diff mbox series

[2/2] ath11k: add support to configure 6GHz non-ht duplicate transmission

Message ID 1644914581-21682-3-git-send-email-quic_ramess@quicinc.com
State Superseded
Headers show
Series Add support to configure 6GHz non-ht duplicate transmission | expand

Commit Message

Rameshkumar Sundaram Feb. 15, 2022, 8:43 a.m. UTC
A 6GHz AP can decide to transmit Beacon, Broadcast probe response
and FILS discovery frames in a non-HT duplicate PPDU when
operating in non 20MHz Bandwidth to enhance its discoverability.
(IEEE Std 802.11ax‐2021-26.17.2.2)

Send WMI_VDEV_PARAM_6GHZ_PARAMS with enable/disable option to FW
based on he_6g_nonht_dup_beacon_set.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1

Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/mac.c | 38 +++++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath11k/wmi.h |  8 ++++++++
 2 files changed, 46 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 80f8640..307377a 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2915,6 +2915,33 @@  static int ath11k_mac_fils_discovery(struct ath11k_vif *arvif,
 	return ret;
 }
 
+static int ath11k_mac_set_6g_nonht_dup_conf(struct ath11k_vif *arvif,
+					    const struct cfg80211_chan_def *chandef)
+{
+	struct ath11k *ar = arvif->ar;
+	int ret = 0;
+	bool is_nontx_ap = arvif->vif->bss_conf.nontransmitted;
+	enum wmi_phy_mode mode = ath11k_phymodes[chandef->chan->band][chandef->width];
+	bool dup_bcn_enable = arvif->vif->bss_conf.he_6g_nonht_dup_beacon_set;
+
+	if ((arvif->vdev_type == WMI_VDEV_TYPE_AP) && !is_nontx_ap &&
+	    (chandef->chan->band == NL80211_BAND_6GHZ)) {
+		u32 param_id = WMI_VDEV_PARAM_6GHZ_PARAMS;
+		u32 value = 0;
+
+		if (mode > MODE_11AX_HE20 && dup_bcn_enable) {
+			value |= WMI_VDEV_6GHZ_BITMAP_NON_HT_DUPLICATE_BEACON;
+			value |= WMI_VDEV_6GHZ_BITMAP_NON_HT_DUPLICATE_BCAST_PROBE_RSP;
+			value |= WMI_VDEV_6GHZ_BITMAP_NON_HT_DUPLICATE_FD_FRAME;
+		}
+		ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "Set 6GHz non-ht dup params for "
+			   "vdev %pM vdev_id %d param %d value %d\n", arvif->vif->addr,
+			   arvif->vdev_id, param_id, value);
+		ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, param_id, value);
+	}
+	return ret;
+}
+
 static int ath11k_mac_config_obss_pd(struct ath11k *ar,
 				     struct ieee80211_he_obss_pd *he_obss_pd)
 {
@@ -3129,6 +3156,17 @@  static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
 			arvif->do_not_send_tmpl = true;
 		else
 			arvif->do_not_send_tmpl = false;
+
+		if (vif->type == NL80211_IFTYPE_AP && vif->bss_conf.he_support) {
+			if (!ath11k_mac_vif_chan(arvif->vif, &def)) {
+				ret = ath11k_mac_set_6g_nonht_dup_conf(arvif, &def);
+				if (ret) {
+					ath11k_warn(ar->ab, "failed to set 6G non-ht dup"
+						    " conf for vdev %d: %d\n",
+						    arvif->vdev_id, ret);
+				}
+			}
+		}
 	}
 
 	if (changed & (BSS_CHANGED_BEACON_INFO | BSS_CHANGED_BEACON)) {
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 2f26ec1a..96ed891 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2125,6 +2125,14 @@  enum {
 /* preablbe short */
 #define WMI_VDEV_PREAMBLE_SHORT         0x2
 
+/** 6GHZ params **/
+/* Control to enable/disable beacon tx in non-HT duplicate */
+#define WMI_VDEV_6GHZ_BITMAP_NON_HT_DUPLICATE_BEACON		BIT(0)
+/* Control to enable/disable broadcast probe response tx in non-HT duplicate */
+#define WMI_VDEV_6GHZ_BITMAP_NON_HT_DUPLICATE_BCAST_PROBE_RSP	BIT(1)
+/* Control to enable/disable FILS discovery frame tx in non-HT duplicate */
+#define WMI_VDEV_6GHZ_BITMAP_NON_HT_DUPLICATE_FD_FRAME		BIT(2)
+
 enum wmi_peer_smps_state {
 	WMI_PEER_SMPS_PS_NONE = 0x0,
 	WMI_PEER_SMPS_STATIC  = 0x1,