mbox series

[v3,0/3] Add support to configure beacon tx mode

Message ID 1623164643-7803-1-git-send-email-mkenna@codeaurora.org
Headers show
Series Add support to configure beacon tx mode | expand

Message

Maharaja Kennadyrajan June 8, 2021, 3:04 p.m. UTC 
Add support to configure the beacon tx mode as STAGGERED
or BURST mode via hostapd configuration during the AP
bring-up or via wpa_suppplicant configuration during MESH
bring-up.

Beacons can be sent out in burst(continuously in a single shot
one after another) or staggered (equally spread out over beacon
interval) mode.

V3: Addressed Johnson's comment on v2 patch.

V2: Addressed Johannes's comment on v1 patch.

Maharaja Kennadyrajan (3):
  nl80211: Add support for beacon tx mode
  mac80211: Add support for beacon tx mode
  ath11k: Add support for beacon tx mode

 drivers/net/wireless/ath/ath11k/mac.c | 10 +++++++---
 include/net/cfg80211.h                |  4 ++++
 include/net/mac80211.h                |  2 ++
 include/uapi/linux/nl80211.h          | 16 ++++++++++++++++
 net/mac80211/cfg.c                    |  2 ++
 net/wireless/nl80211.c                |  9 +++++++++
 6 files changed, 40 insertions(+), 3 deletions(-)