diff mbox series

[7/9] mt76: mt7921: consider the invalid value for to_rssi

Message ID 1620659697-12048-7-git-send-email-sean.wang@mediatek.com
State New
Headers show
Series None | expand

Commit Message

Sean Wang May 10, 2021, 3:14 p.m. UTC
From: Sean Wang <sean.wang@mediatek.com>

It is possible the RCPI from the certain antenna is an invalid value,
especially packets are receiving while the system is frequently entering
deep sleep mode, so consider calculating RSSI with the reasonable upper
bound to avoid report the wrong value to the mac80211 layer.

Fixes: 163f4d22c118 ("mt76: mt7921: add MAC support")
Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
index 44b8918db95b..89a09381cfe4 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
@@ -461,16 +461,19 @@  int mt7921_mac_fill_rx(struct mt7921_dev *dev, struct sk_buff *skb)
 		status->chain_signal[1] = to_rssi(MT_PRXV_RCPI1, v1);
 		status->chain_signal[2] = to_rssi(MT_PRXV_RCPI2, v1);
 		status->chain_signal[3] = to_rssi(MT_PRXV_RCPI3, v1);
-		status->signal = status->chain_signal[0];
-
-		for (i = 1; i < hweight8(mphy->antenna_mask); i++) {
-			if (!(status->chains & BIT(i)))
+		status->signal = -128;
+		for (i = 0; i < hweight8(mphy->antenna_mask); i++) {
+			if (!(status->chains & BIT(i)) ||
+			    status->chain_signal[i] >= 0)
 				continue;
 
 			status->signal = max(status->signal,
 					     status->chain_signal[i]);
 		}
 
+		if (status->signal == -128)
+			status->flag |= RX_FLAG_NO_SIGNAL_VAL;
+
 		stbc = FIELD_GET(MT_PRXV_STBC, v0);
 		gi = FIELD_GET(MT_PRXV_SGI, v0);
 		cck = false;