new file mode 100644
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip WILC wireless devicetree bindings
+
+maintainers:
+ - Adham Abozaeid <adham.abozaeid@microchip.com>
+ - Ajay Singh <ajay.kathat@microchip.com>
+
+description:
+ The wilc1000 chips can be connected via SPI or SDIO. This document
+ describes the binding to connect wilc devices.
+
+properties:
+ compatible:
+ const: microchip,wilc1000
+
+ spi-max-frequency: true
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description: phandle to the clock connected on rtc clock line.
+ maxItems: 1
+
+ clock-names:
+ const: rtc
+
+required:
+ - compatible
+ - interrupts
+
+examples:
+ - |
+ spi1: spi@fc018000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&pioB 21 0>;
+ wifi@0 {
+ compatible = "microchip,wilc1000";
+ spi-max-frequency = <48000000>;
+ reg = <0>;
+ interrupt-parent = <&pioC>;
+ interrupts = <27 0>;
+ clocks = <&pck1>;
+ clock-names = "rtc";
+ };
+ };
+
+ - |
+ mmc1: mmc@fc000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+ non-removable;
+ vmmc-supply = <&vcc_mmc1_reg>;
+ vqmmc-supply = <&vcc_3v3_reg>;
+ bus-width = <4>;
+ wifi@0 {
+ compatible = "microchip,wilc1000";
+ reg = <0>;
+ interrupt-parent = <&pioC>;
+ interrupts = <27 0>;
+ clocks = <&pck1>;
+ clock-names = "rtc";
+ };
+ };