diff mbox series

[v4,2/4] wcn36xx: Convert to VHT parameter structure on wcn3680

Message ID 20200909153736.2905114-3-bryan.odonoghue@linaro.org
State Superseded
Headers show
Series wcn36xx: Enable VHT when supported | expand

Commit Message

Bryan O'Donoghue Sept. 9, 2020, 3:37 p.m. UTC 
In order to send VHT parameters to wcn3680 we need to pass the extended V1
parameter structures to the firmware. These commands need to have the
version number set to 1.

This patch makes the conversion. The conversion consists of

1. Setting the version number for wcn3680 or leaving it at 0 otherwise
2. Setting the size of the packet header lower for wcn3620 and wcn3660

Once done all three chips can continue to use the same code to pass
parameters to their respective firmware. In the case of the wcn3680 the
passed structures will be slightly larger to accommodate communication of
VHT descriptors.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

---
 drivers/net/wireless/ath/wcn36xx/smd.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

-- 
2.27.0


_______________________________________________
wcn36xx mailing list
wcn36xx@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wcn36xx
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 3adb744b093d..18507b4d3681 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -1428,8 +1428,12 @@  static int wcn36xx_smd_config_sta_v1(struct wcn36xx *wcn,
 	struct wcn36xx_hal_config_sta_req_msg_v1 msg_body;
 	struct wcn36xx_hal_config_sta_params_v1 *sta_params;
 
-	INIT_HAL_MSG(msg_body, WCN36XX_HAL_CONFIG_STA_REQ);
-	msg_body.header.len -= WCN36XX_DIFF_STA_PARAMS_V1_NOVHT;
+	if (wcn->rf_id == RF_IRIS_WCN3680) {
+		INIT_HAL_MSG_V1(msg_body, WCN36XX_HAL_CONFIG_STA_REQ);
+	} else {
+		INIT_HAL_MSG(msg_body, WCN36XX_HAL_CONFIG_STA_REQ);
+		msg_body.header.len -= WCN36XX_DIFF_STA_PARAMS_V1_NOVHT;
+	}
 
 	sta_params = &msg_body.sta_params;
 
@@ -1606,8 +1610,12 @@  static int wcn36xx_smd_config_bss_v1(struct wcn36xx *wcn,
 	if (!msg_body)
 		return -ENOMEM;
 
-	INIT_HAL_MSG((*msg_body), WCN36XX_HAL_CONFIG_BSS_REQ);
-	msg_body->header.len -= WCN36XX_DIFF_BSS_PARAMS_V1_NOVHT;
+	if (wcn->rf_id == RF_IRIS_WCN3680) {
+		INIT_HAL_MSG_V1((*msg_body), WCN36XX_HAL_CONFIG_BSS_REQ);
+	} else {
+		INIT_HAL_MSG((*msg_body), WCN36XX_HAL_CONFIG_BSS_REQ);
+		msg_body->header.len -= WCN36XX_DIFF_BSS_PARAMS_V1_NOVHT;
+	}
 
 	bss = &msg_body->bss_params;
 	sta = &bss->sta;