| Message ID | 20201020125817.1632995-1-Jerome.Pouiller@silabs.com |
|---|---|
| Headers | show |
| Series | wfx: get out from the staging area | expand |
On Tue, 20 Oct 2020 at 14:58, Jerome Pouiller <Jerome.Pouiller@silabs.com> wrote: > > From: Jérôme Pouiller <jerome.pouiller@silabs.com> > > Add Silabs SDIO ID to sdio_ids.h. > > Note that the values used by Silabs are uncommon. A driver cannot fully > rely on the SDIO PnP. It should also check if the device is declared in > the DT. > > Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Kind regards Uffe > --- > include/linux/mmc/sdio_ids.h | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h > index 12036619346c..20a48162f7fc 100644 > --- a/include/linux/mmc/sdio_ids.h > +++ b/include/linux/mmc/sdio_ids.h > @@ -25,6 +25,11 @@ > * Vendors and devices. Sort key: vendor first, device next. > */ > > +// Silabs does not use a reliable vendor ID. To avoid conflicts, the driver > +// won't probe the device if it is not also declared in the DT. > +#define SDIO_VENDOR_ID_SILABS 0x0000 > +#define SDIO_DEVICE_ID_SILABS_WF200 0x1000 > + > #define SDIO_VENDOR_ID_STE 0x0020 > #define SDIO_DEVICE_ID_STE_CW1200 0x2280 > > -- > 2.28.0 >
From: Jérôme Pouiller <jerome.pouiller@silabs.com> I think the wfx driver is now mature enough to be accepted in the drivers/net/wireless directory. As requested by Kalle[1], I send one file per patch. At the end, all the patches (or at least the patches 3 to 24) will be squashed (therefore, I didn't bother to write real commit messages). Here is a diagram of the global architecture that may help to understand the code: ,------------------------------------. | mac80211 | `------------------------------------' ,------------+-----------+-----------. | sta | | | | scan | | | | main | | | +------------+ data_tx | | | key | | data_rx | | hif_tx_mib | queue | | | hif_tx | | | | hif_rx | | | | hif_api_* | | | +------------+-----------+-----------+--------. | bh | fwio | +------------------------------------+--------+ | hwio | +---------------------------------------------+ | bus_sdio | | bus_spi | `---------------------------------------------' ,---------------------------------------------. | spi / sdio | `---------------------------------------------' Roughly, I have sent the files from the bottom to the top. Below the differences with the files from drivers/staging/wfx/: v2: - dt-bindings: Improve device description and add link to the datasheet (Rob) - dt-bindings: Add blank lines between each DT property (Rob) - dt-bindings: Explicitly mention mac-address and local-mac-address and add references to ethernet-controller.yaml (Rob) - dt-bindings: "config-file" is not for development/debug (Rob) - dt-bindings: Remove description of "spi-max-frequency" (Rob) - dt-bindings: Use "folded scalar" syntax instead of escaping the colons - bus_sdio.c: A compatible node in the DT is now mandatory to probe the device. Also change documentation of dt-bindings accordingly (Pali, Ulf) - bus_sdio.c: Move SDIO IDs to sdio_ids.h (Pali) - bh.c: Import patch "staging: wfx: fix test on return value of gpiod_get_value()" (Nathan) - data_tx.c: Import patch "staging: wfx: fix use of uninitialized pointer" - sta.c: Import patch "staging: wfx: make a const array static, makes object smaller" (Colin) v1: - Drop the function name in the warning message (Kalle) - Replace goto by return in wfx_send_pdata_pds() (Kalle, Dan) - Improve error label in wfx_send_pdata_pds() (Kalle) [1] https://lore.kernel.org/lkml/87ft6p2n0h.fsf@codeaurora.org/ Jérôme Pouiller (24): mmc: sdio: add SDIO IDs for Silabs WF200 chip dt-bindings: introduce silabs,wfx.yaml wfx: add Makefile/Kconfig wfx: add wfx.h wfx: add main.c/main.h wfx: add bus.h wfx: add bus_spi.c wfx: add bus_sdio.c wfx: add hwio.c/hwio.h wfx: add fwio.c/fwio.h wfx: add bh.c/bh.h wfx: add hif_api_*.h wfx: add hif_tx*.c/hif_tx*.h wfx: add key.c/key.h wfx: add hif_rx.c/hif_rx.h wfx: add data_rx.c/data_rx.h wfx: add queue.c/queue.h wfx: add data_tx.c/data_tx.h wfx: add sta.c/sta.h wfx: add scan.c/scan.h wfx: add debug.c/debug.h wfx: add traces.h wfx: remove from the staging area wfx: get out from the staging area .../bindings/net/wireless/silabs,wfx.yaml | 60 +++++++++++-------- MAINTAINERS | 3 +- drivers/net/wireless/Kconfig | 1 + drivers/net/wireless/Makefile | 1 + drivers/net/wireless/silabs/Kconfig | 18 ++++++ drivers/net/wireless/silabs/Makefile | 3 + .../wireless/silabs}/wfx/Kconfig | 0 .../wireless/silabs}/wfx/Makefile | 0 .../{staging => net/wireless/silabs}/wfx/bh.c | 2 +- .../{staging => net/wireless/silabs}/wfx/bh.h | 0 .../wireless/silabs}/wfx/bus.h | 0 .../wireless/silabs}/wfx/bus_sdio.c | 19 ++---- .../wireless/silabs}/wfx/bus_spi.c | 0 .../wireless/silabs}/wfx/data_rx.c | 0 .../wireless/silabs}/wfx/data_rx.h | 0 .../wireless/silabs}/wfx/data_tx.c | 10 ++-- .../wireless/silabs}/wfx/data_tx.h | 0 .../wireless/silabs}/wfx/debug.c | 0 .../wireless/silabs}/wfx/debug.h | 0 .../wireless/silabs}/wfx/fwio.c | 0 .../wireless/silabs}/wfx/fwio.h | 0 .../wireless/silabs}/wfx/hif_api_cmd.h | 0 .../wireless/silabs}/wfx/hif_api_general.h | 0 .../wireless/silabs}/wfx/hif_api_mib.h | 0 .../wireless/silabs}/wfx/hif_rx.c | 0 .../wireless/silabs}/wfx/hif_rx.h | 0 .../wireless/silabs}/wfx/hif_tx.c | 0 .../wireless/silabs}/wfx/hif_tx.h | 0 .../wireless/silabs}/wfx/hif_tx_mib.c | 0 .../wireless/silabs}/wfx/hif_tx_mib.h | 0 .../wireless/silabs}/wfx/hwio.c | 0 .../wireless/silabs}/wfx/hwio.h | 0 .../wireless/silabs}/wfx/key.c | 0 .../wireless/silabs}/wfx/key.h | 0 .../wireless/silabs}/wfx/main.c | 7 +-- .../wireless/silabs}/wfx/main.h | 0 .../wireless/silabs}/wfx/queue.c | 0 .../wireless/silabs}/wfx/queue.h | 0 .../wireless/silabs}/wfx/scan.c | 0 .../wireless/silabs}/wfx/scan.h | 0 .../wireless/silabs}/wfx/sta.c | 2 +- .../wireless/silabs}/wfx/sta.h | 0 .../wireless/silabs}/wfx/traces.h | 0 .../wireless/silabs}/wfx/wfx.h | 0 drivers/staging/Kconfig | 2 - drivers/staging/Makefile | 1 - drivers/staging/wfx/TODO | 6 -- include/linux/mmc/sdio_ids.h | 5 ++ 48 files changed, 78 insertions(+), 62 deletions(-) rename {drivers/staging/wfx/Documentation => Documentation}/devicetree/bindings/net/wireless/silabs,wfx.yaml (76%) create mode 100644 drivers/net/wireless/silabs/Kconfig create mode 100644 drivers/net/wireless/silabs/Makefile rename drivers/{staging => net/wireless/silabs}/wfx/Kconfig (100%) rename drivers/{staging => net/wireless/silabs}/wfx/Makefile (100%) rename drivers/{staging => net/wireless/silabs}/wfx/bh.c (99%) rename drivers/{staging => net/wireless/silabs}/wfx/bh.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/bus.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/bus_sdio.c (91%) rename drivers/{staging => net/wireless/silabs}/wfx/bus_spi.c (100%) rename drivers/{staging => net/wireless/silabs}/wfx/data_rx.c (100%) rename drivers/{staging => net/wireless/silabs}/wfx/data_rx.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/data_tx.c (99%) rename drivers/{staging => net/wireless/silabs}/wfx/data_tx.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/debug.c (100%) rename drivers/{staging => net/wireless/silabs}/wfx/debug.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/fwio.c (100%) rename drivers/{staging => net/wireless/silabs}/wfx/fwio.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/hif_api_cmd.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/hif_api_general.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/hif_api_mib.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/hif_rx.c (100%) rename drivers/{staging => net/wireless/silabs}/wfx/hif_rx.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/hif_tx.c (100%) rename drivers/{staging => net/wireless/silabs}/wfx/hif_tx.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/hif_tx_mib.c (100%) rename drivers/{staging => net/wireless/silabs}/wfx/hif_tx_mib.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/hwio.c (100%) rename drivers/{staging => net/wireless/silabs}/wfx/hwio.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/key.c (100%) rename drivers/{staging => net/wireless/silabs}/wfx/key.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/main.c (99%) rename drivers/{staging => net/wireless/silabs}/wfx/main.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/queue.c (100%) rename drivers/{staging => net/wireless/silabs}/wfx/queue.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/scan.c (100%) rename drivers/{staging => net/wireless/silabs}/wfx/scan.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/sta.c (99%) rename drivers/{staging => net/wireless/silabs}/wfx/sta.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/traces.h (100%) rename drivers/{staging => net/wireless/silabs}/wfx/wfx.h (100%) delete mode 100644 drivers/staging/wfx/TODO