diff mbox series

[v3,1/3] wifi: ath12k: Refactor the hardware recovery procedure

Message ID 20240425090307.3233434-2-quic_periyasa@quicinc.com
State New
Headers show
Series wifi: ath12k: Refactor the hardware recovery procedures | expand

Commit Message

Karthikeyan Periyasamy April 25, 2024, 9:03 a.m. UTC
Currently, in multi-wiphy models, the recovery handler access mac80211
HW from the radio/link structure. This will be incorrect for single wiphy
model, as they will hold multiple link/radio structures. To fix this,
access mac80211 HW based on the number of hardware in the SoC/chip. This
approach makes the recovery handler compatible with both multi wiphy and
single wiphy models.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/core.c | 119 +++++++++++++------------
 drivers/net/wireless/ath/ath12k/mac.c  |  23 +++--
 2 files changed, 80 insertions(+), 62 deletions(-)

Comments

Jeff Johnson April 25, 2024, 9:09 p.m. UTC | #1
On 4/25/2024 2:03 AM, Karthikeyan Periyasamy wrote:
> Currently, in multi-wiphy models, the recovery handler access mac80211
> HW from the radio/link structure. This will be incorrect for single wiphy
> model, as they will hold multiple link/radio structures. To fix this,
> access mac80211 HW based on the number of hardware in the SoC/chip. This
> approach makes the recovery handler compatible with both multi wiphy and
> single wiphy models.
> 
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
> 
> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Kalle Valo May 3, 2024, 1:12 p.m. UTC | #2
Karthikeyan Periyasamy <quic_periyasa@quicinc.com> wrote:

> Currently, in multi-wiphy models, the recovery handler access mac80211
> HW from the radio/link structure. This will be incorrect for single wiphy
> model, as they will hold multiple link/radio structures. To fix this,
> access mac80211 HW based on the number of hardware in the SoC/chip. This
> approach makes the recovery handler compatible with both multi wiphy and
> single wiphy models.
> 
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
> 
> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>

3 patches applied to ath-next branch of ath.git, thanks.

ecd509b6f263 wifi: ath12k: Refactor the hardware recovery procedure
9b4e5caaf590 wifi: ath12k: Refactor the hardware state
acaa84009fad wifi: ath12k: Add lock to protect the hardware state
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/core.c b/drivers/net/wireless/ath/ath12k/core.c
index 6663f4e1792d..ae14614c3568 100644
--- a/drivers/net/wireless/ath/ath12k/core.c
+++ b/drivers/net/wireless/ath/ath12k/core.c
@@ -994,9 +994,8 @@  void ath12k_core_halt(struct ath12k *ar)
 static void ath12k_core_pre_reconfigure_recovery(struct ath12k_base *ab)
 {
 	struct ath12k *ar;
-	struct ath12k_pdev *pdev;
 	struct ath12k_hw *ah;
-	int i;
+	int i, j;
 
 	spin_lock_bh(&ab->base_lock);
 	ab->stats.fw_crash_counter++;
@@ -1006,35 +1005,34 @@  static void ath12k_core_pre_reconfigure_recovery(struct ath12k_base *ab)
 		set_bit(ATH12K_FLAG_CRASH_FLUSH, &ab->dev_flags);
 
 	for (i = 0; i < ab->num_hw; i++) {
-		if (!ab->ah[i])
+		ah = ab->ah[i];
+		if (!ah)
 			continue;
 
-		ah = ab->ah[i];
 		ieee80211_stop_queues(ah->hw);
-	}
 
-	for (i = 0; i < ab->num_radios; i++) {
-		pdev = &ab->pdevs[i];
-		ar = pdev->ar;
-		if (!ar || ar->state == ATH12K_STATE_OFF)
-			continue;
+		for (j = 0; j < ah->num_radio; j++) {
+			ar = &ah->radio[j];
+			if (ar->state == ATH12K_STATE_OFF)
+				continue;
 
-		ath12k_mac_drain_tx(ar);
-		complete(&ar->scan.started);
-		complete(&ar->scan.completed);
-		complete(&ar->scan.on_channel);
-		complete(&ar->peer_assoc_done);
-		complete(&ar->peer_delete_done);
-		complete(&ar->install_key_done);
-		complete(&ar->vdev_setup_done);
-		complete(&ar->vdev_delete_done);
-		complete(&ar->bss_survey_done);
-
-		wake_up(&ar->dp.tx_empty_waitq);
-		idr_for_each(&ar->txmgmt_idr,
-			     ath12k_mac_tx_mgmt_pending_free, ar);
-		idr_destroy(&ar->txmgmt_idr);
-		wake_up(&ar->txmgmt_empty_waitq);
+			ath12k_mac_drain_tx(ar);
+			complete(&ar->scan.started);
+			complete(&ar->scan.completed);
+			complete(&ar->scan.on_channel);
+			complete(&ar->peer_assoc_done);
+			complete(&ar->peer_delete_done);
+			complete(&ar->install_key_done);
+			complete(&ar->vdev_setup_done);
+			complete(&ar->vdev_delete_done);
+			complete(&ar->bss_survey_done);
+
+			wake_up(&ar->dp.tx_empty_waitq);
+			idr_for_each(&ar->txmgmt_idr,
+				     ath12k_mac_tx_mgmt_pending_free, ar);
+			idr_destroy(&ar->txmgmt_idr);
+			wake_up(&ar->txmgmt_empty_waitq);
+		}
 	}
 
 	wake_up(&ab->wmi_ab.tx_credits_wq);
@@ -1043,41 +1041,52 @@  static void ath12k_core_pre_reconfigure_recovery(struct ath12k_base *ab)
 
 static void ath12k_core_post_reconfigure_recovery(struct ath12k_base *ab)
 {
+	struct ath12k_hw *ah;
 	struct ath12k *ar;
-	struct ath12k_pdev *pdev;
-	int i;
+	int i, j;
+	u8 restart_count;
 
-	for (i = 0; i < ab->num_radios; i++) {
-		pdev = &ab->pdevs[i];
-		ar = pdev->ar;
-		if (!ar || ar->state == ATH12K_STATE_OFF)
+	for (i = 0; i < ab->num_hw; i++) {
+		ah = ab->ah[i];
+		if (!ah)
 			continue;
 
-		mutex_lock(&ar->conf_mutex);
-
-		switch (ar->state) {
-		case ATH12K_STATE_ON:
-			ar->state = ATH12K_STATE_RESTARTING;
-			ath12k_core_halt(ar);
-			ieee80211_restart_hw(ath12k_ar_to_hw(ar));
-			break;
-		case ATH12K_STATE_OFF:
-			ath12k_warn(ab,
-				    "cannot restart radio %d that hasn't been started\n",
-				    i);
-			break;
-		case ATH12K_STATE_RESTARTING:
-			break;
-		case ATH12K_STATE_RESTARTED:
-			ar->state = ATH12K_STATE_WEDGED;
-			fallthrough;
-		case ATH12K_STATE_WEDGED:
-			ath12k_warn(ab,
-				    "device is wedged, will not restart radio %d\n", i);
-			break;
+		for (j = 0, restart_count = 0; j < ah->num_radio; j++) {
+			ar = &ah->radio[j];
+			if (ar->state == ATH12K_STATE_OFF)
+				continue;
+
+			mutex_lock(&ar->conf_mutex);
+
+			switch (ar->state) {
+			case ATH12K_STATE_ON:
+				ar->state = ATH12K_STATE_RESTARTING;
+				ath12k_core_halt(ar);
+				restart_count++;
+				break;
+			case ATH12K_STATE_OFF:
+				ath12k_warn(ab,
+					    "cannot restart radio %d that hasn't been started\n",
+					    j);
+				break;
+			case ATH12K_STATE_RESTARTING:
+				break;
+			case ATH12K_STATE_RESTARTED:
+				ar->state = ATH12K_STATE_WEDGED;
+				fallthrough;
+			case ATH12K_STATE_WEDGED:
+				ath12k_warn(ab,
+					    "device is wedged, will not restart radio %d\n", j);
+				break;
+			}
+			mutex_unlock(&ar->conf_mutex);
 		}
-		mutex_unlock(&ar->conf_mutex);
+
+		/* Restart after all the link/radio got restart */
+		if (restart_count == ah->num_radio)
+			ieee80211_restart_hw(ah->hw);
 	}
+
 	complete(&ab->driver_recovery);
 }
 
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 56b1f8b6844e..27664845e990 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -7910,26 +7910,33 @@  ath12k_mac_op_reconfig_complete(struct ieee80211_hw *hw,
 	struct ath12k *ar;
 	struct ath12k_base *ab;
 	struct ath12k_vif *arvif;
-	int recovery_count;
+	int recovery_count, i;
 
 	if (reconfig_type != IEEE80211_RECONFIG_TYPE_RESTART)
 		return;
 
-	ar = ath12k_ah_to_ar(ah, 0);
-	ab = ar->ab;
+	for_each_ar(ah, ar, i) {
+		mutex_lock(&ar->conf_mutex);
 
-	mutex_lock(&ar->conf_mutex);
+		if (ar->state != ATH12K_STATE_RESTARTED) {
+			mutex_unlock(&ar->conf_mutex);
+			continue;
+		}
+
+		ab = ar->ab;
 
-	if (ar->state == ATH12K_STATE_RESTARTED) {
 		ath12k_warn(ar->ab, "pdev %d successfully recovered\n",
 			    ar->pdev->pdev_id);
+
 		ar->state = ATH12K_STATE_ON;
 		ieee80211_wake_queues(hw);
 
 		if (ab->is_reset) {
 			recovery_count = atomic_inc_return(&ab->recovery_count);
+
 			ath12k_dbg(ab, ATH12K_DBG_BOOT, "recovery count %d\n",
 				   recovery_count);
+
 			/* When there are multiple radios in an SOC,
 			 * the recovery has to be done for each radio
 			 */
@@ -7948,6 +7955,7 @@  ath12k_mac_op_reconfig_complete(struct ieee80211_hw *hw,
 				   arvif->key_cipher,
 				   arvif->is_up,
 				   arvif->vdev_type);
+
 			/* After trigger disconnect, then upper layer will
 			 * trigger connect again, then the PN number of
 			 * upper layer will be reset to keep up with AP
@@ -7957,13 +7965,14 @@  ath12k_mac_op_reconfig_complete(struct ieee80211_hw *hw,
 			    arvif->vdev_type == WMI_VDEV_TYPE_STA &&
 			    arvif->vdev_subtype == WMI_VDEV_SUBTYPE_NONE) {
 				ieee80211_hw_restart_disconnect(arvif->vif);
+
 				ath12k_dbg(ab, ATH12K_DBG_BOOT,
 					   "restart disconnect\n");
 			}
 		}
-	}
 
-	mutex_unlock(&ar->conf_mutex);
+		mutex_unlock(&ar->conf_mutex);
+	}
 }
 
 static void