@@ -1,7 +1,7 @@
// SPDX-License-Identifier: BSD-3-Clause-Clear
/*
* Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <net/mac80211.h>
@@ -7259,9 +7259,10 @@ static int ath12k_mac_setup_iface_combinations(struct ath12k *ar)
struct ieee80211_iface_combination *combinations;
struct ieee80211_iface_limit *limits;
int n_limits, max_interfaces;
- bool ap, mesh;
+ bool ap, mesh, p2p;
ap = ab->hw_params->interface_modes & BIT(NL80211_IFTYPE_AP);
+ p2p = ab->hw_params->interface_modes & BIT(NL80211_IFTYPE_P2P_DEVICE);
mesh = IS_ENABLED(CONFIG_MAC80211_MESH) &&
ab->hw_params->interface_modes & BIT(NL80211_IFTYPE_MESH_POINT);
@@ -7270,9 +7271,15 @@ static int ath12k_mac_setup_iface_combinations(struct ath12k *ar)
if (!combinations)
return -ENOMEM;
- if (ap || mesh) {
+ if ((ap || mesh) && !p2p) {
n_limits = 2;
max_interfaces = 16;
+ } else if (p2p) {
+ n_limits = 3;
+ if (ap || mesh)
+ max_interfaces = 16;
+ else
+ max_interfaces = 3;
} else {
n_limits = 1;
max_interfaces = 1;
@@ -7287,14 +7294,22 @@ static int ath12k_mac_setup_iface_combinations(struct ath12k *ar)
limits[0].max = 1;
limits[0].types |= BIT(NL80211_IFTYPE_STATION);
- if (ap) {
+ if (ap || mesh || p2p)
limits[1].max = max_interfaces;
+
+ if (ap)
limits[1].types |= BIT(NL80211_IFTYPE_AP);
- }
if (mesh)
limits[1].types |= BIT(NL80211_IFTYPE_MESH_POINT);
+ if (p2p) {
+ limits[1].types |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO);
+ limits[2].max = 1;
+ limits[2].types |= BIT(NL80211_IFTYPE_P2P_DEVICE);
+ }
+
combinations[0].limits = limits;
combinations[0].n_limits = n_limits;
combinations[0].max_interfaces = max_interfaces;
Current interface combination doesn't support P2P mode. Change the combination for P2P mode. Also, there is a bug that when mesh is enabled but ap is not enabled. In this situation, the mesh's max_interface of interface combination won't be set. So assign the max_interfaces for mesh directly. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> --- v2: 1. add Tested-on tag of QCN9274. 2. update copyright. --- drivers/net/wireless/ath/ath12k/mac.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-)