@@ -187,14 +187,19 @@ void mt7615_dma_start(struct mt7615_dev *dev)
if (is_mt7622(&dev->mt76))
mt7622_dma_sched_init(dev);
- if (is_mt7663(&dev->mt76))
+ if (is_mt7663(&dev->mt76)) {
mt7663_dma_sched_init(dev);
+
+ mt76_wr(dev, MT_MCU2HOST_INT_ENABLE, MT7663_MCU_CMD_ERROR_MASK);
+ }
+
}
int mt7615_dma_init(struct mt7615_dev *dev)
{
int rx_ring_size = MT7615_RX_RING_SIZE;
int rx_buf_size = MT_RX_BUF_SIZE;
+ u32 mask;
int ret;
/* Increase buffer size to receive large VHT MPDUs */
@@ -269,8 +274,14 @@ int mt7615_dma_init(struct mt7615_dev *dev)
MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 1000);
/* enable interrupts for TX/RX rings */
- mt7615_irq_enable(dev, MT_INT_RX_DONE_ALL | mt7615_tx_mcu_int_mask(dev) |
- MT_INT_MCU_CMD);
+
+ mask = MT_INT_RX_DONE_ALL | mt7615_tx_mcu_int_mask(dev);
+ if (is_mt7663(&dev->mt76))
+ mask |= MT7663_INT_MCU_CMD;
+ else
+ mask |= MT_INT_MCU_CMD;
+
+ mt7615_irq_enable(dev, mask);
mt7615_dma_start(dev);
@@ -105,6 +105,7 @@ static void mt7615_irq_tasklet(struct tasklet_struct *t)
{
struct mt7615_dev *dev = from_tasklet(dev, t, irq_tasklet);
u32 intr, mask = 0, tx_mcu_mask = mt7615_tx_mcu_int_mask(dev);
+ u32 mcu_int;
mt76_wr(dev, MT_INT_MASK_CSR, 0);
@@ -128,15 +129,23 @@ static void mt7615_irq_tasklet(struct tasklet_struct *t)
if (intr & MT_INT_RX_DONE(1))
napi_schedule(&dev->mt76.napi[1]);
- if (intr & MT_INT_MCU_CMD) {
- u32 val = mt76_rr(dev, MT_MCU_CMD);
+ if (!(intr & (MT_INT_MCU_CMD | MT7663_INT_MCU_CMD)))
+ return;
- if (val & MT_MCU_CMD_ERROR_MASK) {
- dev->reset_state = val;
- ieee80211_queue_work(mt76_hw(dev), &dev->reset_work);
- wake_up(&dev->reset_wait);
- }
+ if (is_mt7663(&dev->mt76)) {
+ mcu_int = mt76_rr(dev, MT_MCU2HOST_INT_STATUS);
+ mcu_int &= MT7663_MCU_CMD_ERROR_MASK;
+ } else {
+ mcu_int = mt76_rr(dev, MT_MCU_CMD);
+ mcu_int &= MT_MCU_CMD_ERROR_MASK;
}
+
+ if (!mcu_int)
+ return;
+
+ dev->reset_state = mcu_int;
+ ieee80211_queue_work(mt76_hw(dev), &dev->reset_work);
+ wake_up(&dev->reset_wait);
}
static u32 __mt7615_reg_addr(struct mt7615_dev *dev, u32 addr)
@@ -47,6 +47,12 @@ static int mt7615_init_hardware(struct mt7615_dev *dev)
if (ret < 0)
return ret;
+ if (is_mt7663(&dev->mt76)) {
+ /* Reset RGU */
+ mt76_clear(dev, MT_MCU_CIRQ_IRQ_SEL(4), BIT(1));
+ mt76_set(dev, MT_MCU_CIRQ_IRQ_SEL(4), BIT(1));
+ }
+
ret = mt7615_dma_init(dev);
if (ret)
return ret;
@@ -210,7 +210,12 @@ EXPORT_SYMBOL_GPL(mt7615_dma_reset);
static void
mt7615_hif_int_event_trigger(struct mt7615_dev *dev, u8 event)
{
- mt76_wr(dev, MT_MCU_INT_EVENT, event);
+ u32 reg = MT_MCU_INT_EVENT;
+
+ if (is_mt7663(&dev->mt76))
+ reg = MT7663_MCU_INT_EVENT;
+
+ mt76_wr(dev, reg, event);
mt7622_trigger_hif_int(dev, true);
mt7622_trigger_hif_int(dev, false);
@@ -61,6 +61,11 @@ enum mt7615_reg_base {
#define MT_MCU_PCIE_REMAP_2_BASE GENMASK(31, 19)
#define MT_PCIE_REMAP_BASE_2 ((dev)->reg_map[MT_PCIE_REMAP_BASE2])
+#define MT_MCU_CIRQ_BASE 0xc0000
+#define MT_MCU_CIRQ(ofs) (MT_MCU_CIRQ_BASE + (ofs))
+
+#define MT_MCU_CIRQ_IRQ_SEL(n) MT_MCU_CIRQ((n) << 2)
+
#define MT_HIF(ofs) ((dev)->reg_map[MT_HIF_BASE] + (ofs))
#define MT_HIF_RST MT_HIF(0x100)
#define MT_HIF_LOGIC_RST_N BIT(4)
@@ -88,6 +93,10 @@ enum mt7615_reg_base {
#define MT_CFG_LPCR_HOST_FW_OWN BIT(0)
#define MT_CFG_LPCR_HOST_DRV_OWN BIT(1)
+#define MT_MCU2HOST_INT_STATUS MT_HIF(0x1f0)
+#define MT_MCU2HOST_INT_ENABLE MT_HIF(0x1f4)
+
+#define MT7663_MCU_INT_EVENT MT_HIF(0x108)
#define MT_MCU_INT_EVENT MT_HIF(0x1f8)
#define MT_MCU_INT_EVENT_PDMA_STOPPED BIT(0)
#define MT_MCU_INT_EVENT_PDMA_INIT BIT(1)
@@ -102,6 +111,7 @@ enum mt7615_reg_base {
#define MT_INT_RX_DONE_ALL GENMASK(1, 0)
#define MT_INT_TX_DONE_ALL GENMASK(19, 4)
#define MT_INT_TX_DONE(_n) BIT((_n) + 4)
+#define MT7663_INT_MCU_CMD BIT(29)
#define MT_INT_MCU_CMD BIT(30)
#define MT_WPDMA_GLO_CFG MT_HIF(0x208)
@@ -138,6 +148,7 @@ enum mt7615_reg_base {
#define MT_MCU_CMD_PDMA_ERROR BIT(27)
#define MT_MCU_CMD_PCIE_ERROR BIT(28)
#define MT_MCU_CMD_ERROR_MASK (GENMASK(5, 1) | GENMASK(28, 24))
+#define MT7663_MCU_CMD_ERROR_MASK GENMASK(5, 2)
#define MT_TX_RING_BASE MT_HIF(0x300)
#define MT_RX_RING_BASE MT_HIF(0x400)
MT7663 uses different bits for communicating reset commands/status between MCU and host. Also add an extra initial reset command. Signed-off-by: Felix Fietkau <nbd@nbd.name> --- .../net/wireless/mediatek/mt76/mt7615/dma.c | 17 +++++++++++--- .../net/wireless/mediatek/mt76/mt7615/mmio.c | 23 +++++++++++++------ .../wireless/mediatek/mt76/mt7615/pci_init.c | 6 +++++ .../wireless/mediatek/mt76/mt7615/pci_mac.c | 7 +++++- .../net/wireless/mediatek/mt76/mt7615/regs.h | 11 +++++++++ 5 files changed, 53 insertions(+), 11 deletions(-)