diff mbox series

[08/10] qtnfmac: update channel switch command to support 6GHz band

Message ID 20200127104634.7248-9-sergey.matyukevich.os@quantenna.com
State New
Headers show
Series qtnfmac: update firmware protocol | expand

Commit Message

Sergey Matyukevich Jan. 27, 2020, 10:46 a.m. UTC 
From: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>

With an addition of 6GHz band support, channel number can no longer be
used to uniquely identify a specific channel. Modify channel switch
command to use chandef data.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
---
 drivers/net/wireless/quantenna/qtnfmac/commands.c | 17 +++++++--------
 drivers/net/wireless/quantenna/qtnfmac/qlink.h    | 25 +++++++++++++++++------
 2 files changed, 28 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/quantenna/qtnfmac/commands.c b/drivers/net/wireless/quantenna/qtnfmac/commands.c
index 1271d38e4c7a..31286699a5b7 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/commands.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/commands.c
@@ -2519,6 +2519,7 @@  int qtnf_cmd_send_chan_switch(struct qtnf_vif *vif,
 	struct qlink_cmd_chan_switch *cmd;
 	struct sk_buff *cmd_skb;
 	int ret;
+	u64 flags = 0;
 
 	cmd_skb = qtnf_cmd_alloc_new_cmdskb(mac->macid, vif->vifid,
 					    QLINK_CMD_CHAN_SWITCH,
@@ -2526,19 +2527,19 @@  int qtnf_cmd_send_chan_switch(struct qtnf_vif *vif,
 	if (!cmd_skb)
 		return -ENOMEM;
 
-	qtnf_bus_lock(mac->bus);
+	if (params->radar_required)
+		flags |= QLINK_CHAN_SW_RADAR_REQUIRED;
+
+	if (params->block_tx)
+		flags |= QLINK_CHAN_SW_BLOCK_TX;
 
 	cmd = (struct qlink_cmd_chan_switch *)cmd_skb->data;
-	cmd->channel = cpu_to_le16(params->chandef.chan->hw_value);
-	cmd->radar_required = params->radar_required;
-	cmd->block_tx = params->block_tx;
+	qlink_chandef_cfg2q(&params->chandef, &cmd->channel);
+	cmd->flags = cpu_to_le64(flags);
 	cmd->beacon_count = params->count;
 
+	qtnf_bus_lock(mac->bus);
 	ret = qtnf_cmd_send(mac->bus, cmd_skb);
-	if (ret)
-		goto out;
-
-out:
 	qtnf_bus_unlock(mac->bus);
 
 	return ret;
diff --git a/drivers/net/wireless/quantenna/qtnfmac/qlink.h b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
index 3577482c5076..ab2bfae7ff3e 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/qlink.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
@@ -701,18 +701,31 @@  struct qlink_cmd_reg_notify {
 } __packed;
 
 /**
+ * enum qlink_chan_sw_flags - channel switch control flags
+ *
+ * @QLINK_CHAN_SW_RADAR_REQUIRED: whether radar detection is required on a new
+ *	channel.
+ * @QLINK_CHAN_SW_BLOCK_TX: whether transmissions should be blocked while
+ *	changing a channel.
+ */
+enum qlink_chan_sw_flags {
+	QLINK_CHAN_SW_RADAR_REQUIRED = BIT(0),
+	QLINK_CHAN_SW_BLOCK_TX = BIT(1),
+};
+
+/**
  * struct qlink_cmd_chan_switch - data for QLINK_CMD_CHAN_SWITCH command
  *
- * @channel: channel number according to 802.11 17.3.8.3.2 and Annex J
- * @radar_required: whether radar detection is required on the new channel
- * @block_tx: whether transmissions should be blocked while changing
+ * @channel: channel to switch to.
+ * @flags: flags to control channel switch, bitmap of &enum qlink_chan_sw_flags.
  * @beacon_count: number of beacons until switch
  */
 struct qlink_cmd_chan_switch {
 	struct qlink_cmd chdr;
-	__le16 channel;
-	u8 radar_required;
-	u8 block_tx;
+	struct qlink_chandef channel;
+	__le64 flags;
+	__le32 n_counter_offsets_beacon;
+	__le32 n_counter_offsets_presp;
 	u8 beacon_count;
 	u8 rsvd[3];
 } __packed;