = adapter->card; + int ret = 0; + s32 f_send_aggr_buf = 0; + s32 f_send_cur_buf = 0; + s32 f_precopy_cur_buf = 0; + s32 f_postcopy_cur_buf = 0; + u32 mport; + int index; + + if (!card->mpa_tx.enabled || port == CMD_PORT_SLCT) { + nxpwifi_dbg(adapter, WARN, + "info: %s: tx aggregation disabled\n", + __func__); + + f_send_cur_buf = 1; + goto tx_curr_single; + } + + if (next_pkt_len) { + /* More pkt in TX queue */ + nxpwifi_dbg(adapter, INFO, + "info: %s: more packets in queue.\n", + __func__); + + if (MP_TX_AGGR_IN_PROGRESS(card)) { + if (MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len)) { + f_precopy_cur_buf = 1; + + if (!(card->mp_wr_bitmap & + (1 << card->curr_wr_port)) || + !MP_TX_AGGR_BUF_HAS_ROOM + (card, pkt_len + next_pkt_len)) + f_send_aggr_buf = 1; + } else { + /* No room in Aggr buf, send it */ + f_send_aggr_buf = 1; + + if (!(card->mp_wr_bitmap & + (1 << card->curr_wr_port))) + f_send_cur_buf = 1; + else + f_postcopy_cur_buf = 1; + } + } else { + if (MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len) && + (card->mp_wr_bitmap & (1 << card->curr_wr_port))) + f_precopy_cur_buf = 1; + else + f_send_cur_buf = 1; + } + } else { + /* Last pkt in TX queue */ + nxpwifi_dbg(adapter, INFO, + "info: %s: Last packet in Tx Queue.\n", + __func__); + + if (MP_TX_AGGR_IN_PROGRESS(card)) { + /* some packs in Aggr buf already */ + f_send_aggr_buf = 1; + + if (MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len)) + f_precopy_cur_buf = 1; + else + /* No room in Aggr buf, send it */ + f_send_cur_buf = 1; + } else { + f_send_cur_buf = 1; + } + } + + if (f_precopy_cur_buf) { + nxpwifi_dbg(adapter, DATA, + "data: %s: precopy current buffer\n", + __func__); + MP_TX_AGGR_BUF_PUT(card, payload, pkt_len, port); + + if (MP_TX_AGGR_PKT_LIMIT_REACHED(card) || + mp_tx_aggr_port_limit_reached(card)) + /* No more pkts allowed in Aggr buf, send it */ + f_send_aggr_buf = 1; + } + + if (f_send_aggr_buf) { + u32 port_count; + int i; + + nxpwifi_dbg(adapter, DATA, + "data: %s: send aggr buffer: %d %d\n", + __func__, card->mpa_tx.start_port, + card->mpa_tx.ports); + + for (i = 0, port_count = 0; i < card->max_ports; i++) + if (card->mpa_tx.ports & BIT(i)) + port_count++; + + /* Writing data from "start_port + 0" to "start_port + + * port_count -1", so decrease the count by 1 + */ + port_count--; + mport = (adapter->ioport | SDIO_MPA_ADDR_BASE | + (port_count << 8)) + card->mpa_tx.start_port; + + if (card->mpa_tx.pkt_cnt == 1) + mport = adapter->ioport + card->mpa_tx.start_port; + + ret = nxpwifi_write_data_to_card(adapter, card->mpa_tx.buf, + card->mpa_tx.buf_len, mport); + + /* Save the last multi port tx aggregation info to debug log */ + index = adapter->dbg.last_sdio_mp_index; + index = (index + 1) % NXPWIFI_DBG_SDIO_MP_NUM; + adapter->dbg.last_sdio_mp_index = index; + adapter->dbg.last_mp_wr_ports[index] = mport; + adapter->dbg.last_mp_wr_bitmap[index] = card->mp_wr_bitmap; + adapter->dbg.last_mp_wr_len[index] = card->mpa_tx.buf_len; + adapter->dbg.last_mp_curr_wr_port[index] = card->curr_wr_port; + + MP_TX_AGGR_BUF_RESET(card); + } + +tx_curr_single: + if (f_send_cur_buf) { + nxpwifi_dbg(adapter, DATA, + "data: %s: send current buffer %d\n", + __func__, port); + ret = nxpwifi_write_data_to_card(adapter, payload, pkt_len, + adapter->ioport + port); + } + + if (f_postcopy_cur_buf) { + nxpwifi_dbg(adapter, DATA, + "data: %s: postcopy current buffer\n", + __func__); + MP_TX_AGGR_BUF_PUT(card, payload, pkt_len, port); + } + + return ret; +} + +/* This function downloads data from driver to card. + * + * Both commands and data packets are transferred to the card by this + * function. + * + * This function adds the SDIO specific header to the front of the buffer + * before transferring. The header contains the length of the packet and + * the type. The firmware handles the packets based upon this set type. + */ +static int nxpwifi_sdio_host_to_card(struct nxpwifi_adapter *adapter, + u8 type, struct sk_buff *skb, + struct nxpwifi_tx_param *tx_param) +{ + struct sdio_mmc_card *card = adapter->card; + int ret; + u32 buf_block_len; + u32 blk_size; + u32 port; + u8 *payload = (u8 *)skb->data; + u32 pkt_len = skb->len; + + /* Allocate buffer and copy payload */ + blk_size = NXPWIFI_SDIO_BLOCK_SIZE; + buf_block_len = (pkt_len + blk_size - 1) / blk_size; + put_unaligned_le16((u16)pkt_len, payload + 0); + put_unaligned_le16((u16)type, payload + 2); + + /* This is SDIO specific header + * u16 length, + * u16 type (NXPWIFI_TYPE_DATA = 0, NXPWIFI_TYPE_CMD = 1, + * NXPWIFI_TYPE_EVENT = 3) + */ + if (type == NXPWIFI_TYPE_DATA) { + ret = nxpwifi_get_wr_port_data(adapter, &port); + if (ret) { + nxpwifi_dbg(adapter, ERROR, + "%s: no wr_port available\n", + __func__); + return ret; + } + } else { + adapter->cmd_sent = true; + /* Type must be NXPWIFI_TYPE_CMD */ + + if (pkt_len <= adapter->intf_hdr_len || + pkt_len > NXPWIFI_UPLD_SIZE) + nxpwifi_dbg(adapter, ERROR, + "%s: payload=%p, nb=%d\n", + __func__, payload, pkt_len); + + port = CMD_PORT_SLCT; + } + + /* Transfer data to card */ + pkt_len = buf_block_len * blk_size; + + if (tx_param) + ret = nxpwifi_host_to_card_mp_aggr(adapter, payload, pkt_len, + port, tx_param->next_pkt_len + ); + else + ret = nxpwifi_host_to_card_mp_aggr(adapter, payload, pkt_len, + port, 0); + + if (ret) { + if (type == NXPWIFI_TYPE_CMD) + adapter->cmd_sent = false; + if (type == NXPWIFI_TYPE_DATA) { + adapter->data_sent = false; + /* restore curr_wr_port in error cases */ + card->curr_wr_port = port; + card->mp_wr_bitmap |= (u32)(1 << card->curr_wr_port); + } + } else { + if (type == NXPWIFI_TYPE_DATA) { + if (!(card->mp_wr_bitmap & (1 << card->curr_wr_port))) + adapter->data_sent = true; + else + adapter->data_sent = false; + } + } + + return ret; +} + +/* This function allocates the MPA Tx and Rx buffers. + */ +static int nxpwifi_alloc_sdio_mpa_buffers(struct nxpwifi_adapter *adapter, + u32 mpa_tx_buf_size, + u32 mpa_rx_buf_size) +{ + struct sdio_mmc_card *card = adapter->card; + u32 rx_buf_size; + int ret = 0; + + card->mpa_tx.buf = kzalloc(mpa_tx_buf_size, GFP_KERNEL); + if (!card->mpa_tx.buf) { + ret = -1; + goto error; + } + + card->mpa_tx.buf_size = mpa_tx_buf_size; + + rx_buf_size = max_t(u32, mpa_rx_buf_size, + (u32)SDIO_MAX_AGGR_BUF_SIZE); + card->mpa_rx.buf = kzalloc(rx_buf_size, GFP_KERNEL); + if (!card->mpa_rx.buf) { + ret = -1; + goto error; + } + + card->mpa_rx.buf_size = rx_buf_size; + +error: + if (ret) { + kfree(card->mpa_tx.buf); + kfree(card->mpa_rx.buf); + card->mpa_tx.buf_size = 0; + card->mpa_rx.buf_size = 0; + card->mpa_tx.buf = NULL; + card->mpa_rx.buf = NULL; + } + + return ret; +} + +/* This function unregisters the SDIO device. + * + * The SDIO IRQ is released, the function is disabled and driver + * data is set to null. + */ +static void +nxpwifi_unregister_dev(struct nxpwifi_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + + if (adapter->card) { + card->adapter = NULL; + sdio_claim_host(card->func); + sdio_disable_func(card->func); + sdio_release_host(card->func); + } +} + +/* This function registers the SDIO device. + * + * SDIO IRQ is claimed, block size is set and driver data is initialized. + */ +static int nxpwifi_register_dev(struct nxpwifi_adapter *adapter) +{ + int ret; + struct sdio_mmc_card *card = adapter->card; + struct sdio_func *func = card->func; + const char *firmware = card->firmware; + + /* save adapter pointer in card */ + card->adapter = adapter; + adapter->tx_buf_size = card->tx_buf_size; + + sdio_claim_host(func); + + /* Set block size */ + ret = sdio_set_block_size(card->func, NXPWIFI_SDIO_BLOCK_SIZE); + sdio_release_host(func); + if (ret) { + nxpwifi_dbg(adapter, ERROR, + "cannot set SDIO block size\n"); + return ret; + } + + /* Select correct firmware (sdsd or sdiouart) firmware based on the strapping + * option + */ + if (card->firmware_sdiouart) { + u8 val; + + nxpwifi_read_reg(adapter, card->reg->host_strap_reg, &val); + if ((val & card->reg->host_strap_mask) == card->reg->host_strap_value) + firmware = card->firmware_sdiouart; + } + strscpy(adapter->fw_name, firmware, sizeof(adapter->fw_name)); + + if (card->fw_dump_enh) { + adapter->mem_type_mapping_tbl = generic_mem_type_map; + adapter->num_mem_types = 1; + } else { + adapter->mem_type_mapping_tbl = mem_type_mapping_tbl; + adapter->num_mem_types = ARRAY_SIZE(mem_type_mapping_tbl); + } + + return 0; +} + +/* This function initializes the SDIO driver. + * + * The following initializations steps are followed - + * - Read the Host interrupt status register to acknowledge + * the first interrupt got from bootloader + * - Disable host interrupt mask register + * - Get SDIO port + * - Initialize SDIO variables in card + * - Allocate MP registers + * - Allocate MPA Tx and Rx buffers + */ +static int nxpwifi_init_sdio(struct nxpwifi_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + const struct nxpwifi_sdio_card_reg *reg = card->reg; + int ret; + u8 sdio_ireg; + + sdio_set_drvdata(card->func, card); + + /* Read the host_int_status_reg for ACK the first interrupt got + * from the bootloader. If we don't do this we get a interrupt + * as soon as we register the irq. + */ + nxpwifi_read_reg(adapter, card->reg->host_int_status_reg, &sdio_ireg); + + /* Get SDIO ioport */ + if (nxpwifi_init_sdio_ioport(adapter)) + return -EIO; + + /* Initialize SDIO variables in card */ + card->mp_rd_bitmap = 0; + card->mp_wr_bitmap = 0; + card->curr_rd_port = reg->start_rd_port; + card->curr_wr_port = reg->start_wr_port; + + card->mp_data_port_mask = reg->data_port_mask; + + card->mpa_tx.buf_len = 0; + card->mpa_tx.pkt_cnt = 0; + card->mpa_tx.start_port = 0; + + card->mpa_tx.enabled = 1; + card->mpa_tx.pkt_aggr_limit = card->mp_agg_pkt_limit; + + card->mpa_rx.buf_len = 0; + card->mpa_rx.pkt_cnt = 0; + card->mpa_rx.start_port = 0; + + card->mpa_rx.enabled = 1; + card->mpa_rx.pkt_aggr_limit = card->mp_agg_pkt_limit; + + /* Allocate buffers for SDIO MP-A */ + card->mp_regs = kzalloc(reg->max_mp_regs, GFP_KERNEL); + if (!card->mp_regs) + return -ENOMEM; + + card->mpa_rx.len_arr = kcalloc(card->mp_agg_pkt_limit, + sizeof(*card->mpa_rx.len_arr), + GFP_KERNEL); + if (!card->mpa_rx.len_arr) { + kfree(card->mp_regs); + return -ENOMEM; + } + + ret = nxpwifi_alloc_sdio_mpa_buffers(adapter, + card->mp_tx_agg_buf_size, + card->mp_rx_agg_buf_size); + + /* Allocate 32k MPA Tx/Rx buffers if 64k memory allocation fails */ + if (ret && (card->mp_tx_agg_buf_size == NXPWIFI_MP_AGGR_BSIZE_MAX || + card->mp_rx_agg_buf_size == NXPWIFI_MP_AGGR_BSIZE_MAX)) { + /* Disable rx single port aggregation */ + adapter->host_disable_sdio_rx_aggr = true; + + ret = nxpwifi_alloc_sdio_mpa_buffers(adapter, + NXPWIFI_MP_AGGR_BSIZE_32K, + NXPWIFI_MP_AGGR_BSIZE_32K); + if (ret) { + /* Disable multi port aggregation */ + card->mpa_tx.enabled = 0; + card->mpa_rx.enabled = 0; + } + } + + adapter->ext_scan = card->can_ext_scan; + return 0; +} + +/* This function resets the MPA Tx and Rx buffers. + */ +static void nxpwifi_cleanup_mpa_buf(struct nxpwifi_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + + MP_TX_AGGR_BUF_RESET(card); + MP_RX_AGGR_BUF_RESET(card); +} + +/* This function cleans up the allocated card buffers. + * + * The following are freed by this function - + * - MP registers + * - MPA Tx buffer + * - MPA Rx buffer + */ +static void nxpwifi_cleanup_sdio(struct nxpwifi_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + + cancel_work_sync(&card->work); + + kfree(card->mp_regs); + kfree(card->mpa_rx.len_arr); + kfree(card->mpa_tx.buf); + kfree(card->mpa_rx.buf); +} + +/* This function updates the MP end port in card. + */ +static void +nxpwifi_update_mp_end_port(struct nxpwifi_adapter *adapter, u16 port) +{ + struct sdio_mmc_card *card = adapter->card; + const struct nxpwifi_sdio_card_reg *reg = card->reg; + int i; + + card->mp_end_port = port; + + card->mp_data_port_mask = reg->data_port_mask; + + if (reg->start_wr_port) { + for (i = 1; i <= card->max_ports - card->mp_end_port; i++) + card->mp_data_port_mask &= + ~(1 << (card->max_ports - i)); + } + + card->curr_wr_port = reg->start_wr_port; + + nxpwifi_dbg(adapter, CMD, + "cmd: mp_end_port %d, data port mask 0x%x\n", + port, card->mp_data_port_mask); +} + +static void nxpwifi_sdio_card_reset_work(struct nxpwifi_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + struct sdio_func *func = card->func; + int ret; + + /* Prepare the adapter for the reset. */ + nxpwifi_shutdown_sw(adapter); + clear_bit(NXPWIFI_IFACE_WORK_DEVICE_DUMP, &card->work_flags); + clear_bit(NXPWIFI_IFACE_WORK_CARD_RESET, &card->work_flags); + + /* Run a HW reset of the SDIO interface. */ + sdio_claim_host(func); + ret = mmc_hw_reset(func->card); + sdio_release_host(func); + + switch (ret) { + case 1: + dev_dbg(&func->dev, "SDIO HW reset asynchronous\n"); + complete_all(adapter->fw_done); + break; + case 0: + ret = nxpwifi_reinit_sw(adapter); + if (ret) + dev_err(&func->dev, "reinit failed: %d\n", ret); + break; + default: + dev_err(&func->dev, "SDIO HW reset failed: %d\n", ret); + break; + } +} + +/* This function read/write firmware */ +static enum +rdwr_status nxpwifi_sdio_rdwr_firmware(struct nxpwifi_adapter *adapter, + u8 doneflag) +{ + struct sdio_mmc_card *card = adapter->card; + int ret, tries; + u8 ctrl_data = 0; + + sdio_writeb(card->func, card->reg->fw_dump_host_ready, + card->reg->fw_dump_ctrl, &ret); + if (ret) { + nxpwifi_dbg(adapter, ERROR, "SDIO Write ERR\n"); + return RDWR_STATUS_FAILURE; + } + for (tries = 0; tries < MAX_POLL_TRIES; tries++) { + ctrl_data = sdio_readb(card->func, card->reg->fw_dump_ctrl, + &ret); + if (ret) { + nxpwifi_dbg(adapter, ERROR, "SDIO read err\n"); + return RDWR_STATUS_FAILURE; + } + if (ctrl_data == FW_DUMP_DONE) + break; + if (doneflag && ctrl_data == doneflag) + return RDWR_STATUS_DONE; + if (ctrl_data != card->reg->fw_dump_host_ready) { + nxpwifi_dbg(adapter, WARN, + "The ctrl reg was changed, re-try again\n"); + sdio_writeb(card->func, card->reg->fw_dump_host_ready, + card->reg->fw_dump_ctrl, &ret); + if (ret) { + nxpwifi_dbg(adapter, ERROR, "SDIO write err\n"); + return RDWR_STATUS_FAILURE; + } + } + usleep_range(100, 200); + } + if (ctrl_data == card->reg->fw_dump_host_ready) { + nxpwifi_dbg(adapter, ERROR, + "Fail to pull ctrl_data\n"); + return RDWR_STATUS_FAILURE; + } + + return RDWR_STATUS_SUCCESS; +} + +/* This function dump firmware memory to file */ +static void nxpwifi_sdio_fw_dump(struct nxpwifi_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + int ret = 0; + unsigned int reg, reg_start, reg_end; + u8 *dbg_ptr, *end_ptr, dump_num, idx, i, read_reg, doneflag = 0; + enum rdwr_status stat; + u32 memory_size; + + if (!card->can_dump_fw) + return; + + for (idx = 0; idx < ARRAY_SIZE(mem_type_mapping_tbl); idx++) { + struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx]; + + if (entry->mem_ptr) { + vfree(entry->mem_ptr); + entry->mem_ptr = NULL; + } + entry->mem_size = 0; + } + + nxpwifi_pm_wakeup_card(adapter); + sdio_claim_host(card->func); + + nxpwifi_dbg(adapter, MSG, "== nxpwifi firmware dump start ==\n"); + + stat = nxpwifi_sdio_rdwr_firmware(adapter, doneflag); + if (stat == RDWR_STATUS_FAILURE) + goto done; + + reg = card->reg->fw_dump_start; + /* Read the number of the memories which will dump */ + dump_num = sdio_readb(card->func, reg, &ret); + if (ret) { + nxpwifi_dbg(adapter, ERROR, "SDIO read memory length err\n"); + goto done; + } + + /* Read the length of every memory which will dump */ + for (idx = 0; idx < dump_num; idx++) { + struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx]; + + stat = nxpwifi_sdio_rdwr_firmware(adapter, doneflag); + if (stat == RDWR_STATUS_FAILURE) + goto done; + + memory_size = 0; + reg = card->reg->fw_dump_start; + for (i = 0; i < 4; i++) { + read_reg = sdio_readb(card->func, reg, &ret); + if (ret) { + nxpwifi_dbg(adapter, ERROR, "SDIO read err\n"); + goto done; + } + memory_size |= (read_reg << i * 8); + reg++; + } + + if (memory_size == 0) { + nxpwifi_dbg(adapter, DUMP, "Firmware dump Finished!\n"); + ret = nxpwifi_write_reg(adapter, + card->reg->fw_dump_ctrl, + FW_DUMP_READ_DONE); + if (ret) { + nxpwifi_dbg(adapter, ERROR, "SDIO write err\n"); + return; + } + break; + } + + nxpwifi_dbg(adapter, DUMP, + "%s_SIZE=0x%x\n", entry->mem_name, memory_size); + entry->mem_ptr = vmalloc(memory_size + 1); + entry->mem_size = memory_size; + if (!entry->mem_ptr) + goto done; + dbg_ptr = entry->mem_ptr; + end_ptr = dbg_ptr + memory_size; + + doneflag = entry->done_flag; + nxpwifi_dbg(adapter, DUMP, + "Start %s output, please wait...\n", + entry->mem_name); + + do { + stat = nxpwifi_sdio_rdwr_firmware(adapter, doneflag); + if (stat == RDWR_STATUS_FAILURE) + goto done; + + reg_start = card->reg->fw_dump_start; + reg_end = card->reg->fw_dump_end; + for (reg = reg_start; reg <= reg_end; reg++) { + *dbg_ptr = sdio_readb(card->func, reg, &ret); + if (ret) { + nxpwifi_dbg(adapter, ERROR, + "SDIO read err\n"); + goto done; + } + if (dbg_ptr < end_ptr) + dbg_ptr++; + else + nxpwifi_dbg(adapter, ERROR, + "Allocated buf not enough\n"); + } + + if (stat != RDWR_STATUS_DONE) + continue; + + nxpwifi_dbg(adapter, DUMP, "%s done: size=0x%tx\n", + entry->mem_name, dbg_ptr - entry->mem_ptr); + break; + } while (1); + } + nxpwifi_dbg(adapter, MSG, "== nxpwifi firmware dump end ==\n"); + +done: + sdio_release_host(card->func); +} + +static void nxpwifi_sdio_generic_fw_dump(struct nxpwifi_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + struct memory_type_mapping *entry = &generic_mem_type_map[0]; + unsigned int reg, reg_start, reg_end; + u8 start_flag = 0, done_flag = 0; + u8 *dbg_ptr, *end_ptr; + enum rdwr_status stat; + int ret = -1, tries; + + if (!card->fw_dump_enh) + return; + + if (entry->mem_ptr) { + vfree(entry->mem_ptr); + entry->mem_ptr = NULL; + } + entry->mem_size = 0; + + nxpwifi_pm_wakeup_card(adapter); + sdio_claim_host(card->func); + + nxpwifi_dbg(adapter, MSG, "== nxpwifi firmware dump start ==\n"); + + stat = nxpwifi_sdio_rdwr_firmware(adapter, done_flag); + if (stat == RDWR_STATUS_FAILURE) + goto done; + + reg_start = card->reg->fw_dump_start; + reg_end = card->reg->fw_dump_end; + for (reg = reg_start; reg <= reg_end; reg++) { + for (tries = 0; tries < MAX_POLL_TRIES; tries++) { + start_flag = sdio_readb(card->func, reg, &ret); + if (ret) { + nxpwifi_dbg(adapter, ERROR, + "SDIO read err\n"); + goto done; + } + if (start_flag == 0) + break; + if (tries == MAX_POLL_TRIES) { + nxpwifi_dbg(adapter, ERROR, + "FW not ready to dump\n"); + ret = -1; + goto done; + } + } + usleep_range(100, 200); + } + + entry->mem_ptr = vmalloc(0xf0000 + 1); + if (!entry->mem_ptr) { + ret = -1; + goto done; + } + dbg_ptr = entry->mem_ptr; + entry->mem_size = 0xf0000; + end_ptr = dbg_ptr + entry->mem_size; + + done_flag = entry->done_flag; + nxpwifi_dbg(adapter, DUMP, + "Start %s output, please wait...\n", entry->mem_name); + + while (true) { + stat = nxpwifi_sdio_rdwr_firmware(adapter, done_flag); + if (stat == RDWR_STATUS_FAILURE) + goto done; + for (reg = reg_start; reg <= reg_end; reg++) { + *dbg_ptr = sdio_readb(card->func, reg, &ret); + if (ret) { + nxpwifi_dbg(adapter, ERROR, + "SDIO read err\n"); + goto done; + } + dbg_ptr++; + if (dbg_ptr >= end_ptr) { + u8 *tmp_ptr; + + tmp_ptr = vmalloc(entry->mem_size + 0x4000 + 1); + if (!tmp_ptr) + goto done; + + memcpy(tmp_ptr, entry->mem_ptr, + entry->mem_size); + vfree(entry->mem_ptr); + entry->mem_ptr = tmp_ptr; + tmp_ptr = NULL; + dbg_ptr = entry->mem_ptr + entry->mem_size; + entry->mem_size += 0x4000; + end_ptr = entry->mem_ptr + entry->mem_size; + } + } + if (stat == RDWR_STATUS_DONE) { + entry->mem_size = dbg_ptr - entry->mem_ptr; + nxpwifi_dbg(adapter, DUMP, "dump %s done size=0x%x\n", + entry->mem_name, entry->mem_size); + ret = 0; + break; + } + } + nxpwifi_dbg(adapter, MSG, "== nxpwifi firmware dump end ==\n"); + +done: + if (ret) { + nxpwifi_dbg(adapter, ERROR, "firmware dump failed\n"); + if (entry->mem_ptr) { + vfree(entry->mem_ptr); + entry->mem_ptr = NULL; + } + entry->mem_size = 0; + } + sdio_release_host(card->func); +} + +static void nxpwifi_sdio_device_dump_work(struct nxpwifi_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + + adapter->devdump_data = vzalloc(NXPWIFI_FW_DUMP_SIZE); + if (!adapter->devdump_data) + return; + + nxpwifi_drv_info_dump(adapter); + if (card->fw_dump_enh) + nxpwifi_sdio_generic_fw_dump(adapter); + else + nxpwifi_sdio_fw_dump(adapter); + nxpwifi_prepare_fw_dump_info(adapter); + nxpwifi_upload_device_dump(adapter); +} + +static void nxpwifi_sdio_work(struct work_struct *work) +{ + struct sdio_mmc_card *card = + container_of(work, struct sdio_mmc_card, work); + + if (test_and_clear_bit(NXPWIFI_IFACE_WORK_DEVICE_DUMP, + &card->work_flags)) + nxpwifi_sdio_device_dump_work(card->adapter); + if (test_and_clear_bit(NXPWIFI_IFACE_WORK_CARD_RESET, + &card->work_flags)) + nxpwifi_sdio_card_reset_work(card->adapter); +} + +/* This function resets the card */ +static void nxpwifi_sdio_card_reset(struct nxpwifi_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + + if (!test_and_set_bit(NXPWIFI_IFACE_WORK_CARD_RESET, &card->work_flags)) + schedule_work(&card->work); +} + +/* This function dumps FW information */ +static void nxpwifi_sdio_device_dump(struct nxpwifi_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + + if (!test_and_set_bit(NXPWIFI_IFACE_WORK_DEVICE_DUMP, + &card->work_flags)) + schedule_work(&card->work); +} + +/* Function to dump SDIO function registers and SDIO scratch registers in case + * of FW crash + */ +static int +nxpwifi_sdio_reg_dump(struct nxpwifi_adapter *adapter, char *drv_buf) +{ + char *p = drv_buf; + struct sdio_mmc_card *cardp = adapter->card; + int ret = 0; + u8 count, func, data, index = 0, size = 0; + u8 reg, reg_start, reg_end; + char buf[256], *ptr; + + if (!p) + return 0; + + nxpwifi_dbg(adapter, MSG, "SDIO register dump start\n"); + + nxpwifi_pm_wakeup_card(adapter); + + sdio_claim_host(cardp->func); + + for (count = 0; count < 5; count++) { + memset(buf, 0, sizeof(buf)); + ptr = buf; + + switch (count) { + case 0: + /* Read the registers of SDIO function0 */ + func = count; + reg_start = 0; + reg_end = 9; + break; + case 1: + /* Read the registers of SDIO function1 */ + func = count; + reg_start = cardp->reg->func1_dump_reg_start; + reg_end = cardp->reg->func1_dump_reg_end; + break; + case 2: + index = 0; + func = 1; + reg_start = cardp->reg->func1_spec_reg_table[index++]; + size = cardp->reg->func1_spec_reg_num; + reg_end = cardp->reg->func1_spec_reg_table[size - 1]; + break; + default: + /* Read the scratch registers of SDIO function1 */ + if (count == 4) + mdelay(100); + func = 1; + reg_start = cardp->reg->func1_scratch_reg; + reg_end = reg_start + NXPWIFI_SDIO_SCRATCH_SIZE; + } + + if (count != 2) + ptr += sprintf(ptr, "SDIO Func%d (%#x-%#x): ", + func, reg_start, reg_end); + else + ptr += sprintf(ptr, "SDIO Func%d: ", func); + + for (reg = reg_start; reg <= reg_end;) { + if (func == 0) + data = sdio_f0_readb(cardp->func, reg, &ret); + else + data = sdio_readb(cardp->func, reg, &ret); + + if (count == 2) + ptr += sprintf(ptr, "(%#x) ", reg); + if (!ret) { + ptr += sprintf(ptr, "%02x ", data); + } else { + ptr += sprintf(ptr, "ERR"); + break; + } + + if (count == 2 && reg < reg_end) + reg = cardp->reg->func1_spec_reg_table[index++]; + else + reg++; + } + + nxpwifi_dbg(adapter, MSG, "%s\n", buf); + p += sprintf(p, "%s\n", buf); + } + + sdio_release_host(cardp->func); + + nxpwifi_dbg(adapter, MSG, "SDIO register dump end\n"); + + return p - drv_buf; +} + +/* sdio device/function initialization, code is extracted + * from init_if handler and register_dev handler. + */ +static void nxpwifi_sdio_up_dev(struct nxpwifi_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + u8 sdio_ireg; + + sdio_claim_host(card->func); + sdio_enable_func(card->func); + sdio_set_block_size(card->func, NXPWIFI_SDIO_BLOCK_SIZE); + sdio_release_host(card->func); + + /* tx_buf_size might be changed to 3584 by firmware during + * data transfer, we will reset to default size. + */ + adapter->tx_buf_size = card->tx_buf_size; + + /* Read the host_int_status_reg for ACK the first interrupt got + * from the bootloader. If we don't do this we get a interrupt + * as soon as we register the irq. + */ + nxpwifi_read_reg(adapter, card->reg->host_int_status_reg, &sdio_ireg); + + if (nxpwifi_init_sdio_ioport(adapter)) + dev_err(&card->func->dev, "error enabling SDIO port\n"); +} + +static struct nxpwifi_if_ops sdio_ops = { + .init_if = nxpwifi_init_sdio, + .cleanup_if = nxpwifi_cleanup_sdio, + .check_fw_status = nxpwifi_check_fw_status, + .check_winner_status = nxpwifi_check_winner_status, + .prog_fw = nxpwifi_prog_fw_w_helper, + .register_dev = nxpwifi_register_dev, + .unregister_dev = nxpwifi_unregister_dev, + .enable_int = nxpwifi_sdio_enable_host_int, + .disable_int = nxpwifi_sdio_disable_host_int, + .process_int_status = nxpwifi_process_int_status, + .host_to_card = nxpwifi_sdio_host_to_card, + .wakeup = nxpwifi_pm_wakeup_card, + .wakeup_complete = nxpwifi_pm_wakeup_card_complete, + + /* SDIO specific */ + .update_mp_end_port = nxpwifi_update_mp_end_port, + .cleanup_mpa_buf = nxpwifi_cleanup_mpa_buf, + .cmdrsp_complete = nxpwifi_sdio_cmdrsp_complete, + .event_complete = nxpwifi_sdio_event_complete, + .dnld_fw = nxpwifi_sdio_dnld_fw, + .card_reset = nxpwifi_sdio_card_reset, + .reg_dump = nxpwifi_sdio_reg_dump, + .device_dump = nxpwifi_sdio_device_dump, + .deaggr_pkt = nxpwifi_deaggr_sdio_pkt, + .up_dev = nxpwifi_sdio_up_dev, +}; + +module_driver(nxpwifi_sdio, sdio_register_driver, sdio_unregister_driver); + +MODULE_AUTHOR("NXP International Ltd."); +MODULE_DESCRIPTION("NXP WiFi SDIO Driver version " SDIO_VERSION); +MODULE_VERSION(SDIO_VERSION); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(IW61X_SDIO_FW_NAME);